Mended our 8 year old Beko washing machine thanks to your very clear video and a £12.90 new door seal off Ebay. So chuffed. Just paid for a pint for you.... we should all show our appreciation like that to fund you. I don't usually think to tbh. Thanks again xx
What a Great video. I did this all by myself as Hubby away at the time. I kept pausing the video and carried out the task, step by step. Thank you so much. Saved me a fortune.
BIG thank you. This is one of the most comprehensive and clear guides I've ever used. Extremely helpful! The springs were a nightmare to get back on, luckily a friend showed up at exactly the right time to help me get them on.
+Feyd01 I am glad I could help you with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your social media timeline & remember to mark us to your favourites. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/RUclips. ruclips.net/user/Apart4uFacebook. facebook.com/how.to.repair.appliances
Thanks for this ! Saved me a bunch of money as I was able to replace the gasket myself. Bought you a beer as a thank you. Only comment is that i cracked up when you said get your wife to help you with an extra set of hands. It isn't only guys watching these videos :)
Just replaced mine with the help of this video - thanks allot! Protip: if you don't have a plastic clamp or someone to help you, just use your foot. Worked for me :P
just fitted a door seal today 10th october a couple extra screws in my model wm15102w but with the help from my wife putting on seal springs it was all done within 1 hour . excellent lnfo video thankyou
Thank you for this video. We have this washing machine and used your video as a step by step tutorial and successfully changed the door seal. Brilliant hits and tips. Thanks again. We couldn’t have done it without this video.
Hi thank you so much for this video. We have a Beko integrated washing machine but the steps where almost the same just a few extra screws in places. I followed it step by step and it works perfectly. The hardest part was getting the retaining springs back on, I ended up carefully using 2 screwdriver. Thanks again
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Excellent thank you. I was very close to buying a new washing machine because it was leaking from underneath until I realised a little slit in the door seal. And after watching this video, now I know how to put on the new door seal.
Great video! I came to this video after pricing up a seal from your eBay page. Needles to say, I'm going back there now to make my purchase. Many Thanks!
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍
Thanks for the video, replaced my door seal in 15 minutes, only difference was my machine had two screws holding the control panel as well as the three clips. I also used a clamp as a third hand, brilliant idea. Beer on the way...
Very helpful... if your on your own when fitting I used my knee to help keep the seal in place plus I also used a bicycle Tyre leaver to help get the ring back on... hope this helps those who dont have a clamp...
Couldn’t have done this without your video. Even though our model came apart slightly differently, all the trickier bits were perfectly explained here. Thanks a ton!
Glad it helped Thank you for leaving a comment this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
anthony baulk yeah to true I got my 6 year old daughter to use a screwdriver to leverage it in whist I nearly broke my finger pulling the spring over the lip 😂
Hi, thanks a lot for your comment. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Could you please also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Thanks, Paul 👍
Thank you! This was a massive help,slight problem my washer now doesn’t work. Everything seems to be lit up end working but when I press start nothings happening. Wondering if I’ve knocked a cable out of place or something?
"Getting this retaining spring on is not as easy as I make it look." Never a truer word said. What a complete mission. Had to give up in the end and call a repair man out. £50 labour (bought the rubber seal on Amazon for £13). Wish I'd done that straight away though instead of spending hours trying to follow this video. Even with someone helping me, that retaining spring was way too difficult. P.s. First thing repair man said was, "Why did you take the front off the machine?" FFS.
Cheers mate! My model had everything just ever so slightly different, but the overall process was obviously the same. Thanks so much for making this video - enjoy a tasty beer from me!
This was a swine to do but very greatful for the video! When it comes to the springs - especially the front spring - clamps and bicycle tyre levers are your friend.
thanks. that helped ever so much. Accidentally discovered something that might help other people btw: getting the tension springs back on - used 2 x plastic curtain rail hooks instead of the ends of my fingers - really makes that part of it extra easy - like they were made for the job.
Thanks for this great video. I'm wondering if this method applies to the Beko WA-1050 Type 6150CT? Would love to replace the seal as it is damaged after over 20 years of use.
I just opened door ripped old seal out , tryed to fit new one lol...wouldn't happen...found this on utube , then done it the right way of thanks for video it really helped me out from calling someone out 🖒🖒
Great video, many thanks. Job done! That inner seal ring though!! 😬. I’m going to need a beer or 5 to get over the trauma of fitting that inner seal ring thingy.
