Ammo Casings and Resin.. A Screw Driver Handle
HTML-код
- Опубликовано: 28 авг 2024
- Lets make a screw driver handle out of resin and Ammo casings ! 9mm's, 380's, 22 mag's, 40's,45's,223's and one 357 mag !
It's not real practical but it's SUPER COOL.
Sponsored by Total Boat and Jamestown Distributors
Find them here. use PROMO CODE POHLBARN for 20% off
totalboat.com or jamestowndistributors.com
resin I use
www.alumilite.com
www.resin4art.com
totalboat.com or jamestowndistributors.com
Yorkshire Grit and Hampshire Sheen
www.thewalnutlo...
Find Us Facebook Page
/ pohl-barn-productions-...
Find us on Etsy
www.etsy.com/s...
If you find the need to send me something send it to...
Pohl Barn Productions
PO Box 121
Olivet MI. 49076
Email me at
Dougmoore670@sbcglobal.net
The new lathe
Nova Galaxi DVR 1644
Where I get my lumber, materials and tools.
The Workbench and or LL Johnson's Lumber
www.theworkbenc...
Music
A license to use the following media was purchased under Pond5's Content License Agreement, a
copy of which is available for review at www.pond5.com/.... The Pond5 license
authorizes the licensee to use the media in the licensee's own commercial or non-commercial
production and to copy, broadcast, distribute, display, perform and monetize the production or
work in any medium - including posting and monetization on RUclips - on the terms and conditions
outlined therein.
MEDIA TITLE MEDIA TYPE CONTRIBUTOR DATE PURCHASED LICENSE
Hybrid Trailer (powerful epic and action cinematic background) 76574309 Music AShamaluev 2018-12-04 Individual
DISCLAIMER
Please note that my channel is for entertainment purposes only. You should NOT rely solely upon the information and techniques discussed and displayed in my channel.
I am not a professional woodworker or woodturner and working with machinery can be dangerous.
It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.
#resinart,#woodturning,#totalboat,#starbond,#woodworking,#bowlturning,#bowlmaking,#Lathe,
#maker,#michiganwoodturner,#mittenmade,#NovaGalaxiDVR,#DIYwoodturning, #epoxyresin,
#woodandresin,#woodandepoxy,#woodworker,#HarborFreightPressurePot,
#resincasting,#DIY,#diyabrasivepaste,#shinejuice,#CastersChoiceMicaPowder, #PearlEx,
#abrasivepaste, #mylandssandingsealer,#CactusJuice, #alcoholink,#pressurepot,#foryou,#howto,#pureMichigan,#pewpew,#casings,#ammocasings,
#screwdriverhandle,
Would of been a Badass shifter.
It still may be, as soon as I make another to put in the Model A
Was going to say the same, would make for a nice shift knob
Definitely a bada$$ shifter idea
yoooo thats what im saying i was lookig throuh the comments to see if someone said that already
Yes, but with full bullets
I know most people don’t want to be bored but I’m a believer that seeing the mistakes that others make saves me from making the same or at least how to deal with thank you for sharing your knowledge
Thank You ! I think mistakes should also be in a project, it helps other realize we all make mistakes and to not give up, work through them and finish what you started.
I'm with these guys, I want to see your process of creating the pieces that you do. That includes all your goofs and "mistakes". Keep em coming!
Thank You...
Awesome
Not many people learn from others mistakes sometimes I don't learn from my own
Those would make awesome shifter knobs especially for a rat rod.
Yes they would !
great idea. Someone with the skills and tools can make some money selling those.
House of Speed has them.. Used to be a guy named Rip that was doing Lokar Knobs and I can't find him any more... Only been 10 yrs....
Nice work. You clearly know what you are doing.
Thank You ! Nope I was winging it, first time I've turned brass
i want to make a shift knob for my car with some shell casings that my grandfather gifted to me when i was younger since he helped me buy that car months before he passed away
Oh man, I would love to gift my hubby with a set of those. He would be the coolest dude at work & I would get some serious kudos.
My husband, a former SeaBee, and trained Diesel Mechanic, would LOVE a set of these in Phillips and Flat! Great job!
-Ellen
i have not shot a gun in years..have never operated a lathe..but found this video..and result..very satisfying to watch...
Thank You !
