Cheap Mods & Hacks Sonicwake V2 Esc Upgrade, Etti Coupler Install
HTML-код
- Опубликовано: 10 сен 2024
- Cheap Mods & Hacks Sonicwake V2 Esc Upgrade OSE 150 - Collet Install V2
SONIC WAKE V2
www.avantlink....
5 to .187 etti coupler
www.offshoreel...
OSE 150a
www.offshoreel...
Y FITTING
www.offshoreel...
COOLING LINE
www.offshoreel...
Castle Creations 6.5
www.offshoreel...
SPECTRUM 5000 3S 100C EC5
www.avantlink....
OXIDEAN MARINE PROPS
oxideanmarine....
OSE ABC PROPS
www.offshoreel...
DX5 RUGGED
www.avantlink....
SONICWAKE V2
Thanks for watching ironclad rc tinker test and tune everything..
Personal contact information ironcladedout@gmail.com
Awesome video I just bought this boat from OSE ..looking foward to the upgrades . For this boat looks like a super fast hull once all upgrades. Ty for the great videos. I will keep watching for more upgrades from you for this boat.. ty Sir
Sweet love the info. Always a great help for my personal tuning an education on the boats! Much Appreciated.
That nearing is toasty. The motor is definitely worth installing a fresh quality bearing.
I agree, but I've got her smooth as butter now, I used corrosion X for a lube.
You weren't joking I love this video!!! Watched a bunch of times I can't wait for the run video brother!!
Very good informative video!👍 Thank you!🙂 I think it is worth moving the cappack further away from the esc heat sink. Electrolytic capacitors do not like heat - they will dry out and make a short circuit. Even if there is no short circuit, moving them away from the heat source will extend their life.
Thanks I didn't know that. Well I did but didn't think about it while setting up the boat. I appreciate it
Great info Big "B"! I don't need to toss my loose fitting flex collets anymore!
It definitely works as long as you modify the collet nut before the flex cable starts slipping in the collet..
Sick setup 👌 I seriously can't wait to see it ripp!!
Very nice info. Great work brother. Can’t wait to see how she does. 👊🏾💯💪🏾🔥
Simply wrap some ptfe plumbers tape around the outside of the liner in 2 or 3 places along the liner, depending on liner length. Wrap enough tape to make the liner a nice fit when slid in to the brass stuffing tube, been doing this for years without any problems with the liner moving at all. Also easy to get the liner out as well if you need to.
First I've herd that method I will give it a shot thanks
@@IRONCLADRC Yes over wrap the tape so that the tape compresses when you slide the liner into the stuffing tube. If its still a bit loose wrap a bit more tape until you get a nice firm slide in fit.
Good info B! A little trick for the UL-19 that looks like it would work on the SW. Had some water coming in past the o-rings of the hatch screws. I put "vacuum caps" on the threaded nipples of the nuts inside the boat. OBX north end here! Think it would work on all Proboats that use that type of hatch screw / nut system.
Man I appreciate it. Thanks. Do you have a link for the vacuum caps? If not it's okay. I use to go surfing at Avon Beach light house it was a summer ritual OBX is beautiful
I have to be honest you know I have this boat B lol you left me hanging , I wanted to see that thing rip lmao nice build brother!!!
Me encanta el modelismo naval, hago las lanchas de madera a control remoto con los pocos materiales que aparecen ya que donde vivo , en Cuba no hay tiendas especializadas en estos menesteres por tanto hay que hacerlo todo e inventar todo hasta los modelos y me paso mucho tiempo fabricando por falta de
That's the fun part of the hobby, building from scratch. It has its down falls
El hobby de modelismo naval me apasiona, apenas tengo herramientas para trabajar, me tardo mucho en fabricar un modelo terminado completo, no obstante he podido lograr alrededor de 20 modelos, el primero lo construi hace 50 años y es un pequeño Yate a CR, estube un tiempo sin trabajar en ellos y hace ya un tiempo me he dedicado más a éste hobby, tengo mucha dificultad con partes y piezas pues vivo en Holguín, Cuba y en nuestro país no existe tiendas especializadas. Muchas gracias por los vídeos y las enseñanzas.
What was that white powder on that digi scale Big B? Lol! JK! Love what you do bro!
Very informative as always big b!