The seal on our beko really smells bad. And there is significant buildup of mould when you look under the surface. Its beyond cleaning. Is there a certain type of detergent that would prevent this happening as much with the new seal? Im actually looking forward to doing it now, ive got the seal on order. Ive done the heater before. Come to think of it, i wonder if the lack of heat contributed to the mould build up? That was a few years ago, but it was without heat for quite a while, and once the mould has started i guess its hard to stop!
Iam Glad we could help you.if you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
This video was so useful - thank you! I’m having trouble putting back the front ring around the seal, even with the help of another person. Where can I get the little clamps from? Thanks!
Can you do us a favour and please share this video on your timeline. This will help other people who can’t get engineers out to help them. ruclips.net/video/rFyGAHVFUW8/видео.html&t Stay safe
Hi! Can you advise how you did it?... the presenter obscures with his hand how to start the reattached seal?...I've watched tons of videos and they all obscure how to/ where to start. They all seen sit the seal in seconds...how???
Glad it was helpful! @user-ro3kv5on5n please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Thanks for this, very useful. Getting the springs on is a challenge, particularly the outer one. Couldn't have done them without clamps - I used large ones from Wickes.
Thank you for yet another brilliant video! Always a daunting task seeing how much you have to strip down (and remember what goes where, and in what order during putting back together!) but your videos make it easy to fix things yourself. Many thanks and keep up the good work! (PS: you're right about those retaining rings..........looks easy to refit but an absolute nightmare! Fingers now officially worn down to wee stumps! Got their in the end though! :-) )
Thank you! Took my other half a good hour but far cheaper than paying someone else to do it! Hardest part were those springs! Beer is coming your way...
+Jo White Please remember to help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u
Thanks for the video, it's so well explained that even me, woman could do :-) my model is WMB 71432 B. Getting a front panel is however a bit different, there is two orange, plastic pins at the lower part of the front panel (with doors). These have to be first pulled out to outside (yourside) and then slightly sliding down the upper part. Not a whole panel down as on video, because then you will break them and to one of the orange pin is cable attached. Inspect with light before you'll do it. The rest is however similar as in this video, panel with electric part, has also some clicks at the lower part too, gently pull it out after detaching upper three clics. Good luck!
What a fantastic video. Really clear instructions, clear simple language. Was able to successfully replace my door seal for a WMB81241LB... fair play for posting it. Sincere thanks. How do we buy you a beer?? Dara
Can you tell me how to remove the front cover on a BEKO WMI 71641 integrated model so I can replace the door seal. The bottom would pull out but not the top. Thanks
Really glad I could help you and that if you ever need for the assistance we want to show a few times a month which you are able to participate in to get any questions answered
Andy Cross I am glad I could help you with this problem. Please remember to help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or Website onyour timeline. This helps us a lot and if we really helped you can Always buy us a beer how-to-repair.com/help/buy-paul-a-beer/Please remember to mark us to your favourites also I would be grateful if you would Subscribe to our channels social media as this really helps my site and keeps us going.RUclips. ruclips.net/user/Apart4uFacebook. facebook.com/how.to.repair.appliances
Greetings from USA! Love your videos, thanks for sharing these with us. We have a mold/smelly machine, I was going to replace the seal but I don't think I can get the retaining clip on mine since it seems to be a totally different style like a solid metal kind of seal. What do you recommend to get rid of the mold smell that sometimes even rubs on clothing.
The Retaining spring came off mine and i could not find where it went or what it was i spent alot of time looking at Beko parts and and google images thinks its a necklace i been at it for about an hour looking. I was looking that this video would give me some idea of what it was . Thank you so much
Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. ruclips.net/video/rFyGAHVFUW8/видео.html&t facebook.com/how.to.repair.appliances/ Stay safe
Just done ours with the help of this video,thank you so much for your help!!! Outside spring is so tricky.....especially when the mrs has fake nails on!!😂
Hello, I wonder if can help me .I have a Beko WMC61S .As you said that these machines have no way to change there bearings . With that said I managed to grind the front of the tub off .To my surprise I found the bearing were good . Further investigation I found that the shaft from the drums wasn't true I heated it and managed to get it straitened. I replaced the same bearing as there was nothing wrong with .I did we pack them with grease . Every thing so far good checked the brushes on the motor all ok.The drum run good a little bit of balance but ok .Stuck the two pieces together water tight . Drum runs freely. Now with all that done . This is going to sound bit daft But. For the life of me I can't get the front seal on I have tried all ways .I am a engineer by trade and nothing beats me So if you could help I would appreciate it .Thanks'
Glad it was helpful! Thank you for leaving a comment this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
Beer is sent :) took a while as it was the first time I had done one, but knew I would get there eventually... Next up, my girlfriends noisy Hotpoint washing machine that we were going to dump, if I can repair that then you can expect a round or even a night out. It is very very noisy though, and has been for about a year... Do you think running it on bad bearing will have caused more problems?
