Don't buy just any TDC before you watch this! (SSG10/VSR10)
HTML-код
- Опубликовано: 27 июл 2024
- Hello everyone. This time, I will be sharing my experience on how TDC mods function, talking about the differences (pros/cons) compared to standard hop up adjustment, looking at the TDC types that are on the market and finally, showing you how I installed the the Tridos Design TDC 2.0 Pro on my SSG10 (VSR10 and clones). Hope you enjoy it!
Links
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Tridos TDC 2.0:
tridos.design/collections/tdc...
Video Chapters
---------------------------------------------------------------------------------------------------------------------------------------------------------------
00:00 - Introduction
00:59 - What is TDC and why we need it
01:33 - Standard Hop-Up vs TDC comparison
03:28 - Types of TDCs on the market
06:07 - Tridos TDC 2.0 Pro
07:22 - Tridos TDC 2.0 Pro box contents
08:43 - TDC 2.0 Pro Installation: Hop-Up chamber
14:05 - TDC 2.0 Pro Installation: Drilling outer barrel
18:12 - TDC 2.0 Pro Installation: Housing
19:02 - Final Review
Social Media
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Facebook : / gaijin.airsoft
Instagram : / gaijin_airsoft
Music
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Epidemic Sound (on behalf of Epidemic Sound); Epidemic Sound Publishing
www.epidemicsound.com/referra...
#airsoft #ssg10 #sniper 
Игры
Very helpful review and installation instructions. Definitely helped me to install mine.
SSG10 (purchased May2023) - upgraded with Tridos 2.0 Pro + Scorpion weighted piston (no air brake or sorbo) + Maple Leaf Decepticon 70 bucking (warm climate). It is laser accurate now and the adjustment with the Tridos fixed all the hop up adjustments and accidental "changes" with the stock set up. The only "issue " I had was using the "drill guide": the hole is not aligned correctly so you will need to drill a larger hole. The Pro version stuff covers the larger hole so nothing to worry about. Highly recommended for your SSG10.
hell yeah! =)
Great review and process documentation!!! Just got my SSG10 a few months back and as soon as these are back in stock I will get one. I wondered about installation and you took all the wonder out. Thanks so much for posting. Looking forward to the other vids on this. Thanks again for such a great tutorial! 👍👍👍
i am very glad that they support you 😁
Thank you for this illustration video. It is by far the most detailed video on the topic and you illustrated it beautifully. If not for your video I would have struggled with this installation.
🤜🏼🤛🏼
great video thankyou , just ordered the TDC Pro and the crazy jet 300mm barrel and a few other bits I didn't know existed. thanks again great video
👍🏼
Just bought my tdc pro 2.0 today... thanks so much for uploading this haha
Hi mate, have fun with your upgrade, you will like it! =)
How do you like it? Is it worth the upgrade?
Very nice Video, never new about the tridos Tdc but as soon as it is aviable again i will get one my selfe :D. Keep up the great work i just love the way you tune this gun. Regards form Germany.
Hey mate, thank you very much for the nice comment! Servaaas 😁
thank you man!!! great video! doin the lords work out here !
🤜🏼🤛🏼
You are a saint, I was so lost. Thanks boss!!
you are very welcome my fellow shooter =)
"and so on and sofort", der hat mich offguard erwischt😂gutes video
🤣🤣🤣
Great video. Appreciated:)
I would love to have some insight into the differences between the stock and the AA chamber concerning the TDC 2.0 mod...Is the AA worth it? As I can see, there are 2 different versions for the stock and the AA chamber... Gaijin you mentioned that the stock is just fine, but is there any comparison or at least some opinions of those 2 different chambers with the TDC 2.0 mod.
sorry for the late reply, wasnt checking the channel for a long time =/ So the whole idea of the TDC is a straight pressure on the bb without any angle to give "precise" hop. AA is like an ADC where A stands for angled. it is not bad, but not exactly what you really want to have. if you buy the TDC from Tridos (which is my favourite until now), they have 2 versions, 1 for the stock chamber and another to change the AA into TDC. so no matter what, you will have to buy the TDC, therefore, i would suggest not to spend money on AA chamber and on top of that the TDC but leave the stock chamber as it is and just get the TDC and you are done =)
Hi Gaijin. Very nice videos with every details! I'm very interested in the TDC 2.0 but also confused that should i keep using the TM vsr10 stock hop up or upgrade to AAC hop up first?
i think they are making a version also for TM, check their website first, if they have the TM version, you dont need to change the hop up unit. if not, then you need to get the AA hop up unit and the TDC for that 🤘🏻
@@GaijinAirsoft they do have a TM stock hop up version. Is AAC hop up unit is better than the original one?