Where do you get the red tubing you used for the new stuffing tube retainer? I don’t see any big enough at OSE website.
It's 8mm silicone tube stretched on to the stuffing tube with pliers
@@IRONCLADRC Ooh! now I see, lol. Thanks, you da man! BGFL🔥
@IRONCLAD RC hey bud was wondering how'd you like the OSE 150AMP ESC thinking about getting one but the price scares me makes me think their cheap and may heat up in 6s setup what's your opinion on it
I've got 5 of them no issues. The flycolor works a little better with a cap pack. Offshoreelectrics.com has 150a raider which is essentially a flycolor 150 with a cap pack factory installed.
Did you have to change the bullet connectors on the motor to fit in the 150amp esc? I'm asking because I just bought this esc. But I really like this 1900kv motor. Thanks! Nice videos!👍👍🍻
Yes, if I'm not mistaken the stock esc comes with 5.5mm the ose esc comes with 6.0mm bullets. Fairly certain
Curious if it still self rights no problem for you with the harbour boat but very important for me. Back from my run, no issues sonic wake and the impulse 32,
Why not using the firma 160A spektrum ESC ? (Too much power ??)
Did you loose self-righting capability with all your mods
Never lost self righting, I tried the firma at one point great upgrade 👌
Hay B, I need a new cooling jacket for my v2 stock motor, don't ask, can you tell me what size will fit the motor?
Thank you.
Pretty sure a 40 short will fit 40 long is 50 mm the stock cooling jacket is 48 mm
This water jacket is 2mm longer than stock, fairly certain it will fit? No promises 90% sure. Just know I didn't test fit just my opinion
www.offshoreelectrics.com/proddetail.php?prod=tfl-532b42
Got my geico boat kinda up and going. Water isn’t flowing on the motor to good. Got to get me a new cooler hose.
If you are running the stock motors, check the nipples on the cooling jacket. One of mine was cranked down to tight and almost bottomed out to where water was barely going through.
For the motor & ESC wiring "problem", I'm just wondering why you didn't just shorten the length of the wires on both?
I've had bad experiences with shortening motor wires, but I guess you could do that if you wanted to.
@@IRONCLADRC Honestly, you're the first person I've ever heard say that. Everyone else, myself included, had had 'better' experiences when shortening the wires. For one thing, shortening the distance between ESC & motor means less resistance, which equals lower temps.
Only thing I can think of that could cause problems would be poor soldering job (which I've been guilty of a few times), low-quality solder, not properly cleaning (ie. using flux) the wires & soldering tip before soldering, or improperly separating the wires. There are a few other things that could cause problems, but my brain isn't working properly today...at least, not yet...due to not enough sleep last night. 🤙🏼
I’m pretty new to electric boats. If this was going to be your final setup, would you want to just shorten the wires on the esc/motor?
Yes sir it would help
Whats your thoughts on the V3 Seaking 180 amp weighing in a little over 200g I think honestly that's an esc I almost purchased for other boats many times before I just upgraded the entire boat.. I would love to know if it's ironclad brother...
It's a good speed control but but it's got a low heat tolerance from my experience running the 180 in the past.
I bought this same boat in the big boi section of toys R us back in the day . it was super fast right out of the box. I don't remember exactly what happened to it I think one of my brothers (( borrowed)) it and it was suddenly lost.
So ToysRus has been out of business for quite some time and I highly doughty you bought a Sonicwake there at any point in time. Lol
I live on a saltwater river that turns into brackish but I won't run my boats there it's terrible on everything !! I wish there was something I could blast on saltwater luckily I also live in a city full of fresh water hopefully the bearings hold up..
The 8mm tubing in the description fits nicely on the stock nipples? I understand more water volume, but if you won't have larger openings in the nipples the extra volume doesn't matter. So it's a mandatory job to drill out the nippes like you said if using larger cooling tubing?
Anyone make a waterproof RX box? The stock one is a joke and my receiver got wet and boat is out of business
Hey big b I need your expertise. I put the ose 150 in my sonic wake with stock motor and a CNC 4519 prop that's been sharpened and balanced and polished. Basically the inside of the boat looks just like yours. I tried to copy you. But on my first run I can only get 27mph. I've swapped the motor wires around and nothing changed. I'm using 2- 3s 5200mah zee batteries. And have the tfl stinger. Upgraded cooling just as you did. What am I missing. Can you give me something to try. Thanks bgfl
Yea you should be hitting mid 50"s easy with that set up. Try throttle reverse, then re start the rx/tx to normal throttle, also check dual rates, do a rx/tx re-calibration. Also try changing the esc motor wires, try different configurations.
