Just wanted to say that I learned how to power wheelie on my mt09 watching this video. Took me about 2 months but since I was commuting it was a lot easier to practise everyday. Baby steps is key and remember to lean back!
Trouble with power wheelies on the MT-07 is it feels like you have no control, they feel sketchy af compared to clutch ups lol since I learned clutch ups I hate doing power wheelies.
I used to wheelie the absolute F outta my old XR 200 dirtbike after school every day, I'd just clutchless upshift all the way to 6th lol. Can't wait to get the mt10 after 5 years with my 07 600RR. It's time.
I practiced on the '04 FZ6 yesterday, it loves to wheelie. But the one you're on... that is such a torque king! I love it! You have one of the funnest and badass wheelie bikes made. And that sound...🐒🏍👌 it sounds like a built hot rod. Blessings to you hoolie
You absolutely ride the piss out that MT10, you got that bike figured out. Im gonna start a playlist with me learning to wheelie my MT10. Thanks for all the tips👍🏻
Everyone keeps telling me clutch ups are safer than power wheelies. I think that is not true. I feel I will loop a clutch up over a power wheelie. I feel more comfortable and have more control of the initial point of when the bike comes up. I’ve tried a clutch up and it scared the crap out of me! 😄 I have a 2017 FZ-10 with a tune. Thing is a monster!
This is exactly how I taught myself also. I always hated trying to do clutch ups it was just one more thing to fuck up and I was never consistent with it. So I started doing 1st gear power wheelies slowly going higher as I got used to the feeling. I don’t have either of those bikes but mines a GSX-S 750 and the power band is pretty much the same as a mt-09. Good video!
@@aressimbamt0959 IDK what you're talking about they are literally almost exact, both around 60 pounds or torque and at about 9,500 RPM to 10,000. both have about the same horsepower also. When I ride mine then an MT-09 they feel almost identical so idk what you mean at all.
Very good tips man! I learned primarily in 1st gear bc my 2nd gears are weird in comparison to a 18’ mt which my buddy had. Learning the throttle when it’s so sensitive is what ultimately let me learn powers through out the rest of the first 3 gears. Clutch ups came easy right after. 😎
Way easier to clutch up 3rd or 4th on the fz10 especially if you don't have a quickshifter or smooth throttle control bc in lower gears it's a bit radical(snappy) I personally started on a 600rr never rode dirt bikes or anything, learned to wheelie 2nd gear clutch ups. To each their own but cover that rear brake
Fuck yeah man loved the advice, ive just been practicing power wheelies in second gear on my 09, 6k rpm and blip the throttle it comes right up, however i cant hold it that long lol i guess ill just keep sending it.
Cool video! Lots of really good tips. When you quickshift while in a wheelie are you doing anything with the throttle? Everytime I shift in wheelie the front drops down to the ground.
My bike doesn’t power wheelie this much especially not sitting close to the tank, has an ecu flash and nice pipe on it, not sure how yours power wheelies so easy
I have a Tuono and I still find it difficult to power wheelie as easy as that. Just stays on the ground and takes off like a rocket ship, even with al the traction and wheelie control off.
What ur saying is on ur particular bike, the power band is 9k rpm and that's when u twist the throttle for a power wheelie ? I've done it backwards on my zx9r and learned clutch ups but sold that and am getting a fz8. I haven't had much luck finding power band to do a power wheelie.
you still planning on making a MT10 wheelie tutorial video? i started getting them at the end of summer but i cant get it high enough. it terrifies me but my lil boy hands are ready.
@@VeryFastBoi lol dang, well if you see me out there ill either be on the zx6r in my pic or a new 2020 black mt10, my buddy i ride with has a white s1000rr with mad bomber graphics
Rider weight has a whole lot to do with it. Im 250 and i have to snatch the throttle in 1st to get the front wheel up. 2nd 3rd clutch ups on the mt10. My old tuono would power wheelie in 2nd.
TheMacki95 TheMacki95 I ride in whatever the fastest power mode is, I would heavily suggest getting an ecu tune. It’ll improve the throttle response and give you more power. I used Bauce racing for my ecu tune and haven’t had any problems, you just ship your ecu to them and it’s about 220$ I think
@@VeryFastBoi Get her dyno tuned with a good software. I used Woolich. It is night and day difference especially in daily riding. No more chugging off the line in traffic.
