5:16 It could be because you created the b-spline on the last frame while the tracker takes the first frame as reference. So you have to either create the mask on the first frame or set the tracker up to take the last frame as a reference frame. Hope this helps :) Great video!
Yooo. Look, i just wanted to say thank you and to tell you that since i started my YT channel NOBODY has helped me nearly as much as you. I have 8 videos now and since about the second or third one i found your vids. You can definitely notice the evolution of my cuts because every time i go through a video i watch more or your instructions. I am definitely starting to love you!!! Great work, great videos, great person. 🤘🏼😎🤘🏼
Great video. When I would like to use the glasses to become a kind of transparent so to be used as an intro where I can use my webcam in ecamm live to look blurred through this glasses? Create a transparent spot in a video ist what I am asking to be used in a intro
When setting up your tracker you need to set the reference point otherwise it takes it from the start of the clip and not from where you start the tracking (this is if you are starting your track in the middle of the clip somewhere) The option comes up in the tracking options.
Thank for the videos very informative. I have one problem every time i am trying to insert the second video media its doest work like when you pulled it from the media page. Could you help with that ?
hey billy, great video, can you please give me tips for masking out a particular object from a long clip like a 500 frames clip fast and efficiently? also at 5:58 i think we should add another effect to invert the clip sideways the whole thing so it looks natural because its a reflection.
Haha yeah you are right! That would have made it even better! For the masking, I made a video on a tool called RunwayML. I dont get any money at all for putting their name out. I truly believe they are absolutely a life saver! Here is the video: ruclips.net/video/J69NM829aTs/видео.html Here is RunwayML: runwayml.com/ Honestly, id suggest saving the 3-6 hours its going to take to truly get a good and accurate mask & pay for the plan, then cancel it after 1 month. Masking is painful lol
I have a question, at 6:32 when you go to Connect them together on the yellow line there are no curves when I do it it’s not like that why? I hope this makes sense.
billy uses a setup called "orthogonal pipes". if you right click in your node graph, not on a node, you will get options for how fusion will draw lines to and from your nodes. some people like hard right angled lines, some people like linear straight lines. it functions the same. its just for organization. but tutorials with orthagonal lines confuses some people because they think the "pipes" are all one, when really there could be many, its just that the lines are drawn on top of each other. and you need to drag from the little node tab to get your connections going, click on the little node box (the little nub on the node) and click, hold, drag and youll see your lines, then drag it on top of the next node. do some VERY basic tutorials to learn fusion and youll be happy. once the concepts make sense youll have VERY powerful options to do compositing. good luck
hey, i have a question about audio so for example if i were to take a clip that has music and somebody talking how would i be able to take the music and just have the voice over? (a video that doesn't belong to me.)
@@BillyRybkaI can't believe you gave me a heart 😯 my inspiration BTW I also love your content But I want a video that covers everything about compositing in fusion,means how we can imagin and apply in composition Just my wish ✨
Hi Billy, you’re contents are amazing and I am just learning to use (also thanks to you) Davinci Resolve. So Thank you for that! 🙏🏻 Can I ask you if you can explain in a tutorial how to create same mask like in the video of “Kold my best drone clips 2019” the flying through tent that takes the viewer into another location please? i feel such a boomer about it 😢
Hey :) I want to put any mask on a planar tracker. Like I have a street where I put a text / logo an and then it comes in like the street lines. It works perferktly. Just i want the logo to hide when it comes to an edge. Normally no problem, but in this case any mask is just doing weird things. Like instead of the edges you see...its totally screwed. As if there is an input from ....ah I have no clue. It all works but not if i want the tracker masked.(I dont want to track my mask, i want to hide the tracked logo) would appreciate your advice :)
Your video are just so awesome I have learnt a lot form your videos I never miss a single of them and congrats on 100k subs, and could you please make a video on text 3d it would be really helpful!