Love it, great idea to color the insides, the contrast is awesome. You've given me some ideas for future projects, thank you.
Thank You
I'm amazed it cut those casings!
Wow, nicely done. 👍 I know what you mean being surprised by how hard it was to cut the through the casings. I told our ten year old to put what he wants in his ferro rod handle epoxy casting and rather than add pine cones and fatwood he added a few pennies. I didn't think the pennies would be too hard to cut through lol. You had me curious on this one. I was going to try it.
That Red Color made them look way cooler than it already did
Thank you Jeff
@@PohlBarnProductions No problem! thanks for these great videos!
Going to make one for a rifle cleaning rod!
That was suggested to me by the guys at the gun club, I'm sure it will look Awesome !
That is one of the coolest things I’ve seen! Great work! Thanks for sharing.
Thank You !
I just love how the process creates a cross section of the bullets just by scraping layers off with the lathe.
Thank You ! I think that the coolest part also, kind of like a cut away of an engine.
That. Is. Absolutely. AWESOME!
Thank You Tim
that screw driver just increased in value by 2000%
Thank You
Thank you
Offer me that and I'll be making another ! LOL
its a treat to eyes watching u creating those amazing things ... love n respect from pakistan
Thank you Fayyaz
If only there was a "Wow" button. That just blew my mind. Turned out awesome
Thank you Thank you
@@PohlBarnProductions Watched most of it in absolute dread to be honest! I was full sure you were gonna wreck your tools/lathe or both. Only realised today that yt had unsubbed me from your channel. How very dare they! I didn't miss any videos though cos I have been on the lookout for your uploads. Just wasn't being notified. Sorted again. Would hate to miss any.
This is an interesting idea. I'd be interested to see a version done where the first cast was narrower - then this cast was put into a second fatter cast of resin so that when turning the screwdriver handle's on the lathe there would be a buffer zone of clear resin and the shell casings would remain intact behind this at the finish.
Thank You John, that's an Idea, I was after the cut away look when I turned this,
The Pohl Barn Productions Thanks for responding. Yep, I figured you knew what you were doing :) I wonder what you’ll do next!
Looks fantastic. It might be better as a cane handle 👍. I know I’d buy it😎
Thank You, well that was a snap on screwdriver and dad wasn't happy about the handle rotting off, it worked out great for it, as it could for many other things, shifter knobs, cane handles ect.
@@PohlBarnProductions ...something to put in her butt, etc.
you should make a doorknob out of this!
Hey I just happened to be sick and couldn't sleep and I saw your video and is amazing. Love tools and u should make the for sale.
Thanks for getting my spirit back up!!!
Thank You... and you are Welcome, hope you are feeling better soon !
At least I am watching this during the day, at work, instead of 1am at home....
Thank you
You do great work, you are one creative individual, I'm excited about these channels with all these lil amazing gifts that I'll be destroying till I'm good enough!! Hey God bless you bro!!
No mistakes - just happy accidents! (Hopefully happy ones anyway)
You deserve 1 million subscribers
Thank You Steffany !
Agreed 🔥
Eu adoro esse cara,ele parece ser muito gente boa,deve ser daqueles que faz churrasco em casa e ninguém precisa levar nada ,ainda compra cerveja boa pra todo mundo.
Esse cara é incrível.
Thank you
I have never come across another site with as many people commenting regardless of whether they are for or against. You definitely attract a large albeit polarized audience. I like your ideas and style. Best regards ROSS
Thank you Ross, not everyone has to like what I do or make, most of them have their own taste some are just tasteless, that's a nice way to put it, but either way it's a view and helps my channel if they comment. so it doesn't really bother me
357, 45ACP, 40S&W, 22Mag, 223, (but why would you have 9mm when there's a 40 or 357 handy)-you're speaking my language now! (Born and raised WY, those numbers mean more than telephone numbers) Might have tumbled them a bit to get them pretty, but the handle turned out awesome! And for the naysayers, carbide is far harder than brass...just sayin'. Fantastic idea!
well the 40 belongs to my son in law, and the rest are pricey to just throw down range, 9mm's are cheap ! I thought about tumbling them after the fact, did I miss what the naysayers were sayin ? I knew I could cut the brass with the carbide I just didn't expect the brass to be that hard, I should have run the lathe faster than I did. Glad you liked it, it really was an experiment that turn out Great I think.