This is how I learned and in my experience with wheelies which is plentiful this is the safest way to do it without crashing, there is still a risk of that no matter what though
Hey what? If you don't wave at scooter bros, you're no better than Harley riders who think they're above everyone else because they have a big engine. More CC's doesn't make a boy a man bruv.
VeryFastBoi I wanna start riding but really the only thing holding me back is what’s the right bike to start on and my girl telling me she’s gonna leave me if I do lol
Lol you've never hit balance point, you are pretty good at power wheelies but that's easy with a bike that has that much power and a quickshifter. You really shouldn't be teaching people how to wheelie, I mean cmon "you should kinda be covering the rear brake a little bit" nah bro that rear brake is your life line when you do real wheelies.
What was first bike u learned to wheelie? Im thinking od buying piece of shit 125cc cross just for learning. I dont wanna crash mt09. Good, bad, waste of time? Cant wait for your video. Peace!!
e34_THC I learned how to wheelie on a 09 r6 but I wasn’t very good and couldn’t hold them very long. I think you can learn wheelies with out dumping the 09 you just gotta be patient, try standard mode in second gear and give it a tug and some gas should come right up, from there it’s all about steady improvement
hi i have a question I've ridden mt10 do you turn off traction control what setting do you use and power modes ?, as on a test ride i did i got a good wheelie going but then it slamed down hard, i'm used to wheelies on my fireblade and other bike's
@@xpman85 the warning label. I. Gonna be peeling mine off soon. Horribly placed, like slapping a "Do not touch" sticker right in the center of the Mona Lisa
david gray I just turn it all the way off, the reason being I’ve had it freak out on me and cut power modes wheelie and I couldn’t accelerate until I stopped
man you start a sentence and then start another sentence in mid sentence, thats a lot of sentencing and you have when i went to the market and found the yesterday on the balcony same protection trousers as me. All messing aside, nice bike and vid. thanks.
While wheeling MT10 I had to put an exhaust which makes less noise because without a catalyzer it makes so much noise on high RMP I had difficulties in proper focus.
TCS really only fucks with clutch ups in my experience, couldn't hurt to turn it off though. Power mode in A all day bro, it helps you to keep it up, just crack it if it starts to dip back down and it will usually pull back up, get ready to quickshift
Ride any of the modes that you feel comfortable with. I have an fz10 (so its 2017) and I keep it in A. A mode is the middle ground mapping. This may be a shock but I will say it loudly, NONE OF THE MODES CHANGE THE POWER. The different modes only change the throttle mapping. B mode or mode 1 is the easiest to wheelie in because it is the “snatchiest” throttle. At the 50% percent twist you are WOT. More aggressive mode means less twist to reach wide open throttle.
@@ajblack6473 hi man. I am having mt09 and on my bike throttle reaction is sharpest on mode A, little less sharp on Standard mode and very relaxed on mode B. This what I learned is that you can wheelie on any of those modes. But to keep the wheel up is the easiest on mode B. This is the mode to learn wheelie on my bike in my opinion 😊👍🏻
@@VeryFastBoi yeah i was running with it off a bit and i think i like it more, honestly couldnt tell much of a difference but i dont ride nearly as hard as you. im in the upper peninsula of michigan if you ever want to ride, im just guessing but it totally looks like you are in wisconsin
Turn the TC off or you won't be able to do clutch ups. Also until you get an ecu flash stick to B mode wheelies. Doing them in A mode or even standard is asking for trouble
"Start with first gear power-ups" he said, LMFAO.......... just no. I thought he was joking at first. Never start with first gear, it's way too snatchy for a beginner. Also, power-ups get outa of hand quickly. Second gear and practice clutch-ups. This guy is gonna make you wreck.
I love practicing with my little boi hand
Yo the shade against scooter bros, why? I'll wave at those dudes time and again before I wave at a Harley rider.
Me too! Harley riders seem to be too superior for other bikes that actually do more than make a lot of noise in a straight line 😂
Scooter bros don’t even know about the wave in my experience.
