How To Replace Rod Bearings On E93 M3 [ 4K ]

Just a point of view video of me swapping out my rod bearings on me e93 M3.
The main tools you'll need are ass follows: engine support bar or cherry picker, ratchet or impact, 10mm, 16mm socket,19 mm socket, 21mm socket 17mm wrench, torque wrench, really long t27 star bit, 12 point 12mm socket, 12 point 11mm socket, E10 socket, E12 socket, rubber mallet, a lift or jack with jack stands, and a lot of paper towels cause its very messy.
You'll Also need something to catch the oil and power steering fluid if you plan on reusing it.
I replaced the stock bearings with ACL Race Bearings
Be connecting rod bolts (torqued to 50 tf-lbs)
oil pan gasket
motor mounts
power steering fluid
Follow the owner on Instagram!
@mr.atkinsss
@mr.atkinsssphoto
★ ★ ★ ★ ★ Supercharged Dinan E93 M3 Mod List ★ ★ ★ ★ ★
★ Under the hood - Dinan throttle bodies, VF engineering intercooled procharger kit, V3 procharger, 650 upper pulley, stock lower pulley, 1000cc injectors, 4 psi Hobbs switch, Dinan carbon fiber strut tower braces, Maxflow RACE vortech engineering B.O.V. (blow off vale)
★ Engine - Stock S65 V8
★ Exhaust - Stock headers, 2.5in. fully catless with x pipe, no resonators, and valved mufflers
★ Transmission - Stock 6 speed manual
★ Clutch - 3rd cultch (Used stock one)
★ Fueling - dual fuel pumps with a primary stock pump and a secondary Walbro 525 pump on a 4psi Hobbs switch on E85
★ Exterior - DTM carbon fiber hood, Carbon fiber lip, PSM style carbon fiber spoiler, Spectre air intake
★ Interior - P3 boost gauge, secondary pump led lights
★ Wheels & Tires - Stock rims ;( 245/35/19 in the front and 263/35/19 in the rear
★ Suspension - Stock suspension with Dinan lowering springs
★ Tune - Tuned by Jordan from RKTUNES with optional burbles and launch control
If you have any questions or want to collaborate with me, DM me
@mr.atkinsss
If you'd like to book a photo/video-shoot with me, DM me
@mr.atkinsssphoto
Equipment and Tools I used in this video:
iPhone 13 pro max
Suction cup mount
If you made it this far you might as well like and subscribe!