Use a pair of scissors on that outer spring to stretch it turns a headache into 30 second job bit if fairy liquid round seal so spring moves round the seal rather than pulling the seal back off the door
I can’t see why you’d need to access the back and take the top cover off, or remove the control panel, when the screws for the front panel are at the bottom? If I’m right that would make the job a fair bit easier as no need to remove the machine from under the counter Thanks for the video!
Iam Glad we could help you Please remember to subscribe to our channel ruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
Why does the ring on my Beko WMD 261 W keeps coming off every few months ? could this be a manufacturing defect? Its now 4th time that the outer ring came off , it also caused clothes jamming the drum which stopped spinning and the motor kept going, the belt overheated due to slipping at the motor shaft and broke! It seems if this ring keeps coming off on a regular bases (4 times in 3 years) then it may be a manufacturing defect.
For all the idiots like me who unsuccessfully try to fit the inner seal using lots of strength - look exactly where this man applies the detergent - this part comes on top of the outer plastic sphere/chamber. The inner part of the rubber seal comes IN-BETWEEN the washing chamber and the surrounding plastic one. Then fitting the seal back is pretty easy.
Hello thanks for the video, I have got Beko D4 8101 E (8kg)washing machine , could you give me list of which machines door seals are compatible with my machine? because I don't know exact *----- (Arçelik, beko etc.) Thanks in advance Great work.
I thought I’d done it. I was so proud. The electric top had been hard to put back in place my model needed to clip around a tray invert. I’d also had a screw at the bottom of the machine corrode tight a friend removed it for me. I felt so hopeful. Then it started to leak part way into the first wash and now there is smoke coming out of the detergent tray. I turned it off straight away but what did I do wrong? I feel such an idiot.
just about to change the door seal on a Beko WMA 10 W. Great video, thanks. Just one thing, I can't for the life of me see why you removed the front control panel. As the door slides down and away, why does the upper CP need to be off?
I am glad I could help you with this problem.Please remember to subscribe to our channelruclips.net/user/Apart4u Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.RUclips. ruclips.net/user/Apart4u Facebook. facebook.com/how.to.repair.appliances
Glad you enjoyed it! if you need help ever contact us at website. We now have Live Q@A's weekly on our live show, see our home page ruclips.net/user/How-2-repair for the next date
Really glad it helped you fix your problem Thank you for leaving a comment this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I was really enjoying watching this video to help me repair my washing machine - until I got to the part where you mentioned getting ‘the wife’ to hold the metal spring in place. I am ‘the wife’ and was planning on fixing our washing machine myself. I will ask ‘my husband’ to hold the spring in place to help me. Thanks for the tip.
Thanks
Thank you very much for the donation and supporting the website. It is much appreciated and helps us keep the site going.
Mended our 8 year old Beko washing machine thanks to your very clear video and a £12.90 new door seal off Ebay. So chuffed. Just paid for a pint for you.... we should all show our appreciation like that to fund you. I don't usually think to tbh. Thanks again xx
Glad it helped and thanks for the beer
What a Great video. I did this all by myself as Hubby away at the time. I kept pausing the video and carried out the task, step by step. Thank you so much. Saved me a fortune.
BIG thank you. This is one of the most comprehensive and clear guides I've ever used. Extremely helpful! The springs were a nightmare to get back on, luckily a friend showed up at exactly the right time to help me get them on.
+Feyd01 I am glad I could help you with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the
video or website on your social media timeline & remember to mark us to
your favourites. This helps us a lot and if we really helped you can always buy
us a beer how-to-repair.com/help/buy-paul-a-beer/RUclips. ruclips.net/user/Apart4uFacebook.
facebook.com/how.to.repair.appliances
Thankyou for your video, turned a potentially long stressful and wasted sunday into a 30min job👍👍really appreciate your content.
