Got a few days in this week. Also had a few problems this week, over heating dredge, dredge beaching itself and Nelly finds his wee spider friend again...
you definitely need a flap on your nozzle, to break suction at the intake point in case you get detained by it. a guy who dredged for my dad, managed to get both hands/arms up past the elbows into the nozzle of an 8"(necked down to 7") running @ full throttle. it then was going to pull the regulator out of his mouth followed by his lungs. the diver was upside down being jammed up against the rib of the hole being worked by the strong current and was in a very serious life or death situation. I being the last one in came to find this happening and pounced for the flap on the nozzle and broke suction just as it took his regulator. and come to find out that the sharp edges of steel inside the nozzle (newly built custom 8") that deeply lacerated his arms through his wetsuit and was drawing the blood out of his system, quickly pulled free from the nozzles tremendous suction power.
oh, he lived and was incredibly beaten up by the 8" dredge nozzle (necked down to 7")when I saw him next half his face was purple and bruised, he broke several teeth from biting the regulators mouth piece keeping it from being sucked in, 20+ stitches for the lacerations and horrifically wounded pride. without that flap he would be dead
Wouldn't have been easier to shut the motor down. We always dive with 2 people, and the guy running the dredge at the time would just turn the power down..
@@12madcow was 2 divers and had throttle control on the nozzle too. the orientation of the nozzle was such that access to it was impossible with dude sucked into the end and the flap was closer than the shut-off. couldn't see anything was wrong because the water was "smoked out" until I got to him and then took a second to actually figure out what was going on, at 1st i thought he was playing around, cuz i had no idea this was even possible. my dad gave a quick tutorial to the crew and we were off and running kinda atmosphere
Doing the hard yards there boys Just watch both end to end !! those bloody spiders love you I recon mate they keep trying to jump on you !! ha ha !! hope you got some good colour there looked like a awesome spot !! Good luck on the next spot hey ! Cheers bru !! :)
@@12madcow you have good velocity at the nozzle , your pump is well sized for the hose , alot of guys F** that up by going to a hose thats too big and losing suction. are you using proline or keene pumps and what size ?
Lovely Gold Gents! Where did you get that spiral from please? I know can import from the US. But postage is too expensive. I live in Ozzy Land Take Care...
great video, you guys ain't f**kin' around! I wonder if you could run a hydraulic oil pipe line to some kind of ram to help move boulders under water (like tractor loader hydraulics)
man , i'd love to get in on some of this action, been looking for a claim for awhile but it seems all the good ones were taken a long time ago, only one i've looked at so far is a black sands beach claim, i'd rather be diving/dredging than just digging up the beach around Charleston
Yeah most of all the good spots will have a claim on them, what gear do you have? Haven't done any beach mining, but would like to have a look at that one day..
+Ray Rusaw nice, you going to use it on your dredge? Been trying to sort out what mats we are going to use on our new 8" we are going to build, but I think mike and doc are hiding from me..... Or they are busy on there new flash web site...
Doc has been super busy with the new mats and the web site plus a ton of people have been calling with conercial operations wanting to redoe the sluices
@@12madcow Yeah, sucks to come up and a bear is pawing the riffles. Just go back down and hope you don't run out of gas. Some dredges have rifle racks just for that reason.
@@12madcow that's kool bro . I'm just down inverz way keen to start up something just never done anything remotely close to dredging or mining so was wounding if you guys had some time to catch up have a chat about it .
Развлечения
Another good vid! Thanks for taking the time to make them 👍🏻. I am getting in my creek tomorrow with the 4" and my new heater.
you definitely need a flap on your nozzle, to break suction at the intake point in case you get detained by it. a guy who dredged for my dad, managed to get both hands/arms up past the elbows into the nozzle of an 8"(necked down to 7") running @ full throttle. it then was going to pull the regulator out of his mouth followed by his lungs. the diver was upside down being jammed up against the rib of the hole being worked by the strong current and was in a very serious life or death situation. I being the last one in came to find this happening and pounced for the flap on the nozzle and broke suction just as it took his regulator. and come to find out that the sharp edges of steel inside the nozzle (newly built custom 8") that deeply lacerated his arms through his wetsuit and was drawing the blood out of his system, quickly pulled free from the nozzles tremendous suction power.
oh, he lived and was incredibly beaten up by the 8" dredge nozzle (necked down to 7")when I saw him next half his face was purple and bruised, he broke several teeth from biting the regulators mouth piece keeping it from being sucked in, 20+ stitches for the lacerations and horrifically wounded pride. without that flap he would be dead
Wouldn't have been easier to shut the motor down. We always dive with 2 people, and the guy running the dredge at the time would just turn the power down..
