Beginner's Guide to Woodburning. Pyrography BASICS
HTML-код
- Опубликовано: 25 окт 2018
- Woodburning is affordable and lot of fun! Here's what you need to know to get started in pyrography.
-----
Download my FREE GUIDE to setting up a shop for under $1000 ►► mytoollist.com/
................................
Here's the woodburning kit I used in this video: amzn.to/2EMggT5
TOOLS I USE► amzn.to/2F3hxQc
WWMM T-SHIRTS► amzn.to/2scxfYl
FACEBOOK► / woodworkingformeremortals
INSTAGRAM► / steveramsey_wwmm
_
Music:
"Princess Meow-Meow's Theme" and all the cool music on WWMM is created by Per Almered. ----AWESOME!
----------------
MAILING ADDRESS:
WWMM
448 Ignacio Blvd. #237
Novato CA 94949
----------------
Woodworking for Mere Mortals® is a registered trademark of ZRAM Media, LLC.
#woodburning #pyrography 
Хобби
![Wood Burning Techniques for Beginners: [4 Basic Pyrography Techniques + Bonus]](http://i.ytimg.com/vi/UVT1biX3Vmk/mqdefault.jpg)
![Wood Burning Techniques for Beginners: [4 Basic Pyrography Techniques + Bonus]](/img/tr.png)
I haven't used carbon paper since forging my mom's signature to go to a school dance in 7th grade. 😂😂 I got caught. Thank u for this video
That made me laugh out loud!!!
I admit same here but eventually got caught on a report card by the teacher 🤦🏻
😂
Using woodburning as in the video would still have got you caught, but would have been massively impressive!
Hahahaha 😂😂😭💀⚰️ facts.
I do this for part of my living as a custom woodworker and sign maker. I use Magicfly graphite transfer paper, which is readily available online. If you buy a set of brass tips, you can actually shape them to suit your needs with a file or even a belt sander. Charcoal pencils are useful for filling in light spots caused by knots or grain, just don't use brush on coating if you use charcoal pencils, as they will smear. Spray-on coatings work best. Also, if you just burn the outline of your letters or image, it makes painting them easy, as the paint will flow to the wood burnt line, (which is slightly indented) and stop.
Fantastic tips, thank you so much.
2:40 For those with Laserjets..print your image backwards as usual on normal paper, secure with tape on piece of wood. Saturate with lacquer thinner (you can do smaller areas one at a time as well) and burnish with something that wont tear the paper. I use a rounded edge piece of wood, maybe 2-3In wide. After burnishing is done, let dry for 15-30 min and remove paper.
I found this to be the best way to get even the smallest details transferred. I've used this for detailed wood routed signs, and it works SO much better than routing through the paper.
Enjoy..
Pyrography combined with wood carving can produce some wonderful results.
Great idea to combine the two!
not only that,but imagine both methods applied to something like a full-length dining room table ;)
This video helped inspire me to start doing a lot more pyrography with my business. Prior to watching I was outsourcing all engraving work, now I’m doing all the personalization with a wood burner. Thanks!!
If you want your tips to last, don't use sandpaper to clean them, it will destroy them. Use brass scouring pads instead.
Thats a realy good idea, thanks
Steve, everything I look for some wood crafting ideals I always find you and I'm so glad that you cover almost everything that I need. Thank you
Never knew about inkjet transfer. You just made my wood burning alot easier. Thanks.
From personal experience and the destruction of 2 wood burning pens, do NOT change the tips while hot. Metal expands and over time it'll strip the nibs and the receiver area that they screw into.
It's not worth working on a piece and the tip pops falls off due to the threads not holding.
Mikki Evans Would graphite lubricant (I think that’s what it’s called) help you in that situation?
Mikki Evans.... Big big time thank uuuu for tip I wish I would have known that a couple of years ago.... 🙈🙈🤷♂️🤷♂️
-Btw Did you tried what the other guy suggested.... Some kind of lubricant??? Thanks
Mikki Evans, well thanks for telling me I learned the hard way the tips are now hard to screw in what should I do but a new kit or idk someone help me
Agreed! I wanted to yell when he said that hahah
I'm about to get into pyrography so thank you so much for sharing!
