hi thanks for the tutorial. But I have a problem with the tcx converter. At the ALT level, instead of having the different altitudes, I rather have '' OCTYPE HT ... '' which is displayed. please, how do I deal with this problem?
what does it mean if the result of DEM is just BLACK not the same with the result shown in the vid? :( can I apply this step in getting the elevation of a small area? Please, reply.
Very Good Tutorial. However I tried to use the TCX converter over coast line and the topography is limited to 0 when the path is on the sea... Is there a way to get the full elevation data offshore and onshore???
Having an Issue to import the file as text layer. QDUS says: "No data found in the file." I followed all steps but the QDIS sorts all data of the CVS (Lat,Lang,ALT + all numbers from left to right. It seems it does not realize that Lat, Land and ALT are the headlines for the columns?! Anyone an idea?
Can not generate the DEM, I follow exactly what you did but I guess there is something wrong please help me. I am using version 2.16 Thank you so much any response will be highly appreciated.
Tried using qgis 3.0.1. When i tried using natural neighbour, an error occured saying the layers were not correctly generated. The solution from the forum doesn't seem to work. Anyone? An absolute newbie here.
when i transfere the kml file in TCX converter and correct the the altitude i get something written 'OCTYPE HTML PUBLIC' why is it so can anyone let me know please
I run into this problem and I was able solve it this way - I opened page www.gpsvisualizer.com/elevation ...there I browse for my .kml file and added and converted elevetion there... I saved output as .gpx file... Then I loaded this .gpx file in TCX Converter instead that .kml... now do NOT add altitude in TCX Converter, but only export your file in .csv format... And then you can continue in this video manual with it :-)
does anyone know why my altitude is showing different from what appears in tcx converter? it should be within 700-1000, but when in qgis it ranges only from 100-600..
Please how can I generate the maximum annual rainfall data for weather stations in the South-south region of Nigeria through QGIS or from global weather
When I'm trying to run the SAGA Natural Neighbour tool, there is an error saying: ERROR 1: Can't load requested DLL: C:\PROGRA~2\QGISES~1\apps\saga\dll\gdal_MrSID.dll 127: The specified procedure could not be found. Please help!!
I have downloaded TCX Converter from the official site. Although I push "update altitude", altitude values can't be displayed on table. Only "ml>" is written on altitude(ALT) field instead of integer values. Why does it happen?
Got the same problem, natural neighbour was there half a year ago, now its gone... cant download it somewhere else... the newest Gis version doesnt have it either
Very nice and useful video. Can I ask one question? Can I apply this method to calculate the height building in small area? Please respond me! thank you
it is useful for the geographers...nice & well.but i want to know tht in q-gis there are have a problem on a linear scale in new composar on my work .i was done my work on a map and i degitized on upon in same scale but i cant get the same value after the the new composar with lat/long..can u tell me...why it happen../and what is the suggetion from u..
@@dercolemanuele hi, yeah I did unfortunately no longer already to be there.. . Not sure if you can help. I have however managed to find a 5m square DEM of the area in interested in but what I need is I'm trying to export it out of QGIS as a 3d object. Either .obj or .fbx would be great, for using in 3d CAD software, but I've not identified how to export just yet.. Any pointers on how to best go about that?
Hi . thanks for this tutorial but I can not generate the contour line from the processing toolbox. I use UBUNTU 15.04 I get following message.\ Missing dependency.This algorithm cannot be run :-( This algorithm requires SAGA to be run. Unfortunately, it seems that SAGA is not installed in your system, or it is not correctly configured to be used from QGIS Would appreciate any help to fix the problem
I got a problem when generating DEM. Here is the error message: The following layers were not correctly generated. Grid You can check the log messages to find more information about the execution of the algorithm
Cannot get this to work! after clicking "Update Altitude" TCX Converter turns the "ALT" data to "ml>" does anyone know why? and how to fix this? Thanks.
