Mavic Pro Zoom and Anafi Zoom is lossless which means you don't lose image quality when you zoom in Evo's is not and the more you zoom the worse the picture looks. If you need 4k zoom the mavic 2 pro zoom is better than anafi's but it costs 3 times as much
@@tdrdronesebikesandscooters8377 Thanks for clarifying that. I have playing around with the zoom feature on the Mavic Pro but I mostly forget to ever use it. It's just easy to use.
It's only a x2 zoom on the mavic pro but i found it works well and is easy to use, but it's also easy to forget about it because no one ever seems to use it or even talk about it.
Dude this video makes me really want this drone. No joke! Everything is so tighty! so nice and easy to work on, God for bit she falls from 1100ft in Philly? Lol lol. Not like DJI drones where you need to be an alien to work in them! Thx Wayne! How's the distance and dependability on this WiFi Drone? Better or worse then the Mavic air? Thx bud!
While watching this video I noticed that your drone has 2 less screws than mine and I am wondering what the purpose of them is. At :23 above where the battery plugs in you can see it is just smooth and flat next to where the battery clicks in, but on my Anafi there are actually screw holes to the left and right of the slot the battery clicks into. When I remove the GPS plate cover though I can see that they do not actually screw into anything at all, and are just kinda sitting there in the holes. Wondering if you have any idea what purpose those screws have, and why your unit does not have them?
Thanks for this video! I had a crash with my anafi, thank God I was able to restore it and it works fine. Only thing is not working is the blue light, after watching your video I went ahead and opened it to see if the connector to the light module was still attached, and it is, but it just do not light up. Do you think there's a shortcut like a reset or should I try to order the light module from Parrot? Thanks for your help!
Anything could be causing that light failure, A Front light burned out on my Yuneec Breeze, i took in apart and never could figure it out. As long as it flies ok i would not worry about it.
I can't turn off the battery when the battery is connected to the drone. The only thing that turns on is the blue light at the bottom. I think it is the circuit board? What else is going on? Any suggestions would be great.
What can I do if my anafi shows a "vertical camera failure" message? Do you think is just a bad connection between then vertical camera and the main board? Or is necessary to take it to the technical services?
No, I didn't crash it, the message just showed up. I already try all the resets and calibrations that shows in the app and in the manual, but still doesn't work that's why I think it's something whit the hardware.
So what you do Esteban, obviously that thread gave more questions than answers. I messed mine up months ago due to a crash and idk if Best Buy covers warranty under a year I obviously won’t tell them I crashed. I’ll just use the, I updated firmware and now it doesn’t work exuse. I also didn’t buy the insurance. I can’t even buy the part and replace it. Hope you answer. Been a while.
@@richardaguilar8582 My drone (Anafi) has fallen and the battery dropped out. He then writes that: “Vertical Camera Failure”, and it doesn’t fly. I bought one new vertical camera, i installed it, but problem is the same, doesn’t fly. I have two things in mind: 1. Vertical camera identification error (software error, no system shutdown correctly, because the battery dropped out when crashed - solution: firmware reinstall, I'm waiting when Parrot release new firmware) OR 2. Mainboard error 🙁
Hi, my anafi crashed and a gimbal connection got disconnected. I took apart the drone and put everything back together but now its showing a "no sd card" error. Any idea on what could it be? I've tried everything I could think of. Thanks in advance.
Did you ask on the parrot forums. That's where you need to start. it could be a battery connection because the wires to the sd card run through the battery.
I have the same problem! I have switched the motors after my ANAFI crashes :/ After my repair the drone can't detect my SD-Cards. Same Error... Did you solved the problem ?
Наука
She makes it look so easy.
This is a fantastic find. Bookmarking this. Thanks Bryan!
Very cool . I've been thinking about buying the Anafi so I've saved this tutorial . Thanks for sharing ! 👍👍
Yep. Awesome! !! 💡🔔👍🎧🏍🕭🕭
Save it for later
useful sharing, thank you very much and happy weekend :)
Wonderful video. Hope you have a great day & weekend!
Good Job!
Very cool post!!! This drone is so cool!!! 👍😀👍
Great how to video. I don't have an Anafi, but you never know, maybe one day, lol
Love the anafi, oh again first.
how to remplace the camera?
Very interesting. I will need this if I decide to get the Anafi, I love that zoom feature.
The zoom is better than the evo zoom
@@tdrdronesebikesandscooters8377 Is the EVO zoom like the Mavic Pro zoom?
Mavic Pro Zoom and Anafi Zoom is lossless which means you don't lose image quality when you zoom in Evo's is not and the more you zoom the worse the picture looks. If you need 4k zoom the mavic 2 pro zoom is better than anafi's but it costs 3 times as much
@@tdrdronesebikesandscooters8377 Thanks for clarifying that. I have playing around with the zoom feature on the Mavic Pro but I mostly forget to ever use it. It's just easy to use.
It's only a x2 zoom on the mavic pro but i found it works well and is easy to use, but it's also easy to forget about it because no one ever seems to use it or even talk about it.
