Thank you for this video. My hubby has just changed the pump on our machine seems to be fine 🤞🏻. Without this video it probably would of cost us a small fortune. Thank you again and please keep doing these videos.
Thanks for the detailed video. We had a problem with a Cylinda FT 352, a machine with a bottom that looks nearly exact like the one on the video. It did not drain after a failed wash of a carpet rug that turned into pieces in the machine. Water stayed in the drum even if the filter was removed. After blowing and sucking with a water-vacuum cleaner we decided to follow the video, with success. It turned out the blockade was in top of the big black hose that goes from the drum down to the drain pump - a big fluff of carpet rug. In the top of this hose there is a round ball that acts as some kind of pre-filter, and the hair from the rug was stuck there. There is no way to reach this filtering unless you loosen the hose from the drum. No need to remove it from the pump as most of the crap that you get after the ball seems to logically wash down to the normal filter. Also worth mentioning is that if you want to remove the bottom front plate like in the video but on a machine like ours, then there are brackets on the outer right and the left that you reach from inside that need to be pushed inwards. These are not shown in the video, I guess the construction is a tiny bit different because the movement there is just to remove the screw and push right, which you cannot do because the brackets.
Watched this 3 times, now ready to buy parts and confident of success. BTW this video is excellently made and not a single point that is difficult to follow. Really brilliant. Well done. I'll come back after the job and let you know how I did. Also must say the pumps on your eBay shop site are very competitively priced. Thank you.
Thank you I a look into where the pump rotor is after noise and water in the bottom of drum. I found a hairclip removed it and now all is well. Your so kind.
The Sat before, the eve of Christmas eve. No chance of getting someone out to do a repair. Followed the video and managed to fix the problem, but may need a new pump in early 2024! Many thanks!
Thnx. Love this Beko WMD261W machine. It stands out in reliability, simple and efficient desisgn. And it can withstand an unbelievable ammount of abuse. I fill it up maximum for over 3 years now, it never let's me down. (just don't put a pillow inside......) But, it works again after seperating and cleaning the pump as you told to do. Thanks!
My pump was vibrating, was working only after a small nudge, there is no ball bearing in mine but I have no idea how a big clog was inside the rotor, basically making it be stuck, cleaned everything up and now is working with no problems, thanks for the video helped me a lot
I was just gonna throw my machine out as it is stopping mid wash full of water, I did try an empty the water from the pump at the bottom but, there was to much water, it soaked my whole kitchen floor, but I will give it shot after watching your video, thank you!
Excellent video. Saved me a few quid to do this myself. (Of course, I forgot to put the filter cover on before testing the machine, but I can't really blame you for that.) There's a pint on it's way to you.
Thanks very much for this! Hopefully added a few more years onto the life of our Beko, now it has a new pump... everything was as described. Once I found pliers with enough grip for the big hose clamp it was a 10 minute job.
So glad it helped you Howard. If you find you have the time, Could you do us a favour and please share this video on your timeline Facebook twitter etc? This will help other people who can’t get engineers out to help them during the global coronavirus pandemic ruclips.net/video/rFyGAHVFUW8/видео.html&t facebook.com/how.to.repair.appliances/ thank you for your time, and please stay safe :)
Thanks. This is the noise mine is making at only 2 years old. Its a prosmart invertor motor 10kg black WY104764MB. Its snapped 2 belts already and door seal is starting to leak and now the pump lol. My old beko was great. I gave it to my mam and its now over 7 years old and still going. If this breaks i will be getting the old model back.
Hi found your video good details. now im partially shgited and cannot belive just before xmas is here my beko wme 72475wont drain. it spins now the waste was unblocked. but now i need to know how do i try and get into the waste pipe from machine to sink ppe. im so desperate to get this fixd as i dont have the money for them to come out. thanking you
Can you do us a favour and please share this video on your timeline. This will help other people who can’t get engineers out to help them. ruclips.net/video/rFyGAHVFUW8/видео.html&t Stay safe
i have tried to remove the filter but i have accidentally snapped the handle which you use to twist the filter. I did turn anti clockwise but it seems very hard to turn i have managed to get it open from when the water drains but i cannot seem to pull out the filter.
Iam Glad we could help you Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
He's a God sent but my case is a hit and miss. All but 1 program is working on my Beko which is 3yrs old and under use. One of the programs isn't rinsing, or draining, and gets over heated. Yet on all other programs it draining and spinning perfectly fine. The pump is clear, no code have been displayed to address any issues with the washer but I did notice that the 1 program, I can hear grinding noise. Any self help advice please?