Hi thanks for all your great videos. Can you make a video explaining how to delete the latest version of davinci in case of glitches and problems? Thanks
Hi, one question regarding the "door opening effect". I think I did every step like you, but my second video is not shown in the marked area of my first clip. Has anyone a hint what my mistake might be? Thanks everyone in advance. Tobi
make sure you did the "alpha" node step. you may have to right click and "creat alpha node". if you dont have the blue node dotted line you will have no alpha channel to "let in" the other clip. or just do it in fusion, its a lot easier
Man your tutorials are so amazing. Would love if you can do some tutorial on Harry Potter apparate effect, or some thing similar that uses something like the puppet tool in premiere pro.
Short sweet and effective this man this man here help me a lot from my first vid back (burger freights) till now all his edit techs are so useful on DaVinchi :)
Hmmm. Did I learn something? I suppose. But the speed at which you add nodes leaves me scratching my head wondering what just happened and why! That is, why did you choose this particular node, and why did you place it where you did. I think a great video would be explaining the insides of a node and the logic that is happening when they are connected together in certain configurations. For example, you took the output from a node and put it back into the previous node's output. That worked, but I have no idea why it worked and furthermore, how would I know when I am presented with a problem which one, out of hundreds of possibilities to choose to get the effect I wanted. True enough, you showed me how to put reflections in glasses, but that is just one of thousands of effects I could potentially do. I need to know the WHY, not just the HOW. It's like the old proverb "teach a man to fish, not give a man to fish"
Hey Doug, I totally understand what you mean. This is why I mentioned id have more fusion in the future. We are making a course on it actually! I tried to explain as much as I could without the video being 45 minutes long. Its hard to balance between too much information and too little. I hope you understand :) We will be doing more fusion soon!
Casey faris has excellent beginner tuts for fusion. go simple and work your way up. fusion is your best friend. you'll never go back to layered comping
@@flipnap2112 Thanks for the referral. But I searched YT for his name and found him, but I saw nothing on YT about how to work with Fusion. Can you give a direct link?
I just started a few months ago and I'm getting better, but I need some help 😩 lol. Is there any way for you to show step by step how to cloak the predator affect and how to do a green screen with him coming out of the TV? I would pay you to show me a step by step. You can contact me on our channel with the icon thanks 😊
I dont know why the mask moves. I have a similar issue in v16. I make some poker content and we add graphics in the exact same spot every single video. Sometimes I'll do multiple poker hands on one time line and and everything goes perfect for a few hands. The graphic sits at exactly ×-841 y-437, then suddenly a few hands in Iadd a graphic and input the coordinates and its off screen, when I move it to where it goes it shows coordinates x-420y-216. I dont know why. Im not changing anything cause this type of editing is basicly data entry. Drag drop clip, drag and drop graphic, input coordinates, add blur dissolve on the end, go to the next one.
Ahh man thats a tough one. Id start hitting up the used marketplace and try to get an miners card or something like that. Now is a bad time to buy a high end card, however if you can get a low/mid-tier card for a decent price so you can at least edit. Then Later sell it and get a new higher end if you want. Id try a 1060 or something like that.
@@BillyRybka Probably your enthusiasm, as a lot of people tend to over-exaggerate their speech to sound more appealing, interesting, or some other reasoning. I personally don't mind, and actually think you sound 100x more professional while doing so.
Wait wait wait you used the words “super simple“… Not in the slightest. So convoluted I can’t believe it. Now from the speed of this video I would assume there was a fire somewhere and you had to get to it very quickly… What is your hurry? Slow down. Slow way down.
Hey Allen, feel free to use the .5 speed setting on youtube if you need it to be slower. This video was originally very long. We had to cut it down because it was long and boring to be honest. We may have paced it a bit too much, but overall pacing is a personal preference. Some people like fast stuff, others like slow. Ya know?
I know Billy already said this but you have options to change playback speed. .25 .5 and so on. slow people I speed up and fast people I slow down and then there are always the arrow keys and spacebar. hope that helps.
You are not a good teacher I weast 2day in video and got nothing from it hope this video worke bro slow down little bit Abd give some basics knowledge about things you do People get lost in your video
THANK YOU FOR 100k SUBS! WOW THIS IS WILD! You all are amazing!
