Thanks for this, finally getting some useful feedback on the throttle and I can feel the when the wheels are about to lock when braking. Other profiles just didn’t kick in hard enough or early enough so weren’t very helpful to let me know when I’m at the limit. Amazing!
Thank you so much, you saved my sanity! The part about different profiles fixed all my issues. Could not work out why nothing much was happening. Great video, cheers.
@@nicholasdoerner3735 setting them up on Simhub is more tricky however it’s not even comparable to native support. The native support does nothing to make you faster, maybe slightly immersive but generally annoying. These settings give you so much more confidence in the car, I’m genuinely shocked how useful they are
Cheers for getting me started off. The frustration i'm having is I can't feel if i'm locking an inside wheel. It stops rumbling but I still have a wheel very much locked.
Yeah unfortunately iRacing doesn’t work with wheel lock, there’s no effect when the wheel is locked just when it’s beginning to lock. No settings will fix this, sorry I can’t help that
Ye good settings for the pedals it works great the issue for me is where all them gains and stuff are etc I think it controls all motors commonly so my haptic seat pad now doesn't do shift changes and curbs etc?
Great video, what would you suggest if I’ve only got the one haptic reactor and drive formula cars. Which route should I go down (place on the reactor on throttle or brake). I’ll end up getting a second like you did haha but in the meantime what is most beneficial?
It really depends, if you drive with ABS and traction control then it’s probably go on the brake to feel the ABS effect. If you drive cars with no TC and lots of power is go on the throttle maybe so you can feel the soup in the car. You can always try both by just swapping it over 👍🏽
Hi, thanks for taking your time to do the videos, i have a question, the wheel lock is not supported by iracing at the moment, i dont know if you make it work somehow, the feelling i got from your tunning is a bit odd, my braking vibrator also stayed on with a little vibration, something like replicating the engine vibration of the car, i only have 2 filters on, i dont know if this is normal, do you have any of this issues? thanks
Yeah sounds like you have the setting on in iRacing for the Simagic haptics, turn that off in in iRacing. Wheel lock won’t be supported so the way it’s setup is to just give you reassurance when you’re hitting the right amount of brake pressure and stop you going straight in lot locking up
Hi! Thank you so much for configuring SimHub for my Haptic Pedal Reactor. Please tell me if you have a vibration motor triggered when braking by about 5-10%?? With such braking (5-10%), the wheel lock does not exactly occur, as soon as I press a force of more than 10%, the vibration stops. And then it already works when the wheels are really locked.
@@TerriblyRacing Yes of course, im the setting turned off in iRacing. Thanks for the help, I will deal with the SimHub settings, You gave me the necessary boost)))
I had another hidden setting that was completely wrong but I couldn’t fix it, I reinstalled Simhub and they fixed my problem but had to reconfigure the settings to get the same feel
I don’t know for sure. But there’s lots of modders that make 3D printed mounts, have a look online I’m sure someone can help, If not the p1000 or HE pedals are both great, just know the p1000 has the logic board and mounts already so only need the motors and the power supply!
You used the Porsche cup settings and didn’t understand the vibration, on which pedal, the accelerator? The Porsche cup car has crazy power and I need to know very early when the car is spinning. It’s a lot of preference so you might enjoy the settings but feel free to mess around with them
@@TerriblyRacing Sorry my english is not so good, i was trying to ask If you dont use Wheel slip, its a effect in simhub. About yours setting, i think ITS perfect and i Will try that asap
Hello, I asked in the previous video but no answer, so I try again, what is the Pulse Duration you set in the ABS ACTIVE Effect (it's used for the GT3/GT4 in iRacing)
Unfortunately I haven’t but you can try the default and the Porsche cup settings and have a mess around until you find something you like, those cars have TC and ABS right? Although you can’t use traction control in SimHub on iRacing because it doesn’t share the data. If you want to message me on discord we can try and figure out some settings for you
Unfortunately I havent raced in AMS 2 but I’d definitely make adjustments, I’m pretty sure AMS has a lot of slip angle so you might want to increase the threshold
When I go to ShakeIt Motors and toggle on Simagic pedals, mine say “disconnected” instead of showing “connected” as yours do. Any ideas of what might be wrong?
main question is, can i have simagic software running too ? i got base and wheel from them too, wouldnt it mess up with settings for the haptic on simhub ?
@@TerriblyRacing Thanks, also I only use 1 motor on break pedal but it keeps giving me feedback on wheel slide too ? In simhub i only have abs and wheel lock setting enabled ... would it be an Iracing thing ? that it gives wheel slide telemetry in line with wheel lock ?
@@TerriblyRacing As a late add on to both of these comments, I believe it is important to turn off the effects of the motors in the Simagic SimPro Manager 2 software so that they can be fully controlled by SimHub without issues.