Just wanted to say that I learned how to power wheelie on my mt09 watching this video. Took me about 2 months but since I was commuting it was a lot easier to practise everyday. Baby steps is key and remember to lean back!
That's my favourite spot in Mexico, I go there to wheelie all the time 😉
Trouble with power wheelies on the MT-07 is it feels like you have no control, they feel sketchy af compared to clutch ups lol since I learned clutch ups I hate doing power wheelies.
Reevy I’ll have to get more seat time on an 07, haven’t wheelied one in a couple months
@@VeryFastBoi I'm jealous of your MT-10 mate, I just went to look at one in tech black and the dealer was like go on you know you want it 😂
Let Me Know if you guys want bike specific Wheelie tutorials.
I can do an Fz09 fz07 and a Yamaha r6 !
Hit me up if u need a cbr in the mix too....lol
Please do the FZ07. Appreciate it🙌🏻
The mt10 is good for me to learn , I've a ktm 990 so similar torque. I could see if it will.translate to tuono factory
I'd be down for an R6 vid, i'm tryna cop one of those when my ankle heals up lol.
linkinn cafe say less I’ll start figuring the videos out
I used to wheelie the absolute F outta my old XR 200 dirtbike after school every day, I'd just clutchless upshift all the way to 6th lol. Can't wait to get the mt10 after 5 years with my 07 600RR. It's time.
I practiced on the '04 FZ6 yesterday, it loves to wheelie. But the one you're on... that is such a torque king! I love it! You have one of the funnest and badass wheelie bikes made. And that sound...🐒🏍👌 it sounds like a built hot rod. Blessings to you hoolie
Ben since 80's liter bikes that I've ridden decent wheelies! All clutch up's on those old beasties. Patience is what you're preaching, so true!
You make it look easy. I have an old FZ1 with 5 valve engine, have to really rev it to power wheelie. Very scary.
Everybody talks about how to wheelie but nobody mentions that on the MT-09 TCS has to be set to atleast 1 or off completely do to proper wheelies.
You absolutely ride the piss out that MT10, you got that bike figured out. Im gonna start a playlist with me learning to wheelie my MT10. Thanks for all the tips👍🏻
Everyone keeps telling me clutch ups are safer than power wheelies. I think that is not true. I feel I will loop a clutch up over a power wheelie. I feel more comfortable and have more control of the initial point of when the bike comes up. I’ve tried a clutch up and it scared the crap out of me! 😄 I have a 2017 FZ-10 with a tune. Thing is a monster!
This is exactly how I taught myself also. I always hated trying to do clutch ups it was just one more thing to fuck up and I was never consistent with it. So I started doing 1st gear power wheelies slowly going higher as I got used to the feeling. I don’t have either of those bikes but mines a GSX-S 750 and the power band is pretty much the same as a mt-09. Good video!
power band is not even close in tourqe with mt09
@@aressimbamt0959 IDK what you're talking about they are literally almost exact, both around 60 pounds or torque and at about 9,500 RPM to 10,000. both have about the same horsepower also. When I ride mine then an MT-09 they feel almost identical so idk what you mean at all.
What TC and riding mode are you?
"We're in Mexico btw" 😂😂😂 Buddy has jokes.
Very good tips man! I learned primarily in 1st gear bc my 2nd gears are weird in comparison to a 18’ mt which my buddy had. Learning the throttle when it’s so sensitive is what ultimately let me learn powers through out the rest of the first 3 gears. Clutch ups came easy right after. 😎
Thanks, I just bought an MT-10 and this is helpful
Was waiting for this since I seen it was being uploaded, a little late but I’m here
Mine threw that front wheel up so fast yesterday I came down and landed on my nutsack.. pulled over and walked it off haha
Best wheelie tutorial yet
Way easier to clutch up 3rd or 4th on the fz10 especially if you don't have a quickshifter or smooth throttle control bc in lower gears it's a bit radical(snappy) I personally started on a 600rr never rode dirt bikes or anything, learned to wheelie 2nd gear clutch ups. To each their own but cover that rear brake
3rd gear clutch ups are the best
1 & 2 you can just crack the throttle and wheelie
What traction control setting and power mode are you doing these wheelies with?