Why Bryan I didn't know you paint your fingernails red great videos cuz someday you may need this help with anafi 👍👍
lol, I'm on youtube vacation
@@tdrdronesebikesandscooters8377 hey everybody has to take time off enjoy it plus the weather isn't very good for our hobby right now
Hey leave his nails alone Brian is a beautiful unicorn. 🦄
Where do you buy the extra engines?
The new motors have braded cables - is this a improvment for lesser transmitter interferences ???
Don't know but it will stop them from cracking
Reassembly is simply a reversal of the above procedure........!
Dude this video makes me really want this drone. No joke! Everything is so tighty! so nice and easy to work on, God for bit she falls from 1100ft in Philly? Lol lol. Not like DJI drones where you need to be an alien to work in them! Thx Wayne! How's the distance and dependability on this WiFi Drone? Better or worse then the Mavic air? Thx bud!
Parrot is the Chevrolet of the drone world!
PhillyDroneLife hey Philly. I don’t fly my Anafi anywhere near WiFi spots but say she’s about on par with the Air for range.
where can i get all the four Parrot Anafi Drone OEM Shell ARMs to buy
While watching this video I noticed that your drone has 2 less screws than mine and I am wondering what the purpose of them is.
At :23 above where the battery plugs in you can see it is just smooth and flat next to where the battery clicks in, but on my Anafi there are actually screw holes to the left and right of the slot the battery clicks into. When I remove the GPS plate cover though I can see that they do not actually screw into anything at all, and are just kinda sitting there in the holes. Wondering if you have any idea what purpose those screws have, and why your unit does not have them?
Maybe an updated model
Very good video guys. Could you do a video on disassembling or replacing the gimbal and or the camera?
just search youtube
@@tdrdronesebikesandscooters8377 thanks guys, will do
what are you repairing exactly?
Thanks for this video! I had a crash with my anafi, thank God I was able to restore it and it works fine. Only thing is not working is the blue light, after watching your video I went ahead and opened it to see if the connector to the light module was still attached, and it is, but it just do not light up. Do you think there's a shortcut like a reset or should I try to order the light module from Parrot? Thanks for your help!
Anything could be causing that light failure, A Front light burned out on my Yuneec Breeze, i took in apart and never could figure it out. As long as it flies ok i would not worry about it.
I agree with you!
I can't turn off the battery when the battery is connected to the drone. The only thing that turns on is the blue light at the bottom. I think it is the circuit board? What else is going on? Any suggestions would be great.
These batteries have a high failure rate, be careful. I would just get a new one and scrap the old one
@@tdrdronesebikesandscooters8377 I got a new battery and it was the same result. It is not the battery. Thanks.
What can I do if my anafi shows a "vertical camera failure" message? Do you think is just a bad connection between then vertical camera and the main board? Or is necessary to take it to the technical services?
Did you crash?
parrotpilots.com/threads/vertical-camera-failure-after-crash.841/
No, I didn't crash it, the message just showed up.
I already try all the resets and calibrations that shows in the app and in the manual, but still doesn't work that's why I think it's something whit the hardware.
So what you do Esteban, obviously that thread gave more questions than answers. I messed mine up months ago due to a crash and idk if Best Buy covers warranty under a year I obviously won’t tell them I crashed. I’ll just use the, I updated firmware and now it doesn’t work exuse. I also didn’t buy the insurance. I can’t even buy the part and replace it. Hope you answer. Been a while.
@@richardaguilar8582 My drone (Anafi) has fallen and the battery dropped out. He then writes that: “Vertical Camera Failure”, and it doesn’t fly.
I bought one new vertical camera, i installed it, but problem is the same, doesn’t fly. I have two things in mind:
1. Vertical camera identification error (software error, no system shutdown correctly, because the battery dropped out when crashed - solution: firmware reinstall, I'm waiting when Parrot release new firmware)
OR
2. Mainboard error 🙁
Hi, my anafi crashed and a gimbal connection got disconnected. I took apart the drone and put everything back together but now its showing a "no sd card" error. Any idea on what could it be? I've tried everything I could think of. Thanks in advance.
Did you ask on the parrot forums. That's where you need to start. it could be a battery connection because the wires to the sd card run through the battery.
I have the same problem! I have switched the motors after my ANAFI crashes :/ After my repair the drone can't detect my SD-Cards. Same Error... Did you solved the problem ?
この動画を参考に破損したアームを交換することができました。
so easy but first remove propellers
What exactly is she repairing?
Funk Chunk She is changing the motors.
this is great, but nobody sells parts in the US ... and they won't ship here from EURO countries either --- UNACCEPTABLE !!!
Join the conversation at parrotpilots.com/forums/anafi.6/
I'm taking a youtube break
why publish a clone of the original video made by parrot ?
*** dlVPfUAOkBE ***
Because some people never go and check Parrots page
@@tdrdronesebikesandscooters8377 i think this is copyright infringement 😒