DIY Routed MDF 2 Way Bookshelf Speakers

Finally had the time to upload the long overdue DIY project. The "DIY MDF Table Saw" was put into action cutting 3/4" MDF board. Another DIY tool that was put into action was the D"IY Palm Router Circle Cutting Jig for Cutting Small Holes".
Components in this project:
6.5" Magnum by Electone Philippines 8 Ohm 80w Hi-fi Woofers
3" Kevler Professional GT-100 8 Ohm 100w Tweeters
Crown CN-2500 600w 2 way Crossover/Dividing Network
6" x 2" plastic port tubes
Speaker terminals
Palm router really did a very good job in cutting the holes no sweat. Wouldn't do any projects cutting holes without it. Edge rounding was also a breeze using the DCA palm router.
Sheet sander also did helped a lot in sanding from grit 80, 120, and 240 sandpapers.
The First plan was to paint the enclosures using an automotive paint but would require enormous amount of lacquer thinner to thin the sticky, volatile automotive lacquer paint. So I ended up purchasing a liter of premium acrylic latex paint for home use. It was a quick job painting latex with a foam roller. Had so much fun painting.
Church the French Bulldog and Wiki the Belgian Malinois-Pitbull mix also really did a lot of helping too, really. Amazing. ^_^

[@electronicshelpcare]

Thanks.nice box.

[@chrclmnky]

Thanks very much! Damn, I can't believe high calibre electronics channels would visit my videos!

[@বড়াল_পোলট্রি_ফার্ম]

@@chrclmnky yes he does. I have seen him several times in the comments section of many other channels. 😅😅. He is nice. 😊

[@thowfiqrt6846]

Bro it is studio monitor speaker???

[@timschutte8310]

, you should have put some self stick insulation on the interior walls of the speaker box to prevent box reverberations and to help keep the bass from being to muddy.

[@chrclmnky]

I think there's no need since the enclosure is made of dense MDF. Acoustic lining is needed on plywood boxes because plywood are "springy" than MDF.

[@chrclmnky]

Thank your for watching and feedback, Tim. I appreciate it much.

[@pabloosvaldopenizzotto1098]

Nice DIY project. You should be proud of your work. Congratulations!! I have only just one question. Why you did not add some damping material inside?

[@chrclmnky]

Hi Pablo, thank you for the positive feedback.
I didn't put any dampening material because the MDF is dense enough to hold any reverberations.

[@pabloosvaldopenizzotto1098]

CHRCLMNKY as far as I understand the purpose of dampening material is to kill as much as possible stationary waves inside the enclosure, that finally will get out through the port as distorted sound. Anyway is a matter of taste. If you are happy with the way it sounds, this is the most important thing.

[@chrisvinicombe9947]

I was wondering the same thing. Self adhesive closed cell foam is very good. I find it improves the bass tone and stereo imaging quite a bit , cheap too 😄
Like all your DIY tools and enjoyed the video. The speakers turned out nice 👍

[@chrclmnky]

@@chrisvinicombe9947 Thanks. 😊☺😆

[@chrclmnky]

@@pabloosvaldopenizzotto1098 Sorry typo, "MDF is dense enough to kill any reverberations." 😂😁

[@michaelvincent8306]

Nice to see someone make something without 10 grands worth of woodwork kit great job from a person from the real world

[@chrclmnky]

@@michaelvincent8306 thanks. 😎👍

[@clearme2]

I had the same harbor freight router ! It lasted me 10 years before it finally took a shit. Used it few times a month for its entire life. Your build came out nice as hell👍🏻

[@mspolas9964]

Racoon Tunes on

[@SkullRabbit]

Very nice

[@chrclmnky]

Thanks for the comment, Skull Rabbit 😉 😊

[@swagon4545]

Very nice.. 👍

[@chrclmnky]

Thanks mate.

[@chrclmnky]

Box size is 10" x 8.5" x 13" outside dimensions. 😊☺😉

[@rodrigojorquera4308]

Buen trabajo.buen video

[@chrclmnky]

Thank you Rodrigo.

[@thanhat1462]

length is how many centimeters, and width is how many centimete

[@thanhat1462]

What is the size of the bass speakers?