My beko has a leak that is come from that area. A day ago was overfilled with clothes and I finded water coming from that area. Is more likely one hose around the pump lose ? Water is leaking when the filling cycle just starts (after 2 min when I plug it) .Please one opinion !
My new pump had the connection for the little black hose used to drain out water blocked off so it's not usable, is this supposed to be drilled through as and when it's needed?
I have Arcelik 8127 washing machine. It has been working well until last week when it broke down. The problem is as follows: When starting any program, the machine starts intaking water for five seconds and stops and keeps so on up to fifteen times and then discharges water while displaying "SAFETY" message; and finally switches off automatically. When starting spin program, the drain pump keeps discharging water and finally after 1 minute it displays "SAFETY" message; and finally switches off automatically.
Mine is the same model. It will only spin once I drain the bottom of it where filter is. There is no blockage in the filter. Whst do you think the problem could be? Could the pump be blocked at all? Cheers.
mthomas73 I am glad I could help you with this problem. if we helped you can allways buy us a beer how-2-repair.com/buy-paul-a-beer/ Please remember to mark us to your favorites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/pages/How-to-Video-Tutorials-on-Domestic-Appliances/129280853751256 Google plus. plus.google.com/+How-2-repair/posts
Hi. Thanks for your video. It helped me find out the problem. Can you tell me does it matter which plug goes back on? It was difficult getting the pump out and the plugs came off without me noting them. Any help appreciated.
Jump over to our facebook page and book a one to one with one of our engineers using facetime on facebook, i'm sure we could help in some way facebook.com/how.to.repair.appliances/
Hi there. I've got a beko wm7120w and sometime it dont drain properly and I'm having to put it I again on a drain cycle to remove more water. Sometimes this works sone times this don't. Would you say this is the pump problem like shown in video.
The basics of the machine have not changed for many years. The washer dryer still has the standard heating system on top with a condensing unit and an additional water valve. They're not difficult to maintain. Hope this helps you. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @druk49 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Hi can you help I have a Beko washing machine WMX 73120 B put it on a Daley quick wash it got down to 12 minutes and stopped I can not find anything trapped in it I have tried to reset but it’s still the same can you throw any light on this please from keith
Hi Paul I have a Beko WM5100w I replaced the bushes today as it kept tripping the RDC long story short I found how to run the diagnostics and it is trip when the motor try's to do a anti clockwise turn, Any help would be much appreciated. Thanks.
Can you do us a favour and please share this video on your timeline. This will help other people who can’t get engineers out to help them. ruclips.net/video/rFyGAHVFUW8/видео.html&t Stay safe
My pump did not work so i checked it and the wheel inside came off. So i have to take the pump off to see if it is fixable. If not i have to order a new one. Thanks for the video!!
Iam Glad we could help you. My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008 If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
Hi there, have the BEKO WM85135LW Washing Machine and it has been great up to now, but intermittently it will start the cycle to fill, and then just before it would normally start rotating, it then drains most of the water out of the machine. I then have to cancel the programme by holding the start button for 3 seconds, then it finishes draining and the cycle. I then start all over again from the beginning. Any ideas please? Great informative videos thank you, but nothing about my specific problem. Regards David
I would see this video on self diagnostic mode and also see the video on how to replace the carbon brushes in the motor both can be found at the website ruclips.net/video/RFDur_lIzfg/видео.html www.how-to-repair.com/help/how-to-replace-beko-washing-machine-motor-carbon-brushes/ Iam Glad we could help you Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
yes you need new one Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
hi, its Kevin here from Australia. i have a Beko BFL103ADW front load washing machine, I cant get it to start and everytime I press it on and start "E12" appears. I am just wondering how can I fix it. any suggestion will be appreciated. thank you.
i may just be able to help you there, Error Code E12 Definition: Washing machine has detected overfill. This error code can be caused by oversudsing from overloading or by adding too much detergent. The pressure sensor will read that there is too much water in the washer. you could try flushing it on a rinse cycle first to see if this clears the error whilst the machine is empty, or the easiest way of rectifying this fault is to drain all the water out of the machine, find the pressure switch on the machine remove the pipe and blow through it make sure you have the machine disconnected from the electricity Supply, you also may have to remove the sump hose to get at the pressure Bowl to clean this out as well. please feel free to contact me on our facebook for a free one to one chat facebook.com/how.to.repair.appliances
I installed the replacement pump, first it looked good but then the screen started blinking before the end of the cycle. The water almost all emptied but there was still some left in the filter/pump. The next time I tried it, the spin and temperature were grayed out on the screen and the cycle was stuck on a loop and none of the water emptied. Have I installed it wrong?