"off"
Man one thing I know for sure. It doesn’t work with the sv650 unless you use the clutch and you twist that throttle as much as you can🎉
Fuck yeah man loved the advice, ive just been practicing power wheelies in second gear on my 09, 6k rpm and blip the throttle it comes right up, however i cant hold it that long lol i guess ill just keep sending it.
The Monster its Alive !!!
bros really teaching power wheelies without the break lmao most ur gonna wheelie for is 5 seconds until it redlines
Cool video! Lots of really good tips. When you quickshift while in a wheelie are you doing anything with the throttle? Everytime I shift in wheelie the front drops down to the ground.
You gotta give it more throttle when you shift, that will be my next video explaing the quickshifter and how to keep the front tire up
Very enjoyable video🤟
My bike doesn’t power wheelie this much especially not sitting close to the tank, has an ecu flash and nice pipe on it, not sure how yours power wheelies so easy
Thanks Fella ! Awesome tips ! 👌
what about the electronic settings? Traction control wheelie control modes....which are you in or you dont care?
Hi, what drive mode and traction control setup you use for power wheelie?
Nice video! I’m assuming you have lift control fully disabled?
He does
Don't forget to turn traction control off, mine won't do it with it on
I have a Tuono and I still find it difficult to power wheelie as easy as that. Just stays on the ground and takes off like a rocket ship, even with al the traction and wheelie control off.
Hi! And which driving mode did you show, power 1 or 2? And what was your traction mode?
What ur saying is on ur particular bike, the power band is 9k rpm and that's when u twist the throttle for a power wheelie ? I've done it backwards on my zx9r and learned clutch ups but sold that and am getting a fz8. I haven't had much luck finding power band to do a power wheelie.
I have a 19’ mt03 and im trying to learn about how to wheelie but all the vids i see have mt07’s and up
That’s cuz the 03 is slow, you can do it you just have to dump a lot of clutch and pull up really hard
you still planning on making a MT10 wheelie tutorial video? i started getting them at the end of summer but i cant get it high enough. it terrifies me but my lil boy hands are ready.
bro you sound like you are from wisconsin or somewhere in the midwest, come ride sometime ill be at road america this summer.
LOL I blew my motor at road america ill be back there this year
@@VeryFastBoi lol dang, well if you see me out there ill either be on the zx6r in my pic or a new 2020 black mt10, my buddy i ride with has a white s1000rr with mad bomber graphics
I have a 2023 MT-07 but does the ABS and it being A2 restricted stop me trying to wheelie?
What clutch/brake levers are on your bike? I like how they are short. Thanks
The stop sign didn’t say “ALTO” BRO, means STOP In Spanish for those who don’t know
I'm guessing it is easier to shift up with a quick shifter on the back wheel, not having to roll off the throttle 🤔
Yes I’ll make a video explaing how to wheelie wth a quickshifter
Were you in standard mode while making this video???
Great video
Rider weight has a whole lot to do with it. Im 250 and i have to snatch the throttle in 1st to get the front wheel up. 2nd 3rd clutch ups on the mt10. My old tuono would power wheelie in 2nd.
Thank you sir!
For the MT-09 do you need to turn off Traction control in order to make wheelies?
Yeah, turn off TCS and it’ll disable the ABS as well.
Do you drop your bike in a parking lot when practicing low speed wheelies?
If you wanna practice low speed wheelies you gotta get a grom or something because doing stunt type of wheelies it’s way easier to crash
which side mirrors do you have for the mt? looks nice!
Rhino moto bar ends with crg arrow mirror
What is your tcs and power mode
tcs fully off and i think a mode which ever one is the fastest
@@VeryFastBoi how can you off the tcs? The lowest on mine is 1
@@YamahaR-BMWSRRRider hold Tcs button up
Do those qualify as actual wheelies? Your front tire is like 2 ft off the ground. Not saying you gotta be at balance point but get close
Seriously tho, no skills, all squid.
i weigh like 90kg men i just crank open full first gear and wheel not even coming of the ground?i have normal position
Bike?
@@VeryFastBoi fz8 2011
finally mt10 vid how to wheelie it i see that you have tc off what riding mode did you use? a mode is litle bit crazy for the first time wheelies
For me ive noticed Standard mode is best as it comes up gradually
TheMacki95 TheMacki95 I ride in whatever the fastest power mode is, I would heavily suggest getting an ecu tune. It’ll improve the throttle response and give you more power.
