Easy guide to Water not filling for Samsung Washing machine (Model: WA10J5730SS)
HTML-код
- Опубликовано: 29 сен 2024
- Only try after you have ensure that washing machine do not have brown gunk or algae at the water inlet connector area.
If from Singapore, you can buy from me at this link $30, just show subscribed to my channel (will give you $2 off) & support my channel- carousell.app....
Lazada affiliate link
1) [Singapore local seller] DC62-00266E Samsung water machine inlet valve ($28)
- c.lazada.sg/t/...
2) Quick release slip groove water pump plier, plumbing plier ($8.99)
-c.lazada.sg/t/...
Shopee affiliate link
[Local seller warranty] Samsung washing inlet valve DC62-00266E ($28)
shope.ee/603jX...
Cheaper Lazada affiliate link option
c.lazada.sg/t/... ($9.41)
Do continue to share the loves and help everyone💕
All the videos are my first time doing the project. I would share what I have experience and video record along the way. It might not be the correct way. Do give advise and I will keep learning and improve.💪💪
DO IT YOURSELF to save some money.
Relatively quick and easy despite it looking overwhelming
Remember to unplug power source when handling any machines
Disclaimer: I am not trained in any handyman or electrical work, please do it at your own risk.
Other Samsung Washing machine video (Drain Motor Issue) that you might be interested
• Drain Motor replacemen...
Hope my sharing save you some money💰💰💰 and provide you with some free knowledge. Like & subscribe my channel to support my small RUclips channel. 💕
I almost threw away my Samsung washing machine , thanks to this video that I learnt a simple fix with a $5 compatible Samsung water inlet valve from Taobao is able to solve the issue. Now my 3 year old Samsung Washing Machine is working again. Hope it lasts for another 5 years at least.
@@silverhawk911 Nice job, yes yes. My valve have been changed since 3 years ago and it is still working. I believe yours also can last for many more year 🥰.
Thank you for this video, great help!!
Works wonders. My washing machine is working again.. took only 10 mins to fix.. thank you so so much!
@@maoteh welcome 😊 nice job. Thank you for leaving us a comment and letting us know ur success💗
Thanks
But what may be the reason behind failure of Water Inlet Valve
Welcome. Hi, there are many reasons, mainly two reasons are
1) Solenoid in the water valve is damaged. Thus, not able to pull back the mechanism inside
2) It can also be the spring mechanism inside is damage.
It's 138am in the morning. We bought the part last minute online and managed to fix the washing machine by ourselves thanks to this video.
Nice job, thanks for sharing your success story 👍😊. Hope it save you money by diy
Mechanic says that your valve's motor is burnt out
Thank you so much and may God bless u.Saved us $$$ of buying a new ones.Mine is about 8 yrs..the part where need to take out the white and black part was challenging as it was tight Nevertherless managed to do it.spent abt 3 hrs but worth every cents if not have to pay $160 for repair
@@junaidahmohamedsaman7612 Welcome. Thank you for sharing your success story👍😊 Wow 8 years. Last time product does last so much longer. Hope it can last many more years😊
Just did mine thank you so much!!!
@@layno88 Welcome 😊 thank you for leaving a comment.
Thanks. Ur video was extremely helpful, I had fixed 4C by replacing water valve.
Welcome, Glad that it helped. Happy new year to you!! :)
Hey, just wanna say thanks for this! I just managed to get this rectified. Appreciated much!
Do press the subscribe button to help me build my small channel 🙏😊
Hi man. Thank you I was able to know what was the problem that the water didn't come out .
Glad, i could help you save some money. Do help me like and subscribe to support my tiny channel🥰
I swear to god. Ure the best!!!! U HELPED ME!! I dont have to pay the technician $400!!!
Nice👍! Glad that my video help. Do press "subscribe" button so that you can help me to reach my 1000 subscriber target 😊🙏
Metho le lende paise ❤️
Hi bro, thank you for the valve & easy to follow tutorial. You're a life saver! 👍✌️
Thank you for subscribing and supporting my small channel 🙏. Glad to share what I experience through my videos 😊
Thanks a lot mate. I managed to save couple of hundred dollars because of your video.