Congrats!
Your thumbnails are definitely a big part of it aside from your great content! Very click enticing. 👍
congrats billy!
yoooo congrats for cruising past that 100k milestone 🤘
5:16 It could be because you created the b-spline on the last frame while the tracker takes the first frame as reference.
So you have to either create the mask on the first frame or set the tracker up to take the last frame as a reference frame.
Hope this helps :) Great video!
It's his job to tell us
This is SOOOO Good!! Thanks!!
Yooo. Look, i just wanted to say thank you and to tell you that since i started my YT channel NOBODY has helped me nearly as much as you. I have 8 videos now and since about the second or third one i found your vids. You can definitely notice the evolution of my cuts because every time i go through a video i watch more or your instructions. I am definitely starting to love you!!! Great work, great videos, great person. 🤘🏼😎🤘🏼
Dude, I found your channel recently, I'm going to do a marathon on all your videos, your tips are excellent!
Always enjoy clicking on your videos!
Thanks man! I always enjoy seeing you in the comments! 😎
Great video. When I would like to use the glasses to become a kind of transparent so to be used as an intro where I can use my webcam in ecamm live to look blurred through this glasses? Create a transparent spot in a video ist what I am asking to be used in a intro
When setting up your tracker you need to set the reference point otherwise it takes it from the start of the clip and not from where you start the tracking (this is if you are starting your track in the middle of the clip somewhere) The option comes up in the tracking options.
Awesome tip & technique video😇
Thank for the videos very informative. I have one problem every time i am trying to insert the second video media its doest work like when you pulled it from the media page. Could you help with that ?
love it awesome !!!
Thanks!! Its pretty fun!
hey billy, great video, can you please give me tips for masking out a particular object from a long clip like a 500 frames clip fast and efficiently? also at 5:58 i think we should add another effect to invert the clip sideways the whole thing so it looks natural because its a reflection.
Haha yeah you are right! That would have made it even better!
For the masking, I made a video on a tool called RunwayML. I dont get any money at all for putting their name out. I truly believe they are absolutely a life saver!
Here is the video: ruclips.net/video/J69NM829aTs/видео.html
Here is RunwayML: runwayml.com/
Honestly, id suggest saving the 3-6 hours its going to take to truly get a good and accurate mask & pay for the plan, then cancel it after 1 month. Masking is painful lol
@@BillyRybka i tried it just now, it works and thanks!
Another terrific video -- thank you Billy!
the hole world loves you
Thanks Billy, so much help 👍
Liked the 3rd tip the best have you tried doing this on video where your paralaxing round the subject, could you do a video like that?
You would probably have to either 3d camera track it or use the planar tracker :) I will look into this a bit more
Nicely done my friend. Brilliant tips. Keep up the great work man.
Thanks so much! Im glad you enjoyed it!
Thank you
No thank you Yev! You're awesome!
I have a question, at 6:32 when you go to Connect them together on the yellow line there are no curves when I do it it’s not like that why?
I hope this makes sense.
billy uses a setup called "orthogonal pipes". if you right click in your node graph, not on a node, you will get options for how fusion will draw lines to and from your nodes. some people like hard right angled lines, some people like linear straight lines. it functions the same. its just for organization. but tutorials with orthagonal lines confuses some people because they think the "pipes" are all one, when really there could be many, its just that the lines are drawn on top of each other. and you need to drag from the little node tab to get your connections going, click on the little node box (the little nub on the node) and click, hold, drag and youll see your lines, then drag it on top of the next node. do some VERY basic tutorials to learn fusion and youll be happy. once the concepts make sense youll have VERY powerful options to do compositing. good luck
@@flipnap2112 thank you sooo much for answering my question! It helped a LOT thanks.
hey, i have a question about audio so for example if i were to take a clip that has music and somebody talking how would i be able to take the music and just have the voice over? (a video that doesn't belong to me.)
Great content! Thanks 😊!
Thanks Billy for your videos. Still new to a DaVinci coming from LumaFusion on iPad. I’m still doing basics but slowly slowly.
