HOW TO MAKE PENCIL / DRIFTING WEIGHT MOLD FROM SCRAP !!!!!!!
HTML-код
- Опубликовано: 13 сен 2024
- This is how I make my Drift / Pencil weight molds. The first 12 min is just getting the aluminum for the mold ready. It was cut from scrap I had. From that point On is actually making the mold. It takes 30 to a hour to make them. These can be used as filler for rubber hose or anything else you make drift weights from. I just use them the way they are for drifting and anchoring.
Thanks for taking the time to show how to make a mold! Teach a man how to make a mold and he will fish for a lifetime!
Very nice! I need to build a mold like that! Thanks for a very good video!
Thank you. I appreciate you watching and commenting
That would be a good idea for making a plastic worm mold. Thank you for making the video.
Thank you for watching and commenting I appreciate it
Great video Jeff. After watching this I believe I made my last batch of slinky weights last week.
Yes sir that’s why I started making them. It killed my fingers and it was slow. I can pour a couple hundred quick.
Good job 👍👍
Another great DIY informational video . Thanks for sharing this with us. Jeff you and Keith are teaching us how to do all kind of things. Saving $$$$🇺🇸
Awesome awesome how to video buddy!! I think I might have to try and make my own molds now!! I just got to get my big floor drill press back from my buddys place!! I didn’t have a garage to keep all my stuff in so he has let me keep a few big items in is shop!! But now I have got my 60’x80’x16’ pole barn up and just got the concrete in so now I’m definitely ready to get my shop all set up for sure!!
That’s awesome congrats on the shop. I appreciate you watching and commenting thank you
Great video it might take a little effort but it beats paying $50 for a mold
Great video. Been considering making a mold for pouring weights verses buying one. This has given me a good insight into how to do it. Thanks for sharing.
Thank you. For watching and commenting.
Good video, ordering materials now
Awesome thanks for watching and commenting
Wonderful video Mr.jeff
Thank you sir. I appreciate you watching and commenting.
Again Jeff thanks for your time and knowledge.
Thank you for taking time to watch and comment. That makes it worth it.
You could make a mold from wood , two pieces, drill a desired hole
Thanks Jeff, great video!!!
ive been brain storming and searching idea and i think this style will make planning alot easier
Awesome good luck. I appreciate you watching and commenting thank you
@@bowl830 anytime always appreciate a good idea
Nice job man! Thanks!!
Thank you very much sir
Great video Jeff, cant beat a good DIY video, keep them coming
Thanks brother
awsum video, thanks
Great how to Jeff I pour my own I like the mold you made I will have to make me some thanks for sharing brother
Thanks. I know it was too long but I learned the hard way years ago when I started making them lol. I wanted to save people the aggravation haha.
It was not to long very interesting keep your attention great job need more
Great video on DIY on how to make your own fishing weights there now it's something I'll have to check in own making my own here I'd say around here a person could sell them to people too cause they are always looking for someone who can make them too have a great day now and I'll ttyl now thanks for this learning video too
Cool. Great information and great video
Thank you sir
Fabuloso!
Ando à procura deste tipo de moldes em Portugal para fazer os lápis com os meus alunos!
Good dude! And thanks for the video!
New sub here. I have been wanting to learn about this kind of stuff
Thank you. That’s what I love to hear. Thanks for watching and commenting
1:00 "pretty simple", no, more like pretty AWESOME!
Thank you sir. I appreciate you watching and commenting
Thanks for taking the time to teach
New sub here, man that was an awesome video! I never realized that you could cut aluminum that way, thank you so much for sharing that with us.
Thank you for watching and commenting I appreciate you subbing my channel. Trying to build a channel to help and educate and sometimes catch a fish lol. Share with your friends. Glad you got something from it.
Awesome video Jeff. Definitely need to make me some of these
Just do it!!!! Thanks for watching
Nice
good jobbbbb tks
That's awesome! I have been trying to make a no-roll mold out of aluminum using basic hand tools. No luck yet. Got the 2x4 mold down though
Brother my first couple I made years ago. I used just a hand drill. That’s why I do the washer spacer. It makes it simple.
What size drill did you use for the last drill to make the 2 oz. and 4 oz. hole?
I assume the length of the holes is about 3 3/4" long, correct?
Thanks for the tutorial buddy...I’ve been threatening to pour my own nail weights for awhile now :-)
Awesome glad I could help. It’s easier than I made it look. I over complicated it s little lol. Good luck.