Like, when you say something such as "carbide is far harder than brass" my brain completely agrees. Yet my thought watching the video was "Man, he better watch out for that metal". lol, weird how sometimes it just doesn't click.
@Azhaar Laghari Because I own a 45 & 40, both of which have more kinetic knock down power than a 9mm. Have had 9's-have no use for them. Personal preference-if you like the 9mm platform, good for you. I prefer the 45 & 40-is what it is.
@thomas lee good old 40 short & weak. Most LEO's and Feds have gone back to the 9mm as better generation of bullets than when the short and weak came out. Now 10MM is where it is at for the non-pussy feds.
I've put my 40 up against a 9, and it's by no means weak. If I feel it's not enough, I'll carry my 45. As said, you're entitled to your opinion-doesn't mean I have to agree with it, nor you mine.
Make the resin in the shells red,white,and blue
Merica 🇺🇸
The Netherlands 🇳🇱
@@dewbloemen6722 L
Or just blue
Russia 🇷🇺
That one was awesome! I sent to my bro which would want me to make him one. I not ever used resin yet. Very nice! Thanks!
Thank you
Well that was awesome!
One of a kind.
Any gun enthusiast would love to have one but in stead a gun barrel cleaner.
I for one!
Truly awesome!
Thank You ! it was a gift for my Dad, that was a snap on screwdriver and the handle had just disintegrated in the tool box, I would be cool for many things, shifter knobs, knife handles, gun grips, the casings were really hard, trying to anneal them so I can try again with a different project.
That be a cool shift nob for my truck
TZMG VISION Yea right next to your swastika flag
Man, that was very, very cool!
Thank you !
One of the all time coolest videos I've watched on RUclips!!
Thank You....
That's a real project tool! Someone will keep that a long after your gone brother!
You got that right!
Would make an awesome shifter for a rat rod ppl would pay good money for that I sure would. Great job
Thank you ! Yes it would, and it seems many think the same thing.
Within 30 seconds of watching I subbed 👍🏻
Thank You and Welcome Aboard
that is really cool, you work with so many different items ...ty Anna
Thank You Anna
I've heard of policing one's brass but that's a whole new level of it.
3:50 looks like that scene from Jaws where he's burning the wax and loading his gun
lol
Фигасе резец и метал режет и эпоксидку! Вещь оригинальная!
Thank you
дак латунь она мягкая , вот если бы стальные были гильзы то да , а так это не сложно
аккуратно вполне можно
Металлокерамика...
Olken Henry х
Great beautiful screwdriver handle. I wish I could make something like that wonderful video.
Thank You Thank You
Мужик красавчик. Получилось супер. Спасибо за видео . Удачи Вам!!!!
Thank You
Neat idea, I bet a 12 or 10 gauge shell suspended in the tube center would look cool too!
Thank You ! It would and would be easy enough to do, I've put 410 shells into ink pens after casting them in resin.
Large diameter handles let you get lots of torque...... long screwdriver shafts eat up torque.
Thank You, I'm sure my Dad is never going to use that for anything other than to show it off, and the handle is the right size for his arthritis .
always used the long screwdrivers to spin the shank fast with my finger tips. if the length of the driver is causing serious torque problems you're probably doing something wrong. phillips is trash anyway.
+firebirdude2
actually long screwdriver shafts don't eat up torque. The reason for this is torque is in units of force times distance, but the distance of course is not distance along the axis of rotation (the screwdriver shaft) but instead distance away from the axis. This is one reason screwdrivers have handles; the bigger the handle, the more torque to the shaft is provided by a given force. Not the length of the shaft.
As a multi-caliber shooter , l love this grip , as a fan of resin Turner channels , l love the quiet shout out to Nick , with the Yorkshire grit . Stat healthy , keep posting .
Thank you Richard,
A handle any gun owner would purchase. Its chunky size is great for we elders with joint pain. Great way to recycle using the spent bullets.
Thank you
looks great brother thats one hell of a long screw driver . good job buddy .
Thank You ! It was my Dad's for what ever reason the handle desintegrated in his tool box. Snap on tools are expensive, but try to get it replaced if you didn't buy it from that guy. Not Happening.
