How to Replace Spark Plugs 2008-2012 Honda Accord 2.4L
HTML-код
- Опубликовано: 11 окт 2024
- Buy Now!
New Spark Plug Set from 1AAuto.com 1aau.to/ia/NGET...
This video shows you how to install spark plugs on your 2008-2012 Honda Accord (2.4L). Spark is one of the four required components for an internal combustion engine to run. If your spark plugs are failing, worn, or dirty, you may experience rough starts, rough idle, poor performance, or poor mileage.
This process should be similar on the following vehicles:
2008 Honda Accord
2009 Honda Accord
2010 Honda Accord
2011 Honda Accord
2012 Honda Accord
Tools you will need:
• 10mm Socket 1aau.to/ovZ/1AX...
• 16mm Socket 1aau.to/ozW/1AX...
• 5/8 Inch Spark Plug Socket
• Ratchet 1aau.to/oCh/1AX...
• Socket Extensions 1aau.to/ozW/1AX...
• Torque Wrench 1aau.to/oqI/1AX...
• Dielectric Grease
Subscribe: / @trq
Check out our playlist:
Honda Accord 2008-12 8th Gen: • Honda Accord 2008-12 8...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
So easy!! Thank you!!
AND AN FYI FOR VIEWERS:
I’m dumb and didn’t realize mild heat takes away magnetism so if your magnetic spark plug socket suddenly stops connecting to your spark plugs, let it cool down 😂 I worked on plugs after having driven so my car was hot. I almost thought I had a bullshit plug but my magnet worked again after having cooled off lol
Is lubricating the spark plug threads advisable? An old BMW (Motorcycle) friend used to do this, and would swear by it.
Also, do any spark plugs need to be gapped anymore?
My ratchet doesn’t pull the plug out with it. How do you get the plugs out?
The check engine and vsa lights came on after I did this. How can I fix this? 😬
As always, videos rarely show you what could go wrong.
The primary issue with a spark plug installation is getting the socket off after you've torqued the spark plug. Many times the rubber boot in the socket is too tight, and it won't let go of the plug.
Squirt a bit of WD40 in the rubber boot, but not too much.
what a beautifully edited video
praise!!!
+Tracey Pettinato Thanks for watching our video! 1aau.to/m/Shop-TRQ
What are the chances I do this wrong and how dangerous would that be?
Thank you so much for this and all your videos!!!
Where is located glow plugs in I-dtec ((2.2) version 2012 ?
Sparkplug replacement number?
thanks