Back in the day, when the first after market axles became available from Henry's Machine in LA, they were 29 spline as I recall. They would twist badly, so we swapped them side to side after so many runs. At least they didn't break like stock GM axles would.
Put some ski's on the front of the Mustang. Measure to the lowest point weld a tube with 1/4 inch plate weld to it. Set it 1/8 of an inch lower than the pipe hitting. I'd grind the front edge to give it cleaner contact start
Those brakes are cool looking but I can't see double price compared to the other tried and true brands.. Wilwood, Strange and Areospace. The zero drag is awesome but $800 more than everybody else.. That very little drag that most brakes have for a split second, can't be hurting 60 foot or total ET as much as spending that much more money. Just my opinion
This is a multi hundred thousand dollar race car, not some civic with a fart can owned by a kid. Cutting a coil off of these drag racing springs will ruin them. They are designed for the specific compression height with the coilover. But go ahead, cut a coil off your 1000 dollar or more each Penske coilover. Smh
Ok, lessee.......3000 herspers and it's NOT fast enough? It's a 3 second car if the chassis gets sorted and Randy stays in it. Should do a record......3.60s
Like the old saying, you snooze you loose. Keep grinding guys! 💪
Love the videos you guys do a great job and lord it’s good to see Randy rolling and winning and smiling
Uncle Mike, is the man!
Back in the day, when the first after market axles became available from Henry's Machine in LA, they were 29 spline as I recall. They would twist badly, so we swapped them side to side after so many runs. At least they didn't break like stock GM axles would.
🎉🎉 makes sense the way you explained it🎉🎉
Sweet you figured out how to turn caps lock off 🎉
What a ride beautiful and fast. From Texas keep up the great work. 😎👍🇺🇸
1.17 on 60foot..still not quick..wow what the hell you guys want more..this machine is fast bro..i cannot wait to see this car run more faster💪👍
We went 1.10, but need to go 1.06 on great surfaces.
Hey John that glue for the driveshaft is 3M 8115 Bond
Put some ski's on the front of the Mustang. Measure to the lowest point weld a tube with 1/4 inch plate weld to it. Set it 1/8 of an inch lower than the pipe hitting. I'd grind the front edge to give it cleaner contact start
Low rider channel problem is the best place to look.
I, dont know much your racing but I hope the 28 spline pinion holds up.🙂 Be, safe!
Love your car Randy am Chevy man
Ok Thanks
That car is going to need wings next!🤩💪🤩💪
It's nice to see randy smiling for a change lol
PMR to the front. Lets Gooooooooooo!! 💪💪
Weld a strip of metal on the bottom of the pipes where they are scraping. It will act as a skid plate.
LOTS of heavy rain in DFW area for last 12 hours and more coming. Hope it doesn’t get out your way during race time.
Rained out this weekend
Those brakes are cool looking but I can't see double price compared to the other tried and true brands.. Wilwood, Strange and Areospace. The zero drag is awesome but $800 more than everybody else.. That very little drag that most brakes have for a split second, can't be hurting 60 foot or total ET as much as spending that much more money. Just my opinion
Time for a Lock-up.
Do you machine your rotors
Hi hope it can hang on for a pass or 2
Looks killer sitting lower
When, will ya'll be at Coastal plains, Jacksonville, N.C.? I'd like to go.
Canceled this weekend.
"Thats normal right?" "If you aint bendin anything you aint leanin on it" lol
😂
Im betting it's some type of epoxy adhesive🤘
When did Adam lambert quick singing and start building bad ass shocks ?
😂
Raccoons aren't very pleased right now!!
Let's Gooooooo
I didn't ever hear what kind of gear you were running to start with heard that you put in a 389 what was in there before
3.70
What gear was in it?
3.70
Did you intentionally leave your driveshaft sensor ring off the pinion yolk
Yes
John you going to be at war in the woods
No, not gonna make it.
Your bolts on the back of the track rods are too short and the lock nuts may as well not be on there as there is no thread for them to lock onto
I bet Randy played college football.
He played pro football
What engine is in that mustang
Small block Ford.
@@danmyers9372 427 small block ford hell yeah
Just cut a coil of the spring
This is a multi hundred thousand dollar race car, not some civic with a fart can owned by a kid. Cutting a coil off of these drag racing springs will ruin them. They are designed for the specific compression height with the coilover. But go ahead, cut a coil off your 1000 dollar or more each Penske coilover. Smh
Make it faster
Pretty sure Mike hill cancelled already
Ok, lessee.......3000 herspers and it's NOT fast enough? It's a 3 second car if the chassis gets sorted and Randy stays in it. Should do a record......3.60s
3.60s is a stretch that would be a top of the pack 275 car…3.90s is where im assuming the PB is but usually its a 4.0 - 4.1x car
@Turbo John watch Beater Bomb mustang roll out! He flying 🥇
Yes, he’s super fast