How To Make Miss Geico Zelos Proboat RC Speed Boat - 3D Printing Fast Twin Brushless Motor RC Boat
HTML-код
- Опубликовано: 11 сен 2024
- How To Make Miss Geico Zelos Proboat RC Speed Boat - 3D Printing Fast Twin Brushless Motor RC Boat
In this video we will show you how to make a Miss Geico Zelos Proboat RC Speed Boat. Use 3D Printer make a great Twin Brushless Motor boat. How to make a Miss Geico Speed Boat ? How to make a Fast RC boat? Watch the video to find out now.
Thanks for watching this Video. If you like this video then hit the LIKE button, share it and also make sure you don't forget to subscribe my channel for more upcoming awesome projects.
If you have any question related to this project then let me know in this comment section below
▶ SUBSCRIBE OUR CHANNEL : www.youtube.co...
-----------------------------------
Follow me :
▶ Instagram : / craftchannelstore
▶ Facebook : / craftchannelyoutube
▶ Twitter : / craftchannelyt
▶ Pinterest : / craftchannelyoutube
▶ Blogger : craftchannelyt...
-----------------------------------
Boat Stl Plan : www.thingivers...
Here's the parts list:
1) Waterproof Epoxy : s.click.aliexp...
2) Epoxy Resin And Hardener : s.click.aliexp...
3) Colloidal Silica : www.westsystem...
4) Steel Putty : www.amazon.com...
5) Flexible Shaft Support Frame : s.click.aliexp...
6) Dual Water Nipple Nozzle : s.click.aliexp...
7) Rudder Blade : s.click.aliexp...
8) Aluminum Motor Mount : s.click.aliexp...
9) Dynamite A3650-2000Kv, 6-Pole, Water-Cooled, Marine Motor : www.amazon.com...
10) Flexible Shaft Kit CW CCW : s.click.aliexp...
11) Propellers : s.click.aliexp...
12) Waterproof Digital Metal Servo : s.click.aliexp...
13) 6 Channel radio control system : s.click.aliexp...
14) 120A Brushless ESC : s.click.aliexp...
15) Lipo Battery : s.click.aliexp...
16) Low Voltage Buzzer : s.click.aliexp...
-----------------------------------
Here's the song list
Song 1: Unknown Brain - MATAFAKA (feat. Marvin Divine) [NCS Release]
Video Link: • Unknown Brain - MATAFA...
Song 2: Jim Yosef - Link [NCS Release]
Video Link: • Jim Yosef - Link | Hou...
Song 3: Lensko - Circles [NCS Release]
Video Link: • Lensko - Circles | Hou...
Song 4: Elektronomia - Energy [NCS Release]
Video Link : • Elektronomia - Energy ...
Song 5: Max Brhon - Cyberpunk [NCS Release]
Video Link: • Max Brhon - Cyberpunk ...
#craftchannel #missgeico #rcboat
![MISSING: SLIM SHADY [Expanded Mourner’s Edition Trailer]](http://i.ytimg.com/vi/xh8qgHrOO1g/mqdefault.jpg)
Never would’ve guessed that thing was 3d printed before yountold me 🤯😍
Thanks :)
Im sooooo so happy this video is still around.. Ive seen this a couple of years ago and have sworn to my 2 sons we were going to build this. Now that a few years have past and they are old enough AND i have a little desent understanding of 3D printers it is time to make this with my 2 sons. 😍 This is going to be such a cool winter project to do with them !
I cant stress enough how happy i am to still being able to watch this video as it will be of great help.. Maybe the partslist is not up to date anymore, but im sure ill be able to find good alternatives.
Thank you so so much for putting your time and effort i this video for others to enjoy and try and build it aswell.. You are a legend !!
So Cool 😎 man after my own heart or steptoe and son👍
Thanks
Сдраствуйте вы просто супер молодец сделать Такую красивую игрушку не каждый бы не смог бы заделать просто класс просто супер
Спасибо за хороший комментарий
Awesome ideas bro
Thank you bro
Fuc…. Awesome 👍🔥👍🔥👍🔥👍🔥
:)
NICE JOB AMAZING 💯👌
Thank you
Hsyzhzydjzhsksbsksjekejeusyeyeueeuwi
Team #missgeico görse kıskanır
#proboat liginde siz daha iyisini yapana kadar en iyisi bu 👊🏼👊🏼👊🏼
Destekleriniz için teşekkürler
For some reason that windscreen canopy always reminds me of Gypsy Danger,pacific rim. Amazing build. 10/10
Thank you
👍🏼
guess nows not the greatest time to tell you... but you should have printed the stern another inch deeper..
Your strut angle is too high. That's why it's hopping. You have enough weight with 4x3s to prevent that hop or "porposing" effect at speed.
Need to redo with adjustable drives.
I may be wrong, but looks like you sunk the adjustment set screws below the body in epoxy?
Ditch the dual pickus in the bottom for a dual pick up rudder, with a dual pump system.
Just use the pickups in the rudder to supply the pumps. Constant cooling, sitting still or moving!
