I really messed up this time.. I should never work on my own cars
HTML-код
- Опубликовано: 16 ноя 2019
- Got this awesome steering wheel from Carbontastic and I wanted to get it on right away but here's what happened lol.. (not funny)
Check out Carbontastic here!
www.realcarbontastic.com/
CAMERA EQUIPMENT I USE:
(These are affiliate links that I get a minor kickback from IF you were to buy any of the items below)
Main Vlogging Camera: Sony A6400
amzn.to/2YLHVJl
Sony 10-18mm lens:
amzn.to/2YCTeCO
Sony AX53 Handycam (4K)
amzn.to/2Xo0J3V
Sony AX33 Handycam (4K)
amzn.to/2FoidTC
External Mic: (With wind protector) for Sony AX33/53/6400
amzn.to/2J1IBU6
Canon GX7: (2nd Vlogging camera)
amzn.to/2LbvsdJ
ACTION CAMERAS:
GoPro Hero7 Black: (4K 60fps)
amzn.to/2XlDwPV
GoPro Hero5 Session: (4K 30fps) (Smaller size, good for POV videos)
amzn.to/2Fs77gp
GoPro Hero5: (4K 30fps)
amzn.to/2RtIOTN
DRONE: DJI MAVIC PRO:
amzn.to/2FtKNCO
DJI MAVIC 2 PRO:
amzn.to/2L7i6PO
COMPUTER I USE:
MacBook Pro I7 16GB RAM 512 GB SSD
amzn.to/2WXBYfn
EDITING SOFTWARE:
Final Cut Pro X:
amzn.to/2Xo1v0P
ACCESSORIES:
Tripod:
amzn.to/2WZRPoS
Suction Cups: (For GoPro’s, the one you get through GoPro sucks)
amzn.to/2WTJHpT
Camera Slider:
amzn.to/2WXoM5p
Become an AutoVlog Pro member!
- Early access to all content
- No ADS.. (what so ever)
- Exclusive content (Not showed on RUclips)
- Discount on Merch
autovlog.pro
New AutoVlog Merch!
shopautovlog.com
Follow on Social Media:
“Like” the Facebook page: / autovlog
Twitter: / autovlog
AutoVlog PO Box:
PO BOX 13070
Pittsburgh, PA - 15243 Авто/Мото
German cars and SAE sockets don’t like each other.
This has to be one of my favorite videos because I can relate 😂
doblleo
OMG, relate? oh yeah, it brought back many memories of my own fails! lol
Same
SAMEEE....Back seat issue with mt f10's dead battery
You needed a metric socket it wasn’t sae😂
Yeah but it will work for now😂😂😂
Oh snap, I didn’t even notice that he was using a 5/8” socket 😬
Use a professional regulated taxi, your helping uber destroy the taxi trade then they Can charge what they like and charge the drivers higher commission on every call.
@@brendanc5519 lol no thanks
It is a European car 😂😂
NOOOOO not the impact! I did a steering wheel swap on my M3 and had a hell of a time as well...but have to use a long breaker bar for leverage!!
You can use a impact on it just use the right damn socket no standard sae sockets metric sockets. Hell even the factory installers used a impact driver with lock tight on that bolt.
It helps to use a good quality precision socket of the correct size, plus, if you ever noticed, impact specific sockets are usually carbonized when they are forged, which makes them stiffer, and less likely to deform.
As well as the fact some people would argue the carbonized finish provides more friction over a chrome finish, making slippage/ rounding off less likely.
Breaker bar ftw. Less chances of mishaps
@@zfixation9817 and they are 6 point
Mike: Okay let's have this new steering wheel installed.
Mike: Oh snap! I messed up the freaking bolt!
Tavarish: left the conversation.
F - First
A - Attempt
I - In
L - Learning
If one never fails....one never learns.
VMAX1700 yeah... but you could rather learn from other’s 🤙🏼
X Rozip everyone makes mistakes. It’s not the mistakes that matter much though, it’s how one handles the mistakes and what one learns from them that really counts
And while yeah learning from other’s mistakes are fine, there isn’t a soul on earth that hasn’t made some of their own too. And if anyone tries to say they haven’t, well you automatically known at that very moment that person is not honest and not to be trusted lol 😂
also First Autozone In Lifetime if he didn't know to use metric tools for a Euro car.
For leverage slide a pipe over your ratchet that will increase your strength to loosen the bolt
No that wasnt the right socket. SAE, Standard American, is used on American cars, sometimes not even. Metric (MM) IS used on every other car. You used a 5/8" socket, should be a 13-15mm I'm not exactly sure. You should've used metric
Mazokki yes it probably was
@@Mazotheman metric and standard is slightly different...it has a little play in it
You are mostly correct but even modern American cars use metric
@@Mazotheman i believe the steeringwheel bolt is a 15mm if i remember correctly
That bolt be like: ima end this man's whole career. XD
But he says it in superhotfire voice
OMG! I have tears. Dude, as good as your regular content is, please continue to throw in one of these gems from time to time!!
Dont forget that bolt is one time use. If you remove it u have to replace it.