No worries! Im super happy that these help you!
Big fan 👍
Really fast and good tutorial 👍👍
Thanks man! I really appreciate it!
@@BillyRybkaI can't believe you gave me a heart 😯 my inspiration
BTW I also love your content
But I want a video that covers everything about compositing in fusion,means how we can imagin and apply in composition
Just my wish ✨
@@BillyRybka also congrats for 100k🥳🎊
Keep creating
Hi Billy, you’re contents are amazing and I am just learning to use (also thanks to you) Davinci Resolve.
So Thank you for that! 🙏🏻
Can I ask you if you can explain in a tutorial how to create same mask like in the video of “Kold my best drone clips 2019” the flying through tent that takes the viewer into another location please? i feel such a boomer about it 😢
More Fusion yeey ! :))))
can you teach us how to do a shatter effect in davinci resolve? like, shattering an image
Billy is there ANY way to burn my project to a dvd? I have one I want to share with family.
Awesome!
I feel like such a boomer learning fusion 😅 Help
Great comment this made me laugh ha! 😂
Haha 😂 what helped me a lot when I was first learning to Start following other peoples videos and trying the effects in other ways
Right!
Hey :) I want to put any mask on a planar tracker. Like I have a street where I put a text / logo an and then it comes in like the street lines. It works perferktly. Just i want the logo to hide when it comes to an edge. Normally no problem, but in this case any mask is just doing weird things. Like instead of the edges you see...its totally screwed. As if there is an input from ....ah I have no clue. It all works but not if i want the tracker masked.(I dont want to track my mask, i want to hide the tracked logo) would appreciate your advice :)
Your video are just so awesome I have learnt a lot form your videos I never miss a single of them and congrats on 100k subs, and could you please make a video on text 3d it would be really helpful!
You make this seem soooo easy..! 😄 when I go to do masking, it’s like……… … ……. Forget it. 😂
Hi thanks for all your great videos. Can you make a video explaining how to delete the latest version of davinci in case of glitches and problems? Thanks
I think davinci overwrites each version.you might have to re download and install the older version
thanks
trucking for glasses not working well. spent all day
lol
I can only use photos not video for media 2 at 4:41 plz help cmonnnn
Did you find a solution for that i have the same problem
@@fheedo no solution....
Hi, one question regarding the "door opening effect". I think I did every step like you, but my second video is not shown in the marked area of my first clip. Has anyone a hint what my mistake might be? Thanks everyone in advance. Tobi
make sure you did the "alpha" node step. you may have to right click and "creat alpha node". if you dont have the blue node dotted line you will have no alpha channel to "let in" the other clip. or just do it in fusion, its a lot easier
@@flipnap2112 thank you. I will try it later when I am back at the computer.
Man your tutorials are so amazing. Would love if you can do some tutorial on Harry Potter apparate effect, or some thing similar that uses something like the puppet tool in premiere pro.
Short sweet and effective this man this man here help me a lot from my first vid back (burger freights) till now all his edit techs are so useful on DaVinchi :)
Im glad you enjoyed this! Im also siked that you have learned so much!
Hmmm. Did I learn something? I suppose. But the speed at which you add nodes leaves me scratching my head wondering what just happened and why! That is, why did you choose this particular node, and why did you place it where you did. I think a great video would be explaining the insides of a node and the logic that is happening when they are connected together in certain configurations. For example, you took the output from a node and put it back into the previous node's output. That worked, but I have no idea why it worked and furthermore, how would I know when I am presented with a problem which one, out of hundreds of possibilities to choose to get the effect I wanted.
True enough, you showed me how to put reflections in glasses, but that is just one of thousands of effects I could potentially do. I need to know the WHY, not just the HOW. It's like the old proverb "teach a man to fish, not give a man to fish"
Hey Doug, I totally understand what you mean. This is why I mentioned id have more fusion in the future. We are making a course on it actually! I tried to explain as much as I could without the video being 45 minutes long. Its hard to balance between too much information and too little. I hope you understand :) We will be doing more fusion soon!