Thanks for this ! Saved me a bunch of money as I was able to replace the gasket myself. Bought you a beer as a thank you. Only comment is that i cracked up when you said get your wife to help you with an extra set of hands. It isn't only guys watching these videos :)
Exactly I do all repairs myself in my flat 🙂
Yeah great comment!!! I’ve always done repairs/decorating/cooking/cleaning…….single mum and very independent 😂😂
Just replaced mine with the help of this video - thanks allot!
Protip: if you don't have a plastic clamp or someone to help you, just use your foot. Worked for me :P
just fitted a door seal today 10th october a couple extra screws in my model wm15102w but with the help from my wife putting on seal springs it was all done within 1 hour . excellent lnfo video thankyou
Thank you for this video. We have this washing machine and used your video as a step by step tutorial and successfully changed the door seal. Brilliant hits and tips. Thanks again. We couldn’t have done it without this video.
I thought my gasket was the wrong one but watching this and now my washingachine is fixed.
Thank you.
Hi thank you so much for this video. We have a Beko integrated washing machine but the steps where almost the same just a few extra screws in places.
I followed it step by step and it works perfectly. The hardest part was getting the retaining springs back on, I ended up carefully using 2 screwdriver. Thanks again
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. ruclips.net/user/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Excellent thank you. I was very close to buying a new washing machine because it was leaking from underneath until I realised a little slit in the door seal. And after watching this video, now I know how to put on the new door seal.
You are welcome!
Great video! I came to this video after pricing up a seal from your eBay page. Needles to say, I'm going back there now to make my purchase. Many Thanks!
Probably one of the best RUclips instruction videos.
Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Thanks, Paul 👍
Thanks for the video, replaced my door seal in 15 minutes, only difference was my machine had two screws holding the control panel as well as the three clips. I also used a clamp as a third hand, brilliant idea. Beer on the way...
Very helpful... if your on your own when fitting I used my knee to help keep the seal in place plus I also used a bicycle Tyre leaver to help get the ring back on... hope this helps those who dont have a clamp...
Top tip on using a bicycle tyre lever!
After 10 mins struggling with a clamp, tried the tyre lever and was done in less than a minute. Cheers!
Thanks! My Beko was a bit harder to get the front panel off but once I sorted that I managed the job well and the video was a superb guide.
Couldn’t have done this without your video. Even though our model came apart slightly differently, all the trickier bits were perfectly explained here. Thanks a ton!
Glad it helped Thank you for leaving a comment this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Just done mine with help from this vid , thank you very much !!!
Getting the outer Spring ring back on is the trickiest bit
Thanks again
anthony baulk yeah to true I got my 6 year old daughter to use a screwdriver to leverage it in whist I nearly broke my finger pulling the spring over the lip 😂
That was a great video, very good explaining. I literally replaced the seal in 30 minutes! Thank you very much for the video!
Hi, thanks a lot for your comment. Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/
Could you please also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇
Here's the poll question: www.youtube.com/@How-to-repair/community
Thanks, Paul 👍
Thank you! This was a massive help,slight problem my washer now doesn’t work. Everything seems to be lit up end working but when I press start nothings happening. Wondering if I’ve knocked a cable out of place or something?
"Getting this retaining spring on is not as easy as I make it look." Never a truer word said. What a complete mission. Had to give up in the end and call a repair man out. £50 labour (bought the rubber seal on Amazon for £13). Wish I'd done that straight away though instead of spending hours trying to follow this video. Even with someone helping me, that retaining spring was way too difficult. P.s. First thing repair man said was, "Why did you take the front off the machine?" FFS.
Cheers mate! My model had everything just ever so slightly different, but the overall process was obviously the same. Thanks so much for making this video - enjoy a tasty beer from me!
Just changed my daughter's washing machine door and seal, this video is excellent, enjoy your beer, thank you
This was a swine to do but very greatful for the video!
When it comes to the springs - especially the front spring - clamps and bicycle tyre levers are your friend.