I've never wanted to actually buy dollar shave club before! 😂 Thanks for the tutorial. My husband & I are accidental woodworkers--we stumbled onto the hobby because we kept needing to fix things, lol! Then, when we finally fell in love with & bought our first house, we found out it was built by a master carpenter, with the perfect space for a woodshop in the basement. ❤️ He did the trim work in the national archives, some of it w/super-intense detail, that was either carved or burned into the wood. One of the scrap pieces is mounted in our living room. ❤️ So, I feel like the woodworking hobby *found us* and wouldn't let us go! We love your videos, & thanks for all you do.
I literally bought this exact kit today and come home to find your video waiting in my notifications! Must be destiny! Thanks for the tips! 👊🏻
I bought the same kit a couple days ago as well and then see it in this video! YAY!
Genuinely needed this so much - got one as a present and had no idea where to start
Choped Woodbeam Cortex was my first base, and fun to play with all kind of woods. Pyrography is fun, I do and learn around 3rd years now, and it's awsomeness 👌
This is pretty interesting. Thank you for another basics video Steve
Great video Steve. A quick tip regarding the cleaning of the tip. Don't use a sand paper to clean as it will erode the coating on the tip that helps it to get really hot over time. Instead use the solder provided to re-tin the tip and clean it with a wet sponge.
I used to do wood burning years ago. Thanks to your video I am going to return to it for my winter pastime
Just used oak for my first time ever doing this lol and it was tricky but it went soooo good! I may end up hooked doing this. Such a cool way to make unique gifts.
Oh my gosh, exactly the kind of video I was looking for! Thank you!
Thanks so much for posting this! I just got this kit and I'm using it for a project, and this gave me some pretty good pointers!👍
Thanks Steve! I received a kit for Xmas last year and would like to use it to make a gift for the person that gave me the kit. This video was super helpful.
Thank you. You've taught me more about woodburning in a few minutes than the...well, awful book I got to try to learn this art form. Your work is excellent, by the way. I'm grateful.
I’m buying a kit tonight. Can’t wait to experiment with this! Thanks for the tutorial video
I bought one of those a few years ago to do some lettering on a wall plaque for a friend and haven't used it since, didn't really know how. With this info I can get it back out and try something more interesting. Thanks!
I used to do pyrography when In was a kid. Just recently I bought a new burning kit but haven’t had time to use it yet. It’s a skill I’d like to try again.
Thanks to this video I just got my first wood burning tool and I'm setting at my mom's kitchen table waiting for my burner to heat up
I love the nightmare before Christmas theme! My all-time favorite movie! 😍
The included solder is for tinning the tips on first use. It makes them last longer and burn better. Basically you just wrap a brand new cold tip with solder then turn on the iron and wait for it to melt around the tip and drip down to the table.
This video is great! My wife had the same kit. This will help her get more out of it!
Funny enough I have that same set. Took a few shots at it in the past with less than desirable results mostly due to wood grain drawing my pen off track. With this video in mind, I think I'll take another shot at it this weekend. Thanks for the tips and inspiration Steve!
ahhh ive just started looking into soing this for a project, so this was all super helpful - thank you so much!
Great idea Steve to combine both it's beautiful 👍👍😍👌👌👌👍
An overhead projector is only 50 bucks. What is nice about this method is you can make the picture fit the piece very easy. Easy to shrink or enlarge dimensions. You can also change the angle the picture is displayed on the piece. You don't have to have clear film. You can use onion or parchment paper in the printer the light shines through more than enough for outlines.
Great suggestion! Then the wood stays clean.
Great method for murals too.
@Duck Soup Craigslist, Facebook Marketplace.
thanks for the tips, was just looking to give a try at this and this video just happened to pop up thanks for the demo
Well your a very lucky man to get such a great find and glad to see it going to a real woodworker rather than a burn or dump. I can see you dreaming of projects and imagining what you can design while your taking it down. I live in NC and would love to have some of it if you wind up having too much to keep. Of course I think you will be using some of it to build your own covered storage woodshed out of.
You have some really great tips in here, I might have to use them in mine and my dad's videos.
