Hello, Question. Should i use the T Motor AIO used in this video or the original GEPRC GEP-F722-45A AIO V2? I think GEPRC AIO comes pre tuned? is it better than T motor AIO? what would you recommend?
Nice build! It’s been a good minute since I have built a FPV quad from ground up. The feeling of flying something you built is so rewarding and satisfying!
Great video. I have been dealing with an unfortunate issue that I believe I put myself into if anyone can help. I’m new to FPV and tried to edit the port tab, but when I pushed save and reboot, my whole list of UART’s reset and now I’m not sure which was selected and how. Any help on where I could find out how the quad comes preselected before I messed it up? Any help would be greatly appreciated.
Hello. Extremely sorry for the late response. This can happen if you enable the UART and select any peripheral at the same time. I hope you have figured this out by this time. If you still need any assistance, You can get in touch with us on Whatsapp (+918281205193), or mail (Support@quadkart.in) We will help you out as much as we can. Thank you
Yes, It was shot using Gopro 9, A small portion of the clip is from O3 itself. They are stock settings shot on 4K, 60FPS, ISO, Shutter etc all Auto. No ND filter used. Thank you
Hi guys. I finally finished thus drone build. I updatet to BF 4.5 and when i try to launch the drone its flips to one side. Checked Dshot Bi Dishot and motor and prob direction. Any idea? Somebody on reddit said, its the esc temp limit?
Thanks for the response. How do you mount the props? I have them with the label upside to the Sky. Did you change the aio orientation in BF? Maybe that is my problem?
I would love to know how to build a Cinelog 35, because I built one and it flies like jello crap. A good tune and maybe solid camera mounts would do it wonders.
Hello It is Gemfan D90. We found better throttle control and less noise on 5 blade. But we will recommend you to try both and see which one works best for you. Thank you.
It is better than Avata for some factors like ease of repair in case of crash etc. But avata is also than this for several factors including longer flight time. Both has its own advantages and disadvantages. You have to check what suits you the best. Thank you.
Guys I couldn't figure out how to set board orientation, finally I did and it's all ok. But during the process I managed to switch OSD off. Have only DJI regular stuff but nothing from beta flight. Could someone send me a BF settings nplease for this drone, I believe I messed up with UART
Hello, Sorry for the late response. If you still need any assistance, You can get in touch with us on Whatsapp (+918281205193), or mail (Support@quadkart.in) We will help you out as much as we can. Thank you
Thank you. We wish if GEPRC had provided the GPS TPU Mount with the frame. We only had the yellow TPU here, so completed the build with it. Need to order other colors :)
There are 2 set of M2 stand off given with the frame. One is very shorter that is used on the front side of the frame, to connect with duct. Second set is inserted inside the ducts as shown in the video. Thank you
Amazing guys. as usual first commenter here. do more stuffs...Im a happy customer of you.
Thank you
Hello, Question. Should i use the T Motor AIO used in this video or the original GEPRC GEP-F722-45A AIO V2?
I think GEPRC AIO comes pre tuned? is it better than T motor AIO?
what would you recommend?
Hello. Both are okay. Geprc AIO doesnt come pre tuned, But you can load their CLI. We haven't found much difference in flying.
@@quadkart Ok but what is CLI?
Nice build! It’s been a good minute since I have built a FPV quad from ground up. The feeling of flying something you built is so rewarding and satisfying!
Yes, So satisfying. 100% Agreed!
Hello, question. Can i use CHNL BLACK 1500mAh 6S 100C 22.2V CNHL LiPo instead of 1300mah battery?
Yes, You can use. It will be slightly heavier. But it should be okay.
@@quadkart thank you ☺️
Beautiful build, beautiful country. Thanks for sharing both!
Thank you
Great video. I have been dealing with an unfortunate issue that I believe I put myself into if anyone can help. I’m new to FPV and tried to edit the port tab, but when I pushed save and reboot, my whole list of UART’s reset and now I’m not sure which was selected and how. Any help on where I could find out how the quad comes preselected before I messed it up? Any help would be greatly appreciated.
Hello. Extremely sorry for the late response. This can happen if you enable the UART and select any peripheral at the same time. I hope you have figured this out by this time. If you still need any assistance, You can get in touch with us on Whatsapp (+918281205193), or mail (Support@quadkart.in) We will help you out as much as we can.
Thank you
Great stuff guys. Thanks
Thank you. It mean alot to us :)
excuse me, can I build this with an analog cam and vix setup , with same other specs ?
Yes, You can build Analog of this same version. You can go for a vTX with 20x20 mounting pattern and a Micro Camera (19x19mm).
I assume the footage was from the go pro..care to share settings? nice video.
Yes, It was shot using Gopro 9, A small portion of the clip is from O3 itself. They are stock settings shot on 4K, 60FPS, ISO, Shutter etc all Auto. No ND filter used. Thank you
Nice video! thanks for sharing!!
Thank you.
superb❤🩹i almost build my cinewhoop with help of your last video. thank you for the detail video🙏
Thank you
Hi guys. I finally finished thus drone build. I updatet to BF 4.5 and when i try to launch the drone its flips to one side. Checked Dshot Bi Dishot and motor and prob direction. Any idea? Somebody on reddit said, its the esc temp limit?