+Nesh P - This method can be useful for multiple things such as combining open source elevation data with .gpx tracks, or creating your own DEM from your gps device etc. I can see a way to crowdsource elevation data using cellphones, garmins and other devices for areas where LIDAR is not available, and combining it with the elevation from these available sources and making a pretty dang good makeshift DEM. It's really the methods that are useful to me, not necessarily the quality of the data. I can worry about that now I know another technique for joining this stuff together.
you wrote, you can download free DEM elevation data for every area in the world ? So I am asking what websites are you using that are free to get accurate DEM's for the entire world?
Natural Neighbor tool is giving me an error 'NoneType' object has no attribute 'crs' See log for more details . Can you please help me? Thanks. My QGIS version is 2.18
when i transfere the kml file in TCX converter and correct the the altitude i get something written 'OCTYPE HTML PUBLIC' why is it so can anyone let me know please
I run into this problem and I was able solve it this way - I opened page www.gpsvisualizer.com/elevation ...there I browse for my .kml file and added and converted elevetion there... I saved output as .gpx file... Then I loaded this .gpx file in TCX Converter instead that .kml... now do NOT add altitude in TCX Converter, but only export your file in .csv format... And then you can continue in this video manual with it :-)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Did you ever address the issue mentioned by Ata et al. below? No altitude values appear in TCX converter screen, just "ml>". A bit frustrating!
hi thanks for the tutorial. But I have a problem with the tcx converter. At the ALT level, instead of having the different altitudes, I rather have '' OCTYPE HT ... '' which is displayed. please, how do I deal with this problem?
tcx converter didnt update altitude. in the altitude column says OCTYPE HTML PUBLIC "-//IETF//DTD HTML 2,0//EN">
use gps visualizer website
@@onkar26 how ??
Thank you so much, I could make maps with your help. Easy, simple and fast.
what does it mean if the result of DEM is just BLACK not the same with the result shown in the vid? :( can I apply this step in getting the elevation of a small area? Please, reply.
Very Good Tutorial. However I tried to use the TCX converter over coast line and the topography is limited to 0 when the path is on the sea... Is there a way to get the full elevation data offshore and onshore???
Having an Issue to import the file as text layer. QDUS says: "No data found in the file." I followed all steps but the QDIS sorts all data of the CVS (Lat,Lang,ALT + all numbers from left to right. It seems it does not realize that Lat, Land and ALT are the headlines for the columns?! Anyone an idea?
hello at 8:02, you save DEM.tif, i'm using the same version of QGIS2.10.1 but no .tif option, just .sdat file option? what can i do?
Thank you so much. I got a lot information that I did not find in others videos.
Can not generate the DEM, I follow exactly what you did but I guess there is something wrong please help me. I am using version 2.16 Thank you so much any response will be highly appreciated.
WHEN I UPDATE THE ALTITUDE IT SAYS ML.
Tried using qgis 3.0.1. When i tried using natural neighbour, an error occured saying the layers were not correctly generated. The solution from the forum doesn't seem to work. Anyone? An absolute newbie here.
Did you solve it?
I can't do "DEM" correctly because I can't put Grid on .tIf but only on .sdat
Do you have an explanation ?
Thanks you
when i transfere the kml file in TCX converter and correct the the altitude i get something written 'OCTYPE HTML PUBLIC' why is it so can anyone let me know please
Same Problem with me
I run into this problem and I was able solve it this way - I opened page www.gpsvisualizer.com/elevation ...there I browse for my .kml file and added and converted elevetion there... I saved output as .gpx file... Then I loaded this .gpx file in TCX Converter instead that .kml... now do NOT add altitude in TCX Converter, but only export your file in .csv format... And then you can continue in this video manual with it :-)
does anyone know why my altitude is showing different from what appears in tcx converter? it should be within 700-1000, but when in qgis it ranges only from 100-600..
Hi! Have you found a solution?
Hey, try going to the website GPS Visualizer and click on look up elevations, then you convert the kml to gpx before using the TCX.
i think the elevation accuracy between 30m to 90m, it's just a free data, and you can download DEM file directly USGS with accuracy 30m as free.
how can I download it ?
thnq so much, this helped a lot in my final year project
Please how can I generate the maximum annual rainfall data for weather stations in the South-south region of Nigeria through QGIS or from global weather
When I'm trying to run the SAGA Natural Neighbour tool, there is an error saying:
ERROR 1: Can't load requested DLL: C:\PROGRA~2\QGISES~1\apps\saga\dll\gdal_MrSID.dll
127: The specified procedure could not be found.
