Hp Ink Tank 410 Series Not Printing Blue And Yellow Solve

Поделиться
HTML-код
  • Опубликовано: 22 авг 2024
  • If you having trouble with your hp printer not printing blue and yellow, try this method maybe it will help you. Thank you.

Комментарии • 140

  • @ramirocarnicer2503
    @ramirocarnicer2503 2 месяца назад +5

    I was fighting with this friking thing for a long time, that purging with warm water trick worked like a charm! thanks!

    • @JunbaTeks
      @JunbaTeks  2 месяца назад

      I love to hear from you. Thanks too.

  • @Norachoi
    @Norachoi 5 месяцев назад +1

    Thank you.. worked well with my HP 515 printer .. i was having a problem with the yellow color not appearing when i print( yellow color was full+ tried many cleaning and every method but not worked) THE ONLY THING THAT WORK IS “ flushing the print head with water (more than 4 times) and works welllll”
    YOU ARE The ONLY helpful video for this issue
    So thank you

    • @JunbaTeks
      @JunbaTeks  5 месяцев назад +2

      I'm so very happy reading your comments. Thanks also to you. 🥰👍

    • @JohnLesterBoongaling
      @JohnLesterBoongaling 4 месяца назад

      Owemji thankyou so much iwatched the video and ive red ur comment. My hp smart tank 515 is working nowwwwww!!!! Thankyou to the owner of the video and thanks for this comment!

    • @Leon05X
      @Leon05X 4 месяца назад +1

      Im having the same problem but with cyan color, to be clear, you flush warm water though the top round tube on it (not down). Like he does on 6:39 Right?

    • @Norachoi
      @Norachoi 4 месяца назад +1

      @@Leon05Xyes the same as the video and try it more than once ( until you see the COLOR you want VERY CLEARLY VISIBLE on the paper/or napkins) like visible 7:11

    • @Norachoi
      @Norachoi 4 месяца назад +1

      @@Leon05Xand also try to flush it (put the water only with color you have a problem with)

  • @rubydumadag2667
    @rubydumadag2667 Год назад +6

    Thank you for sharing. This helps to fix color issue of my printer (yellow color). Thanks again. 😊

    • @JunbaTeks
      @JunbaTeks  Год назад

      I'm glad to hear you. Thanks also to you.

  • @footavengers8160
    @footavengers8160 7 месяцев назад +2

    The ink tank tube seemed complex so I cleaned the printhead
    Tons of ink was in there
    Now it is fine, thanks you saved my 5k rupees
    You deserve a like and a subscriber

    • @JunbaTeks
      @JunbaTeks  7 месяцев назад

      Feeling great to hear you brother. Thanks.

    • @viswakiranbhupathi8627
      @viswakiranbhupathi8627 6 месяцев назад

      I did the same (like and subscribe too :)). now the printer is working fine

  • @Tanisboxed
    @Tanisboxed 2 месяца назад +1

    Thank you omg, cleaned the printer head and it worked!! this problem was so annoying cause ive been printing documents in pink T_T

    • @JunbaTeks
      @JunbaTeks  Месяц назад +1

      Great to hear you, I love it 👍

  • @user-nr2rf9ol4q
    @user-nr2rf9ol4q 5 месяцев назад +1

    thanks for your presentation . yellow was not printing in my printer.

    • @JunbaTeks
      @JunbaTeks  5 месяцев назад

      You're welcome!

  • @angliping69
    @angliping69 6 месяцев назад +2

    Thanks for your video, finally I fix my printer! ❤

    • @JunbaTeks
      @JunbaTeks  6 месяцев назад

      So glad it helped!

  • @julianneraypamplona9661
    @julianneraypamplona9661 8 дней назад +1

    Thank you for this!

  • @mohammednajeeb9157
    @mohammednajeeb9157 7 месяцев назад +2

    Thank you! This was very helpful and the printer works now.

    • @JunbaTeks
      @JunbaTeks  7 месяцев назад

      I'm so happy to hear you it was helpful, thanks too.

  • @dimans254
    @dimans254 7 месяцев назад +1

    Hello from Kazakhstan, many thanks for sharing your knowledge. It works

    • @JunbaTeks
      @JunbaTeks  7 месяцев назад

      Glad to hear that. Thanks too.

