Love watching your build series, as well as tips, and tool series, they are very helpful for noobs like me, it makes it less intimidating to experiment, and learn what to go for and why, thanks for your work.
Could you make a video showing how the suspension mods work? Maybe in an indoor setting just to show it at work. It is a cool concept, I'd like to see it in action! Thanks!
Any chance you could do an update video of any changes and show how it performs on the rocks? Lobe your videos. I'm putting together a scx10ii now and look to your videos for tips and setups. Thank you and keep up the great work!
So to be able to swap that motor around and clean it up a bit all I would need is the Atlas T-Case and the motor mount? I also don't like the stock setup on the SCX10II kit.
That is a beautiful looking set up. I can no longer own something like that and then take it out and drag it over the rocks. I now have several shelf queens because of this obsession. I now try to buy my rigs used so I don’t feel bad for completely scarfing them up when having fun
What a great looking rig you got there I like a little scaling too but I am a monster truck fanatic so my scale vehicles are monster trucks and plus it makes me a little different from everybody else.
Man I wish I watched this before I bought my LC70 body and scx10.2 kit. No biggie I’m building an RC4WD rig for the body but really wanted it to fit the scx10 with full interior.
I was just working on this style shock mount in the back and stumbled on this! Great to see everything in place and working but you didn't specify the shocks. Are those larger diameter? They are Proline, right?
It's already completed...kind of hard to re-do it to film! lol Just take your time and unbolt everything from the chassis rails. Flip it and bolt t back in
With the transmission facing the opposite direction, did you have to reverse the direction of the ESC? If so, did you reverse it during programming with the Castle Link, or on your radio?
TheAlonzof in stock formation, you can prove together a front driveshaft from MIP. The issue on the rear side of the transmission is the clearance. MIP would have to completely redesign a output to fit. No current MIP output will fit....I tried! Sticking with the stock is the only option as of now. All the other offerings are in my opinion a downgrade.
The RCNetwork, have you seen the MIP driveshaft for the TRX 4? I bought some of those for my new Bronco TRX4 and they are vastly different in design. They don’t have the large cupped ends. I bet that will work. Is it the clearance at the skid plate you have issues with?
NICE BUILD Richard!!! My question is what MIP part numbers did you use for the drive shafts? I know that the kit versions are a little tricky. Thank you!
Nice kit build but did say the LC70 was too small for this kit. I don't know why killer body didn't scale it up to fit more popular kits (SCX-10) Big $$ tuff crawler you have there👍👍
The RCNetwork This body is 1/10 scale the SCX-10 II is more like 1/9 scale The Axles are too wide Yota axles only just fit under it & yes you need to put 1.55 wheel & tyre combo on it if you won't the scale looks it is such a shame that this body was made in 1/9 scale to fit the SCX-10 chassis better Looking forward to seeing what body you put on it 👍🏻👍
Mat K it's advertised to fit the SCX10/ii and the TF2 LWB. When this was ordered there was no existing info other than the photos on KB's website. Running 1.55's looks great for scale, but I'm going more for performance and running 1.9's with decent tires is a must.
How long do you think one battery will last like the amount of time you will be able to drive the truck for just curious because I'm looking into build an rc but I want to know what's the best setup to go for to be able to get the most drive time out of it as possible
Rich I must know what servo horn u used for that Holms hobby servo! I have been shopping around for a 25 tooth just need some advice for a good one that will for my crc scx10 ii
Two kinds of people: -spending 120$ on wheels without hub or center ring, "but they are licensed and from Vanquish" -buying 4 wheels with hubs and center rings for 30$ on Aliexpress, just the white letters are missing Same with capra axles: -xtra speed/ kyx:
Back when this video was made, there wasn't too many options like today, especially for exact duplicate wheels (minus the lettering). I recently priced these exact wheels on VP's site and after tax and shipping (hardware and SLW's) the price was $196 for a set of 4. I have recently bought 4 sets of eBay wheels (I DON'T trust Aliexpress, BangGood or GearBest) - including all hardware, SLW's, etc for about $35-$40 a set. AND they're metric! Times have changed - I value VP's quality, engineering and licensing, but the pricing is ridiculous in comparison. VP does set out to improve a part - engineering wise and they do test it for months. Many of these off-shoot companies either make duplicate aluminum/brass parts (Xerox of the plastic). I still have these wheels, but sold the truck off - the one thing good about VP is you do not lose value, ever - I got right about what I paid for it
never ever thought of buggy shocks on a scale rig smart may consider it myself.. ya a put the Holmes hobbies (exact)esc but a 2300 kV stubby motor and in my bomber it has plenty of wheel speed on 4s that would be a dream rig for me rn love you work
If anybody can help me out. I replaced my servo in my scx10 ii with the same exact servo and im getting no responce. What should i do. Any help would be awesome
cool rig. I was so excited for something that wasn't. I would love to see an absolute crazy Hop Up kit to build. And would pay the money if axial was to do. With a name like that you'd think that they would go for it
Yeah, I agree on the package deal....it would just be a novel idea, since many people these days piss and moan on pricing....but then end up spending that much anyways! lol
Oh I sob uncontrollably whenever I see this. I can't find a SCX 10 2 kit anywhere in the world! I even thought I'd try the RTR, not my thing, but then strip it and hop it up. But no RTRs either. The closest I got was a shop in Florida, but they don't ship internationally, and don't respond to correspondence. I found one one RUclips for nearly $900, but I thinks its gone now as well! By the time it's running that's a $1500 machine, without hopping it up. 😭😭😭😭😭😭
Garszy Yer it's pretty shit that theses kits have been hard to get since they released them I had to wait 3 months for my kit. Pretty crap on Axial's part
jake beavs yeah, but then I’d have an RC that would barely be put together, drive terribly and if it breaks, Be out for weeks waiting on parts that probably don’t exist.