@@andrewskordilis9033 I’m not 100% sure however if you want me latest settings I have them available to download on my discord. If you join the discord through the video description you’ll find the settings there. Discord may not be in this video but if you go to any of my live streams it will be in the description 👍🏽
i installed the motors on my pedals and they test ok in simhubbut once i get in the car in iracing the brake pedal has a slight vibration siting at idle and i Feel very little when the wheels lock and even when i test the motor while in the car i Feel little to nothing. the throttle works Fine in game and tests in game ok but the brake does not work, as soon as i leave the car it willl test ok again,any idea whats going on?
@@TerriblyRacing thank you so much!! I was a little concerned about leaving the gain levels in simhub at 100% but the way you setup the gradual increase is amazing in f4! only been on iracing for like a month and done like 7 fixed f4’s but just got my first podium with these settings!
Great. I set up these shakers on my fanatec pedals, and now I can't get my wheel and pedals to connect to the simulator. I've disconnected the shakers, and now my sim is unusable. I have no idea what to do. 🤬
@TerriblyRacing I'm on a cyberpower pc. I'm on iracing, and the shakers are connected to my pc through the simagic control module. I got it all set up, and it worked for about a lap, and then I lost all connection from my fanatec dd1 wheel and pedals. I couldn't even exit the sim, had to shut down the pc to get out. I don't know if it's something in the simhub software, or some other tech issue. I've checked the connections several times. Any suggestions?
Any else found that since changes to porsche cup car this week, the haptic doesnt kick in as quickly when locking brakes? Do i need to adjust settings from the profile detailed here?
Yeah please feel free to adapt the profiles to all the other cars or updates. Sounds like you might want to reduce the threshold but have a play and see what suits you 👍🏽
@@patsollom so I’ve looked at settings there’s nothing you can change to make them kick in sooner, since things to check. Under motors output is your wheels lock setting and brake setting both at 100%, Also within effects profile, you can increase the input gain, maybe to 700, and also increase minimum force to .65. These should help a little, if you can get the full licence for SimHub that would also help 👍🏽
Thanks for this, finally getting some useful feedback on the throttle and I can feel the when the wheels are about to lock when braking. Other profiles just didn’t kick in hard enough or early enough so weren’t very helpful to let me know when I’m at the limit. Amazing!
Thank you so much, you saved my sanity! The part about different profiles fixed all my issues. Could not work out why nothing much was happening. Great video, cheers.
wow quick work! thank you for the explanation. simhub is pretty intimidating for someone new like me.
Yeah it can be handful, when you spend some time with it you’ll get used to it, any questions ask away
Amazing! Thank you. Just what the doctor ordered!
No problem, let me know how you get on!!
Superb mate, now I can get it out the box and get fitted 😂
That’s mint, let me know how you get on!
How do you feel setting these up through simhub compares to the native support through iRacing?
@@nicholasdoerner3735 setting them up on Simhub is more tricky however it’s not even comparable to native support.
The native support does nothing to make you faster, maybe slightly immersive but generally annoying.
These settings give you so much more confidence in the car, I’m genuinely shocked how useful they are
Cheers for getting me started off. The frustration i'm having is I can't feel if i'm locking an inside wheel. It stops rumbling but I still have a wheel very much locked.
Yeah unfortunately iRacing doesn’t work with wheel lock, there’s no effect when the wheel is locked just when it’s beginning to lock.
No settings will fix this, sorry I can’t help that
Great stuff, thank you very much!!🎉
Glad you enjoyed! 👍🏽
Ye good settings for the pedals it works great the issue for me is where all them gains and stuff are etc I think it controls all motors commonly so my haptic seat pad now doesn't do shift changes and curbs etc?
Fantastic work!
Thank you very much 🙏
Awesome video! Thanks!
No problem, glad you enjoyed!
Great video, what would you suggest if I’ve only got the one haptic reactor and drive formula cars. Which route should I go down (place on the reactor on throttle or brake).
I’ll end up getting a second like you did haha but in the meantime what is most beneficial?
It really depends, if you drive with ABS and traction control then it’s probably go on the brake to feel the ABS effect.
If you drive cars with no TC and lots of power is go on the throttle maybe so you can feel the soup in the car. You can always try both by just swapping it over 👍🏽
Great stuff - really helpful. Have you done any setups for cars with ABS?
ABS can’t be tuned it’s either on or off so nice and easy to set up, just pick your duration
@@TerriblyRacingof course! Thanks for the response!