Thanks for this video! Just got one of the Weller pens today and this was SO helpful!
I love that you're using "A nightmare before Christmas" for this. Great video.
Great guide to woodburning Steve! Thanks!
Thanks Steve. Going to try it, wish me luck.
Great tutorial. I guess a pro tip would be to use a different colour for the inkjet transfer. That way, anywhere you see, say Red, that is the ink and where you see Black, you have burnt in the design there.
I can't believe I'm just seeing this video! A man of many talents, you make me proud to bear your last name 🙂
Very informative, well done and thank you.
I sign my woodworking projects this way. And add comments like made with love dad
Ya did it to me again Steve, now there’s something else I want to learn to do.
Great tutorial, I love woodburning
My top tip is.
Don't lend it to someone then fall out with them ; -)
You might get better laser transfer results by using magazine paper. Its often used for transferring photo resist masks to circuit boards, look up "PCB Toner Transfer". Works especially well by overprinting magazines, you don't need to go buy special paper. Great video Steve, as usual
Just found out I can transfer prints/drawings on paper to the wood. Been sketching it directly to the wood hehe thanks for the video, it helped me a lot!
Great video. Thanks for your effort. I know my interest now
Thank you so much for these videos, you are so cool!!!
Thank you for some great tips!
Hi. I'm from Kazakhstan. You have a great job. I also recently started doing wood burning.👍
My wood burnin kit is from the 60s/70s it's a children's set lol. Times have changed wow. Got it for $5 does the job
My father taught me pyrography when I was 8 or 9. Over the years, I did it on and off, but got back into it some time after the winter holidays. I made multiple name tags for people going to college, and sold one for $3. I am mostly self taught, like with wire jewelry.
Thank you this video really helped!
Steve, I absolutley love your channel! Just wanted to let you know, the way you worded the work shop set up guide, kinda sounds like you're charging "under 1000" for the guide, not that it's a guide to help people set up a budget-friendly workshop. Thanks! I started woodworking because of you!
What a great idea!
thanks for the tips. I am just starting and want to get better.
Would a gallon of petrol and a match count as abstract pyrography?
I like it!
-_-
They made me giggle and somehow manage to catch me off guard lol
hell yeah man
I love pyrography thanks Steve
i believe the first time I've used this transfer technique was almost 20 years ago. Using an old HP laser printer made a print on the label paper, applied thin layer of glue or lacquer on the wood, transferred the print and applied the finishing lacquer on top to protect it. If I try hard enough, I may still find that piece somewhere in the garage
That's awesome I'm doing it 🙌
New to this. Thank you ☺️
You are a pro at advertising, just saying! Lol love it I'd hire you! Love your work of course too
Great video COUSIN!
Nice work thanks for your time
Excellent vid. Many thanks. A reminder to relax enjoy the therapy. (Not sure about that 1:15 of advert T-Shirt.)
Nice job 👍
I'm so happy you made this video, Steve. I didn't even know what pyrography was until the ouija board video, and now this--I'm super interested in it. It's a cross-section of art and woodworking that I find extremely appealing, personally! You might say I'm...FIREd up for this? *fist bump*
Thanks John! It's super fun and relaxing. Find your zen place!
Try using MDF as a grain-free and very flat wood. Be aware that as MDF yellows with time, that the very lightest woodburning details will appear to fade. Great video Steve.
Have you ever used a cutting knife attachment for your wood burning tool? I tried mine and I can't get it tight enough to stay in the tool. That little bit that is supposed to squeeze the tip to keep the knife in place won't slide up... I could really use a video on how to get this tip to work please. Thanks!
😮 Savage warrior Boa staff wood burning 🔥😊
Thanks for the video, the tips were very helpful. Especially the laser jet transfer, freehanding is not in my skill set.
I've used before for projects I've given friends and family to personalize who it was for, from, and usually a small message like 'Happy 4th Birthday' or "Don't break this one, you won't get another".
I'm with you...freehanding is definitely outside my skill set!
Hello I am a new subscriber to your channel and I just love you're videos. I have a question can you show how to install a door to a pine crate? No one has a video of that nature. I am just starting to do wood work and I still have alot to learn. Thank you for every video you make and share with us. You're amazing.