[@chrclmnky]

Hello Thanh, woofer is 6.5"

[@wospestud]

Nice video🥰
I am also a wooden speaker maker, watching the speaker DIY process is a kind of enjoyment.

[@chrclmnky]

Thanks 🥳

[@KLSMOOTH77]

Bro your video are awesome
And build are extreme powerful

[@chrclmnky]

thnkx kl smooth

[@AmazingRoony]

Respect ,,. !!! Great !

[@chrclmnky]

Thank you Jean Paul. 😊

[@djtapan8178]

Bhai box price Kate

[@MUSIC_MG794]

I Want This

[@lawrencemaithyamutie4013]

these are the best speakers you ever made.... keep it up bro👍

[@chrclmnky]

Thank you Lawrence, doing these project regularly will enhance carpentry skills and stuff. They are fun too.

[@lawrencemaithyamutie4013]

@@chrclmnky yeah coz that were some pure skills

[@maryjane-hc6jt]

Who says you need the best, most expensive tools to make it right!? This guy made some cool ass boxes with homemade tools!

[@chrclmnky]

Thanks Joe

[@shekharnirmalkar6302]

Very good.bass banato baja kar bhi dekha dete.

[@chrclmnky]

Thanks Shekhar

[@angorets77]

А показать как играют!? Это же преступление!!!

[@Holztuben]

No soundtest No Like

[@chrclmnky]

Hi Holzstube Woodworker, will upload a test video soon, please subscribe to get new updates. Thanks! 😊

[@alfredogomez9762]

Yes jaja

[@pobrengtribu5682]

Sir asa ka naka palit anang magnum? Salamat sir.

[@BindusarNinoria]

Please send specification for DIY work

[@arfathkhalid1099]

Thank you so much for showing router bits used to make those circles 👌👌👌

[@chrclmnky]

👍

[@uttaramukhi5015]

I love these idea of making the speakers

[@chrclmnky]

Thanks for the feedback, Uttara.

[@uttaramukhi5015]

Actually i want to make this speaker and tell me all the recommend product for make the speaker

[@larsgenrich1464]

5:49 - cut your thumbnail.

[@sherrylkeith6549]

woodprix is full of awesome tips. Very helpful to me. Thanks

[@chrclmnky]

Go home Sherryl, you're drunk.

[@Phantom.3296]

No sound test=blue balls

[@chrclmnky]

Hello Nithin, will upload a test video soon. Be sure to subscribe. Thanks!

[@prkashshil456]

Excellent custom design. These hands have magic.

[@chrclmnky]

Thanks very much Prakash.

[@openbafflespeakerbuilder9863]

Very cool build, thanks for sharing!

[@chrclmnky]

Thank you.

[@zidanez2011]

using the hexagonal screw type could make your work have a luxurious impression... trust me 🤩

[@chrclmnky]

Allen head bolts?

[@zidanez2011]

@@chrclmnky 6:54 yes 😀
Awesome pieces... good job, man 👍

[@EYEONEVENTS]

You deserve more than 3 million views coz ur work is very clean professional and presice

[@chrclmnky]

Thank you for such a nice feedback.

[@spicyxiumei7621]

sabi na nga ba pinoy to !
nice work !!

[@chrclmnky]

Thank you Spicy! Cheers from Butuan City. :)

[@UltimateBNA]

Your work so clean 😍

[@chrclmnky]

thanks

[@sunsys0]

Excellent clean and neat work, great video 👍

[@chrclmnky]

Thanks. 🥳😅🧨

[@yttean98]

Nowadays owning a near field 2way speakers, it is cheaper to buy than to build them yourself, the current crop of commercial 2 way near field speakers are very good with in-built amps thrown in free. Then you will say it is fun to build yourself.

[@chrclmnky]

Hit Like and Subscribe. Thanks.

[@pix_by_joshua]

Great speaker build. Thanks for the great video.

[@chrclmnky]

Yes sir.

[@yelmer6940]

Grabe pud ug POWER TOOLS bah! Okay kaayo! Nice Bro!

[@chrclmnky]

Thanks sir

[@jonathanwong880]

Absolutely Gorgeous!