I used Bauce racing for my ecu tune and haven’t had any problems, you just ship your ecu to them and it’s about 220$ I think
@@VeryFastBoi 450€ here
@@VeryFastBoi Get her dyno tuned with a good software. I used Woolich. It is night and day difference especially in daily riding. No more chugging off the line in traffic.
Hi. How are you? Is your speedo set in miles/h or kilometres/h? I'm assuming miles/hour, but I just like confirmation please.
mph
Bad advice.. Clutch wheelies are waaaay safer and easier to control..
To each their own
I don’t agree. Power ups are easier on the bike and easier to learn doing. Just cover the rear brake always.
Power wheelies are sketchy u don’t know how high it can come up especially in 1st gear! Try 2nd gear clutch up and hover the rear break
This is how I learned and in my experience with wheelies which is plentiful this is the safest way to do it without crashing, there is still a risk of that no matter what though
Do you turn off traction control?
how to wheelie mt10 ... just give a gas haha
what modes are you in for this >?
The fastest one with tcs off
Did you use Mode A, B or STD?
Hey what? If you don't wave at scooter bros, you're no better than Harley riders who think they're above everyone else because they have a big engine.
More CC's doesn't make a boy a man bruv.
I learnt he hard way not to cover my back brake.
Your not clutching up?
How long have you been riding for? And what was your first bike?
About 2 year started on a 09 r6 I’ve been doing motocross since I was 5 tho
VeryFastBoi I wanna start riding but really the only thing holding me back is what’s the right bike to start on and my girl telling me she’s gonna leave me if I do lol
Lol you've never hit balance point, you are pretty good at power wheelies but that's easy with a bike that has that much power and a quickshifter. You really shouldn't be teaching people how to wheelie, I mean cmon "you should kinda be covering the rear brake a little bit" nah bro that rear brake is your life line when you do real wheelies.
once you get that girl up to 5300k feet... clutch ups are the only way to get them to pop up
Does the 2018+ MT10 factory quick shifter come with auto blip down shift?
only quickshifter no auto blip downshift
What was first bike u learned to wheelie? Im thinking od buying piece of shit 125cc cross just for learning. I dont wanna crash mt09. Good, bad, waste of time? Cant wait for your video. Peace!!
e34_THC I learned how to wheelie on a 09 r6 but I wasn’t very good and couldn’t hold them very long. I think you can learn wheelies with out dumping the 09 you just gotta be patient, try standard mode in second gear and give it a tug and some gas should come right up, from there it’s all about steady improvement
Thanks! Great video, Great tips !!
hi i have a question I've ridden mt10 do you turn off traction control what setting do you use and power modes ?, as on a test ride i did i got a good wheelie going but then it slamed down hard, i'm used to wheelies on my fireblade and other bike's
Exploring with mark you hold up on the TCs button while not moving to turn it off completely, as for power modes I only ride in mode 1
@@VeryFastBoi thanks man, i appreciate the reply. i am torn between the mt09sp and the mt10 at the moment
Traction off?
Did you do something to the quick shifter? It seems smoother than my mt 10 sp
nope nothing i heard the 2018s have updated qs systems what year is your sp?
@@VeryFastBoi 2019 🤔
wish we had a mexico here in australia. farkin cops here - you wheelie and we catch u - ur farked.
What bothers me the most about this video ..is the sticker on the fuel tank ..
The MT symbol or the warning label?
@@xpman85 the warning label. I. Gonna be peeling mine off soon. Horribly placed, like slapping a "Do not touch" sticker right in the center of the Mona Lisa
Work on MT03?
do you keep traction control on level 1? I hear that it allows wheelies but helps prevent flipping the bike
david gray I just turn it all the way off, the reason being I’ve had it freak out on me and cut power modes wheelie and I couldn’t accelerate until I stopped
I tried a clutch up on my FZ-10 in TC1 and the rear tire broke loose and stuttered. I am just now learning to wheelie.
man you start a sentence and then start another sentence in mid sentence, thats a lot of sentencing and you have when i went to the market and found the yesterday on the balcony same protection trousers as me. All messing aside, nice bike and vid. thanks.
u got a quick shifter?
yuh
this is a video i shouldn't be watching. as i've been thinking about it already but shouldn't
While wheeling MT10 I had to put an exhaust which makes less noise because without a catalyzer it makes so much noise on high RMP I had difficulties in proper focus.
