thnx for sharing all your knowledge dude! Question: Does the maple leaf 6.04 crazy jet, its more accurate than the stock ssg10 6.01 barrel? (both using tdc). Greetings from Chile!
hi dude, honestly speaking, they are all good, from my perspective, the best accuracy comes from the inner barrel - hopup rubber combination. so, a maple leaf inner barrel (or crazy jet) with maple leaf autobot is a perfect fit. that is more important then buying the best expensive barrel. this is only my opinion 😊
not at all, you take the old one out and put the new one in. 1 to 1 match. the only recommendation from me is to get the Maple Leaf hop up block which sits much better in the Maple Leaf stock than novritsch block.
@@GaijinAirsoft great.. im consider buying the Maple leaf MLC338 and I also like short twisted outer barrel.. and thats the look that i'm looking for in a sniper rifle like yours... i have an AAC T10 and Modify MOD24 sniper rifles.. and both are in short twisted outer barrels with edgi internals.. now i saw that its possible to have a short outer barrel for the MLC338.. i might be buying the gun soon...
Let me add actually, you can even order SSG10 with this barrel on A1 or A2. So if you want to be 100% sure, you can also check Novritsch's website 😊 but as you can see in the video, it fits perfectly 😊
@@GaijinAirsoft unfortunately i'm based here in the philippines.. and novritsch does not ship here.. very nice videos btw.. keep on making videos for airsoft bro.. thank you for sharing your builds and tips.. we are learning a lot..
hey mate, they always chabge the "brand", here is what i found in amazon: Winer Outdoor Tactical Hunting M-LOK Bicone 6-8 Inch Hunting Shooting V9 Split Bamboo Scaffolding Holder amzn.eu/d/dZxLyCZ they also have some in begadi.de greetings from Austria 🤜🏼🤛🏼
Did you consider the Scorpion Piston to make more quiet? I am seeing a lot people on online talking about it but I am new to this all and trying to figure out how to get a large noise reduction.
i am not sure if the piston will help with the sound since the sound comes from the piston hitting the cylinder head and the spring. so using a heavier piston will maybe reduce the sound just a little since the hitting will be a bit alower, but that would mean that you lose power and you need to adjust your spring with a more powerful ones or with FPS rings in order to get back to the same FPS/Joule level. which then means again more sound 😊 of course this is in theory, i didnt test it and i am not sure if i want ro spend that much of money on the piston. if you really want to have a quiet sniper, i honestly believe that HPA conversion is the way to go... which is even mire expensive...
@@GaijinAirsoft I was actually going to ask you the same thing. The channel Fox Green did a real nice tutorial on the install with his SSG10, it’s adjustability and it’s performance in terms of sound at different levels and distances and it did seem to reduce sound level noticeably and appears to be a good purchase tho a bit pricey. It’s on my bucket list. It’s tunability with different available configurations in terms of length and weight really seems to add to your ability to fine tune for specific performance you are trying to get.
the sound comes from the spring and piston hitting the cylinder head, you cant reduce it that much, no matter what... if you want a silent sniper, my advice would be to move to HPA. that is quiet! 😊
hi dude, i was able to test very shortly on the field today (we had to stop due to heavy rain). in order to give you a proper answer, i need more time and proper testing. thanks to corona, i was not able until now... I will get back to you. and hopefully with a video, just need the time and proper weather...
Hi mate, I have finished the smooth bolt pull modification video first. I will try to have the TDC 2.0 Review in the upcoming weeks. Keep on following =)
it is not, Novritsch is using a brass unbranded maple leaf barrel which is not too bad and which works very well with Autobot bucking. I would definetly recommend TDC though!
I am using the stock one that came with it. I am also not sure if any barrel spacer would make any difference aince one end of the barrel is in the hop up chamber and the other end is in the cap. barrel spacer is in between just for a bit support drom my perspective and nothing else 😊
Hello, how are you, I have a question, is the vsr m160 spring compatible for a1 ssg10, thanks in advance
thnx for sharing all your knowledge dude!
Question: Does the maple leaf 6.04 crazy jet, its more accurate than the stock ssg10 6.01 barrel? (both using tdc).
Greetings from Chile!
hi dude, honestly speaking, they are all good, from my perspective, the best accuracy comes from the inner barrel - hopup rubber combination. so, a maple leaf inner barrel (or crazy jet) with maple leaf autobot is a perfect fit. that is more important then buying the best expensive barrel. this is only my opinion 😊
Hey, no further mods needed to exchange the A1 stock to the maple leaf? Thanks.
not at all, you take the old one out and put the new one in. 1 to 1 match. the only recommendation from me is to get the Maple Leaf hop up block which sits much better in the Maple Leaf stock than novritsch block.
hi bro.. so that action army spiral/twisted outer barrel fits the SSG10 without modification?