@@PohlBarnProductions well it is a lot better then it was for sure and a one of a kind piece . i think you did your dad proud with it and it will last forever now. well as long as you dont drive over it with a big truck lol . again great job my friend .
still i think a shifter would be cool ... maybe next project ...
lol thank you,, yes I am going to do a shifter for my Model A, I'm working on that now.
I enjoy your resin turnings quite a bit. Have you ever considered using empty walnut shells that squirrels have emptied? Your vacuum chamber technique would do a great job of minimizing air pockets and the intricate shapes of the shell structures would leave very interesting patterns I think. Just a thought. Keep up the great work!
Thank you Ben, that's an Idea, although I am using a pressure pot, but I understand where you were going with it.
My truck needs a shifter knob along with headlight and radio knobs. Looks great man!
Thank You !
i like the idea of the red epoxy in the brass, but now im curious as to what it would look like if it was all clear.
Thank You ! It probably would of been dirty as I didn't think to clean the casing before I poured the resin.
But why? either way your attention to detail is commendable;-) Great work✌️👌🖖
FOR A FIRST ATTEMPT MATE I THINK YOU DID A BLOODY GREAT JOB AND YES I LIKED THE IDEA FROM VICTOR FOR A GEAR SHIFT KNOB , REAL NICE .
Thank You Ean, I have to anneal the casings first to soften them up for easier turning, I plan to make one for my Model A.
I couldn’t stop watching. Great work Sir! Great Work!
Thank You Kym
be a great shifter knob
Dude... That is simply kick-ass
Thank you !
Impressive and astonishing! My father, who was a mechanic would have loved this!
Thank you Becky
“I’m not going to bore you with any of that”
Hah, like drilling the hole. That joke was pretty cutting edge. It’s really drilled into my mind.
lol until now I hadn't even noticed it as a joke, but you're right that is pretty funny .
okay... NOW i want to make resin .22lr grips for my berreta 21....
I thought about knife handles, but I'm not so sure the casings will stay in the resin while cutting them that thin,
@@PohlBarnProductions i would love to see that tried even still. I feel if maybe you used .22lr casings and layed them flat along your path of cut they may stay within the resin for the most part.
How much did you shell out on resin
This is the best dam looking screwdriver I have ever seen in my life!!!!!!! GREAT JOB!!!!!!!!!!!!
Thank You !
That's rad. A pistol grip or shotgun butt made in that fashion would be next level! ⛽🔥
Shot gun stock would be Heavy as Hell, I did think about grips for a 1911 though
Damn, that's a really cool screwdriver.
Thank You
Buenísimo compañero,me gusta mucho tu canal,saludos 😜
Thank You...
Dvfcvcb.
Hola, me no speako taco
Eggy Boi this “taco” you don’t speak is actually spoken globally
Awesome project
Shifter knobs for rat rods and bobbers
Thank you ! YES !
That is one of the coolest handmade things I've ever seen I'm a gun guy and would love to have a shifter knob like that
Thank You, I've been thinking that also. it would be hard to mass produce them as they shifters all have different thread pitches. but for a personal project one just might end up in my Model A, LOL
or may be a handel grip fora pistol
I watched you make this for over 15 minutes and you didn't even screw in anything with it
Thank You ! LOL I never thought about it, I made it as a gift and hadn't actually planned on using it.
It's the best handle EVER ! ! ! ! ! ! LOVE LOVE LOVE
Thank you Lynn
Wowza! Love that handle. It truly looks amazing! Great job! Bravo!
Нихуя не понял , но очень интересно.
Thank you
hahahahahaha
хули там понимать)))взял тюбики от губной помады,залил эпоксидкой,и получилась рукоятка для отвёртки)
@@user-hh1tl7bd3h на изи
Me too bro. I didn't understand this project at all.
I can use that to.....😈
gotta be the coolest screwdriver handle ever made 😎
Thank you
That was absolutely amazing
Thank You...
Obrigado pela dica...em meu bairro temos MILHARES dessa esparramadas ao chão diariamente e já estamos sem idéia doq fazer com elas...gosto de meu presidente mais ele pretende liberar as armas e assim teremos mais ainda...Espalharei a idéia é faremos ENORMES Tortem de resina. 👍Like !!!
Leandro Nunes você é do Rio?
Столько ебатория,чтобы украсить сраную отвертку?!...
That is bad ass, old school ingenuity, great job old man...