Hi, thanks for taking your time to do the videos, i have a question, the wheel lock is not supported by iracing at the moment, i dont know if you make it work somehow, the feelling i got from your tunning is a bit odd, my braking vibrator also stayed on with a little vibration, something like replicating the engine vibration of the car, i only have 2 filters on, i dont know if this is normal, do you have any of this issues? thanks
Yeah sounds like you have the setting on in iRacing for the Simagic haptics, turn that off in in iRacing. Wheel lock won’t be supported so the way it’s setup is to just give you reassurance when you’re hitting the right amount of brake pressure and stop you going straight in lot locking up
Hi! Thank you so much for configuring SimHub for my Haptic Pedal Reactor.
Please tell me if you have a vibration motor triggered when braking by about 5-10%?? With such braking (5-10%), the wheel lock does not exactly occur, as soon as I press a force of more than 10%, the vibration stops. And then it already works when the wheels are really locked.
What car and sim are you using, you might need to tune depending on your settings
@@TerriblyRacing i am used F4 FIA in iRacing sim
I'm using your setup in SimHub for the F4 FIA formula
@@user-kx8oe4ex9g no I don’t have that, do you have the setting turned off in iRacing?
@@TerriblyRacing Yes of course, im the setting turned off in iRacing. Thanks for the help, I will deal with the SimHub settings, You gave me the necessary boost)))
Can you Maybe share your Settings ? I m driving SF23 and they diddnt have Abs or TC, can i make IT with wheel Slip and lock :) ?@@user-kx8oe4ex9g
Curious: your cup car settings are really different than the previous video. In general, why? Just further experimentation and knowledge?
I had another hidden setting that was completely wrong but I couldn’t fix it, I reinstalled Simhub and they fixed my problem but had to reconfigure the settings to get the same feel
Think there’s a way to put these on my csl elite v2? If not, should I get the HE sprints, p1000, or p2000?
I don’t know for sure. But there’s lots of modders that make 3D printed mounts, have a look online I’m sure someone can help,
If not the p1000 or HE pedals are both great, just know the p1000 has the logic board and mounts already so only need the motors and the power supply!
Amazing vídeo, you dont use Wheel slip ? I tried in Porsche Cup, but o didnt understood the vibration from this
You used the Porsche cup settings and didn’t understand the vibration, on which pedal, the accelerator? The Porsche cup car has crazy power and I need to know very early when the car is spinning.
It’s a lot of preference so you might enjoy the settings but feel free to mess around with them
@@TerriblyRacing Sorry my english is not so good, i was trying to ask If you dont use Wheel slip, its a effect in simhub.
About yours setting, i think ITS perfect and i Will try that asap
@@RohMoraes12 oh I understand, I don’t like wheel slip, I have tried that effect and it wasn’t good to me.
Traction loss is the best for me 👍🏽
Hello, I asked in the previous video but no answer, so I try again, what is the Pulse Duration you set in the ABS ACTIVE Effect (it's used for the GT3/GT4 in iRacing)
I use 80ms but I’m not using cars with ABS much so sorry if that’s not too helpful
Sorry I missed your comment in the last vid, I have a discord now if people have more questions, it’s linked in my latest video
It looks like you have a haptic motor on your clutch. What are you using that for?
@@chestermoney3 sorry Chester I don’t have a clutch pedal, so no settings for clutch
whats the checkbox :only when pressed meaning?
The effect won’t vibrate unless the pedal is pressed, it will only be able to turn on after you’ve reached whatever % pressed you’ve set
Would this work for any sim (ex. EA WRC)? Works for me in ACC but don't get any in WRC.
I can’t say, I know it works for me in the 3 sims I own, if you join Simhub discord someone might know there
@@TerriblyRacing Can you send the discord link, pls. TY
@@jgloc25 just Google Simhub discord and it’ll will invite you
Do you have traction loss settings for GT3 like Ferrari 296?
Unfortunately I haven’t but you can try the default and the Porsche cup settings and have a mess around until you find something you like, those cars have TC and ABS right? Although you can’t use traction control in SimHub on iRacing because it doesn’t share the data.
If you want to message me on discord we can try and figure out some settings for you
Would you use the same settings for Assetto Corsa, Automobilista 2 etc. or make any adjustments?
Unfortunately I havent raced in AMS 2 but I’d definitely make adjustments, I’m pretty sure AMS has a lot of slip angle so you might want to increase the threshold
Default settings work just fine for me
@@dealscale have you tried any of these settings, I’m guessing not as you’re missing out, big time!
When I go to ShakeIt Motors and toggle on Simagic pedals, mine say “disconnected” instead of showing “connected” as yours do.
Any ideas of what might be wrong?
You have them plugged in with the power supply and Simagic control board?
main question is, can i have simagic software running too ? i got base and wheel from them too, wouldnt it mess up with settings for the haptic on simhub ?