Welcome 😊. Nice job👍, Thank you dropping a comment too
If I can give u a kiss I would!!!! So tight on money and thought I would have to purchase a new washing machine 😅😅😅😅 part arrived today and the washing machine is working smoothly now 🎉🎉🎉🎉🎉 THANK YOU 🙏
@@raizelloveVery happy my video save your day 🥰👍. Let's hope for washing machine to last many more years❤️
Dli masudlan ug tubig ang. Washing.machine.
I cleaned my filter by opening it same way Water flow became great but after sometime the machine stop taking water. Sometimes it will take and then stop. Does it need valve change? I can't hear the machine sound it used to make while taking water
Hi, if the solenoid does not make any sound when take in water then changing the valve most probably will work. But there got a slight possibility that is the main board have issue not sending signal
hi my washing machine water inlet is working for the hand wash one but the powder dispenser one isn't working..., what might be the issue?? so I still need to change the inlet? this always happens after i descale the machine....
You can take a look at this RUclipsr video for descaling valve issue. I think he does a very detailed video. That might be able to help you. ruclips.net/video/esZ95CzWrfA/видео.htmlsi=Io064tGQPjpfVqmE
I already replace my water inlet but the problem not is it won’t stop filling water
@@MarJorieMamaril-s1i Hi, when you press stop button does the water stop? If it stops then might be your water pressure sensor that is faulty. Not very sure but that's what I will suspect if it happens to me.
Hi bro, with my washer the drain pump continuously runs non stop, can you help me 😢
@@motshehiramakatsa1724 Hi, Have no experience that on this machine yet but when you press stop does the drain pump stop? If not, likely the drain pump is spoilt.
Very useful information 👍
Hello po, paano niyo po natanggal yung mga connectors? Pull lang po ba or may need pisilin somewhere kasi sobrang higpit po nung triny ko sa AWM namin.. samsung din po gaya ng sa inyo.. thanks
Hello, I remember is only need to pull out the connector. You can use a nose piler to help you pull out if it is too hard. There is no clip holding the connector.
This video helped a lot....thanks for this...saved lot of money
I have a problem like this to my machine same machine
So basically need to buy a new set to change, am i right?
@@yennycoquin653 hi yes, need to buy a new solenoid valve to change. Do take note is not 100% success rate. Some did share can be circuit board issues too.
Got my washing machine fixed too, thank you.🙏
Thank you for sharing your success😊👍. Got Job on your DIY work❤️👍
Thank you for sharing this knowledge. God bless you more
Thank you for saving my day! It works 👍👍👍👍
Glad it helped! 😊👍. Thank you for leaving a comment
Thanks..! this video help me fix my washer its cost rm55. if call the technician... it's will cost me rm300.
Nice, your weclome. I didn't know malaysia also costs so how much to repair. Thank you for sharing.
Thank you Yang I managed to repair my washing machine
Nice 👍 Welcome to the DIY world. Happy to have help you, Do subscribe to support my small channel 🙏😊
Thanks boss,Ur video was extremely helpful
Your Welcome, Glad to be able to share what i tried successfully
Very misleading. You should always test the voltage to the solenoid before blindly ordinary a part. What if the controller was not sending voltage? You then just wasted money on a part that you don't need.
Thank you for the feedback. i would improve on it and include technical checks in the future.
Thanks buddy it's work u save my money 🤑 💖
Nice. Great job 👍
Good day! May i ask, if it is okay if the water supply is not strong because our water tank is by gravity only, but our washing is working. Tha
only thing is the water getting inside the washing machine is not strong.
Good day! From my understanding. I believe it will not affect your wash. As the machine have a pressure level sensor, it usually only start cycle when the water level in the tub has reached. It will top up water again once it is lower than the level.