This mostly happens due to wrong propeller, Wrong motor direction, Wrong AIO orientation etc. Let us know if you need help to figure this out.
Thanks for the response. How do you mount the props? I have them with the label upside to the Sky.
Did you change the aio orientation in BF? Maybe that is my problem?
I would love to know how to build a Cinelog 35, because I built one and it flies like jello crap. A good tune and maybe solid camera mounts would do it wonders.
It is all stock settings here. Never had any issues and flies smooth. Maybe you can share more info on the build and we can try to fix it? Thank you
3d printed parts are aslo included in the frame kit single purchase ?
GPS Mount is not included with the Frame Kit. We printed it here. Rest all 3D Printed parts comes with frame.
@@quadkart how can i order the gps mount ?
superb video...
Thanks alot
hi. This is a good guide. I was wondering if you could share the CLI?
Hi, We are using the stock Betaflight tune and settings.
Does the dji remote come with drone
This is a custom built drone. The cost breakup at the end of the video includes controller in it.
Which 5-blade propeller did you use? The link isn’t working.
And which one is better 3 blade propeller or 5 blade propeller for indoor shots?
Hello
It is Gemfan D90. We found better throttle control and less noise on 5 blade. But we will recommend you to try both and see which one works best for you. Thank you.
liked the video, one suggestion - add voiceovers. & Texts, so beginners can understand easily
Beautiful place.
Welcome to kerala😅
Thank you.
Is this better than the Avata 2?
It is better than Avata for some factors like ease of repair in case of crash etc. But avata is also than this for several factors including longer flight time. Both has its own advantages and disadvantages. You have to check what suits you the best. Thank you.
Guys I couldn't figure out how to set board orientation, finally I did and it's all ok. But during the process I managed to switch OSD off. Have only DJI regular stuff but nothing from beta flight. Could someone send me a BF settings nplease for this drone, I believe I messed up with UART
Hello, Sorry for the late response. If you still need any assistance, You can get in touch with us on Whatsapp (+918281205193), or mail (Support@quadkart.in) We will help you out as much as we can. Thank you
👏excellent bro ,Can I made this drone with elrs 16s remote?
If yes then what is the process?
Hello
Yes, You can add a ELRS receiver and bind it with TX16S.
battery back up time sir plz
Battery back up is around 5 minutes sir
What is the length of the antenna for the VTX?
Hello
It is the stock antenna that comes with DJI O3 Air unit. Thank you
amazing video
Thank you
Very nice and satisfying build. Would prefer the GPS TPU Mount to be black instead of yellow though ;)
Thank you. We wish if GEPRC had provided the GPS TPU Mount with the frame. We only had the yellow TPU here, so completed the build with it. Need to order other colors :)
Gopro plate is mounted in the wrong orientation.
Yes. We noticed it after almost completing the build. If you check the time stamp 49:00, You can see we are putting it back correctly. Thank you
add some coupons also ..Thanks 😆
😄
Analog or digital?
m2x4x11.5 standoffs don't look like this. mine are shorter, 11.5mm in length. yours are like 25mm or so ...
There are 2 set of M2 stand off given with the frame. One is very shorter that is used on the front side of the frame, to connect with duct. Second set is inserted inside the ducts as shown in the video. Thank you
Tbs source one v5 build video please with build cost
Sure, On it!
hey guys i am wondering if you can send me some parts plz so i can also start my fpv journey please
i am a big fan
can you tell me if this drone is good for indoors in a building were i can goto diff levels will it transmit through walls the signal
Hello
It can be used for Indoor shooting. But you will have to plan it if you are going in to differnt levels in a building. Thank you
I wish my video came out that smooth LOL
Thank you. What setup are you flying?
@@quadkart same as yours GepRC Cinelog35 v2 O3 stick
Nice build
Thank you
Nice build❤
Thank you
make more videos bro
and use nd filter next time.
Thank you. We have few videos coming up. With ND Filter :)
It's showing Out of stock on your website, can you please help me to get this and spare propeller guards too of this for future, in Kolkata? Please?
Can you message us on Whatsap (8281205193) ? We will put together a build for you. Thanks
Can you change the angle of o3 camera before flight?
Yes, It is adjustable.
@@quadkart thank you
Nice!
Thank you
What is maximum flight time with GoPro
Hello
We got a maximum of 6 minutes with Gopro using 1300Mah 6S Battery.
Where is rx reciver?
We are not using any other receiver. Only DJI FPV Controller which can be binded with O3 Air unit. Thank you
Thank you, the instructions on this V2 frame are terrible!
🔥😊
Thank you
how to charge battery
i want to buy price?
Hello,
Please get in touch with us on Whatsapp (+918281205193)
😍🔥
Thank you
how much did it cost to make
Hello
It cost around 1.3L. Thank you
Your Radio Controller link is wrong
Updated all the wrong product links in the description. Thank you
the piece TOP PLATE was inverted
Yes. We noticed it after almost completing the build. If you check the time stamp 49:00, You can see we are putting it back correctly. Thank you
@@quadkart THANK YOU FOR THE VIDEO IT HELPED ME A LOT IN REPLACING PARTS