Good presentation. Interesting.
love yer channel steve
Hi steve... thanks for the vid, love ur videos, so entertaining... i have one request, please can u build a pool table, i want to make one, but still an amateur...there few videos on utube, and old ones...a pool table that can be converted to a dinning table, and the benchs for storing the cues n balls...ultimate man project
Pyrography is one of those things that is easy to learn but annoyingly hard to master in my experience.
How about pornography? :-) :-) :-)
@@juncags1 it's hard too if you looking the loli type because the FBI will knock your door out.
@@juncags1 there was a time when guys wouldn't dare to openly express that they used porn. Why? because it wasn't normalized and people understood that it's unhealthy to have your mind warped by that garbage. Those were the good old days.
@@ASMRyouVEGANyet Its just a joke...relax
Porn is awesome
I actually use a pocket projector and a lazy susan with register marks for doing the images. You can pick up just a really cheap one since all you need is for it to function, and just have to make sure your mounting scheme allows for it to rotate without skewing. All in all not that much effort and allows you to burn without ink or toner getting vaporized.
Inspiring!
nice video !
Thanks Steve! Wish you could've started out the video with *MICRO-JIG: MAKER OF THE GRRR-IPPER!*
Rey good video .
I'm a woodburner woodburningbyseth great video not only is hand burn fun and relaxing but you can do so much more than a laser laser is not pyrography there's no Hart or really art involved in it
Steve, I like that shirt you're wearing during the DSC ad segment. Would you happen to remember where you got it?
Laser engraving, and cutting, is fun.
Aw, I have a Walnut Hollow kit I bought early 2000s & I totally could have used a temperature control. Still love it though.
Hi quick question, how many watts do i need in my tool for it to work perfectly for a project? I was looking for a new jigsaw and the same brand had two models that (in my rookie and inexperienced opinion) only changed in the power or the amount of watts, i could see the same with drills and other tools. Btw the project i want to start is a table made with pallets.
i really love your channel, im learning a lot, never in my 24 years worked with wood but now i know a thing or two :D
for the laser print ones you can use acetone to trasnfer instead of an iron
Refresh my memory, if you don't mind. Why is it that you like lacquer so much? Thank you, Steve for your time!
Always great seeing your videos Steve ! I have the same woodburner but mine does not have the heat temperature gauge like yours.
Hey, Steve. A bit off topic, but I have been trying to get a laser print transfer onto some pine. I have used Acetone and Polycrylic. The acetone gave me uneven transfer, and the Poly had problems staying on the wood while I was rubbing off the paper. Any suggestions? Thanks.
Thank you for your informative videos. As a beginner wood burner, I have lots to learn. I just finished a charcuterie board. I added Derwent colored pencils to the design for color. What would you recommend using as a top coat that is food safe. I’m concerned if the top coat would promote bleeding from the colored pencil. Thank you.
I have trouble with wood burning tools, because when I draw, I hole the pencil super close to the tip, with this you have to hold the tool higher up, and don’t get as much control. Thank you for the video tho, very helpful
Could you use a soldering iron from stained glass?
Wow!!! Wow from Brazil! Loved the tips guy. Just tell me please what kind is this burner? Where can i buy one the same of it? Am retired from work n i am feeling to start burning wood to have some extra money..
I made a pirographo out of a microwave trafo. But it burns my hands and didnt work very well..i need to find a good device.
I keep expecting the Micro-Jig interruption at the beginning of the video. "...more technically it's called MICRO-JIG!!"
Work safer! Work smarter...
I do kind of miss those intros lol
I'm an artist too.
I do Pyrography.
:)
One time i got an offer from a business person to draw for them.
I declined because i only do for private people.
Pyrography is VERY cool and beautiful if done right.
Even simple drawings are very beautiful.
Speaking of pirogr... pyroga... pyrgraf... woodburning, I'd love to see your take on a Lichtenberg project. A salvaged microwave transformer and some sodium bicarbonate, and you're on your way. The patterns would be especially creepy in a Halloween motif! :)
Hey FYI Laser printer with Mod Podge gets photo quality transfers