I've come back to this video at least 10 times and every time I learn something new as I'm digitizing my own. Thank you so much its so helpful. The combine holes saved me!
You are a life saver! I am new to digitizing and could not find any videos regarding logo lettering. I am so happy😁Thank you! Will be going straight home to give it a try.
Hi Brad. Been following you for a minute now. :) Learning how to digitize w my week-old StitchArtist 2. I'm sure you figured out what you did with that E by now. You created the exterior outline originally but forgot to close it. You closed it on the 2nd try that's why it worked. Hey, I'm paying attention!! Thank you for your videos. Learning lots!! ~lulu
Brad I watched this video and I digitized my son's electric company logo. You explained to be so simple and it was. I did in 5 minutes what I have been trying to reading the manual and was lost. My first digitizing program I learned was PCD with Patti Porter in early 90's and that was so hard but I figured it out.But this video struck my brain and it computed. I am finished thank you so much .You have a new subscriber I have a Janome 550 now and use Embrillance on my Mac.I have StitchArtist2
Brad, I love this video... I just purchased a used SWF machine (1 needle, 12 thread machine).. I created a new design.. got it running.. to begin with it went perfect.. then changed colors .. it runs a few seconds, then stops.. comes up thread break.. which it is not..Ihit start and it goes through the same thing.. if I hold the run down, it runs slow, but does not stop.. What is my problem???
Good morning Brad,I have been trying to do the running stitch and it is not working for me. I did what you showed in the video is their more to it that Im missing? Also Im very new to this how do you remove last stitch with out hving to redo everything? Im running this on MAC also.
Hello there new to your channel and I have a question, I have a logo that I am trying to digitize that has holes in the actual logo is there a way to still digitize? I'm so lost and want to help this customer of mine... Thank you
I need help!! I made a logo.. the first 7 letters are red and should be all stitched out you know without stopping. Well it stops After every letter. Soo annoying!! How can i get it to where all the letters can stitch without stopping??? Obviously until i get to the next color. TIA!!
This video was very informative. However, when I tried to import a design to digitize in Creator, it would not recognize my jpg images. I am on a mac. Any comments or suggestions?
What is the exact name of this program, I been trying to find software for a while and I can't find any helpful info, this software seems much simpler than other and user friendly, please help if you can thank you
I've come back to this video at least 10 times and every time I learn something new as I'm digitizing my own. Thank you so much its so helpful. The combine holes saved me!
You are a life saver! I am new to digitizing and could not find any videos regarding logo lettering. I am so happy😁Thank you! Will be going straight home to give it a try.
Hi Brad. Been following you for a minute now. :) Learning how to digitize w my week-old StitchArtist 2. I'm sure you figured out what you did with that E by now. You created the exterior outline originally but forgot to close it. You closed it on the 2nd try that's why it worked. Hey, I'm paying attention!! Thank you for your videos. Learning lots!! ~lulu
Hello, Visit my site for digitizing work dynamicdezign.com/
Any kind of design you need, Email us: sam.dynamicdezign@gmail.com.
Brad I watched this video and I digitized my son's electric company logo. You explained to be so simple and it was. I did in 5 minutes what I have been trying to reading the manual and was lost. My first digitizing program I learned was PCD with Patti Porter in early 90's and that was so hard but I figured it out.But this video struck my brain and it computed. I am finished thank you so much .You have a new subscriber I have a Janome 550 now and use Embrillance on my Mac.I have StitchArtist2
good ideo watched alot of videos beside the creator of it and you explain things well.
Brad, you’re the best! Just what I needed to get digitizing!
thanks for this. i really hope your vid helps me in inkscape. not many videos explain start to finish like yours does
is it sometimes easier to add a comparable bx block font (or comparable font) for the 'lawn care llc' part rather than manually creating it?
thank you for all videos! is very helpful! I'm very happy with my new design!
Thanks, you make it seam so easy.❤
Hey Brad, Thank you so much for all of this information. You are the best!
Hi what is the program name and how can I get it
Thank you
Good video thanks looks good
Brad, I love this video... I just purchased a used SWF machine (1 needle, 12 thread machine).. I created a new design.. got it running.. to begin with it went perfect.. then changed colors .. it runs a few seconds, then stops.. comes up thread break.. which it is not..Ihit start and it goes through the same thing.. if I hold the run down, it runs slow, but does not stop.. What is my problem???
i have never used one of those machines, not sure what would cause that
Good morning Brad,I have been trying to do the running stitch and it is not working for me. I did what you showed in the video is their more to it that Im missing? Also Im very new to this how do you remove last stitch with out hving to redo everything? Im running this on MAC also.
Hello there new to your channel and I have a question, I have a logo that I am trying to digitize that has holes in the actual logo is there a way to still digitize? I'm so lost and want to help this customer of mine... Thank you
excellent thank you
I need help!! I made a logo.. the first 7 letters are red and should be all stitched out you know without stopping. Well it stops After every letter. Soo annoying!! How can i get it to where all the letters can stitch without stopping??? Obviously until i get to the next color. TIA!!
Thanks so much am new to all this and your videos are so helpful
Hello, Visit my site for digitizing work dynamicdezign.com/
Any kind of design you need, Email us: sam.dynamicdezign@gmail.com.
What is he smallest logo for a shirt can i make Please?
Thanks
Is this with Embrillance stitch artist ?
This video was very informative. However, when I tried to import a design to digitize in Creator, it would not recognize my jpg images. I am on a mac. Any comments or suggestions?
What is the exact name of this program, I been trying to find software for a while and I can't find any helpful info, this software seems much simpler than other and user friendly, please help if you can thank you
Thanks dude!