Hey big b. I've tried all you recommended and even changed it back to the stock transmitter. Nothing helped. At this point I'm guessing that I damaged the motor. When I first got it I accidently ran it with the rudder cover on. So I'm looking to put a new motor in using the ose 150esc, can you recommend a good motor. I'm looking to be in the 60's with the boat and under$100 for the motor. Thanks for your help...bgfl
What did you use for the stuffing tube grommet?? That red piece around the tube?? Mine melted haha
Simply used a silicone cooling line stretched over the stuffing tube
Big B. Just love that v2 with the ose 150A. But did you ever install the firma 180A esc in the v2?
Thank you brother.
Not yet waiting on an upgraded flexcable
Can you use the original receiver for the Sonicwake v2 with this set up?
Yes sir
thinking about doing the y connector on the esc on my v1 sonicwake 1) can it be done 2) any ideas where to put it exit or before entrance thanks
Yes sir it should be able to be done on the v1. Gonna be tricky running the exit lines but I'm sure it can be done.
@@IRONCLADRC would it better come from rudder into esc?
Hey I just recently acquired a Sonic wake and having overheating issues with it I have a fly color 150 amp ESC on it and the factory motor not quite sure where to start
Try a 4519 oxidean prop that should give you much cooler Temps. Also try adding a y fitting before the esc and run dual cooling through the speed control w/ dual out
@@IRONCLADRC I have a dual water pick ups and I think it has a 4514 props
Do you have a way I can send you some pictures of the setup maybe that would help I have only been messing around with the boats for about a year and a half now
Ironcladedout@gmail.com
Just sent you an email
What battery are you using with the 150 esc? Thanks
I usually run anything from a 5000 100C 3s twins to SMC HCL-HP 9500 150c 6s
Hi Love the stinger that you use on this boat can't fid it anywhere. Do you know where I can find one.. Ty
Ose has the stinger but you'll need an adapter plate from mad lizard to bolt it on. Stingerwww.offshoreelectrics.com/proddetail.php?prod=tfl-503b72
Adapter Plate
www.madlizardproducts.com/product-page/tfl-stinger-to-sonic-wake-base-mount-machined-error-read-descripti-descriptio
@IRONCLAD RC ty Sir have a great day
Muy buenas las explicaciones lástima que no sean en español.
I'm looking into commentary translation
Very neet and orderly looking B. Do you know where i can go to get dr. jets rules on the 12" build?
This is a link to the challenge video there's details in the description
ruclips.net/video/qkPBv3D0ug4/видео.html
What up bro?....Ive been thinking about either tac welding or just gluing a nut on top of the trim tab were the tip of the screw touches it and then screwing the screw into the nut and locking it into place so that way i can easily adjust my trim tab up and down with just a turn of the screw.
That would probably work it's worth a try. Shoot I might try it one day? 🤔
What size drill bit do I use to drill out the stock esc?
I used a stepped up drill bit set can't remember what size I used. I apologize
do u know how to set a sky wing 120a esc?
Sure don't brother wish I could help
hope the self righting still works ? we will see.
It does I've already running the boat
No way I would replace the ESC on that boat,sorry but backing up in my opinion🙈
That's not a firma 160. It's a 120
Iornclad I’ve been watching your videos for 2 months and I’m getting back into the hobby I currently found my old aquacraft rio ep if you own one could you make a video ?
The issue is one of my rudder control arm is broken and I can’t find a replacement for it what advice can you give me
or if to buy an entire aftermarket rudder can you lead me in the right direction
I don't have a Rio but this might be the part your looking for? Let me know if this helps?
www.amainhobbies.com/aquacraft-machined-aluminum-rudder-control-arm-.461.0-v24-aqub8710/p639523
@@IRONCLADRC no unfortunately it won’t work
AQUB8740 is the specific part I need
but I might just reinforce the transom with fiber glass and resin and install a rudder from ose
Might not self right like that.
It does I've already run the boat
De herramientas.
Wanna sale that 120 speed control?
I'm gonna use it for another build.