Please help!!
same problem occurs in my case too
Do you have another link for TCX Converter please? this one couldn't reached ! Thank you>
I have downloaded TCX Converter from the official site. Although I push "update altitude", altitude values can't be displayed on table. Only "ml>" is written on altitude(ALT) field instead of integer values. Why does it happen?
+Ata oh yes, same problem here. Can anyone solve this issue?
+Ata I also have met the same problem, and still I can not find a problem solving.
+Ata Try to open TCX in administrator mod ;)
What is administrator mod?
+SongHyun Choi If you use Windows, right click on TCX icon in your Desktop and select "Run as administrator" (Sorry my english is bad :/ ;) )
is this a plugin that is embedded in another set? I'm searching for the Path icon but cannot find it anywhere
hey is that units in metres or in ft
thank you very much, after a big esffort i can do it now, thank you
Hi, thanks for the tutorial but I couldn't find the natural neighbour (grid) of SAGA in toolbox of QGIS
Got the same problem, natural neighbour was there half a year ago, now its gone... cant download it somewhere else... the newest Gis version doesnt have it either
Very nice and useful video. Can I ask one question? Can I apply this method to calculate the height building in small area? Please respond me! thank you
no sorry, because google earth and TCX Coverter can't provide height building.
Great tutorial but I can't even get the first screen up with all the icons showing. Can anyone help, as I expect everyone else can do it no trouble.
it is useful for the geographers...nice & well.but i want to know tht in q-gis there are have a problem on a linear scale in new composar on my work .i was done my work on a map and i degitized on upon in same scale but i cant get the same value after the the new composar with lat/long..can u tell me...why it happen../and what is the suggetion from u..
thank you soo much, with out speaking you been so effective..
Hillas - did you get TXC Converter? I can't seem to download it from the official website.. Can anyone help with getting that file?
@@hiranga I'm sorry hiranga i didn't check, did you check in the web in general?
@@dercolemanuele hi, yeah I did unfortunately no longer already to be there.. . Not sure if you can help. I have however managed to find a 5m square DEM of the area in interested in but what I need is I'm trying to export it out of QGIS as a 3d object. Either .obj or .fbx would be great, for using in 3d CAD software, but I've not identified how to export just yet.. Any pointers on how to best go about that?
@@hiranga i see you are at a good level while im at the first stage thus not sure to be able to help of that detail, but thank you having asked
Hi . thanks for this tutorial but I can not generate the contour line from the processing toolbox. I use UBUNTU 15.04
I get following message.\
Missing dependency.This algorithm cannot be run :-(
This algorithm requires SAGA to be run.
Unfortunately, it seems that SAGA is not installed in your system, or it is not correctly configured to be used from QGIS
Would appreciate any help to fix the problem
Hi, i've got a little problem.
When I import my csv in QGIS, i can see that the cloud of point is completly deformed.
Can you help me please?
how can i add saga tools in Qgis 2.10?
can we use different date of google earth to know the difference in dem if landslide happened
I want to get .DEM file as output for map portion. how can this be achieved?
Where do you get the elevations? and what accuracy?
I use Google Earth instead of Google Earth Pro and everything was OK ! Thanks a lot !
Do you know if it's possible to do the the same with OSM ?
How do I get this into leaflet?
I get an error message that the selected attribute is not numeric, any suggestions how to fix it ??
Sir while updating altitude i m not getting any value in that column but ml> is coming. But I not getting why this is coming.
Sir please help me..
i did update the Altitude, but it remain zero 0.
Great video, thanks a lot!!!
Also, the music is great when watching at speed x2 ;)
TCX Converter updating ml> instead of altitude?
how to do the same with the seabed?
No altitude value appears in TCX Converter...it remains zero..kindly help
WHAT CONVERTER GOOD FOR WINDOW 10
how can I do it on Global Mapper 22.0 (64-bit)
Thanks, it's very useful with me
when i try to insert the csv file it says the file does not exist. please help.
Hey Thx for this great demo !