hi it sounds like there are coins or something jammed in the pump please remove it and clean it out. I am glad I could help you with this problem. Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
Hi, we just had someone replace the black funnel attached to the pump in our machine, but now it's stuck on a cycle and won't stop. Have they put it in wrong? didn't have this problem before they replaced it. Thank you
You are a repairer and make your money from replacing parts. This is a common problem with many pumps and can be TOTALLY SOLVED by simply cleaning the inside of the pump as you partially have. You don't always have to replace it with a new pump which can cost 150 quid.
f the water is not emptied on the machine then the machine will not spin please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Thank you for this video. My hubby has just changed the pump on our machine seems to be fine 🤞🏻. Without this video it probably would of cost us a small fortune. Thank you again and please keep doing these videos.
Thanks for the detailed video.
We had a problem with a Cylinda FT 352, a machine with a bottom that looks nearly exact like the one on the video. It did not drain after a failed wash of a carpet rug that turned into pieces in the machine. Water stayed in the drum even if the filter was removed.
After blowing and sucking with a water-vacuum cleaner we decided to follow the video, with success.
It turned out the blockade was in top of the big black hose that goes from the drum down to the drain pump - a big fluff of carpet rug. In the top of this hose there is a round ball that acts as some kind of pre-filter, and the hair from the rug was stuck there. There is no way to reach this filtering unless you loosen the hose from the drum. No need to remove it from the pump as most of the crap that you get after the ball seems to logically wash down to the normal filter.
Also worth mentioning is that if you want to remove the bottom front plate like in the video but on a machine like ours, then there are brackets on the outer right and the left that you reach from inside that need to be pushed inwards. These are not shown in the video, I guess the construction is a tiny bit different because the movement there is just to remove the screw and push right, which you cannot do because the brackets.
Watched this 3 times, now ready to buy parts and confident of success. BTW this video is excellently made and not a single point that is difficult to follow. Really brilliant. Well done.
I'll come back after the job and let you know how I did. Also must say the pumps on your eBay shop site are very competitively priced. Thank you.
Brilliant video, my pump had exactly the same noise, thanks to this video I was able to change the pump and get my machine working again! Thank you 🙂
Thank you I a look into where the pump rotor is after noise and water in the bottom of drum. I found a hairclip removed it and now all is well. Your so kind.
The Sat before, the eve of Christmas eve. No chance of getting someone out to do a repair. Followed the video and managed to fix the problem, but may need a new pump in early 2024! Many thanks!
Absolutely brilliant easy to fit great value parts saved me £400 thanks so much brilliant 👍
Thnx. Love this Beko WMD261W machine. It stands out in reliability, simple and efficient desisgn. And it can withstand an unbelievable ammount of abuse. I fill it up maximum for over 3 years now, it never let's me down. (just don't put a pillow inside......) But, it works again after seperating and cleaning the pump as you told to do. Thanks!
Awesome video thank you. Just took out the pump and cleaned it (much worse than the one you took out), now working perfectly 👍😁
My pump was vibrating, was working only after a small nudge, there is no ball bearing in mine but I have no idea how a big clog was inside the rotor, basically making it be stuck, cleaned everything up and now is working with no problems, thanks for the video helped me a lot
Part ordered and arriving tomorrow so fingers crossed it'll all go well 🤞🏼
Thanks for the video, it helped me a lot. A hair band stuck inside the pump.
I was just gonna throw my machine out as it is stopping mid wash full of water, I did try an empty the water from the pump at the bottom but, there was to much water, it soaked my whole kitchen floor, but I will give it shot after watching your video, thank you!
Excellent video. Saved me a few quid to do this myself. (Of course, I forgot to put the filter cover on before testing the machine, but I can't really blame you for that.)
There's a pint on it's way to you.
Thanks for this video. Very helpful 👍 shame they don’t include Jubilee clips with the pump, the large sump hose clip was a real struggle!
Very useful thank you, I just fitted a new pump to my 10 year old Beko 👍🏻👍🏻👍🏻👍🏻❤️🤗🤗
Glad it helped @stephenmeek520 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Thanks! Another great video! Helped me à LOT!
Thanks very much for this! Hopefully added a few more years onto the life of our Beko, now it has a new pump... everything was as described. Once I found pliers with enough grip for the big hose clamp it was a 10 minute job.
So glad it helped you Howard.
If you find you have the time, Could you do us a favour and please share this video on your timeline Facebook twitter etc?
