RC Boat Bitz 175a Esc Quick Install & Test Deltaforce 35 GPS Tested - Fast Electric Rc Boat
HTML-код
- Опубликовано: 10 сен 2024
- RC Boat Bitz 175a Esc Quick Install & Test Deltaforce 35 GPS Tested
Quick Install of the RCBB 175A ESC & 2 separate test runs with the 4060 1900kv TP power. Wire issue and fix.
Thanks for watching ironclad rc tinker test & tune everything.
Personal contact information ironcladedout@gmail.com
Yes,you made a good point at the end about lower kv verses higher kv using the same basic motor... higher kv will draw more amps from esc causing more heat...
Just got the 175amp esc and sss 4082 for my spartan. This video came right on time
really clever what you can do such a technical little Hobby has fascinated me since i began all those years ago..
Damn the roost that delta was throwing was amazing bro
Yea man the Deltaforce has always thrown a huge rooster tail 🐓 with the DF I'm able to put big props on that boat it's such a lightweight hull setup.
@@IRONCLADRC gotcha. Do you know what it weighs by chance?
The sonicwake v2 weighs 6lbs 9oz. The Deltaforce 35 weights 5lb 8oz 👊
Never been into boat's untill I have been watching this channel looks like a blast pluss the information you provided really helps with any questions I may have it's ironclad man
Thanks brother glad you injoy the content glad I can be of help. BUILD IT IRONCLAD
12 years ago i started using xt60 yellow connectors and still like them the best for all my boats, planes drones etc... they are fully adjustable and never fail for me...
It really runs good :)
Today, someone ruined their Traxxas spartan on 6s, he did a speed run on the same place i did, flipped it, landed on the nose, smacking down, batteries flies out and he split the hull.. RIP
Oh man that's a bummer. RIP.
yes propping down is what i would do if my temps were over 130 degrees for sure... maybe going from that 45 down to a 43 with same pitch seems about right imo...
Awesome runs man. Those boats rippp.
Happy Easter BIG B much love from australia
Thanks brother you too
You're introducing a nice boat today!~ That's a great video!~ So cool!~~^_^
I think the performance is even better with the boat beats 175a Esc!~~~^^
Thanks brother
I was gonna say right before this happened that those adapters won’t work, boats generate too much heat and melts the solder in them. Good run though homie!
Yea it was the Traxxas connector I knew it would let loose I had a feeling
Was Rippin!
when you say 8mm cooling line,do you mean the hole size is 8mm??? are those those the biggest used in 25 to 40 inch boats??? PS i never added extra cooling mods to my boats...thanks
So sorry about that battery connection on the ESC brother. I bought those converters because I'm basically a lazy ass and I'll do anything to avoid getting the soldering iron out!! 😂
It's not your fault Steve, blame Traxxas lol. There outdated connection failed We didn't.. it's happened to all my Traxxas plugs.
Lol me too brother I didn't feel like changing them either. I think soldering battery connector is my least favorite part of the hobby. I don't mind the motor bullets quite as much as to battery connectors. Getting the darn bullets into the ec5 connector is a pain in the but at times.
@@IRONCLADRC Agree 👍 And males are worse than females to get in those damned plastic plugs!! 😂
Emailed you a couple photos I hope you get them.
@@IRONCLADRC Got your email bro, thanks 😊
You should take a look at economaster boats in the Ukraine the big slider v bottom their mini mono and their mini rigger so well built and so good in the rough water so fast as well actually all their boats look a cut above the rest.and I think we’ll priced.
As soon as I can afford I’ll be getting a few of their boats.
I just looked them up. Yes sir, ive been looking at the tenshock hydro1 rigger for quite sometime & the mini eco. I love the way themini ecos look & handle. There's not alot of reviews for the hydro 1 rigger but the design of the boat is quite amazing
@@IRONCLADRC also I think that 175 amp esc is the exact same esc as your flycolor 150 just rebadged and Color change everyone knows they use the same program box and that the 150 is easy 175 capable.