Just had this problem yesterday and found your guide today. You’re THE MAN bro! Thank you so much
Nice, thank you bro for leaving a comment to let me know ur success👍👍😊
@@diyyangSG you’re welcome bro. Cracked solenoid casing. Replaced the whole module and the washing machine water issue is now solved. Cheers bro.
Thanks man. This video help me too. But the seller in the list ain't that trust worthy. I had to wait for him by his company without any unit numbers for like almost an hour while he have been saying 'im coming down now'
Wah, that's a long wait. Shall see who to change to. Glad that my video help you save money💰👍👍😊
Thank you for this video! Really a lifesaver.
Welcome, glad that my video can help. Thank you for leaving a kind comment too 😊🙏
You are a lifesaver!
Happy that it helped you 😊
When you faced this problem, can your machine still do spin cycle? Mine just stuck when no water come out. Cant even do spin cycle.
Hi, mine just hang there, mine didn't move on to spin cycle so I just tried to change valve after I check my water supply hose is not blocked
@@diyyangSGhi, i just changed the valve, still doesn’t work😭
@@hidayahrahman1365 ohno sorry to hear that, this sounds like it might be board issue
Hi guys, change water hose to the hot side , it’s working for me. I have WA13T5260BY Samsung washing code number machine ..❤❤
Can i manually put water
I haven't try before but I think it is possible if the error code for no water only appears after awhile
Not sure if it would be the same fix. Before, when there's no water coming in from the inlet valve I can hear sound when it should taking in water. Replacement solves it. I got the same issue again but now, I don't hear a sound. What do I need to check first? I already tried removing-putting back in but same issue.
Hi, first maybe you can check whether your water supply have any issues. Second, i will use a multimeter to check whether there are 240V sending to the solenoid valve. Because i hear before that there are chances the board could be the issue instead of the valve
Saan tayu mka bili?..
Pwede ba electronic ceter lang?
Njagada machine ithuvare upayogichittilla. Water very slow. Servicing vannappo avar paraunnath tank pokkan enkile force varunn. Plz replay
Sorry. Google is not able to translate to English. But you maybe can try this link for slow water (ruclips.net/video/XxTnjyUivDg/видео.html)
Where is the troubleshooting steps? So replacing the valve assembly in the ONLY thing that could have caused this issue?!! Not the overflow tube or the water level indicator or ANYTHING ELSE!???
Hi, I am not professional. Sorry that I am not able to help. I am just sharing what I have done. I have indicate in the description that it could also be the clogged inlet supply (ruclips.net/video/XxTnjyUivDg/видео.html). It could also be PCB issue which I have not met so not able to share. Hope more experienced people can share along the way to help everyone improve😊
I bought a brand new piece and still the same issues. Any help?? The code is reading water valve still! 😫😫
Hi sorry to hear that. it is not a good news, there is a possibility your main board is spoilt or the wire is damaged somewhere. If you have multimeter you can test if the wire connecting to the valve has voltage during each steps and test the resistance of the new water valve. Otherwise, it is still better to replace the new washer instead. As the cost of the board is quite high.
Hi bro, after I changed a new valve. Now the water inflow not stopping. When I turn on, water keeps flowing in until overflow. Wouldn’t stop. Any suggestion?
Hi, when you off the power during inflow does the water shut off? If I does mean the valve is doing ok. It might be the water level pressure sensor issue. As it is not sending signal to the brain to tell it to stop when the water level is reach
Hello, I changed it today. It was running for a while then. It's stopped again. No error code 😭
Hello. maybe you need to get multimeter to check whether there is incoming voltage to the inlet valve and test the resistance of the solenoid. Personally I have not done that before, but maybe you can search online based on that.
sir tanong ko lang po yung dual wash namin hndi po mag ikut hndi umaandar
Sir...samsung washingmachine user here...Water can refill but the washing machine keep draining after 5 minutes of refilling...then appear 4C...I cleaned the host for water..but i think thats not the issue....☹do you have any idea about that..what happened?Thank you sir..