Do I need to put my MT09 in a specific mode? Or just take TCS off?
yeah as long as TCS is off you'll have enough power even in C mode
TCS really only fucks with clutch ups in my experience, couldn't hurt to turn it off though. Power mode in A all day bro, it helps you to keep it up, just crack it if it starts to dip back down and it will usually pull back up, get ready to quickshift
Is this the same with an MT 15?
no
What mode do you have your 10 in? I have mine in B mode and it feels super sketchy trying to feather the throttle when the front end comes up
Mode 1 the fast one I don’t ever ride in any other modes
@@VeryFastBoi mode 1 is the only mode :)
Ride any of the modes that you feel comfortable with. I have an fz10 (so its 2017) and I keep it in A. A mode is the middle ground mapping. This may be a shock but I will say it loudly, NONE OF THE MODES CHANGE THE POWER. The different modes only change the throttle mapping. B mode or mode 1 is the easiest to wheelie in because it is the “snatchiest” throttle. At the 50% percent twist you are WOT. More aggressive mode means less twist to reach wide open throttle.
@@ajblack6473 hi man. I am having mt09 and on my bike throttle reaction is sharpest on mode A, little less sharp on Standard mode and very relaxed on mode B. This what I learned is that you can wheelie on any of those modes. But to keep the wheel up is the easiest on mode B. This is the mode to learn wheelie on my bike in my opinion 😊👍🏻
@@voyteq1 hell ya bro! Find what works and stick to it. Keep that rubber side down and that front wheel up🤘🏼
What modes you running in? Just hit 650 miles on mine
I always run in mode 1 with tcs off for the most part
@@VeryFastBoi yeah i was running with it off a bit and i think i like it more, honestly couldnt tell much of a difference but i dont ride nearly as hard as you. im in the upper peninsula of michigan if you ever want to ride, im just guessing but it totally looks like you are in wisconsin
@@sosmotorcycles theres a possibility im in wisconsin lol
@@VeryFastBoi well shit lets ride sometime. I got a small group of people up here, since I just got the bike I’m taking like a week off to ride
Not to ruin it, but if you were in Mexico the stop sign wouldn’t say stop lol!
What’s a rear foot?
Hahahahah, I picked up on that too
You from Wisconsin?
Clean Machine Auto Detailing yes sir
you remind me of yammie noob 😅
I don’t like that one bit
What size of front and rear sprocket do you have ? ;)
Aron Grelich stock sprockets
It's a Mt 10 he doesn't need to switch sprockets
the Mt 09 /10 just wanna fly
2 wheels, is 2 wheels. Don't act like your better than them! that's straight up motorism. How would you like it if a Unicycle did that to you!?
Booooi, awesome video! I got an MT09 but I still haven't managed to raise the front end. I ride in A mode TC 1. Do you have specific settings?
I don’t have very much seat time on the 09 but when i wheelied it i was 2nd great power mode b/standard no Tcs
Turn the TC off or you won't be able to do clutch ups. Also until you get an ecu flash stick to B mode wheelies. Doing them in A mode or even standard is asking for trouble
What mirrors you running?
Crg arrow mirrors with rhino moto bar ends
VeryFastBoi thanks bro. Just picked up a 17 FZ-10 pretty stoked on it. Comes with a quick shifter too 👌🏼
Do a tutorial to wheelie an R125 lmao
mirrors from were?
Rhino moto bar ends crg arrow mirrors
@@VeryFastBoi thanks pal
Step 1: buy MT 10
You got Instagram?
Mt10jake
Wish your videos were in 4k 60fps
"Start with first gear power-ups" he said, LMFAO.......... just no. I thought he was joking at first. Never start with first gear, it's way too snatchy for a beginner. Also, power-ups get outa of hand quickly. Second gear and practice clutch-ups. This guy is gonna make you wreck.
I can’t even wheelie