Plus, it looks cool with water squirting out the exhaust ports, sitting still! (Pumps run off the RX. (3-6V)
Not sure liquid steel would be my "sealant" of choice. Does it hold up to high speed and vibration / crashes, very well? Any cracking showing through the paint after running?
Use mercury PTFE marine drive grease. It doesn't sling out as bad as that thin stuff. Plus, it has better friction modifiers.
Nice rudder! But the boat would benefit from a dual pickup, the bottom pick ups, disrupt the ride surface, when it planes out.
Scuff the bottom of the hull with light sand paper. No gloss there. It helps create more of a "hydrophobic" effect. Your hull will be capable of going faster.
Check out Chris Hoffman, owner of Das Boata props. He's on fb and has website.
I think it's www.dasboata.com
You want the super geico twin, screws! Those will turn that boat in to a UFO!
I run them on my Zelos 36 and Geico 36. Awesome props!
Switch over to 2x6s 5000mah +++... 100+C, packs. Weight reduction and mass centralization.
Ball bearing adjustable drives... major upgrade of the brass liners.. they burn out over time and allow prop wobble.. costing you speed.
Good luck!
thanks for the useful information
very, very nice great work
Thank You
Top, profissional job, i change the controller to one from rc car
Thank You
wow really superb brother 🔥 🔥 🔥 🔥
Thank you bro
u r a god
Hi I love RUclips videos and having RUclips is a good thing
Как круто когда руки золотые ! Вы молодец ! Очень круто получилось ! 🎉🎉🎉🎉🎉
perfect boat
Thank you
*Quá tuyệt vời bạn ơi*
Cảm ơn
Video paylaşım çok hoşuma gitti elinize emeğinize sağlık TEŞEKKÜRLER
Güzel yorumunuz için teşekkürler
Amazing RC boat
Thanks bro
🙏🙏🙏 şapka çıkartılır şahane yapılmış müthiş bir sürat, elinize emeğinize sağlık.
Teşekkürler
Amazing make other boat 😍
Teşekkürler
Thank you for this , you are a pro ! This is heaven on earth and you are the creator of it.. thanks from the Netherlands .
Thank you ❤️
Brilliant video mate you made a great job on it don 🤠🇬🇧👍👍🇬🇧
Thank You
Videoları keyifle izliyordum ama tek bir reklam bile çıkmayınca ;
DADINA DOYAMADIM VALLA :)))
I started this project in September last year and it stalled.. I have the hull printed, sanded, with epoxy and the putty on.. sanded again and primed.
I now have time to continue on this project and I'll be finishing it next month. I'm planning to FPV it too. We'll see how it turns out.
Thank you for this upload. I am at the paint stage. I did reinforce all the seams with 3/4oz fiberglass strips and epoxy with micro balloons. Also printed the front 1/3 with infill for ballast and structural rigidity. Will start on the hardware and electrics shortly. All components were purchased from offshore electrics.
Magnifique tres bonne trabail
Merci
Not bad at all but seems like a lot of work considering the 3d printing.
Good job.
Thanks for the nice comment.
Üstat mükemmelsin. Çok hoş duruyor. Devamını bekleriz 😀
Güzel yorumun için teşekkür ederim. Daha güzel projeler üzerinde çalışmalarım devam ediyor. Bittikçe paylaşmaya devam edeceğim.
@@CraftChannelYT Ben 3-4 ay önce Laimer tarafından tasarlanan fırçasız motoru(3d printed brushless motor) yaptım. Bence bir göz atmak isteyebilirsiniz. Hoşunuza gider gibi ama biraz meşakkatli bir proje olur ama bittikten sonra çalışmasını görmek daha güzel.👍🏻
Здравствуйте,GEICO получился суперовый просто бомба,владельцу большой респект за такую проделанную работу.И огромное спасибо за выложенное видео,
Спасибо за хороший комментарий
Anca bukar olur tebrikler emeğinize sağlık👏🏻👏🏻👏🏻
Teşekkürler
Muhteşem RC boat olmuş
Teşekkürler 🙏
Harika 👍 👍 👍
Very good job !
Thanks
Çok muhteşem çok güzel olmuş ellerine sağlık abi
Teşekkürler
This is awesome. This is very special ability ! You are gorgeous babe 👍🏼
Thank You
Perfect 👍🏻 omg your so very smart
super olmuş . detayları ve gidisi çok guzel
Teşekkür ederim
AMAZING bro . The body of the boat is amazing
Thank you bro ❤️
Nice built....but i want try it with 1 motor/1 esc/ 2 battery etc should i give a try?
Hey please build large RC boat
Coming soon
Mantap bang
Terima kasih
harika harika harika tek kelimeyle muhteşem
Güzel yorumunuz için teşekkürler.
marvelous creation and it doesnt look 3d printed just the same as other projects
That’s awesome looks like the real deal 😎🤩👍
Thank You
Super la vidéo
For us this is just 22 minutes of entertainment but this spend allot of effort and smart work amazing talent
Thank you for your nice comment
Fantastic boat! Amazing job! :)
Thank you bro ❤️
Harbiden üst düzey bir çalışma olmuş .eline sağlık.