Very helping tutorial.
Can you please show how to compute volume from Google Earth into QGIS
?
Please create a tutorial to create watershed delineation.
there is no Grid : natural neighbour in the saga (2.1.2) menu. i am using qgis 2.14.1
help me to solve this issue
You might find it under Raster creation tools tab. I'm using 2.16.0.
I've installed QGIS 2.12.1 but I can't install SAGA processing. What do I have to do?
+Daniele Mercuri change to advanced interface at the bottom
+CM Brahmadath I met this problem too. and i changed to advancee interfece at the bottom. but still can't SAGA. Pleas help me?
I got a problem when generating DEM. Here is the error message:
The following layers were not correctly generated.
Grid
You can check the log messages to find more information about the execution of the algorithm
did you solved this problem.. please share if u solved it.. mine also same problem...
Cannot get this to work! after clicking "Update Altitude" TCX Converter turns the "ALT" data to "ml>" does anyone know why? and how to fix this? Thanks.
i also ran into such problem. i suppose that it is due to the googe earth version he used is PRO.
Anyone knows the background music?
not working, altitude not showing,even after run as administration.
Please provide the tcx converter download link...
"The following layers were not correctly generated." Why can't I run the algorithm? I'm using Google Earth Pro.
IS TCX convertor is a free software???
Hello sir, this matoth is a right,
Why would someone draw like Picasso over google earth canvas when you can download free DEM elevation data for every area in the world ?
+Nesh P - This method can be useful for multiple things such as combining open source elevation data with .gpx tracks, or creating your own DEM from your gps device etc. I can see a way to crowdsource elevation data using cellphones, garmins and other devices for areas where LIDAR is not available, and combining it with the elevation from these available sources and making a pretty dang good makeshift DEM. It's really the methods that are useful to me, not necessarily the quality of the data. I can worry about that now I know another technique for joining this stuff together.
+Nesh P where do you get this info specifically? cheers
+Nesh P Could you explain please?
you wrote,
you can download free DEM elevation data for every area in the world ?
So I am asking what websites are you using that are free to get accurate DEM's for the entire world?
+Nesh P how can i get free DEM elevation for Malaysia, can you explain which website offer this. tq. :)) goodday sir.
thanks for this video
Thank you!
Thank you po!
Brilliant!
thx for this video ;)
What is QGIS 2.10 ؟
It's the most powerful OPEN source GIS software today!!!!
LOL is Monde Geospatial even checking the replies to this video? I want to know where TCX Converter got it's height info from.
in fact we don't know where TCX Converter got heights, but the accuracy is good.
+Nicholas Heidl heights was generated by google earth
Magnifico
Great!
THANK U
is it free, i mean the TCX?
thanks
Arc Gis tutorial by Tania Banerjee
TCX is troublesome
ArcGis tutorials
Natural Neighbor tool is giving me an error
'NoneType' object has no attribute 'crs' See log for more details . Can you please help me? Thanks. My QGIS version is 2.18
I have the same problem. Anyone to help?
Μάκης Μιχαλόπουλος i have found another way not via tcx
Can you explain it to me?
I cannot proceed creating dem, I have followed carefully but end up the error "'NoneType' object has no attribute 'crs'" please help. thanks
there is no Grid : natural neighbour in the saga (2.1.2) menu. i am using qgis 2.16.0
help me to solve this issue
You might find it under Raster creation tools tab. I'm also using qgis 2.16.0.
how can i add saga tools in Qgis 2.10?
Search "Configure QGIS Processing" by mapeez. ☺️
when i transfere the kml file in TCX converter and correct the the altitude i get something written 'OCTYPE HTML PUBLIC' why is it so can anyone let me know please
I run into this problem and I was able solve it this way - I opened page www.gpsvisualizer.com/elevation ...there I browse for my .kml file and added and converted elevetion there... I saved output as .gpx file... Then I loaded this .gpx file in TCX Converter instead that .kml... now do NOT add altitude in TCX Converter, but only export your file in .csv format... And then you can continue in this video manual with it :-)
@@erikbanik2384 Perfect!
@@erikbanik2384 Thank you so much for this workaround!