This will help other people who can’t get engineers out to help them during the global coronavirus pandemic
ruclips.net/video/rFyGAHVFUW8/видео.html&t
facebook.com/how.to.repair.appliances/
thank you for your time, and please stay safe :)
Thanks. This is the noise mine is making at only 2 years old. Its a prosmart invertor motor 10kg black WY104764MB. Its snapped 2 belts already and door seal is starting to leak and now the pump lol. My old beko was great. I gave it to my mam and its now over 7 years old and still going. If this breaks i will be getting the old model back.
Found this video as a hail Mary before hiring an engineer, just saved me about $150 in parts and labor
How do you get the pump to test only?
Hi found your video good details. now im partially shgited and cannot belive just before xmas is here my beko wme 72475wont drain. it spins now the waste was unblocked. but now i need to know how do i try and get into the waste pipe from machine to sink ppe. im so desperate to get this fixd as i dont have the money for them to come out.
thanking you
Nicely shown,still useful; i'm gonna fix mine now; THANKS.
Can you do us a favour and please share this video on your timeline.
This will help other people who can’t get engineers out to help them.
ruclips.net/video/rFyGAHVFUW8/видео.html&t
Stay safe
I don't know about a 10 minute job but thanks very much. I got the job done in about and hour including checking time
Thanks Tim just what I was looking for
Top advice and easy enough to understand - job done.
i have tried to remove the filter but i have accidentally snapped the handle which you use to twist the filter. I did turn anti clockwise but it seems very hard to turn i have managed to get it open from when the water drains but i cannot seem to pull out the filter.
Thanks, this video was really helpful. Machine fixed.
thank you soooooo much .... i just fixed mine 🖒
Iam Glad we could help you
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Was it easy
Thank you all!!!Very good and useful video!!!!!!
Great ,clear video ...Many thanks
He's a God sent but my case is a hit and miss. All but 1 program is working on my Beko which is 3yrs old and under use. One of the programs isn't rinsing, or draining, and gets over heated. Yet on all other programs it draining and spinning perfectly fine. The pump is clear, no code have been displayed to address any issues with the washer but I did notice that the 1 program, I can hear grinding noise. Any self help advice please?
Great Video’s ⭐️⭐️⭐️⭐️⭐️
My beko has a leak that is come from that area. A day ago was overfilled with clothes and I finded water coming from that area. Is more likely one hose around the pump lose ? Water is leaking when the filling cycle just starts (after 2 min when I plug it) .Please one opinion !
My new pump had the connection for the little black hose used to drain out water blocked off so it's not usable, is this supposed to be drilled through as and when it's needed?
Hi the small drain pipe , would that leak on a wash cycle, mine has a crack in it and I have water coming from that side underneath
respect for this brilliant video ;)
I have Arcelik 8127 washing machine. It has been working well until last week when it broke down.
The problem is as follows:
When starting any program, the machine starts intaking water for five seconds and stops and keeps so on up to fifteen times and then discharges water while displaying "SAFETY" message; and finally switches off automatically.
When starting spin program, the drain pump keeps discharging water and finally after 1 minute it displays "SAFETY" message; and finally switches off automatically.
Mine is the same model. It will only spin once I drain the bottom of it where filter is. There is no blockage in the filter. Whst do you think the problem could be? Could the pump be blocked at all? Cheers.
Thanks for the very useful information, helped a lot
mthomas73 I am glad I could help you with this problem. if we helped you can allways buy us a beer how-2-repair.com/buy-paul-a-beer/
Please remember to mark us to your favorites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/pages/How-to-Video-Tutorials-on-Domestic-Appliances/129280853751256
Google plus.
plus.google.com/+How-2-repair/posts
Hi. Thanks for your video. It helped me find out the problem. Can you tell me does it matter which plug goes back on? It was difficult getting the pump out and the plugs came off without me noting them. Any help appreciated.
Jump over to our facebook page and book a one to one with one of our engineers using facetime on facebook, i'm sure we could help in some way
facebook.com/how.to.repair.appliances/
Hi there. I've got a beko wm7120w and sometime it dont drain properly and I'm having to put it I again on a drain cycle to remove more water. Sometimes this works sone times this don't. Would you say this is the pump problem like shown in video.
Does it matter which of the plugs goes into which side of the pump socket?
Any idea how I can pull the hose out? It’s gone right inside
Thanks . Are new model Beko washer and dryers easy to maintain and repair ?
The basics of the machine have not changed for many years. The washer dryer still has the standard heating system on top with a condensing unit and an additional water valve. They're not difficult to maintain. Hope this helps you. What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be RUclips superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @druk49 please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Hey dudes guess what, I just fixed my washing machine \o/ thank you ♥.