Yep especially when you strip it
You gotta call chrisfix 😂😂😂😂😂
sharif abu sharifeh “Heyy guyssss! ChrisFix here and today I’m gonna show you guys how to remove stripped bolts.”
🤣🤣🤣
made me laugh respect at you Mike for having the balls to upload this video 😎😎👍👍👍👍👍
Bro I laughed so hard. Thanks for that.
A for effort Mike. Bring to me, I can get it off......with the right size socket 🤔
PIPSBURGH VIEWS I might be wrong but wouldn’t this be a six point metric socket!? Lmao
I saw it coming when he pulled out the rattle gun without a metric socket
Get a bmw they said, its fun they said 😂😂😂
@@GNogueira83 Yes indeed it would
@@johannesduiker5053 mine is still fun!
metric bolt not a standard. That's why it stripped. Also a breaker bar with a 6" extension would help. It's likely got blue thread lock on it
And a witness mark.
16mm socket and breaker bar is the way to go... All about leverage.
It’s 15mm socket. I have a e60 m5
Then he was way off lol. 5/8” is equivalent to 16mm
No wonder why it stripped
Damn right breaker bar leverage beats impact tools all day
"And yes, I'm using the right socket" Euhm… unless this is that one BMW that doesn't have metric bolts, you weren't using the right socket.
Oh maaaaaaan, that part when you stripped the bolt lol. The music and everything and had me dying.
This upload just made my day! Im glad other ppl can have bad days! At least you were in good spirits about it! Keep up the good work!
The second I saw him pull out that impact wrench I knew he would strip it
18:32 😂😂😂 OMG IM DYING!! You should’ve just connected the seatbelt and that way it would’ve held the buckle in place while you did the other.
Stop fucking bullying scumbag
5:30 When my order takes 2 months to arrive.
I was having a bad day but when I watched your video, I think that my day was gr8!
Your Choice of analogy was hilarious 😂
I give you full respect posting video! I was literally dying laughing!! So freaking funny!!
Mike's neighbor: "Honey, you know our neighbor that starts all his loud cars bright and early? Well now he's screaming for the *UPS* driver. It's time to move!"
Probably the best video yet. Lot of fun to us viewers. I learned a long time ago that it cost me more to do it myself because when I screw it up it cost me more to get someone to fix it. Good luck!
Great video Mike! We've all been there breaking something when trying to upgrade our vehicles. You took it well. Hope it's an easy fix for someone.
Just missing the Benny Hill Theme Tune throughout this video!......
Lol
Yakety Sax
That’d be perfect!!!
🤣
Mike this was great Video, reminds me how many times I was in the same situation! We live and learn brother! Can’t wait to see the new steering wheel on ? Tell us how the hell did they get the bolt off. 👍
I know right. I wanna see how he gets it off
Great video Mike. Thanks for the laughs. I'm intrigued by what the new steering wheel is going to look like once installed... Keep up the good work!!!
Mike, that was very intertaining; I couldn't stop laughing! 🤗
Love it my brother. You are just learning your baby. Frustrating but funny. Much love!!!
Mike, as a carpenter I can do all sorts of home renovations. You remind me much like myself when I try to do some sort of small modification or simple maintenance on any of my vehicles or ATVs. I can sense your frustration.
You know when the power goes out at your home and you're walking around the house trying to turn on light switches or get light from the fridge or turn on the computer? I feel like that's what Mike feels like trying to get into his trunk and move the driver seat with the battery disconnected. :D
Can't stop laughing. I thought I was the only one with bad luck while repairing my car. Can't wait to see on how this ends.
No pain, no gain. The good news is that this is "fixable". Also, you are giving and "indirect advice" for those that want to try doing stuff in our cars to take a moment and evaluate if we need pay to get a job done instead of doing it ourselves.
Mike mike mike..... Lol this was by far one of your most ENTERTAINING videos i feel your pain man do stuff like that all the time... Glad im not alone😂
You can always hook up I jumper box (if you have one ) in the engine compartment to power the car and open trunk.
“Maybe I should move the seat” “I CANT DO THAT!” 😂
Nah I was too weak at this part 😭
This dude tears down the whole car apart just replace the steering wheel 😂😂
Stop fucking bullying scumbag
I’ve been there with the airbag issue. Took me forever to put back on. I wonder if the bolt is left handed threads? O well we live and learn. Worth the content for someone else that’s about to f-up😂👍🏽
You just gave new meaning to the saying "Bro you need professional help" 😂😂😂😂
At least I am not the only one who messes up working on my cars . I have had days like that where the car just says no lol . You made me laugh
U can get sockets for stripped bolts.....gator grip, bolt extractors, etc
I once replaced a tail light. Scariest thing ever but I got through it. You are a brave man, Mike. 🤣
Ahahah a I laughed so much at this, I see myself in this video a lot, when I try to fix something or diy something and then everything slaps you in the face 😂
Tech Toderici always that one last bolt😂
I feel the pain, I did the same to a bolt holding my touchscreen in my fusion. My sync 3 system went bad 10 days out of warranty and rather than pay them a grand to fix it I bought a salvage part installed it myself
🤣🤣🤣🤣 thanks Mike I could see that coming with the steering wheel.
it stripped because it isn't a sae bolt head lol it is metric
Best autovlog video ever 😂
The struggle is real! I'm the so way and so is everyone else their first time doing something. Great video bro! And thanks for being brave and posting it!