Thanks for this, really helpful. I'm the wife and managed to do it with the help of my husband! 😉
Glad it helped! @user-qj6pj5hp9o please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Brilliant. Took me about an hour in all. The springs are the hardest bit and definitely need two people. Enjoy your beer! 🍻 Cheers
thanks for the beer much appreciated
amol Hassle
thanks. that helped ever so much. Accidentally discovered something that might help other people btw: getting the tension springs back on - used 2 x plastic curtain rail hooks instead of the ends of my fingers - really makes that part of it extra easy - like they were made for the job.
Thanks for this great video. I'm wondering if this method applies to the Beko WA-1050 Type 6150CT? Would love to replace the seal as it is damaged after over 20 years of use.
I just opened door ripped old seal out , tryed to fit new one lol...wouldn't happen...found this on utube , then done it the right way of thanks for video it really helped me out from calling someone out 🖒🖒
Thank you for this video, just saved me from throwing the whole thing out, repaired after watching this video within 5mins
You saved my life today. Thanks very much. My beko seal came away slightly and I had no idea where the front wire went! Brilliant !
This video was a great help. Thank you. I used two bicycle tyre levers to ease the second (outer) spring into place.
Great video, many thanks. Job done!
That inner seal ring though!! 😬. I’m going to need a beer or 5 to get over the trauma of fitting that inner seal ring thingy.
Sorry, but do I need a Torx screwdriver set for this? Not sure if you mentioned what tools you were using. Thanks.
Hi there, very helpful video but can you advise on where to obtain the plastic clamp you use to help hold new seal in place? Thanks
You need to use our website giving us the full model number of your machine and we will be happy to try and get the part for you
The seal on our beko really smells bad. And there is significant buildup of mould when you look under the surface. Its beyond cleaning. Is there a certain type of detergent that would prevent this happening as much with the new seal? Im actually looking forward to doing it now, ive got the seal on order. Ive done the heater before. Come to think of it, i wonder if the lack of heat contributed to the mould build up? That was a few years ago, but it was without heat for quite a while, and once the mould has started i guess its hard to stop!
The dishwashing liquid tip was a godsend thank you mate
Thank you for this very helpful guide. Successfully replaced the split door seal on our Beko!
Iam Glad we could help you.if you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Excellent thank you,I needed to remove the front counter weight on my Beko WM6152W in order to get the inner spring off and the new one one.
Excellent video cheers!! Managed to change the door seal with your help! Wouldn’t have had a chance otherwise
Great video :) In this video, is it possible to replace the seal without removing the top electronics panel?
This video was so useful - thank you! I’m having trouble putting back the front ring around the seal, even with the help of another person. Where can I get the little clamps from? Thanks!
Can you do us a favour and please share this video on your timeline.
This will help other people who can’t get engineers out to help them.
ruclips.net/video/rFyGAHVFUW8/видео.html&t
Stay safe
Thanks for the video. We struggled to find the exact way the seal needs to go in but managed it in the end .
Hi! Can you advise how you did it?... the presenter obscures with his hand how to start the reattached seal?...I've watched tons of videos and they all obscure how to/ where to start. They all seen sit the seal in seconds...how???
Thank you very much. In this content, you have provided us with useful information about installing waterproofing for the washing machine
Glad it was helpful! @user-ro3kv5on5n please remember to subscribe to our channel as that really helps us ruclips.net/user/shortse432SAb2g08 Thanks, Paul 👍
Great video “the wife” was watching rugby upstairs so his help with the springs and your video jobs a Goodun 🎉
Thanks for this, very useful. Getting the springs on is a challenge, particularly the outer one. Couldn't have done them without clamps - I used large ones from Wickes.
Glad it helped! thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you
Thank you for yet another brilliant video! Always a daunting task seeing how much you have to strip down (and remember what goes where, and in what order during putting back together!) but your videos make it easy to fix things yourself. Many thanks and keep up the good work! (PS: you're right about those retaining rings..........looks easy to refit but an absolute nightmare! Fingers now officially worn down to wee stumps! Got their in the end though! :-) )
You mean there
Thank you for the video. What its shown me is that its easy to order the part but think I'll let the shop repair it. quite a lot to do
As a 20 yo living alone I really appreciate the clear explanation. I fucking love u for saving me €100+
Glad it helped Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Thanks for the video. FYI at the end of the video, the word “Diagnose” is spelled incorrectly. Thanks again!
