Thank you. Brilliant video you answered the questions I was asking everybody and yet you are the only person I have seen to address these issues! You deserve more followers.
Just had the sping problem, have game tomorrow, so i needed to fix it instantly.....so, i have bent the first spiral, since it broke flush, in a hoock shape, it was almost like factory, hooked it up again and works flawless....so far. Thank you!
novritch diameter of the piston goes to all cylinder vsr10 ? i have a mapple leaf cylinder and wanting to know that. if not wich piston has a removable piston end to change it to 45 - 90 dégré ? does the PDI Hard do that ?
I have TM L96 with full internal parts from Action Army. In my case, when I pull the bolt, piston doesn't get caught for like 3 out of 10 times. So it seems like I need sorbo pad, but I can't find one. All I can find is pads for VSR platforms. Do u have any advice? Maybe I should make one by my own?
Honestly, you can basically buy some o rings or the plastic rings that plumbers use and make your own, its very easy. But the VSR 10 ones might also fit, why dont you give it a try?
Hello, just asking if anyone has an idea on how should i approach my problem with replacing the spring of my Lancer Tactical m40g, when i tried on the new spring when I cock the bold and try to push it back into place it just flies back and fires the gun. I wonder if it has to do with the new spring being an inch longer than the older one
I had this problem with my ssg10. I used a piston from my vsr10 and it was functional for a little while. Then it wouldn’t rack back and it kept firing without me touching the trigger.after I realized the problem I switch the the ssg10 piston and yes it was able to rack and shoot. The problem was that it doesn’t seem to put enough power behind the bb like the vsr10 piston I don’t know if I need to replace the ssg10 piston. I was wondering what you would recommend me do or what the problem may be.
What do you mean by it wasn't seem to put enough power? did you have less joules with the Novritsch piston or was it just a feeling? if the piston head is not damaged, your problem does not sound like its caused by the piston. it might be maybe an air seal problem. i would recommend to disassemble the cylinder and put some silicone grease (not oil) to the piston head threads and then screw it back again. then try to check is you have a good air seal. let me know afterwards and we take it from there together =)
@@GaijinAirsoft It isn’t so much a problem of power but more of a fact that the bb does not seem to have as much range. Even with the hopup set to full hop it doesn’t rise ,just drops.now if I am using the piston used in the vsr10 it takes the hopup adjustment and can hit those far distance shots. And now that the hopup from the vsr 10 isn’t functional in my ssg10 I have to resort to the ssg10 piston which doesn’t give me maximum performance. But I will see how your idea works out. Thanks for the response.
Can you help me? The spring guide will not come our of the cylinder when the piston and spring are removed. The bolt will not catch when it's racked back. The only way to removed the spring guide is to remove the trigger assembly. What might this be? Thanks
It is normal that the spring guide is not coming out if you don't disassemble the trigger unit first. Novritsch trigger unit has a fixed spring guide stopper which is keeping the spring guide in its place.
@@GaijinAirsoft Thank you for your reply. In the Nov video on his site (Academy SSG10 Spring Guide Change @ 4:27) it show when he racks back the bolt the spring guide comes out. Mine does not do that. He does not have to do anything with the trigger assembly. Mine will not rack and the spring guide will not release.
@@leefreedman2043 Did you try racking it harder then normal? I had the same problem at first, I couldn’t get the spring guide out by normally racking it, but after pulling it with more force it came right out.
i had some air leaks woth airspft pro piston i believe novritsch piston works very well. some people say that scorpion piston is great but i am not really sure how much the piston can make difference. try and if you notice any, let me also know 😊
I got new SSG 10 A3 and your videos will help me in future repairs since I have little experience. Keep it up this is good and pleasant to watch.
thanks man, only trying to share my experience, glad to hear that it helps fellow players 😊
Thank you. Brilliant video you answered the questions I was asking everybody and yet you are the only person I have seen to address these issues! You deserve more followers.
Just had the sping problem, have game tomorrow, so i needed to fix it instantly.....so, i have bent the first spiral, since it broke flush, in a hoock shape, it was almost like factory, hooked it up again and works flawless....so far.
Thank you!
=))))
Hey thanks bro. I was able to fix my ssg10 wit ur help. My extension spring snapped just like u mentioned
it tends to do that 😂 glad i was able to help 🤜🏼🤛🏼
@@GaijinAirsoft Is there anything to remedy this weakness? I have had it brake 2 times already!
The moment I saw you weren't just telling us to buy a new trigger, i clicked subscribe. This is a what a fix is!