Casey faris has excellent beginner tuts for fusion. go simple and work your way up. fusion is your best friend. you'll never go back to layered comping
@@flipnap2112 Thanks for the referral. But I searched YT for his name and found him, but I saw nothing on YT about how to work with Fusion. Can you give a direct link?
@@moodberry his stuff is pretty short and to the point. ruclips.net/video/HWD-dy5uXLw/видео.html
@@flipnap2112 Excellent! Thanks very much. You convinced me.
Hey can you make a tutorial video on how to cast shadow on 3D text? Btw i subscribed your channel. Thanks for all of your explaination👍👍👍
Absolutely brilliant!! Thanks for the pro tips, you deserve every one of those 100K+ subs. Thanks for posting!! 🔥💪
Have you ever considered editing for someone else? If so whats the price range
I just started a few months ago and I'm getting better, but I need some help 😩 lol. Is there any way for you to show step by step how to cloak the predator affect and how to do a green screen with him coming out of the TV? I would pay you to show me a step by step. You can contact me on our channel with the icon thanks 😊
how to remove reflection on sunglasses in davinci resolve
I dont know why the mask moves. I have a similar issue in v16. I make some poker content and we add graphics in the exact same spot every single video. Sometimes I'll do multiple poker hands on one time line and and everything goes perfect for a few hands. The graphic sits at exactly ×-841 y-437, then suddenly a few hands in Iadd a graphic and input the coordinates and its off screen, when I move it to where it goes it shows coordinates x-420y-216. I dont know why. Im not changing anything cause this type of editing is basicly data entry. Drag drop clip, drag and drop graphic, input coordinates, add blur dissolve on the end, go to the next one.
glasses technique doesn't work on 18.0.4
Great channel, I am coming over from AE and I love how you explain the details of getting the work done. You make the transition much smoother!
my brain hurts watching this, but i want to learn it
im back 😀
Ayeeee whats up my guy!
@@BillyRybka your tutorials really helped me you know
I'M sad because I love editing but I need a better graphic card
Ahh man thats a tough one. Id start hitting up the used marketplace and try to get an miners card or something like that. Now is a bad time to buy a high end card, however if you can get a low/mid-tier card for a decent price so you can at least edit. Then Later sell it and get a new higher end if you want. Id try a 1060 or something like that.
Thanks for your great tips, that's really fantastic, even if you speak very, very quickly for a German ;-)
Not an big fan of the "popular" way you present these turtoriols but I definitely learned something today. Thanks!
Thanks! What do you mean by popular way?
@@BillyRybka Probably your enthusiasm, as a lot of people tend to over-exaggerate their speech to sound more appealing, interesting, or some other reasoning. I personally don't mind, and actually think you sound 100x more professional while doing so.
Me who first masked the second clip and after that speed ramped first clip😟😩
hammer hart
nothing this program can't do, damn
wow
Hi. I think that U r Polish😉 am I right?
Is it possible to do something like what this guy does in After Effects but with Resolve using Cryptomattes? ruclips.net/video/noHUZhkfVvc/видео.html
scratching head over here, i hate fusion. too advanced for me
Haha Yeah it can be a lot. However if you take it slow you will get it :)
Wait wait wait you used the words “super simple“… Not in the slightest. So convoluted I can’t believe it. Now from the speed of this video I would assume there was a fire somewhere and you had to get to it very quickly… What is your hurry? Slow down. Slow way down.
Hey Allen, feel free to use the .5 speed setting on youtube if you need it to be slower. This video was originally very long. We had to cut it down because it was long and boring to be honest. We may have paced it a bit too much, but overall pacing is a personal preference. Some people like fast stuff, others like slow. Ya know?
I know Billy already said this but you have options to change playback speed. .25 .5 and so on. slow people I speed up and fast people I slow down and then there are always the arrow keys and spacebar. hope that helps.
You are not a good teacher
I weast 2day in video and got nothing from it hope this video worke bro slow down little bit
Abd give some basics knowledge about things you do
People get lost in your video