@@12madcow was 2 divers and had throttle control on the nozzle too. the orientation of the nozzle was such that access to it was impossible with dude sucked into the end and the flap was closer than the shut-off. couldn't see anything was wrong because the water was "smoked out" until I got to him and then took a second to actually figure out what was going on, at 1st i thought he was playing around, cuz i had no idea this was even possible. my dad gave a quick tutorial to the crew and we were off and running kinda atmosphere
Dangerous endeavor for sure; takes brave men only. Maybe even the desperate.
Just have to say I love the San Francisco 49ers hat you have
It's not a fish but a GATOR, LOL
Doing the hard yards there boys Just watch both end to end !! those bloody spiders love you I recon mate they keep trying to jump on you !! ha ha !! hope you got some good colour there looked like a awesome spot !! Good luck on the next spot hey ! Cheers bru !! :)
What a great team.Team........Together Each Achieves More
That dredge is a monster 👍🏻
Yeah, getting up there for a 8... Out of the 2, the old one is wee bit bigger, but doesn't do aswell when driving upstream
@@12madcow you have good velocity at the nozzle , your pump is well sized for the hose , alot of guys F** that up by going to a hose thats too big and losing suction.
are you using proline or keene pumps and what size ?
Love seeing your videos
Cheers Patrick..
Wished we could dredge up here in Canada
Chingon video .voy a sacar oro igual que ustedes buena leccion de extraccion de oro aluvial.chingon el team.saludos drsde Mexico.
hahaha really cool video love it nugget nelly is awesome :)
how hard is it to get permits and claims. They killed our suction dredging here in Oregon....
Lovely Gold Gents! Where did you get that spiral from please? I know can import from the US. But postage is too expensive. I live in Ozzy Land Take Care...
It's just a keene gold wheel.. From nz
is that a 6 or 8" dredge mate
can i get to do this? holiday, can dive and I absolutely love doing this
THUMBS UP ENJOYED THE VIDEO
nice work good vid
Do you plan to get back to it next season? 🙏💜🙏💜🙏💜🙏💜
Hi, yep just sorting out the boxes at the moment.. Hope it's not going to flood this year..
Here’s an idea: take that stupid goddamn flat bill hat off! Sweet dredge, tho.
great video, you guys ain't f**kin' around! I wonder if you could run a hydraulic oil pipe line to some kind of ram to help move boulders under water (like tractor loader hydraulics)
subbed lads , keep it up ✌
Slick operation guys.
What state are you win
where can i get the machine separating the gold from the black sand?
Just make it... sluice box, water pump, magnets, plastic roller, and a motor to drive it..
where in nz can i go prospecting and run a slicebox?
If you google it you will find few free areas you can go.. Around Arrowtown is one.. this is as long as your not running a pump.
hey.... ya got a good wetsuit.. water will be about 5deg at the mo.. lol
man , i'd love to get in on some of this action, been looking for a claim for awhile but it seems all the good ones were taken a long time ago, only one i've looked at so far is a black sands beach claim, i'd rather be diving/dredging than just digging up the beach around Charleston
Yeah most of all the good spots will have a claim on them, what gear do you have? Haven't done any beach mining, but would like to have a look at that one day..
What happened to the Naughty Dude did he go find a city job on you guys ? Nice Gold
Hey ray.. Yeah we had 4.5mths off due to bad weather, so he had to find a normal job.. Have ya seen gold hogs new mat??
yep Hopefully if it ever warms up here in Alaska Im going to be one of the first to tryt it out
+Ray Rusaw nice, you going to use it on your dredge? Been trying to sort out what mats we are going to use on our new 8" we are going to build, but I think mike and doc are hiding from me..... Or they are busy on there new flash web site...
Doc has been super busy with the new mats and the web site plus a ton of people have been calling with conercial operations wanting to redoe the sluices
is that dual pumps and what size 6 inch
single.. 8"
so jealous .....so very jealous...
5:57 illuminati confirmed.
Roxborough
Nice
living the dream
Americans look they have more freedom under the queen 👑 than we do 😂
I'll trade places with you...come to Alaska and you can use my 6" dredge. I'm ready to split from here for awhile.
Hey J Mccain, and nothing wants to eat ya over here..
@@12madcow
Yeah, sucks to come up and a bear is pawing the riffles. Just go back down and hope you don't run out of gas. Some dredges have rifle racks just for that reason.
hey bro you guys still dredging ?
Just going to be doing it summer..
@@12madcow that's kool bro . I'm just down inverz way keen to start up something just never done anything remotely close to dredging or mining so was wounding if you guys had some time to catch up have a chat about it .
@@lainecooper8256 no worries, just send me a email if ya have any question..
@@12madcow yeah sweet bro what's your email?
@@lainecooper8256 oh sorry, goldfevernz Facebook page..
excusez moi de m excusé ,bien du courage
This video could of been 10 minutes long.
3
www
Hey man go back go back that big rock you guys could barely move that rock was full of gold bro that's why you couldn't move it
Hey Eddie, if a winch doesn't move it we wouldn't go out of our way to hurt one of us, as we aren't near a hospital...