Thank you! Took my other half a good hour but far cheaper than paying someone else to do it! Hardest part were those springs! Beer is coming your way...
+Jo White Please remember to help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
RUclips. ruclips.net/user/Apart4u
Thanks for the video, it's so well explained that even me, woman could do :-) my model is WMB 71432 B. Getting a front panel is however a bit different, there is two orange, plastic pins at the lower part of the front panel (with doors). These have to be first pulled out to outside (yourside) and then slightly sliding down the upper part. Not a whole panel down as on video, because then you will break them and to one of the orange pin is cable attached. Inspect with light before you'll do it. The rest is however similar as in this video, panel with electric part, has also some clicks at the lower part too, gently pull it out after detaching upper three clics. Good luck!
mi ca yeh mines the same jus5 totally messed it up as assumed was the same
Thank you so much! You just made some people in Tel-Aviv very happy
What a fantastic video. Really clear instructions, clear simple language. Was able to successfully replace my door seal for a WMB81241LB... fair play for posting it. Sincere thanks. How do we buy you a beer?? Dara
Can you tell me how to remove the front cover on a BEKO WMI 71641 integrated model so I can replace the door seal. The bottom would pull out but not the top. Thanks
This saved me alot of frustration and time
Thanks you👍
Really glad I could help you and that if you ever need for the assistance we want to show a few times a month which you are able to participate in to get any questions answered
brilliant presentation and explanation
You beautiful man, the detergent tip made it so easy!
great instructional video, better than calling out a repair man!!
Andy Cross I am glad I could help you with this problem.
Please remember to help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Just done mine thanks for the video for help it’s great to have a step by step guide thank a lot
Thanks a lot for this vid , washing machine working brilliant again , no leaks , thanks
Please remember
to subscribe to our channel ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or Website onyour timeline. This helps us a lot and if we really helped you can Always buy us a beer how-to-repair.com/help/buy-paul-a-beer/Please remember to mark us to your favourites also I would be grateful if you would Subscribe to our channels social media as this really helps my site and keeps us going.RUclips.
ruclips.net/user/Apart4uFacebook.
facebook.com/how.to.repair.appliances
Greetings from USA! Love your videos, thanks for sharing these with us. We have a mold/smelly machine, I was going to replace the seal but I don't think I can get the retaining clip on mine since it seems to be a totally different style like a solid metal kind of seal. What do you recommend to get rid of the mold smell that sometimes even rubs on clothing.
The Retaining spring came off mine and i could not find where it went or what it was i spent alot of time looking at Beko parts and and google images thinks its a necklace i been at it for about an hour looking. I was looking that this video would give me some idea of what it was . Thank you so much
Can you do us a favour and please share this video on your timeline Facebook twitter etc .
This will help other people who can’t get engineers out to help them.
ruclips.net/video/rFyGAHVFUW8/видео.html&t
facebook.com/how.to.repair.appliances/
Stay safe
Just done ours with the help of this video,thank you so much for your help!!! Outside spring is so tricky.....especially when the mrs has fake nails on!!😂
Hello, I wonder if can help me .I have a Beko WMC61S .As you said that these machines have no way to change there bearings . With that said I managed to grind the front of the tub off .To my surprise
I found the bearing were good . Further investigation I found that the shaft from the drums wasn't true I heated it and managed to get it straitened. I replaced the same bearing as there was nothing wrong with .I did we pack them with grease . Every thing so far good checked the brushes on the motor all ok.The drum run good a little bit of balance but ok .Stuck the two pieces together water tight . Drum runs freely. Now with all that done . This is going to sound bit daft But. For the life of me I can't get the front seal on I have tried all ways .I am a engineer by trade and nothing beats me
So if you could help I would appreciate it .Thanks'
Brilliant video. So easy to follow and well presented.
Glad it was helpful! Thank you for leaving a comment this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Great video mate.... perfect step by step guide to follow. cheers for saving me loads of money
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Beer is sent :) took a while as it was the first time I had done one, but knew I would get there eventually... Next up, my girlfriends noisy Hotpoint washing machine that we were going to dump, if I can repair that then you can expect a round or even a night out. It is very very noisy though, and has been for about a year... Do you think running it on bad bearing will have caused more problems?
ive got water dripping down the concrete on the door side would you say the seals worn...