  • @chxpoplugg5118
    @chxpoplugg5118 5 месяцев назад +6

    Today I tried to fix the printer, I didn't have yellow and blue colors, yellow showed up, but blue doesn't want to. Did I miss something?

    • @JunbaTeks
      @JunbaTeks  4 месяца назад +1

      If you did everything in the video sir and only the yellow one showed up, there might be a problem with the print head. But before you buy a print head, try flushing the print head again with warmer water.

  • @mmiikkee991111
    @mmiikkee991111 7 месяцев назад +1

    The video is great and exactly solved my problem .thanks a lot

    • @JunbaTeks
      @JunbaTeks  7 месяцев назад

      Glad it helped. Thanks

  • @user-nr2rf9ol4q
    @user-nr2rf9ol4q 5 месяцев назад +1

    many thanks for the detailed DIY ...

  • @mailarig4576
    @mailarig4576 2 месяца назад +1

    thanks to helping, thank you so much sir

    • @JunbaTeks
      @JunbaTeks  Месяц назад

      So nice of you sir, thanks too.

  • @tapetdagreat
    @tapetdagreat 18 дней назад

    Thankss so much for this tutorial

    • @JunbaTeks
      @JunbaTeks  17 дней назад

      You're so welcome. 👍

  • @kushagrasah7288
    @kushagrasah7288 Год назад +4

    After flushing with warm water should I completely dry the printhead or just plug it back in?

    • @JunbaTeks
      @JunbaTeks  Год назад +3

      You can plug it in, but make sure the colors, blue, red and yellow come out completely.

    • @usopjenny3547
      @usopjenny3547 5 месяцев назад

      Morning, kuya nag flushing nako Wala japon ang blue color

  • @siddharthasa
    @siddharthasa 4 месяца назад

    cleaning the printer head did the job. thanks for sharing

  • @vargav8878
    @vargav8878 14 дней назад

    Thanks this worked like a charm 🎉🎉

    • @JunbaTeks
      @JunbaTeks  13 дней назад

      Great to hear! 😍

  • @nakulshyamkumar9122
    @nakulshyamkumar9122 Год назад +1

    By watching to your video i was able to fixed it sir, thanking you so very much

    • @JunbaTeks
      @JunbaTeks  Год назад

      Glad to hear you brother.

  • @blecdoblon
    @blecdoblon 11 месяцев назад +2

    Thank you so much! This video greatly helped me!

    • @JunbaTeks
      @JunbaTeks  11 месяцев назад

      I'm so glad it helped!

  • @ValcaneantuFlorin
    @ValcaneantuFlorin 4 месяца назад

    Thank you too for the information you gave. I had to blow with pressure to get it to dissolve and flow yellow.

  • @alloliable
    @alloliable Год назад

    Thank you for this. I was about to get a new printer but this totally worked!

  • @suresh1483
    @suresh1483 Год назад

    Grate thanks for this video this helps to fix my colour issue in my printer 😊

    • @JunbaTeks
      @JunbaTeks  Год назад

      Thanks also to you from watching.

  • @felzon7531
    @felzon7531 Год назад

    Dyan pala natin malaman ang color idol kung bakit wala ang blue at yellow.

  • @wesleymoreira2923
    @wesleymoreira2923 11 месяцев назад +1

    bom dia meu Brother, ajudou muito seu vídeo. parabéns.................................obrigadoooooooooooo

    • @JunbaTeks
      @JunbaTeks  11 месяцев назад

      Sinto-me muito bem com seus comentários, irmão. obrigado.

  • @trahman8034
    @trahman8034 Месяц назад +1

    Thanks. It worked.

  • @cecilyonguso4063
    @cecilyonguso4063 Год назад +1

    helped me so much....thank you!!!!!!

  • @Aneekkhan62571
    @Aneekkhan62571 4 месяца назад +1

    Thank you

  • @vishuagrawal106
    @vishuagrawal106 Год назад

    Thanks for this
    My printer is now working ❤

  • @jercent7775
    @jercent7775 10 месяцев назад

    Thank you brother! This fixed it!

    • @JunbaTeks
      @JunbaTeks  10 месяцев назад +1

      Thanks it helped.

  • @antonicabie8033
    @antonicabie8033 2 месяца назад +1

    Hello what size of syringe did you use to suck the air in the pipe?