Hi can you help I have a Beko washing machine WMX 73120 B put it on a Daley quick wash it got down to 12 minutes and stopped I can not find anything trapped in it I have tried to reset but it’s still the same can you throw any light on this please from keith
Hi Paul I have a Beko WM5100w I replaced the bushes today as it kept tripping the RDC long story short I found how to run the diagnostics and it is trip when the motor try's to do a anti clockwise turn, Any help would be much appreciated. Thanks.
Thank you, this was helpful
Great help.
Can you do us a favour and please share this video on your timeline.
This will help other people who can’t get engineers out to help them.
ruclips.net/video/rFyGAHVFUW8/видео.html&t
Stay safe
thanks for sharing it 🙏🙏
Because I bought beko Im becoming bekos finest engineer :-()))))))
Thank you!
My pump did not work so i checked it and the wheel inside came off. So i have to take the pump off to see if it is fixable. If not i have to order a new one. Thanks for the video!!
Iam Glad we could help you.
My Ebay Shop rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fstr%2Fhowtorepair&campid=5338676951&toolid=20008
If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Hi my impellor blades have seperated from the pump, can these be re-attached?
92,000 views, if only every one of those bought you a "beer"
what abou if the machine isnt filling and will cut out on washing with a washing light
Good morning Sir , I have WDJ7523023W
Beko how much is the bomb please let me know thanks
Hi there, have the BEKO WM85135LW Washing Machine and it has been great up to now, but intermittently it will start the cycle to fill, and then just before it would normally start rotating, it then drains most of the water out of the machine. I then have to cancel the programme by holding the start button for 3 seconds, then it finishes draining and the cycle.
I then start all over again from the beginning.
Any ideas please?
Great informative videos thank you, but nothing about my specific problem.
Regards
David
I would see this video on self diagnostic mode and also see the video on how to replace the carbon brushes in the motor both can be found at the website
ruclips.net/video/RFDur_lIzfg/видео.html
www.how-to-repair.com/help/how-to-replace-beko-washing-machine-motor-carbon-brushes/
Iam Glad we could help you
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Need help, the pump is working but the plastic fan always falls off the rod. Is that why the machine wont drain water out?
yes you need new one Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
excellent thanks!
hi any ideas how to fix my machine,it will spin but it won't empty😨
hi, its Kevin here from Australia. i have a Beko BFL103ADW front load washing machine, I cant get it to start and everytime I press it on and start "E12" appears. I am just wondering how can I fix it. any suggestion will be appreciated. thank you.
i may just be able to help you there,
Error Code E12 Definition: Washing machine has detected overfill.
This error code can be caused by oversudsing from overloading or by adding too much detergent.
The pressure sensor will read that there is too much water in the washer.
you could try flushing it on a rinse cycle first to see if this clears the error
whilst the machine is empty,
or the easiest way of rectifying this fault is to drain all the water out of the machine, find the pressure switch on the machine remove the pipe and blow through it make sure you have the machine disconnected from the electricity Supply,
you also may have to remove the sump hose to get at the pressure Bowl to clean this out as well.
please feel free to contact me on our facebook for a free one to one chat
facebook.com/how.to.repair.appliances
what is the tool called that is used to remove clamp. store for purchase
I installed the replacement pump, first it looked good but then the screen started blinking before the end of the cycle. The water almost all emptied but there was still some left in the filter/pump. The next time I tried it, the spin and temperature were grayed out on the screen and the cycle was stuck on a loop and none of the water emptied. Have I installed it wrong?
hi it sounds like there are coins or something jammed in the pump please remove it and clean it out. I am glad I could help you with this problem.
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Hi, we just had someone replace the black funnel attached to the pump in our machine, but now it's stuck on a cycle and won't stop. Have they put it in wrong? didn't have this problem before they replaced it. Thank you
is the machine emptying as only a blockage might cause this problem
how-2-repair.com no, it's not emptying just washing continuously
therefore you have a blockage in hose or something in the pump
You are a repairer and make your money from replacing parts. This is a common problem with many pumps and can be TOTALLY SOLVED by simply cleaning the inside of the pump as you partially have. You don't always have to replace it with a new pump which can cost 150 quid.
I just replaced the pump on my Beko and it cost me £29.95
Thanks just fixed the washing machine for the price of a new pair of pliers
Can this cause the washing machine not to spin
f the water is not emptied on the machine then the machine will not spin please remember to subscribe as that's is was keeps this channel going. Thanks 👍
how do you remove the wire connection
No option to remove the front panel on my machine :-(
Pity the wiring is so short the rest wee buns
You forgot to put the electrics shield back on
Wish me luck!
Update: found a blob of baby socks in the black hose!
k cm
This is bullshit. In my case it is not possible to unscrew filter. What to do?