Universal Fender Flare Install Tips and Tricks - Project BMW E46

Поделиться
HTML-код
  • Опубликовано: 13 сен 2024
  • Installed some 100mm universal fender flares off eBay on Project E46. Here are a few things I learned in the process, and a few tips and tricks to help you install flares on your car.
    #bmw #e46 #drifting

Комментарии • 28

  • @jonathanfrutuozo4922
    @jonathanfrutuozo4922 3 года назад

    Hey man thanks for the video! I've been sitting on my flares for about 3 months and could figure it out. But this helps so much thank you !

  • @bishopm4401
    @bishopm4401 3 года назад +2

    I wanna throw fender flares like these on my project but I’ve got so much shot to do before that lol

  • @OctaneMonkey
    @OctaneMonkey 3 года назад

    I am installing the FDF angle kit on my car and need to modify my fenders. This is helpful.

  • @jasondonavich2758
    @jasondonavich2758 Год назад +2

    Probably a stupid question, but do the larger go at the front or at the back, I'm thinking small at the front large at the back?

    • @DriveBreakFixRepeat
      @DriveBreakFixRepeat  Год назад

      depends what you're trying to do. I put the big ones on the front so I can use full steering angle.

  • @self-madejacobo8281
    @self-madejacobo8281 Год назад

    Very informative video ! Thanks

  • @joshteplica5224
    @joshteplica5224 2 года назад +2

    How big are the spacers u used

  • @kevinpan5568
    @kevinpan5568 10 месяцев назад

    How would you cut up your fenders if they go over a door panel?

  • @rogerboswell5483
    @rogerboswell5483 11 месяцев назад

    I think ill use double edge tape and self tapping screws..

  • @jpeg.eric1
    @jpeg.eric1 2 года назад

    Got the link?

  • @saif312
    @saif312 3 года назад

    Why do you cut off your fender can’t you only put on the fender flare with the bolt?

  • @1minutewar-zoneclips643
    @1minutewar-zoneclips643 3 года назад

    Yeah I drive a 06 tsx I won’t need an angle grinder 😬 it’s gonna be a screw on type of thing

    • @DriveBreakFixRepeat
      @DriveBreakFixRepeat  3 года назад

      If you don't cut the fenders you don't gain any wheel clearance lol

  • @corollavirus4age
    @corollavirus4age 4 года назад +1

    holy shit that shopping car steering angle!
    well thats pretty good it gives a more agressive look to it
    it wont get that much better than this unless you make a new wide fender for each side with fiberglass or plastic but since its a drift car it makes no sense since you can hit something plus the rubber completely wrecking the inside of the fender and stuff when the tire tears apart

    • @DriveBreakFixRepeat
      @DriveBreakFixRepeat  4 года назад

      SLR says the Ultra kit can hit 70 degrees at full lock. Have an event soon, will put it to the test.

  • @CarsPaint
    @CarsPaint Год назад +1

    Lol it takes balls to cut up your car like that 😂

  • @nathanjoseph9977
    @nathanjoseph9977 3 года назад

    What flares are you using?

  • @santicontreras1213
    @santicontreras1213 3 года назад

    Possible ebay link to it?

    • @shane4722
      @shane4722 3 года назад

      If you search fender flares on Amazon those same ones will show up

  • @arielmontes5663
    @arielmontes5663 4 года назад

    What rims are those?

  • @simongorton3229
    @simongorton3229 3 года назад +2

    NO NO NO NOMEN DO NOT WEAR FLIP FLOPS EVER AND NEVER ON A RUclips VID 🤢🤮🤢🤮🤢🤮

    • @DriveBreakFixRepeat
      @DriveBreakFixRepeat  3 года назад +3

      my nasty ass feet say "welcome to socal." flip flop weather 24/7 dawg get used to it. 😎

    • @bishopm4401
      @bishopm4401 3 года назад +5

      Lmao you being this triggered over what other men wear is more concerning then flip flops
      Your feet probably stink too