Teşekkürler
Very good work Super.🙋🙋🙋🙋🥰🥰🇪🇪🇪🇪🇪🇪🇪🇪🇪🇪
başkan arabayıda bi yıkat be :) rc tekne muazzam bu arada
Yine harika bir çalışma, tek kelime ile muhteşem 👍👍👍
🙏 teşekkürler
wow ridiculous amounts of work, good job bruh. I love my RC boats this is superb, prob worth 4-5 times what the Proboat one is worth with all the hours of work you put into it. imnpresive to say the least. wanna race? hahaha
Thanks :)
Mukemmel olmus, printer su an basladi.
Emek büyük bu işi hakkıyla yapıyorsunuz inşallah iyi yerlere gelirsin ❤️
Teşekkürler
🚤🛥️⛵🛶⛴️🚤🛥️🛳️🚢🛳️🚢🚢🚢
Çok beğendim
Teşekkürler
Fast and furious
Cok iyi
Soluksuz izledim. Mükemmel bir video.
Güzel yorumunuz için teşekkür ederim
WOW so Nice 😍😍🥰🥰🤨👌😘😘
Thank you
these are nice boats, i printed 4 boats so far but haven't got to this extreme yet very nice build
Thank You
Did you design them yourself?
@@Koolkole27 No mate but wouldn't be very hard to do on fusion 360
Love it!
Thank you
Helaaaaallll🎈
Teşekkürler
Mükemmel 🤩
Teşekkürler
Trabajo perfecto envidiable!!
WoW, AMAZZZinG!!!! Welcome to 2021.. ;-))
Thank you so much for uploading this whole process, I think this will spare me a good amount of time... I do own a 3D Printer but I'm not so familiar with things like weight positioning, choosing the right electrical components and so on. An RTR model of this is about 600-800 euros in Germany, would you be so kind an tell me how much your build cost when finished? Or at least if you stayed under that price or paid more? :)
The purchase links and prices of the products are available in the description. Thanks for your nice comment
Yo can you make me 1?... lol
Mükemmel bir çalışma 👏👏👏
Teşekkürler
respekt it is a very ice build but on some places it is varry bad i hope u fix som smol things and than u have a buty
Nice rcboat
Yine Harika Bir Çalışma Olmuş. Emeğinize Sağlık…🎉
Teşekkürler
진짜 잘만드셨네요
좋은 의견 감사합니다
I've been wanting to do this for the longest of time, but double the size of it, just never got around to doing it yet
your boat wouldnt be as fast and its hella expensive
@@agentpredatorgaming3196 Naw mate the design of it is pretty simple to hold 2 motors and with my electronics( 2x 8 ESCs and motors from the Blackjack 42" boat) it's a handful on 16s.
Habe mehrmalig gesabbert, ich hoffe das lag am wunderschönen Video!
Wow amazing mantaps
Awesome 😲👏👏👏
Thank you
Amazing video very nice!!!
Thanks man :)
Beautiful creature. Have you info about speed? Thanks man
Thank you. Gopro gps 137km/h
@@CraftChannelYT a beast
Excellent craftsmanship!
Great video, wonderful model, I have now imported the STL into SketchUp to make changes, I have already made covers for the Flexible Shaft Bracket which are then glued in with epoxy or silicone, foam would not be my thing right now.
I Just joined I'm now a member
I have a 3D Printer and would love to make one similar
I'm a experienced R/C Boat owner with many years of making, tuning, tweaking, R/C Boats.
Please reply.
I am so glad you joined us. How may i help you ?
Well done! Very nice job. Thank you for this video. I was wondering how to built one of this beautiful boat. Now I see.
Amazing !
Koptu gidiyor #missgeico 🤘🏼
Muhteşem 👏🏻👏🏻👏🏻
teşekkürler
Music way ott
Muhteşem 👍 👏
Teşekkürler
Beautiful 🤩🎉
Hi.
First of all, thanks a lot for the brilliant movie with the miss geico motorboat 🙂. You inspired me to do it. I only have a question, the rudder you used in the short or long version? I mean 502B38 or 502B38. Same I wonder what diameter to use? I understand I have to use one cw and ccw? Unfortunately, I never built a boat. So I hope you can advise me 🙂
Regards Sebastian
simply amazing, you just gained a new subscriber!
thank you for the nice comment
How many cells to used lipo battery?
6s
😃😃👍👍👍👍
Looks great, I was wondering what is the dry weight without hardware.
Thanks. 700-750 gr.
Excellent video👍
Great video thanks.
The question I have is how do you print the Geico decals? Please advise.
Thanks, Bill.
Wow you are Machine you can make it my hand wow cooooooooool
thank you
Dam amazing build and I have the ProBoat MG29 and MG36 and you made the perfect of both in one with this ,love it💪👀👍Badass🏁
Thank You
Came for the video.
Left because of the music.
You deserve to have millions of subscribers, bro!! Watching from Philippines.