[@chrclmnky]

Thanks 🍾🌚🌙

[@mr.elturo1252]

woooow.....ganda ng pagka, gawa malinis na malinis👍👌👌

[@chrclmnky]

😎😍🎱🛠

[@mr.elturo1252]

sir magkano kaya budget sa ganyang DIY BOOKSHELF SPEAKER??😉

[@chrclmnky]

@@mr.elturo1252 a few dollars

[@elisiocliopt]

Good work and fun. Missing glass wool or sponge for reflex sound sounds better. congratulations.

[@chrclmnky]

Thanks Elisio

[@a0r0a7]

Very nice build. Look great and I would guess sound really nice 👍

[@chrclmnky]

Thanks Andy. The speakers can be heard in this video ruclips.net/video/7RtoeZlkGjA/видео.html

[@onkarsharma1639]

Art unforgettable 🙏🥰❤️

[@orvilleblack3774]

Awesome....I'm loving this....if you don't mind sharing your measurements....thanks

[@pcorf]

Philippines yay! I traveled there in November last year. Nicely made speakers.

[@chrclmnky]

Thanks Pcorf.

[@toto073081]

Nice. pulido ang pagkagawa

[@chrclmnky]

thanks

[@LS.11]

I would take it to the professional painter for painting. Well done.

[@chrclmnky]

Yes next time I would to.

[@mariodiaz3868]

WE need to see it in action your work is very good

[@parkerglenn4484]

Everyone in the comments is so needy. Good video & nice speakers!

[@chrclmnky]

😃 thanks

[@electronicshelpcare]

Great making

[@gals4793]

I admire your job, 🖐

[@chrclmnky]

Thanks very much, Gael. 😎🥰🔥

[@hi-fihaven2257]

Nice work on the video! Great speaker project!

[@chrclmnky]

Thank you Hi-Fi Haven. 😄😊

[@Nospeakyenglish]

Not bad. You should have sound proofed the inside of the box and added foam under the speaker mounting point. Could have also added a bagel behind the mid drivers. These are just things that can take your setup to the next level

[@chrclmnky]

That was a very good feedback. Thanks, Chris.

[@akshatgupta2897]

Awesome and thanks for your help

[@chrclmnky]

You are awesome Akshat. 😀😊

[@akshatgupta2897]

@@chrclmnky☺️☺️☺️☺️☺️☺️

[@timschutte6924]

You do nice work.
I've seen your other videos and particularly like the JBL subwoofer build

[@chrclmnky]

Thanks Tim.

[@MariusVideoOfficial]

Very nice work!

[@chrclmnky]

Thank you Marius. Appreciate the feedback. :)

[@a0r0a7]

Quite excellent. Lovely build 👍

[@chrclmnky]

Thanks Andy

[@KyoHeiSuminoe]

Grabe tol pag pinoy talaga gumawa ng speaker box iba klase

[@akash1702]

your pet is so cute 😘

[@gordiefrench5342]

very very nice work with money saving
shows anybody can do it
thank you

[@chrclmnky]

Hello Gordie, thank you for such a nice feedback. Have a nice day.

[@a7am_music]

Bro you are great, thank you❤

[@chrclmnky]

Hello Azam, thank you brother, I appreciate the feedback.

[@john.cbyron6702]

Amazing keep up the good work thanks for your videos

[@chrclmnky]

Thank you John for such nice feedback.

[@ryklorenzo3070]

Wow sir bakit ngayon ko lamg nakita blog mo, super informative at 10/10 ang video editing galing

[@chrclmnky]

Thanks sir

[@renatocarillo3478]

Magnum ba yun woofer at kevler yun tweter?

[@chrclmnky]

@@renatocarillo3478 yes

[@sunilkumarverma6856]

Beautiful product

[@chrclmnky]

Thank you Sunil.

[@sunilkumarverma6856]

Price kitna hai

[@tuelho99]

Nice Work bro👏

[@mixytv3258]

Clean 🤩should make a sound test

[@ninoemmanuelleuy4906]

Grabeng kalat pag walang naka abang na vacuum cleaner. Hehe. Nice work na naman papi!

[@chrclmnky]

Yes sir, vacuum na yata pinaka useful na power tool dito. Kahit anong gawin kekelanganin pa rin ang vacuum cleaner.

[@kodithebear]

So inspiring! Great job!

[@chrclmnky]

Thanks Paul

[@jeffwhite8017]

Some people are just bad ass lol. Those look like JBL made them lol. Nice work man!