No Simagic made the haptics compatible with Simhub, everything still works you just get the added functionality of the features through Simhub
@@TerriblyRacing Thanks, also I only use 1 motor on break pedal but it keeps giving me feedback on wheel slide too ? In simhub i only have abs and wheel lock setting enabled ... would it be an Iracing thing ? that it gives wheel slide telemetry in line with wheel lock ?
@@MrMatek180 sounds like you need to turn off a setting in iRacing. In iRacing turn off haptic motors and that should fix it
@@TerriblyRacing As a late add on to both of these comments, I believe it is important to turn off the effects of the motors in the Simagic SimPro Manager 2 software so that they can be fully controlled by SimHub without issues.
is the Pcup profile setup the same still since the update since you cant really brake above 65% now? thanks mate
@@andrewskordilis9033 I’m not 100% sure however if you want me latest settings I have them available to download on my discord.
If you join the discord through the video description you’ll find the settings there.
Discord may not be in this video but if you go to any of my live streams it will be in the description 👍🏽
Can you use this with simhub and then also have buttkickers for iracings default lfe at the same time?
Yes you can 👌 they are two seperate channels so you can get both of the feedbacks🎉
i installed the motors on my pedals and they test ok in simhubbut once i get in the car in iracing the brake pedal has a slight vibration siting at idle and i Feel very little when the wheels lock and even when i test the motor while in the car i Feel little to nothing. the throttle works Fine in game and tests in game ok but the brake does not work, as soon as i leave the car it willl test ok again,any idea whats going on?
Go into iRacing settings turn off the haptic pedals in the misc setting
@@TerriblyRacing found that out in their discord but thanks for the reply, like the channel!👍🏾
thank god this dropped lmao
Thanks dude, let me know how you get on!
oh I should ask if anyone knows, in iRacing do you turn off the “vibrate wheel and pedals” option since it’s going through simhub instead?
@strasner_ yes I turn off the option in iRacing, it’s just unnecessary noise to me
@@TerriblyRacing thank you so much!! I was a little concerned about leaving the gain levels in simhub at 100% but the way you setup the gradual increase is amazing in f4! only been on iracing for like a month and done like 7 fixed f4’s but just got my first podium with these settings!
@@strasner_ that’s mint, glad you’re enjoying them as much as me
Do you also have settings for the Clio cup?
Really sorry I don’t, I’ve never raced it
are they worth getting for the throttle pedal?
I bought one for the brake waited a month and then got the throttle. The throttle is 100% worth it!
Are this very loud ?
They can be turned down but yes can be quite load detecting in the frequency
Ehhh my wife always complain when I am even shifting gears - and often I am racing during the night in American League - I bought them - let see
@@lukuxider2000 😂😂 that’s the spirit, just turn them down from 100% to 50 you’ll still feel it just quieter
Great. I set up these shakers on my fanatec pedals, and now I can't get my wheel and pedals to connect to the simulator.
I've disconnected the shakers, and now my sim is unusable.
I have no idea what to do.
🤬
@@leeg8461 playing on pc? What simulator? How are they connected to the pc?
@TerriblyRacing I'm on a cyberpower pc. I'm on iracing, and the shakers are connected to my pc through the simagic control module.
I got it all set up, and it worked for about a lap, and then I lost all connection from my fanatec dd1 wheel and pedals.
I couldn't even exit the sim, had to shut down the pc to get out.
I don't know if it's something in the simhub software, or some other tech issue. I've checked the connections several times.
Any suggestions?
@@leeg8461 if you unplug everything then restart the pc then plug in your fanatic stuff does it come back to life
Don't know. I'll try that.
That didn't work, but thanks for your time.
Be careful with simagic products.
The shakers destroyed the connection from my fanatec wheelbase to my iracing simulator.
@@leeg8461 sounds like be careful of fanatec products…
Any else found that since changes to porsche cup car this week, the haptic doesnt kick in as quickly when locking brakes? Do i need to adjust settings from the profile detailed here?
Yeah please feel free to adapt the profiles to all the other cars or updates. Sounds like you might want to reduce the threshold but have a play and see what suits you 👍🏽
@@TerriblyRacing hey, thanks for the response. Threshold is already at 0. Do you know if there is anything i can do?
@@patsollomlooking into this, this morning, will get back when I have results
@@patsollom so I’ve looked at settings there’s nothing you can change to make them kick in sooner, since things to check.
Under motors output is your wheels lock setting and brake setting both at 100%,
Also within effects profile, you can increase the input gain, maybe to 700, and also increase minimum force to .65.
These should help a little, if you can get the full licence for SimHub that would also help 👍🏽
@@TerriblyRacing thanks so much for taking a look. I think it feels good now in the dry. In the wet, not so much.