Видео

Aksanınız çok tanıdık geliyor kulağıma. Teşekkürler video için.

The block won’t go all the way through the outer barrel, it just stops

Dear Friend, where can I get the hopup chamber for my upgrade

When you sand the cylinder.. Do you sand the inside of the hole also? I was trying to myself but it is kinda hard to do the inside because i cant get a good angle or get in there with sandpaper

Thanks for this!

Im not quite sure i understand.. What does the Hop block do? and how does it affect the rifle if you dont change the stock one

But if I replase the bucking how do i remove it from the action army chamber

Hello, I have a question if you know what can cause blocking of the cylinder when closing the bolt, when I tighten the spring it goes smoothly (the cylinder without the trigger installed does not block and does not rub) but after installing the trigger assembly I already have resistance when closing the cylinder, it is not as smooth as without trigger.?? replica is well mb4411

My tdc has been good for so long but all the sudden it will jam if hop it too high even though the bb isn’t even traveling far due to lack of hop

My tdc has been good for so long but all the sudden it will jam if hop it too high even though the bb isn’t even traveling far due to lack of hop

My ssg10 doesn’t shoot when hop is applied, I replaced the bucking with a new one and have no idea why it doesn’t fire.

Ah damn. Okay I realized im an idiot. Always fun

Expanding foam works great for filling the stock.

Great content, wondering why u not uploading video anymore...

Lmfao😂.... So take your flip up objective cap off drill a bunch of holes in it there you have it a honeycomb Style flip up cap... I've done this to every objective cap that I own on all my scopes

Whu do they put that giant wheel on the paralax?

amazing ingenuity brother! love to see it

Hello, how are you, I have a question, is the vsr m160 spring compatible for a1 ssg10, thanks in advance

Thank you. Brilliant video you answered the questions I was asking everybody and yet you are the only person I have seen to address these issues! You deserve more followers.

Awesome idea! This was a great idea you came up with! Love it!

I like it yes. Perfect. Clean. Simple. Great explanation 👍💪🙏

Perfect video! Going to try these upgrades myself. Good job

Good video 👍

I have my bar10 from 2007. It has seen so many many fights but never upgraded it...

Does anybody know if the sorbopad mod reduces fps/joule number?

I hope this video helps people realize that airsoft sniping is not really sniping 😅 Wind is often the excuse used to justify the rifle’s variance but in truth, the gun itself has it’s own intrinsic variance as this is airsoft 😅 Thank you for such a video and we need more of this to help dispel all the delusion there is out there

Excellent tips😊 Thanks

Best vides/tutorials about mods. Appreciated

Great video. Appreciated:) I would love to have some insight into the differences between the stock and the AA chamber concerning the TDC 2.0 mod...Is the AA worth it? As I can see, there are 2 different versions for the stock and the AA chamber... Gaijin you mentioned that the stock is just fine, but is there any comparison or at least some opinions of those 2 different chambers with the TDC 2.0 mod.

Just received my ssg10 and the bolt pull was not up to spec. Outperformed by a $100 CYMA L96 in terms of bolt pull with same spring. My ssg10 has a really scratchy bolt pull, and halfway through the pull it does this grinding sound and gets almost stuck. I checked for obstructions to no but it was clear. I sanded the cylinder a bit but it didn’t make a difference. I’m buying some file tools to try to sand down the trigger stop nub like you did. I really hope it works.

i have the same hop up but other barrel and bucking but i run in to problems can you help me

Good job sir. Thanks❤

Cool shirt

Hello there! I just finished doing what you recommend in the video. The plastic sleeve seems to do a nice job, but there is one problem. When I cock the gun, if I don't keep the cylinder perfectly straight while pulling, it feels like it's scratching really ugly on the spring guide stopper. In other words, if the cylinder touches the spring guide stopper while racking the gun, it feels like grinding 2 pieces of metal, even though I sanded them a lot. Would you have any advice? Thank you!

Really helpful information if you are building your own VSR-10. The info on the AA Trigger is really important. My build I had to additionally do this: #1 File down the trigger guard to just below the top edge of the nub sticking out (if it was nott clear from the video) #2 Use the included grub screw from the AA Trigger kit to hold the Spring Guide Stopper if it won't hold itself in by pressure alone (e.g. AA Trigger in SSG-10 stays in without the grub screw but my JG Bar 10 needs the grub screw in). I don't know why but that is how you "fix" it if it falls out while you are testing it during installation.

Very helpful video series if you are upgrading a JG-BAR10. In general: if you are going to get one of these you are going to have to do a lot of upgrades from the start since it is a POS out of the box. If you want something usable while you gradually upgrade it, I would get a TM G-Spec or a SSG-10; much better quality parts and compatibility with upgrades. If you are comfortable building stuff just build your VSR-10 from scratch since you are going to replace almost everything anyway. I have gone both routes and would build it myself now if I wanted a new one.

novritch diameter of the piston goes to all cylinder vsr10 ? i have a mapple leaf cylinder and wanting to know that. if not wich piston has a removable piston end to change it to 45 - 90 dégré ? does the PDI Hard do that ?

So I have this same airsoft rifle however it was bought used a few years ago. I tried it out recently for the first time and it didn't shoot. Nor does it feed bbs into the actual gun. Do you know any potential ways I can fix it?

Hope you are well. Will you continue to make videos?

Where did you go bro 😢

What happened 😢

Did you need to drill the end cap to fit the crazy jet barrel properly?

You are a saint, I was so lost. Thanks boss!!

Very helpful review and installation instructions. Definitely helped me to install mine. SSG10 (purchased May2023) - upgraded with Tridos 2.0 Pro + Scorpion weighted piston (no air brake or sorbo) + Maple Leaf Decepticon 70 bucking (warm climate). It is laser accurate now and the adjustment with the Tridos fixed all the hop up adjustments and accidental "changes" with the stock set up. The only "issue " I had was using the "drill guide": the hole is not aligned correctly so you will need to drill a larger hole. The Pro version stuff covers the larger hole so nothing to worry about. Highly recommended for your SSG10.

Great upgrades! I wanna try it soon! How about a review and reaction of how it shoots now?

Hey that's a nice series of vids you've done here. I'm debating building one of these myself. What would you say the effective range is of your modified gun? What fps is it running at with .20? Will the electronic trigger allow it to only shoot in semi only, as a dmr in the UK required this. Many thanks richie.

thank you so much for this video! do you know if this conversion will also work with the CXP UK captain series?

Just had the sping problem, have game tomorrow, so i needed to fix it instantly.....so, i have bent the first spiral, since it broke flush, in a hoock shape, it was almost like factory, hooked it up again and works flawless....so far. Thank you!

recently got the jg bar 10 and I just ordered upgrade parts for it. Some of the best/most recommended parts are either unavaible in my country, will take a month to ship or are simply too expensive for my liking. F.ex crazy jet barrel 6,04 is almost 80eu and will take a month to ship, so I figured instead I'll get an action army 6,03 instantly and for half the price . AA zero trigger only comes with the piston combo, but the price is ridiculous ~160eu.. so I got the maple leaf zero trigger 90 eco version for 60eu and piston seperately for 40eu. Got the autobot hop up bucking 70 degrees for cheap and a cheap AA m170 spring. Got the AA hop up chamber and spring guide. All in all, the initial cost, incl. the rifle, would've been ~425eu and I brought it down to ~315eu and will (hopefully) still get a decent build. Also first time ever attempting to build an ASG, so idk what I'm doing and if this will actually work Edit: typos duh

Came for the TDC installation, but I feel like your other videos are super super worthwhile. Thank you.