🤘🏻
Love your explaination pal..
😁
Good video 👍
Thanks 👍
Anyone had a problem with the sear not being straight? Its like bend to the stopper
weird, is it working as it should be and not having air leakage?
novritch diameter of the piston goes to all cylinder vsr10 ? i have a mapple leaf cylinder and wanting to know that.
if not wich piston has a removable piston end to change it to 45 - 90 dégré ? does the PDI Hard do that ?
you gotta give it a try and see if there is any air leakage... its a test trial dude...
My m82 same. The c02 12g Cap doesnt fit with the piston cause then it cant be closed
never tried a gas eifle yet...
I have TM L96 with full internal parts from Action Army. In my case, when I pull the bolt, piston doesn't get caught for like 3 out of 10 times. So it seems like I need sorbo pad, but I can't find one. All I can find is pads for VSR platforms. Do u have any advice? Maybe I should make one by my own?
Honestly, you can basically buy some o rings or the plastic rings that plumbers use and make your own, its very easy. But the VSR 10 ones might also fit, why dont you give it a try?
Thanks for the solutions :)
very welcome, let me know lf you have better ones 😊
Hello, just asking if anyone has an idea on how should i approach my problem with replacing the spring of my Lancer Tactical m40g, when i tried on the new spring when I cock the bold and try to push it back into place it just flies back and fires the gun. I wonder if it has to do with the new spring being an inch longer than the older one
I had this problem with my ssg10. I used a piston from my vsr10 and it was functional for a little while. Then it wouldn’t rack back and it kept firing without me touching the trigger.after I realized the problem I switch the the ssg10 piston and yes it was able to rack and shoot. The problem was that it doesn’t seem to put enough power behind the bb like the vsr10 piston I don’t know if I need to replace the ssg10 piston. I was wondering what you would recommend me do or what the problem may be.
What do you mean by it wasn't seem to put enough power? did you have less joules with the Novritsch piston or was it just a feeling? if the piston head is not damaged, your problem does not sound like its caused by the piston. it might be maybe an air seal problem. i would recommend to disassemble the cylinder and put some silicone grease (not oil) to the piston head threads and then screw it back again. then try to check is you have a good air seal. let me know afterwards and we take it from there together =)
@@GaijinAirsoft It isn’t so much a problem of power but more of a fact that the bb does not seem to have as much range. Even with the hopup set to full hop it doesn’t rise ,just drops.now if I am using the piston used in the vsr10 it takes the hopup adjustment and can hit those far distance shots. And now that the hopup from the vsr 10 isn’t functional in my ssg10 I have to resort to the ssg10 piston which doesn’t give me maximum performance. But I will see how your idea works out. Thanks for the response.
@@Hunttraditional Interesting. How do the weights of the 2 pistons compared? My guess is that the Novritsch one will be lighter?
Can you help me? The spring guide will not come our of the cylinder when the piston and spring are removed. The bolt will not catch when it's racked back. The only way to removed the spring guide is to remove the trigger assembly. What might this be? Thanks
It is normal that the spring guide is not coming out if you don't disassemble the trigger unit first. Novritsch trigger unit has a fixed spring guide stopper which is keeping the spring guide in its place.
@@GaijinAirsoft Thank you for your reply. In the Nov video on his site (Academy SSG10 Spring Guide Change @ 4:27) it show when he racks back the bolt the spring guide comes out. Mine does not do that. He does not have to do anything with the trigger assembly. Mine will not rack and the spring guide will not release.
@@leefreedman2043 Did you try racking it harder then normal? I had the same problem at first, I couldn’t get the spring guide out by normally racking it, but after pulling it with more force it came right out.
My piston sear spring broke, so I bought the SSg10 spare screws+ springs. I was wondering if that kit has the correct spring to solve the issue.
do you have SSG10? if yes, the kit should have the same spring
@Gaijin Airsoft yea, I have the SSg10.
Edit, did the same spring break on yours?
The spring in my trigger box broke on my SSg10 and it slam fires now,
you can buy a sprong set in amazon and change it, or Novritsch also sells spare springs on his website but not sure if its worth the money 😊
IS IT WORK WITH AIRSOFTPRO PISTON, AND WHICH ONE IS BETTER BY YOUR OPINION?
i had some air leaks woth airspft pro piston i believe novritsch piston works very well. some people say that scorpion piston is great but i am not really sure how much the piston can make difference. try and if you notice any, let me also know 😊