Hi Sir, I seems like it is not supply issue. I might not have correct solution but It might be your drain motor or drain valve have issue. I have not faced this problem on Samsung but i suspect it might be your drain motor have some issue blockage blocking the rubber valve from closing. I have just uploaded a panasonic WM outlet video: ruclips.net/video/YzMgoruzDtc/видео.html
That video is the closet video that might help you where is on the WM drainage issue.
You're Amazing! 😊🤗
Hi there sir
Hope you well
I'm not sure if mine is a valve problem because when I rinse water comes and when I use the water jet also water comes the problem is when I wash no water coming out.
Please assist 🙏
Hi, it does not sound like a valve issue. I have not met this problem before so i am not sure too. Sorry could not help this time🙏
How much of this washing machine water inlet valve..??
Plz, give me some information about the water inlet valve nd its price...??
I m in big trouble...
Plz, help me with this information
@@afrozaane4810 At 2.42minutes is the description. Parts are also listed in the description.
Hi, sir! I would like to know where could i possibly buy the whole set of solenoid valve? Or at least a piece of solenoid valve?
Hi, you can try click and purchasing it from the links that is provided. If not, you can try to copy paste the parts description and search SAMSUNG WASHING MACHINE WATER INLET VALVE DC62-00266E in your area.
So the problem is washer water inlet intake sensor thats problem?? If i clean mine will it can be reused again?
Not 100 percent but most of time is this issue, you can try to clean the filter part to see is it due to clogged. There are times where dirt can stop the water from flowing too. You can see this video on another brand washing machine that have dirty filter ruclips.net/video/XxTnjyUivDg/видео.htmlsi=ho6FFi-ATCXqGuTf
@@diyyangSG oh, i dont think this is the problem.. i think the water inlet intake sensor in this video the problem.. mine totally no water coming into the washer.... I tried openings and have cleaned out the debris and still no water company into the washer..
Hello i have the same problem water is not filling the tub but in the area to hand wash clothes water is coming should i do the same procedure
Hi, I have not encountered this issue before. But it might be one of the solenoid in the valve that spoils. Thus, only hand wash has water coming out. If you are well trained, you might try to interchange wires of the valve (for my cases 3 wires)to test the machine again see whether is it one specific head valve that's spoil before buying a new inlet valve
@@diyyangSG thanks
Same problem here, could u please fix it 😁 really dont know to do it
Hi, actually if you follow the video step by step it is quite straightforward for this repair. Or you can email me at mrdiyyang@gmail.com. I can try my best to assist you.
the water supply is weak.is there an error or is the water supply continuous
First, you check whether the water pressure from the hose is strong (might be water supply weak)
Second, Check the your solenoid valve filter is it clogged.
Third, might be your solenoid valve need to be changed as i believe weak supply might be plunger inside it causing the issue.
Some machine will not show error issues despite the weak supply. Hope my advice helps
Hi DIY Yang. I have cleaned the filter in the water outlet. Is there a need to change the washing valve?
Hi JP, if it works fine after cleaning, you dont have to change. All we want is to let it work and save some money :)
So,i must buy it once per year ?
Hi, Nope, the one in this video haven't spoiled till date. So depends on your luck and usage of the washing machine I guess
Sir I have the same model washing machine I was getting exact same problem of no water filling in my washing machine that's why I have changed the valve.......Naw the machine is filling water but the flow of water is very slow,I have checked the voltage coming accross the valve and I am getting the required vtgs on right & left side vales ....But problem is that not getting any voltage on center valve......Why plz answer.
Sorry sir, I have no experience on this issue and still learning too. Maybe you could test the voltage the other end of the wire. Hope someone else can share if they have the solution for this issue
@@diyyangSG Okay no issue.
Great video. Quick question. On my washing machine, water comes out but the tub doesnt fill up with water. What coUld be the problem?