if you have the money, just buy the aac chamber. AAC chamber, trido tdc, open windowed barrel and modify xrange bucking = profit
just something to be aware off if you are using the mars top and side picatinny rail you will have to cut off most of the very forward part of the rail, as the TDC adjustment wheel is on top of the barrel , or use the short standard rail the gun comes with.
hi man, thanks for the info. I actually changed to SSG for less heavier gun and more tactical look. i will make a video on it and you ll see that it has a smiliar problem too 😊
@@GaijinAirsoft I have not received my TDC yet think it might be lost in the post , but as I have the mars top rail I can see there is quite a bit of metal on the top rail and am thinking it may be possible to cut a recess for the TDC to adjust the wheel either side of the mars rail.
Thanks man, I was looking around for this answer. ty
My SSG10 has stock chamber now but shoots straight as a laser. I had problems with curving bbs for a long time but its gone now. If I do get the TDC, I am afraid I will end up getting curved bbs again, now that I have great accuracy.
if you have a distamce that is enough for you and a great accuracy, then sure, dont touch it 😁 but if i were you, i would try to figure out why you had the curved bbs at first, maybe that will give you more confidence for further touches 😊
What is your thoughts on the TDC 2.0 for action army hop up chamber ? Btw very nice videos mate ! Regards from Denmark 🇩🇰
Hi mate, TDC 2.0 for the AA is Tridos' latest design with exactly the same principle and air tightness since its developed especially for that chamber. So you wont have any probs. 😁
@@GaijinAirsoft nice . Can’t wait to get mine tridos tdc :) and keep up the good work with the videos .
@@eenig8730 did you install it?
@@anomalyp8584 yes i did.
@@eenig8730 was it really easy lol
nice video my friend, what inner barrel are you using?
this setup has crazy jet with ML autobot bucking, very good combination 😁
@@GaijinAirsoft Thank you so much more fast answering :) Love your videos man very imformativ for a sniper starter like me. Keep up the great work
@@GaijinAirsoft Im not sure if i should stay with the standart 6.01 barrel or get a bit wider like 6.03 or more. I did so far all the mods to get my ssg much more quieter and now i wanna go on range and accuarcy. I orderd the TDC Mod so far and will try some other barrels in the future....god my wife gonna kill me :D
May I ask why did you choose to use the dark grey nub and why do you think it is the best one among the 3? Thank you
i honestly think that it fit the hole better, no other reason 😊
Hey can i ask you something....is there a diffrent between the long or short crazy jet Barrel? And which one do you prefer?
it has some FPS difference that you can adjust with changing the spring or using FPS adjustment rings. I prefer the short one since i like being fast and moving quickly. disadvantage is not having the tip of the rifle out when you are hiding in bushes etc. 😊
@@GaijinAirsoft Thanks😄
Hello! Is any TDC available for APM40D rifel??? Best video on TDC
i am not really sure... you can definetly do a custom one with some tweaks but premade one, not sure...
Hey, what that mount which is holding barrel? I cant find anythink like this for dremel.
its actually the workbench for dremmel (its the same brand) and on top of it i got a clamp to hold the barrel. links are below (i couldnt fint the exact clamp i bought, but it something lile below)
Dremel 26150220JB Dremel Workstation (220), 26150220JB www.amazon.de/dp/B0012RQG94/ref=cm_sw_r_apan_glt_i_X13YP06WCT6R1K67F7BC
Machine Vice 150 mm, Workshop Drilling Machine Vice www.amazon.de/dp/B07L17ZKYW/ref=cm_sw_r_apan_glt_i_WT400WPX3ED769E33BEH?_encoding=UTF8&psc=1
@@GaijinAirsoft Nice, thank you
Did you have any issues with the nub not sliding back up when adding less hop?
that happens always, you need to shoot couple of rounds and it gets back to its place, at least it does for me 😊
@@GaijinAirsoft which nub did you use?
Can you do an update about testing the set-up? Thanks!
I will, unfortunetly i am on summer holidays, i will only be able to do it at the end of August.
@@GaijinAirsoft Still waiting :p
Cool shirt
thanks man =)
tdc for ssg24 can fit for ssg10?
no, the placements of the rings and arms are different as far as i know...
Will this work with maple leaf 338 MCL Sniper
it depends on your Hop-Up chamber. Tridos design has couple versions for different chambers, worst case you can buy AA hop up chamber and the version for it.
you can do TDC to almost any sniper but you have to do custom modifications since the hop up unit, the hop up arm is different from the premade ones