Motorcycle helmet with visor, leather gloves, heavy coveralls, heavy jacket, boots.....or you may dance with the silver devil.
Lol. Been there.
@@bowl830 I've been lucky so far..
Beautiful bro
Awesome Jeff.
Thank you sir. Appreciate it.
WHEN THE MUSIC STARTED,DURING THE POUR,WHO ELSE WAS EXPECTING GREGG ALLMAN OR DICKEY BETTS??
Lol. Thanks for watching and commenting I appreciate it
Nice how to on molds!
Thanks for watching. I listened to your show while I was editing it lol. Great job as always
@@bowl830 Thats awesome
thanks
Or you can pour some lead into a cold channel iron. Just pour it in and let it run down, solidifies immediately, drop it out and do the next one.
Enjoy watching creative men do craftwork, but you can buy bulk lead spools in 1/4 or 3/8" diameters and just cut them to whatever length you want and use pliers to flatten and a hole maker to complete it. I expect the cost of the lead coil spools will be insignificantly more than the bulk lead you use to make these molded ones.
Lead spools are 5-8 dollars per pound. Around here I get soft pure lead for about .40 a pound. And it’s just fun making stuff lol. It’s about the challenge for me. Thanks for watching and commenting I appreciate it.
Thank you for shows us how to make them. How many pours can you get out of one of those it gets to hot to handle?
Actually if you weld the nuts in a piece of pipe. I can pour hundred. I usually wear welding gloves for protection when using melted lead anyway.
Awsome 👍👍what blade are you useing on the table saw
It’s just a standard fine touch carbide blade.
Thats kool jeff
number 30 drill bit metric
Question: could you use a piano hinge to keep the plate aligned and a spring clamp to hold together while pouring?
The one I use I actually have spring pins in one side one on each end. I should have shown that. I drilled the hole for the spring pin through both sides. Installed pins in one side then over sized the other so it would slide on and off easy. then I use a spring clamp to hold together. Thanks for watching and commenting I appreciate it
10:20 Lol
What would you charge to make me a mold
Yeah because everybody has a sick huge piece of 1/2” tick aluminum laying around
go buy it then , how hard can that be
How would one make a mold for pencil style bottom bouncers with the wire through it
I’d just drill all the way through on first pass with a bit the size of the wire you want to use. Then do the rest just like in video. Thanks for watching and commenting I appreciate it
Old-timer I love your video Maybe some of these RUclips idiots lessons from you how to make a video
Who you calling old😂. Thank you I appreciate you watching and taking time to comment. It makes it worth doing for me.
Have you ever thought about selling these? I would be interested in a couple.
I wish I had time to make them. I appreciate you watching and commenting
This part needs to be absolutely perfect...as the whole is completely crooked
😂
Wow what kinda smelter do you have
I got a few of the Lee pots
I like the way your pot drips from the bottom. I have a hot pot and have to pick it up and pour it.
That one is about worn out. Usually the stream is a lot bigger coming out the bottom. That one is a lee 10 lb. I have a Lee that holds 20 also. They’re worth the money. You can add lead as you use it up. Thanks for watching and taking time to comment.
Do you sell these molds, if so how much?
No sir. I appreciate you watching and commenting thank you
@@bowl830 oh well, great video!
Lol. Uses a table saw to cut a pilot hole so that way when he drills it’ll be “tried and true”. Then uses a hand drill to drill final hole! YOU DO REALIZE NO MATTER HOW HARD YOU TRY YOU ARE NOT GOING TO DRILL STRAIGHT DOWN BY HAND. THIS IS WHAT DRILL PRESSES ARE FOR. EVEN THEN IT COULD VEER OFF. YOU ARE BETTER OFF DRILLING WITH A SHORT BIT TWICE. ONE ON EACH END.
Yep.
Usually the table saw slot works perfectly. But trying to do it looking through a cameras lens kind of screwed me up lol. Yes I use a drill press when I make them. But not everyone has one.
I appreciate you watching and commenting I like getting feed back good or bad. I hope you choose to watch other videos I’ve made. thanks.
hello, do you sell?
No sir. I do appreciate you watching and commenting
@@bowl830 ok thanks
Make me one I’ll pay you
alright, then can i have some?
Lol. How many you want?
10 please!
Can you make me one I’ll pat you
Sorry I can’t. My real job keeps me slammed right now. Thanks for watching and commenting I appreciate it