Thank you♥️. From what you explain, I believe your issue should be water level pressure switch/sensor. I do not have a video on that. Try to search using those keyword
Thanks!
what should i do if the washing machine is complete new ?
Hi, is your machine still under manufacturer warranty? it is best not to self repair as it might void your warranty. I did it as mine passes the warranty period.
You could try the following steps:
1) Try removing the water inlet pipe (Timestamp: 0:49) and turn on supply to test whether issue is the water supply to the washing machine
2) Try looking into washing machine inlet to see whether there is brown algae blocking the entrance of the valve (Timestamp: 4:28) Remove & Clean the darker blue filter and inner filter too
3) If there is no error code, I suspect is the same issue as mine (The machine is sending signal to the solenoid valve but it is not able to let in water)
hm po yun ganyan
Thanks bro
I got exact same problem no water filling but also no weight sensing too .. did you experience same problem of no weight sensing with your inlet valve issue ??
Hi bro, I did not experience the same issue as yours. But previously when i was doing research i found that another common issue is with the water level sensor/pressure sensor (round parts with tiny hose attached to it). You might want to try research around on that area
@@diyyangSG thanks so much bro
I truly appreciate your help :)
My samsaung is locked
What should i do
And the screen show only dC
Sorry I have not met this issue, this video will not be able to help you. But hope this 2 solution could help
1) You could try switching off the power for a period, to let the power run out and hope the door get demagnetize.
2) Take off the top cover and try to find the catch for the washing machine door and try to release it.
Common error code can be found on the samsung website
www.samsung.com/au/support/home-appliances/washing-machine-error-codes/
My Samsung will start to fill but before starting to wash will drain
@@marybombace5403, i suspect is your washing machine drainage rubber seal started to swell so the machine is not able to close the seal tightly. You could research around on that.
Hi sir. Our washing machine stopped before finishing the "wash"
Just wanna say “thank u so much ‼️”.. ur video tutorial helped me save money‼️ instead of calling for a technician- i was able to do it myself. All my gratitude ☺️
Your welcome, glad to help and kudos for DIY 👍😊. Thank you for subscribing to my channel too🙏 every sub counts for my small little channel 🥰
.sir First time water draining out second time water remain in washing machine
Sir that's bcoz my bro activated that unknowingly and Wat's the solution
Could be because of faulty drain motor or loose wire. If you can hear sound coming from the drain motor, could indicate it is faulty
@@diyyangSG no sound sir the thing my bro pressed some switches
@@GayathriDNGayi If it is some button press. you just off the power and unplug it. Leave for 10 minutes then try again. Usually most Samsung washer reset after doing that. If it is still not solve it is better to find a technician to help you
@@diyyangSG thank u sir
4C how?
I believe 4C is water supply issue too. Quite similar to my situation. Double check your water supply hose is not obstructed first. After check then you can try to replace the inlet valve.
For newer top fill models. WA547200A.
I recently moved the unit, plugged everything in and water wouldn't fill. I read manual that I had to recalibrate pressing temp and delay-end for 3 seconds then press start. Wait for 2 min till read zero. Washer will turn off automatically. Works fine now.
Thank you for sharing , learnt something new👍😊
I don't usually comment but thanks very much for making this video, saved me lots of time and money.
That's very nice of you🥰. Thank you for leaving a comment to let me know ur success and appreciate it alot👍
Thanks buddy. .. I need one more help. How to change door hinge of this machine. . plz help me
Hi sorry, I have not tried it before. Not able to help on that 🙏
Hi my samsung washing machine activ dual wash wobble model number is WA80J5712SW.
And it's valve is
C-123/19-b 10
33690155/369
220V/240V
50/60Hz Elbi
DC62-00266E
I can't find a store that has variation for model number and valve number in any online shop just state DC62-00266E this in their option would this work the same?
Hi, it is best to ask the online shop instead. They are up to date with the changes in the part and model. I tried before buying one that look similar but it is not advisable as sometime the housing is different. In the end, I have to file it to the same shape.