It seems as if anyone who has worked on cars has experienced similar issue. Its life and thanks for being normal and sharing..
I have successfully pulled mine off with both, an impact and also once in a pinch with a breaker bar, the latter being surprisingly easier than the impact.
Really enjoyed watching this. Made my day. I thought I was the only one who runs into stupid situations like those.
Brilliant..... Just like watching a video of myself trying to work on my cars, I haven't laughed so much for ages...
I've been watching since the 5 features you didnt know about your fusion video long time supporter and and happy to see your channel grow alot over time
I,m feeling with you Mike. Have te same . Working on my car is always a lot of stress and fail. Don’t feel stupid.
Best ... video ... ever! I mean, even the Mrs enjoyed watching this example of one of my "**** car videos". I think any of us who turn wrenches on our own cars eventually have one of those days you just wish you could hit the reset button and make it where that day never happened ... so yeah, been there, done that.
man, you make my day... I got to do some work like changing an alternator and Im like ugh it feels nice inside my place lol
Damm Mike you had me laughing my ass off! I bet next time you’ll take your car to the shop! The cars in the beginning of the video were epic thanks for sharing!🐟
@13.50 is me literally every time I work on my car. I hear you man
Stradman’s new car isn’t technically a “Stradale”.
They make special "Easy-Outs" for stripped bolt heads. Use one of those and a longer breaker bar for added leverage. also turn the wheel to lock so you don't need to hold it.
It’s all great. I’ve been working a bit on a Volvo S60R. I didn’t hear any real bad language and you didn’t toss the socket in the road or thru your garage door. So it’s all good. Live and learn. You should try a metric socket next? Hoping for a video of the fix.
I want one of those stables with red and white horses in my stable. Lord have Murci(elago)
Me too!!
Have not laughed so hard in a long time and he is right he needs professional help LOL
I’m glad I’m not the only one that say things like that when I work on my car. Lol. 👍🏼👍🏼
you are my favorite " HANDY MAN " LMAO
TIS manuals are online. When you remove the clock spring, you will have to reset the DME fault it will throw. Good luck.
Yeah! Nmmmm! Slaps buckle. Prick! 😂🤣😂🤣😂☠⚰ I laughed so hard Mike!
😂😂😂👌🏾that’s what we like to see you having a go and giving us jokes
Enjoyed the hell out of this, probably because I can relate on an oh-too-real level
A tip for not shutting the boot/trunk when the battery is disconnected, I leave a bit of cardboard in the back and place it over the latch/lock bit so the lid doesn't accidentally slam shut!
I replaced the same steering wheel on my E46 330i ZSP. The hardest part for me was getting the airbag out.
Mike, I’ve been following you for a couple of years and this is by far the funniest vid you’ve put on 😂. You’re trying to dance with a car and you have 2 left feet. Like you said leave the mechanics to the professional dancers and you be the narrator. 😁😂👍
Where's the follow up vid for getting the aftermarket steering wheel mounted? Thanks
Oh mike😂😂😂 that is the funniest video yet! Hope it ain’t to expensive getting that bolt out
Thank you. Excellent. I’m glad I’m not handy.
I removed my steering wheel on my M3 and the bolt is threaded backwards. You are actually over tightening the bolt. Lefty loosey does not apply in this situation.
German cars use Metric bolts! LOL. Get some Irwin Bolt Grip sockets on it if the correct sized 6 point metric socket doesn’t work.
I live in Scottsdale! There are so many nice cars here for some reason
Just hilarious! I love that you dont take yourself too seriously lol. Rofl! It looks like there is a cotorpin type device keeping that bolt in. Good ol BMW with no manual trunk release.
I've done the whole trunk/battery thing too.
Great video mike! You had me laughing 😂
Thought it was just me having a sh*t day Mike - clearly it wasn’t 🤣🤣🤪🤣🤣
Why would you turn on your wipers when there’s ice? 😥
Noooo not the trunk ! 😂 it gets better !
you made my day! just hilarious lol
You have to fail to learn no worries 😉 Mike
It's all a learning curve.... Nice to see people working on their own car. 👍
Hilarious video- love the slapstick content. 👍 Sorry about the hassle though. “What’s up now bit*h?” 😂
LOL! That was awesome, lol thanks Mike.
That bolt still has plenty of shape left to it. But you do want the exact sized socket for it. The impact wrench is fine too; there's actually less chance of bolt breakage with an impact.
Great Job Mike!! Hey listen, 95% of us wont even try the cool stuff you do! I like this video still
If you ever have to take the back seat out again, you can try fishing the seatbelt buckle through the hole in the seat clicking it into the clasp and then pulling the whole thing back through.
Lmao your reactions to the situations were hilarious
Use a smaller socket if the bolt strips
Oh Mike , pull set for steering wheel needed
Ricky bobby jus had himself a badd dayy lol