I have the same problem with the ceap non traxxas traxxas plugs
Told you that motor likes a big esc. I do 65mph on smaller pond with sss4082 2000kv, 180A esc, 4500mah 6s, 48mm prop. Probably a bit to much for the df since that hull is heavier...
Maybe something to try as a setup.
I've run a x450 cut down to 48mm de-tongued got my pb 63 with the ose 150/4060 1900. Thanks for the setup tips
@@IRONCLADRC not sure about the tp, but with that esc i would run a bit lighter motor or just buy a big esc like a 300a/12s or something so you can power almost every motor(experiment) you have. Also have other mono2 on 4092 1800kv, Swordfish 220A on 6s . That one is even quicker (106kph), but couldn't use it in that little pond because it doesn't turn quick enough. Put on another drive, turnfins and rudder and see how it will go when weather gets warmer. Then hopefully get a prepped prop since i am not a goeroe with that. Did try a lot and watched a lot of video's, but not very succesfull.
Keep on filming and experimenting, i see in the comments people get enthousiastic about the hobby...
The 300 would be ideal but the Ole lady would sh%t a brick... I'm with you on the prop balancing I've just received 4 ABC props been working on 1 prop all day. About to pu what little bit of hair I have left out. Thanks for watching brother.
My Leopard 4082 2200kv will now move to my Deltaforce, killed another shaft and tube today on 6s on the Rico..
So tossing a 36 1750kv in the rico..
I run the original .187 octura from OSE with out issue
@@IRONCLADRC yeah, i dont know whats going on.. it chews flexaxels, destroying tubes.. well greased aswell.
but damn it ran good today!
I don't run liners in my custom builds for that reason. If your running a 1/4 stuffing tube with linner for .150 you can upgrade the cable & collet to .187 with out changing your tube.
@@IRONCLADRC .187, what does that get to in mm ?
I have uploaded videos from the runs today, even made the boat do a air screw when i hit the boye (had to go out and turn it)
It's the same size as 3/16 shaft 4.76
I like your video man also learning a lot from you my man. Damn your boat is a beast🙏I really want to know if you can get lower temp on that 175a esc with the tp motor. Or with the other motor And if the turns of the motor can be programming on the esc and will help with the temp or not …. Greating from Holland
Prop choice is what will drop the temp. Larger props demand more amp draw than smaller props kinda like spur & pinion in a truggy if I put a less aggressive prop on the boat it would run cooler Temps
Nice run. I don't know if you know of the abc clever 17 45 series. They are 2 blade props. I have gotten 68mph on 4s with my pursuit.
I just got 4 ABC 17-45 series props in yesterday working on balancing them
I am not sure i understand how a cheap battery makes electronics get hotter??? i always thought a bad ass decent quality 60c battery would make temps hotter than a 25c decent battery? I know i puffed many batts in boats do to them being the weak link in my setups... thanks
The cheap ingredients used in the lipo it self is what causes excessive heat with electronics.
@@IRONCLADRC you learn something knew every day...thanks
I had a few flycolor 150amp escs i had ec5 plugs on them running 6s...They got hot so i later went to ec8s plugs didnt even get warm.i use ec8s on everything even use the male and female brass conectors on the the motors to esc. And have the entire plug assembly on All my batteries.no issues. Ec8 are a cheaper way to go than qs8s.
Good to know brother thanks
Did you gain any speed through more amps getting through the 8 mm connects or just the heat reduction.?
@@jamesatkinson7517 Yes it had more spunk...No more hot wires.It allows more amps to be drawn from batteries. More amps more power.I have tons of batteries so I didn't want to spend 50.00 for 5 pairs of qs8 (8mm) conectors so I went with the ec8s 10 pairs for 20-30.00 I used the brass conectors from the ec8s for the motor and wires from esc to motors.they are heavy.They will add some weight but it's worth it.
SMOKIN