Sadly due to a lack of funding, the sequel was never filmed. I feel the sequel would have answered all the questions left unanswered from part 1 and could possibly have lead to a trilogy. Your fans will always be waiting pump repair guy, we haven't forgotten you.
I used this pump to replace the pump on a Ecell 3100 PSI pump. ruclips.net/user/postUgkxEU8wdEWW31diRsOawsCNfWEho39M27qd The model # is PWZ0163100.02 for those looking for a matching pump. It went on very easily - 10 minutes at most. Feels like a lot more power than the original but that's to be expected. Can't tell a difference when cleaning with the wand or floor sprayer. Would recommend as it was cheaper than most I found. The maintenance free aspect is definitely a plus too. Have used it through about 6 tanks of gas and have zero issues so far.
Good morning I have a high pressure machine brand cat pump and I think I'm mixing oil in the pressure pump the oil looks yellow some help thanks model# 3spx30g1ip 3800psi
Lack of funding? What does this mean? Didn't you repack and repair this pump THAT DAY? You couldn't afford the replacement parts of the pump you were showing how to rebuild, or what? 8 year olds post videos to youtube, man. Nobody ever follows through with sh*t...
whats the difference between a pressure pump that has a high PSI rate but low water flow rate and visa versa? I dont understand.. There are pumps with a high PSI pressure rate yet the water flow rate is only 12L per minute and there are pumps that are low PSI but high water ie 18L per minute..... how do you know which is stronger? You would think that the higher the PSI pressure rate the greater the water flow rate but its not the case! I just dont get it.
Hi, a technical question wishing you can answer it. - is it possible to fix two water jet output to one hose gun? If yes in two water jet 250bar, did i get 500 bar of nozzle output? Tank you and God bless you and your family 👪
Hi there, I'm having trouble with my Hydramaster Cross Fire, the fresh water output its spitting thick smelly substance and steam, but won't throw fresh water as it should, and fresh water tank shows no change at all, almost as if no water was running thru the system. any ideas or suggestions? I would really appreciate any help
My pressure washer is leaking water between the crankcase and manifold. There are no other problems. Is there a gasket or O ring between the crankcase and manifold or should I use silicone sealant during reassembly?
Sadly due to a lack of funding, the sequel was never filmed. I feel the sequel would have answered all the questions left unanswered from part 1 and could possibly have lead to a trilogy. Your fans will always be waiting pump repair guy, we haven't forgotten you.
😂
Must be some way to petition youtube for the removal of bonehead video dudes.
I used this pump to replace the pump on a Ecell 3100 PSI pump. ruclips.net/user/postUgkxEU8wdEWW31diRsOawsCNfWEho39M27qd The model # is PWZ0163100.02 for those looking for a matching pump. It went on very easily - 10 minutes at most. Feels like a lot more power than the original but that's to be expected. Can't tell a difference when cleaning with the wand or floor sprayer. Would recommend as it was cheaper than most I found. The maintenance free aspect is definitely a plus too. Have used it through about 6 tanks of gas and have zero issues so far.
i made my seals for brass bolts out of copper washers and they worked .saved 55 dollars
Well....a link to Part-2 would have been especially helpful, ya think?
I like the SRV in the beginning
What the hell where is part 2, It's been five years
Please post part 2
2019 and still no Part 2?
waiting for part 2
Part 2 ? How do I refer to something that don't exist?
also en august 2015, I´am looking for part two....
no part 2???
Oil? 15w40?
We can supply mud pump spare parts
What is the torque for setting the eight head bolts?
[ ] Pump Mounting bolts @ 133 inch lbs
[ ] Valve covers, teflon tape, 478 inch lbs
[ ] 106 inch lbs for 13mm nut on the pistons
Part 2 is same video but in reverse!
i fell asleep during part one. feel as though part two takes years to complete.
Looks like you were correct.
Which company makes this pump?????
From the resolution of this video, I believe it was shot using a potato. Might I suggest a modern video camera for the sequel?
The potato head was the guy who made the video
With all the work you did and replacement parts. I rather buy a new one.
hello good video, take a doubt, what type of oil is used in the character of this machine
Why would you have to ask what kind of oil? Bonehead video
Dear sir i have a mermaid e 500 water balst pump . Can you send me a draw how can i overhall it ?
What size are those screw cap?
Just about that size. Welcome to lacking intelligence bonehead videos
Good morning I have a high pressure machine brand cat pump and I think I'm mixing oil in the pressure pump the oil looks yellow some help thanks model# 3spx30g1ip 3800psi
kenneth Jimenez
Format your sentence correctly. Say I’m mixing water in the oil pump.
yall are really waiting on part 2? seriously
Where is part two? WTF? It's been over a year already. lol
part 2 is missing still,,,,,,,
Is pump ki nojal ki kits chaye
Where can u get parts?
Hey what happen to part 2
Good video just incomplete. If you have questions no one answer, this Channel are gone. No one attending and that's sad.
Part 2?
Mani how much india
تمام
hawk
where the fuck is part 2
Lack of funding? What does this mean? Didn't you repack and repair this pump THAT DAY? You couldn't afford the replacement parts of the pump you were showing how to rebuild, or what? 8 year olds post videos to youtube, man. Nobody ever follows through with sh*t...
I'm out.
could tell this guy was a tool by how painfully slow he works... not to mention.... WHERE'S PART 2???????????
Such a cliff hanger.
whats the difference between a pressure pump that has a high PSI rate but low water flow rate and visa versa? I dont understand.. There are pumps with a high PSI pressure rate yet the water flow rate is only 12L per minute and there are pumps that are low PSI but high water ie 18L per minute..... how do you know which is stronger? You would think that the higher the PSI pressure rate the greater the water flow rate but its not the case! I just dont get it.
Part 2?
kindly upload part 2 as soon as possible..
Hola muy buenas tarde como ago para comprar esas canastillas que se ven en el video las necesito para una idrilavadora industrial ordoño
Hi, a technical question wishing you can answer it.
- is it possible to fix two water jet output to one hose gun?
If yes in two water jet 250bar, did i get 500 bar of nozzle output?
Tank you and God bless you and your family 👪
Poor guy...forgot to put up part 2...we're in 2014 and he put up part 1 in Aug 2012...I guess it won't be coming soon lol
Hi there, I'm having trouble with my Hydramaster Cross Fire, the fresh water output its spitting thick smelly substance and steam, but won't throw fresh water as it should, and fresh water tank shows no change at all, almost as if no water was running thru the system. any ideas or suggestions? I would really appreciate any help
My pressure washer is leaking water between the crankcase and manifold. There are no other problems. Is there a gasket or O ring between the crankcase and manifold or should I use silicone sealant during reassembly?
Hi , could you please upload part 2 of this video. It's October 27th 2015. Greatly appreciated
I need ww 962 ceramic plungers and packing seals
Good
donde puedo comprar la bomba
Why can't someone else make Part 2?
imagine my dismay when I wanted to see more but no part 2
Love that music stevie ray Vaughn
C'est bien ce le technicien fait
Thanks Good video