Yup, no mods needed 😊
@@GaijinAirsoft great.. im consider buying the Maple leaf MLC338 and I also like short twisted outer barrel.. and thats the look that i'm looking for in a sniper rifle like yours... i have an AAC T10 and Modify MOD24 sniper rifles.. and both are in short twisted outer barrels with edgi internals.. now i saw that its possible to have a short outer barrel for the MLC338.. i might be buying the gun soon...
Let me add actually, you can even order SSG10 with this barrel on A1 or A2. So if you want to be 100% sure, you can also check Novritsch's website 😊 but as you can see in the video, it fits perfectly 😊
@@GaijinAirsoft unfortunately i'm based here in the philippines.. and novritsch does not ship here.. very nice videos btw.. keep on making videos for airsoft bro.. thank you for sharing your builds and tips.. we are learning a lot..
I spent enough money for everyone, if I can save couple of innocent souls, i ll be glad 😂😂😂 let me know if your build goes well 😊
Hello from France, do you have a link for the Bi-pods: Armiyo Modular M-Lok in tan. Thank you very much.
hey mate, they always chabge the "brand", here is what i found in amazon:
Winer Outdoor Tactical Hunting M-LOK Bicone 6-8 Inch Hunting Shooting V9 Split Bamboo Scaffolding Holder amzn.eu/d/dZxLyCZ
they also have some in begadi.de
greetings from Austria 🤜🏼🤛🏼
btw, they are always in black, i painted mine 😊
Did you consider the Scorpion Piston to make more quiet? I am seeing a lot people on online talking about it but I am new to this all and trying to figure out how to get a large noise reduction.
i am not sure if the piston will help with the sound since the sound comes from the piston hitting the cylinder head and the spring. so using a heavier piston will maybe reduce the sound just a little since the hitting will be a bit alower, but that would mean that you lose power and you need to adjust your spring with a more powerful ones or with FPS rings in order to get back to the same FPS/Joule level. which then means again more sound 😊 of course this is in theory, i didnt test it and i am not sure if i want ro spend that much of money on the piston.
if you really want to have a quiet sniper, i honestly believe that HPA conversion is the way to go... which is even mire expensive...
@@GaijinAirsoft I was actually going to ask you the same thing. The channel Fox Green did a real nice tutorial on the install with his SSG10, it’s adjustability and it’s performance in terms of sound at different levels and distances and it did seem to reduce sound level noticeably and appears to be a good purchase tho a bit pricey. It’s on my bucket list. It’s tunability with different available configurations in terms of length and weight really seems to add to your ability to fine tune for specific performance you are trying to get.
the sound comes from the spring and piston hitting the cylinder head, you cant reduce it that much, no matter what... if you want a silent sniper, my advice would be to move to HPA. that is quiet! 😊
hi friend, tell me how did the short barrel tests go? how is the accuracy, accuracy and repeatability of the shot?
hi dude, i was able to test very shortly on the field today (we had to stop due to heavy rain). in order to give you a proper answer, i need more time and proper testing. thanks to corona, i was not able until now... I will get back to you. and hopefully with a video, just need the time and proper weather...
Thanks! very informative!
Glad it was helpful! =)
Looking forward to the TDC video 👍
Hi mate, I have finished the smooth bolt pull modification video first. I will try to have the TDC 2.0 Review in the upcoming weeks. Keep on following =)
@@GaijinAirsoft I shall keep following 👍 and will check the new video in the meantime.
@@Frisey TDC video has been published =)
@@keremuzgoren I saw, cheers bud 👍
Hi! Is it really necessary to change the inner barrel ?
it is not, Novritsch is using a brass unbranded maple leaf barrel which is not too bad and which works very well with Autobot bucking. I would definetly recommend TDC though!
what barrel spacer do you use?
I am using the stock one that came with it. I am also not sure if any barrel spacer would make any difference aince one end of the barrel is in the hop up chamber and the other end is in the cap. barrel spacer is in between just for a bit support drom my perspective and nothing else 😊
Ah damn. Okay I realized im an idiot. Always fun
Hi bro, a link for your magazine please.
Hi Mate, I am using standard Novritsch mags: eu.novritsch.com/product/ssg10-magazine/
The trigger 90 degree?
Yes, it is, stock trigger and piston are 90 degrees