    • @JunbaTeks
      @JunbaTeks  2 месяца назад

      You can use 1ML sir, same in this video ruclips.net/video/o--Ylp87duE/видео.htmlsi=DC6hAUNeuRtg_9qQ

  • @aryaadh
    @aryaadh 8 месяцев назад +1

    thanks a lot sir
    its working

    • @JunbaTeks
      @JunbaTeks  8 месяцев назад

      Glad to hear that

  • @davidbrapenphy441
    @davidbrapenphy441 4 месяца назад +1

    After doing all the ink suction, and I returned the lid/cover back to its place. When I tried to test the printing, it showed E5 on the indicator screen. What was actually going on?

    • @davidbrapenphy441
      @davidbrapenphy441 4 месяца назад

      P.s. I didn't put back the screw back, just because I wanted to print testing only. I thought it would not be necessary

    • @JunbaTeks
      @JunbaTeks  4 месяца назад

      Ribbon wire loose contact problem. Try watching this video. ruclips.net/video/dn3obVvkNa0/видео.htmlsi=wpSKjJGRLb0lDpMd

  • @deryljohnmendoza9606
    @deryljohnmendoza9606 Месяц назад +1

    what if always back flow blue after suction and put clip on the hose?

    • @JunbaTeks
      @JunbaTeks  29 дней назад

      It's normal to flow back at least not too very far. Use a large clip that can be pressed hard.

  • @roseannsotto3381
    @roseannsotto3381 7 месяцев назад +1

    may i ask what screw did you use? had to do it myself 'cause I'm currently in the university 😅

    • @JunbaTeks
      @JunbaTeks  7 месяцев назад

      Torx or star wrench #10.

  • @NourMohamed-jr9rk
    @NourMohamed-jr9rk Год назад

    thanks a lot dear ... excellent help

    • @JunbaTeks
      @JunbaTeks  Год назад +1

      You're so nice. Thanks

  • @ririn6679
    @ririn6679 11 месяцев назад +1

    unsay ngalan o tawag sa mga syringe ya sa botika mana mapalit ba salamat sa pag share sa video ug sa pag tubag

    • @JunbaTeks
      @JunbaTeks  11 месяцев назад

      O sa botika rani mapalit dong. ingna lang nga 3 or 5cc disposable syringe.

  • @joRox1875
    @joRox1875 Год назад +1

    hello from cessling

  • @melaniedelossantos4146
    @melaniedelossantos4146 Год назад

    Very nice full support new friends watching

  • @user-lj7bv4rs4z
    @user-lj7bv4rs4z Год назад +1

    Hi may i ask whats the size of the syringe you used for sucking the tube heads thanks.

    • @JunbaTeks
      @JunbaTeks  Год назад +1

      I used 3cc, but it would be better if we use a bigger one.

  • @praveendiya
    @praveendiya Год назад +2

    Same idea to use blacke ink. Is its possible

  • @ahmedasif2858
    @ahmedasif2858 Год назад

    My printer ok now... Thanks a lot

  • @bksingh8035
    @bksingh8035 4 месяца назад +1

    After doing everything ink started coming but only blue and yellow and when i checked all the ink was again back...why is the ink backflowing in the tubes.

    • @JunbaTeks
      @JunbaTeks  4 месяца назад

      This is normal as long as it is not too far from the nozzle.

  • @elishangobe9254
    @elishangobe9254 Год назад

    Thx, this has earned my subscribe

  • @sachinthabimsara8930
    @sachinthabimsara8930 Год назад

    It's working. Thank u so much😊

  • @user-ir9jv6bp8y
    @user-ir9jv6bp8y Год назад

    Thank you so much it worked

    • @JunbaTeks
      @JunbaTeks  Год назад

      Glad to hear you. Thanks too.

  • @petrossigalas3552
    @petrossigalas3552 Год назад

    Thank you!!

  • @rajesh9476
    @rajesh9476 5 месяцев назад +1

    what size instrument you use to open?

  • @charischaris3165
    @charischaris3165 8 месяцев назад +1

    good evening.... the device that sucks the ink from the syringe, i.e. what size is its head. I have the same problem and the yellow one doesn't work

    • @JunbaTeks
      @JunbaTeks  8 месяцев назад

      Commonly used syringe size, 3ml to 5ml.