Hi Guys, is this for the model Beko wtg620m1w ? Cheers
Use a pair of scissors on that outer spring to stretch it turns a headache into 30 second job bit if fairy liquid round seal so spring moves round the seal rather than pulling the seal back off the door
Hi, I was replacing the door hinge and accidentally pushed the plate, that it attaches to, in. Whats the minimum disassembly to get to it? Thankyou
I can’t see why you’d need to access the back and take the top cover off, or remove the control panel, when the screws for the front panel are at the bottom?
If I’m right that would make the job a fair bit easier as no need to remove the machine from under the counter
Thanks for the video!
Good tutorial but could do with explaining how the seal goes on in a little more detail. Still managed to change it myself thanks to this. Cheers!
Iam Glad we could help you
Please remember to subscribe to our channel
ruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Why does the ring on my Beko WMD 261 W keeps coming off every few months ? could this be a manufacturing defect? Its now 4th time that the outer ring came off , it also caused clothes jamming the drum which stopped spinning and the motor kept going, the belt overheated due to slipping at the motor shaft and broke! It seems if this ring keeps coming off on a regular bases (4 times in 3 years) then it may be a manufacturing defect.
For all the idiots like me who unsuccessfully try to fit the inner seal using lots of strength - look exactly where this man applies the detergent - this part comes on top of the outer plastic sphere/chamber. The inner part of the rubber seal comes IN-BETWEEN the washing chamber and the surrounding plastic one. Then fitting the seal back is pretty easy.
The simple techniques always the best please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Really good and easy to follow video!
Hello thanks for the video, I have got Beko D4 8101 E (8kg)washing machine , could you give me list of which machines door seals are compatible with my machine? because I don't know exact *----- (Arçelik, beko etc.) Thanks in advance
Great work.
Thanks a lot for this detailed explanation!!!
excellent vid no fear in attacking this job thanks
Thank you for this great instruction video which sorted my problem!
I thought I’d done it. I was so proud. The electric top had been hard to put back in place my model needed to clip around a tray invert. I’d also had a screw at the bottom of the machine corrode tight a friend removed it for me. I felt so hopeful. Then it started to leak part way into the first wash and now there is smoke coming out of the detergent tray. I turned it off straight away but what did I do wrong? I feel such an idiot.
Only one spring on the outside none on the inside when i took out the rubber seal is this normal doesn't make sense model no WM7120W can u help
Thanks for the video advise. You did make it look easy but I eventually managed to get it on.
I would never have done this without your help. Thank you kind sir. I'm subscribed!!
Brilliant demo vid. Thank you very much.
Thank you sir.
Thank you for this video. Managed to fix my girlfriend's washing machine without swearing or using a hammer.
The outer spring had me in tears.. But all fixed now.. 😁😁😁
Great my seal has just got cought up with a pair of tights some how and removed itself from the machine so will be giving this a go shortly
just about to change the door seal on a Beko WMA 10 W. Great video, thanks. Just one thing, I can't for the life of me see why you removed the front control panel. As the door slides down and away, why does the upper CP need to be off?
to get to the 2 top screws that secure it in place
great video thanks! you really do make those springs look easy!
I am glad I could help you with this problem.Please remember to subscribe to our channelruclips.net/user/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.RUclips. ruclips.net/user/Apart4u
Facebook. facebook.com/how.to.repair.appliances
thank you very useful bought another one on your ebay shop thanks for the link and video
Glad you enjoyed it! if you need help ever contact us at website. We now have Live Q@A's weekly on our live show, see our home page ruclips.net/user/How-2-repair for the next date
Excellent stuff, will be attempting this in the next week or so on my Beko.
Where would I buy one of those plastic clamps? Thanks
will need full model number please use website to contact us on this
Very helpfull great tips, thankyou.Will definately watch more of your vids if I need too.
Really glad it helped you fix your problem Thank you for leaving a comment this is for you ruclips.net/user/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
I was really enjoying watching this video to help me repair my washing machine - until I got to the part where you mentioned getting ‘the wife’ to hold the metal spring in place. I am ‘the wife’ and was planning on fixing our washing machine myself. I will ask ‘my husband’ to hold the spring in place to help me. Thanks for the tip.
Im having issues getting my new seal on my beko wm 622 machine which is slightly different it also has 2 springs
Two hours I’ve been trying put final spring on . I just can’t do it myself😢😢😢