Thank you JP.. LOL I'm NOT OLD ! LOL
I always tell folks when they ask me about my long screwdrivers, thats my Monday morning screwdrivers, for when you don't want to get too close to your work.
lol I'm not even sure he's even used it more than once or twice, the handle disintegrated in the tool box.
uses as chisel, loses non-dominant hand.
Would be interesting to see a patriotic theme of the casings filled with resin in Red, White and Blue.......good work.
Thank You Glenn, I do have one in my library, Shifter knob, Ammo casing in resin
I'm restoring my grandfather's chisel set. There is a lot of them, and none of the handles are salvageable. I think I just might have to give this a try. Thank you for sharing.
Thank You... The casing are really hard, they can be turned like that but I probably should have aneiled them first to soften them up then tumbled them to clean them. Your call on how you want to do it,. Good Luck
This is really relaxing to watch.
Thank You
A driver fit for every mans tool box nice love to have one my self
Thank You
That is awesome! It would great shiftknob too!
Thank You ! Yes it would !
Beautifully made. I like the effect of the red filling in the casings.
Thank you
Great idea! Boring part wasn't the lathe process but rather the first 3.5 minutes. After I skipped ahead the rest of process was informative and interesting. The result was very good.
Thank You
Не перестаю восхищаться Вашей работой и идеями!!!!!Супер!!!!
Thank You ! I'm glad you like it.
Wooooow !!!!
Se ve increíble y el toque de resina roja le dio mucha vista !!
Thank You
One of the prettiest screwdriver handles I've ever seen! Nice work!!
Thank you !
The Pohl Barn Productions No, thank YOU! It turned out amazing, I enjoyed watching, and it gave me some ideas with spent casings and resin that I've been wanting to do for a while now. Thank you again, good sir!!
That’s the perkiest screw driver I have ever seen. Nice job!
LOL Thank you Debbie
Hey Sir, Fellow Michigander here. (Grew up in Vermontville, live in Detroit-metro now).
Why do you place the epoxy in a pressure chamber? What is the advantage?
I had thought about a vacuum chamber to draw out air bubbles in thicker castings.
Sorry for the dumb question; this is a new venture for me. Thanks for your time, and for sharing your projects!
Thank you Tim, LOL I went from 8 and woodward ish area to Charlotte. and I'm never going back ! um to control exothermic reaction and to compress any of the smaller air bubbles until the resin sets up and hardens, vacuum isn't fast enough to remove the bubbles before the resin sets up, there are resins specifically for vacuum chambers then cook it to cure it then pour it and put it into a pressure pot, LOL
FANTASTIC! I wonder, do young kids get the opportunity to take wood shop classes these days? My Jr high school had shop classes; I can appreciate craftsmanship like this because I attended them.
Thank you ! No they do not and that's horrible, I went to shop class, wood, metal, machine and auto. kids today know nothing about anything like that, not all of them but most.
In Canada it’s mandatory for all kids to take industrials arts/ technology education in grades 6,7,8. Can be woods, metals, graphics etc. whatever the middle school facility has.
@@PohlBarnProductions : What part of Michigan are you located in?
Thats badass this channel is the coolest thing I ever seen on youtube
Thank you. Now that means a lot to me, It's been a rough road doing all of this. Thanks again
Doug
I really like that you filled the casings with resin first! So many makers skip that step and then are dismayed by the air pockets. Cool effect!
Thank you Amber, there are a few things that others do that make me wonder but then again I'm sure they also wonder about what and how I am doing it. Pencils being one of them, everyone of them fight with the lead coming out, but not one of them stabilized the pencils first, via Vacuum chamber, but hey that's just the way my brain works, Glad you liked it and thanks for watching.
So you woke up and thought, "I'm gonna make a screwdriver handle out of shell casings." Thank you for relieving me of concern for the strangeness of my mind. Came out beautiful, nonetheless.
Glad to help, actually I need a quick project in a pinch and that's what I came up with, thanks again for watching STephen
@@PohlBarnProductions Actually, I came up with an idea of something for you to turn. What was it? Augh! Should have written it down. It'll come to me.
That has to be the coolest screwdriver in the shop. Nice work.
Thank You
That is downright gorgeous! Love the creativity. I'd love to have one of those in my box. A+
Thank You
Absolutely gorgeous.
Thank You