    • @charischaris3165
      @charischaris3165 8 месяцев назад

      @@JunbaTeks thank you very much for your answer..... and the thickness of the printer tubes? if needed to order

    • @JunbaTeks
      @JunbaTeks  8 месяцев назад +1

      You can wrap rubber tape around the end if it is small.

    • @charischaris3165
      @charischaris3165 7 месяцев назад

      @@JunbaTeks Thank you very much

  • @svrthardware9038
    @svrthardware9038 Месяц назад +1

    I too have same problem i had cleaned but Blue & Yellow Colors missing only Pink & Black was working
    My printer is Hp inktank 316 || I tried this trick but unfortunately not working
    Is there any tip to help me ❓ ||||| Kindly please anyone reply a solution

    • @JunbaTeks
      @JunbaTeks  29 дней назад

      Did the yellow and blue come out of the tissue when you wiped the cartridge after doing everything in the video? If not, maybe the cartridge is really bad and needs to be replaced.

  • @CoYco-bu8wt
    @CoYco-bu8wt Год назад

    Thanks to your video it helps.

  • @lakshmiprasads.m8813
    @lakshmiprasads.m8813 Год назад +1

    Let me know what type of syringe you have used name of syringe...?

    • @JunbaTeks
      @JunbaTeks  Год назад

      You can use luer lock tip or luer slip tip syringe sir, 3 or 5 cc.

  • @meditate_with_music
    @meditate_with_music 11 месяцев назад

    I tried both but I kept only having pink ink on tissue and print. Should I buy a new coloured cartiladge?

    • @JunbaTeks
      @JunbaTeks  11 месяцев назад

      Just try at least 5 times mam, before you buy a new cartridge.

  • @linscawa4720
    @linscawa4720 Год назад

    Nice 👍

  • @creeampy
    @creeampy Год назад

    *Thank you so much, bro >_--, I've already lost hope*

  • @sakheralahmad8359
    @sakheralahmad8359 4 месяца назад +1

    Still no yellow .. what can I so???

    • @JunbaTeks
      @JunbaTeks  4 месяца назад

      Try submerging the printhead in warm water. Just watch my new video. ruclips.net/video/YHMFGykgpNM/видео.htmlsi=iKwIBZIaitH0tMe1

  • @denzellapitan2469
    @denzellapitan2469 Год назад

    What if after flushing for a few minutes the colors blue and yellow still hasn't come out yet? Should I replace the cartridge instead?

    • @JunbaTeks
      @JunbaTeks  Год назад +1

      Yah, because the purpose of this method is to dissolve the ink that has hardened inside by flushing with warm water. If you have done this and color ink still does not appear, there may be something wrong with the cartridge.

  • @nicoleimperial950
    @nicoleimperial950 8 месяцев назад +1

    The ink still move back when i remove the clip

    • @JunbaTeks
      @JunbaTeks  8 месяцев назад

      It's okay as long as it's not too far.

  • @kristelbulaong1656
    @kristelbulaong1656 Год назад +1

    Bakit po ayaw pa din pag nag print na ng picture 🥲 pero pag nacheck napo okay naman na

    • @JunbaTeks
      @JunbaTeks  11 месяцев назад

      Lumalabas na po ba ang kumplitong color mam, blue red and yellow?

  • @renugupta4948
    @renugupta4948 Год назад +1

    Bro I did it🎉🎉

  • @julkarninejulkar4432
    @julkarninejulkar4432 9 месяцев назад +1

    Trox screwdriver model please ?

  • @gloriaavasi9075
    @gloriaavasi9075 Месяц назад +1

    Itu size syringe mcmama ah yang Besar Dan kecil

  • @hochimmy9122
    @hochimmy9122 Год назад +1

    Can’t solve the problem, there have explanation mark

  • @ibellemerin8623
    @ibellemerin8623 Год назад

    Subukan natin kung mag work ba.

  • @ritobertes4656
    @ritobertes4656 Год назад

    Murag klaro ni imoha gaw bisan walay istorya.

  • @nahidnabil3173
    @nahidnabil3173 4 месяца назад

    Please don't follow this method guys. This guy has given a shitty fix. Bcz when you will remove the syringe the ink will flow back.

    • @JunbaTeks
      @JunbaTeks  4 месяца назад

      Maybe you didn't get the methods. Thanks anyway even if you don't like this video.

  • @suckhoevalamdep
    @suckhoevalamdep 3 месяца назад

    thank you