[@chrclmnky]

Thanks, Jeff. 😎

[@mukeshjohri2379]

Very good nice job

[@mehtabhussain8179]

your work is so amaizing bro

[@austinernst7944]

Beautiful!

[@chrclmnky]

Thanks 🌞😎

[@singhhomeland]

Best high quality brilliant work 🙏

[@chrclmnky]

Thanks

[@HarshSingh-qr5co]

Superb work

[@onimaruluis]

Oh ! Excellent sound !

[@gonzavilla4130]

Excelente!!👏👏 Solo falto la prueba de sonido 👌

[@chrclmnky]

Thank you Gonza.

[@yorusuyasoul69420]

Kana nindot pang desktop lami kayu hehe

[@chrclmnky]

O pwede kaayo sir. Any class D amp will power these bookshelf speakers good. Paresan dayon ug powered subwoofer in a 5.1 setup.

[@marionojavamuth5376]

Nice....but ending Very Nice for Tes This speaker 😁👍👍

[@CraigLafferty]

Love the dogs! Love the ink! Keep on keeping on!

[@chrclmnky]

Thanks Craig.

[@ErCanEverything]

Well done my Friend🙂🤝🤝🤝

[@chrclmnky]

Thanks

[@kennethjudequimada1706]

Ang gnda ng build nyo boss 👌👌👌

[@chrclmnky]

Many thanks! 😎

[@akshithaelectronics5008]

Excellent work

[@sivakumarmadala7271]

Iam for India your video are good bro ❤️❤️❤️❤️

[@chrclmnky]

Thank you brother Siva.

[@TarynMilnes1]

Those look great

[@damiancontrera358]

Excelente trabajo!!!
Saludos desde Argentina...

[@chrclmnky]

Thank you Damian.

[@mikeewerton4838]

very cool, professional bait !!!

[@litoboy5]

looks good but: no gasking, no damping, no bracing ?

[@kellytaylor3915]

Nice parts.
However there is so much better wire to use for the crossovers.
Better internal wires makes a huge sound quality difference.

[@chrclmnky]

Hello Kelly, yes I was so mindless with the wires I used. Next time I should invest in more thicker wires.

[@PARAKLETOENPLETORA]

Quedo de lujo.... todo bien prolijo, eso que vos le colocaste con el rodillo ...que es pega blanca...?

[@silentkillerofkoyan]

I would buy that fine build box

[@IliyaOsnovikov]

I have not noticed any gaskets on woofer, tweeter and terminal cup flanges.

[@marwikscorner]

Илья Основиков Also any absorber materiale in side is not present

[@iridecdo5604]

as what i've spected sir. ur from Ph. 😄 the moment na nakita ko yung pader eh sure sa pinas to hehe.
sir ask lng favor pwde po pa list down po ng mga power tools nyo po? gusto ko rin mga woodworks lalo pagdating sa music/sound system.

[@adriandejesus2945]

Awesome job... Congra bro!!

[@chrclmnky]

Thanks very much

[@duece2duce]

Video of them playing? They look professional bet they sound great

[@haniaahmad5232]

crown cn-2500 professional network

[@hansparam]

Nice video. But you should also add a layer of glass wool in side the spk box to absorb the sound.

[@chrclmnky]

Thanks for the comment Paramhans.

[@menezesarthur]

Very nice work

[@chrclmnky]

Thanks again!

[@NeneProduce]

Y me diga donde comprar amplificador

[@datanggerozvlogvlogan8627]

excellent work idol galing mo polido nice

[@chrclmnky]

Thanks very much po Sir. :)

[@christiankeithmaderazo7557]

Ang linis pagkagawa😍

[@jay15vl]

Perfect, nice job

[@chrclmnky]

Thanks a lot!

[@electric_mix]

Nice

[@chrclmnky]

Thanks E M

[@travismayes23]

wow you did a great job but I'd have to sand those down again because my ADD would kill me you can tell you made those like I said I'd have to sand those down again an paint them high gloss like a piano so you can see your reflection in them but other than that what a great job

[@ruberbass5922]

me gusta, buen trabajo eso esta profecional!!!

[@chrclmnky]

Thank you Tijer Bass for the very inspiring comment. :)

[@MrTHANBAES]

Beautiful work!

[@chrclmnky]

Thank you very much!