all a matter of opinion that's why there comment section. not trying to hurt your feelers Id just rather have something actually GOOD for that kinda money.@@TheRCNetwork
jake beavs there’s been several reviews of the Capo rigs saying how awful they were - directions, parts fitment, etc - one was Harley Designs, the other by Velocity Magazine (they built it for a reader that couldn’t finish it). No feelings hurt....I’ve dealt with shitty comments (mostly the commenters) on RUclips for years.
im sure theres serveral reviews on the axial not being up to par as well. if you look for faults you will find them in any design. id rather have the capo cause it's innovative, one of a kind and quality parts right off the bat. you would rather have a axial lets leave it at that. @@TheRCNetwork
@@jakebeavs4436 this guy gets his feelings hurt very easily. I said "nice way to spend 2000 dollars!" And he got butthurt. I know 3 other people that said the same thing. Same results. He gets defensive even though it's a compliment. This dude seems to have very serious mental issues. I'd venture depression social anxiety and more. Me and my friends have posted other compliments as well with the exact same results. He gets defensive and weird about it. Just watch. The way he denies it will speak volumes. Just wait and see.
OMG give us an update!!! Please i need it man!!! I feel like a girl waiting on Beyonce's twins to arrive. Also if you like jeeps...im sure you do, try n grab a new bright jk and possibly show how u mount it on this set up maybe (stewies voice 1 breath)
Working on it, my friend! Just ordered the wrap and getting the interior installed. It's been a labor of love....Actually switched some things around. Stay tuned!
jeffry jenkins it was my personal build outside of shooting videos - originally, I wasn’t going to even film this series....also why there’s no next episode. It’s also my hobby.
I'm okay with the fact that you use high quality products, but saying "you can't beat proline" or "you can't beat vanquish" is, firstly, only your opinion, and secondly, there's is so much other manufacturers that provides high quality products for much cheaper than the ones you use ! So don't crap on the rest of the world because you think paying almost 200$ for 4 rims makes a rig better than another that has 50$ wheels, even if the quality is the same ! Thanks !!!
Thanks for commenting. "you can't beat...." yes is my opinion on my "free to watch" video. I don't think I ever "crapped" on another brand by making my statements in this video. Lastly, the VP wheels I showed in this video are $59 for 2 (quick math: $120 for 4) so not nearly you're quoted $200. I also never said that these were better than cheaper alternatives, although I do think they look better and are actually licensed replicas. The importance of the hobby is to have fun - and this is my fun: wrenching on my RC's and showing it through video.
The RCNetwork I actually live in Europe and it's absolutely impossible to find any beadlocks from vanquish for under 90$ here (and I don't count the taxes added to it and the shipping). I'm not crapping on your video, of course it's free to watch and of course I'm not forced to see it... I just don't agree with the fact that VP and Proline are the best (they are great don't misunderstand me) but that's my opinion. Finally, I agree that the thing with RC is to have fun, there's no doubt about that. That being said, wish you the best for the future !
The video it's just an add, repetitively doing the same thing over and over. I see it on youtube more and more and it's not good. Thankfully we all have the choice to move on to something better or more entertaining. A lot of you information is quality, but just delivered in an infomercial way. Does that answer it? Be great to see more outdoor action with your trucks, just my opinion, sorry if l have offended you. Cheers
paul edwards you haven’t offended me, but you don’t realize (like many viewers) that’s there’s a person here. I make these videos as a hobby. No one pays me. Whether you think it’s an “add” it’s not....many people were curious on a different shock mount for the rear and mirroring the trans. This was a personal build I put a lot of time and effort into it, and thought sharing it on RUclips was the next step. And yes, you do have a choice on what you view - happy new year...
l didn't realize, thanks for clearing that up. You do things with passion and we all like that. Your Proline reviews are spot on and have been very helpful. Sorry for coming across a bit off in the first comment. It's almost to easy to comment sometimes. We have done the Mirror and flip on our first gen SCX10's. Then moved the tranny across a little which lines up the drive shafts perfectly straight. This allows the ability to lay the battery down nice and low beside the transmission in the belly of the chassis. A big win all round, lower centre of gravity by a long way, much smother and importantly efficient operation in the drive line, just like the HPI Venture. The running of the truck in this layout is so so much better, night and day difference. Cheers
Unfortunately no....but Axial Racing got quite a few inquiries that day! lol Goes to show what people really want! I do have a complete parts list in the video description though....
Love watching your build series, as well as tips, and tool series, they are very helpful for noobs like me, it makes it less intimidating to experiment, and learn what to go for and why, thanks for your work.
And thanks for watching drog! It's great to bring fresh RC content.....there's many channels that don't upload regularly like The RCNetwork!
Could you make a video showing how the suspension mods work? Maybe in an indoor setting just to show it at work. It is a cool concept, I'd like to see it in action! Thanks!
I like this video because it showed me exactly how to wire power direct to the servo👍
Glad to help
Any chance you could do an update video of any changes and show how it performs on the rocks? Lobe your videos. I'm putting together a scx10ii now and look to your videos for tips and setups. Thank you and keep up the great work!
So to be able to swap that motor around and clean it up a bit all I would need is the Atlas T-Case and the motor mount? I also don't like the stock setup on the SCX10II kit.
buddy you built everyone's dream scx10ii.....wonderful build....love it
Thanks Rick! This was my personal project truck...taking my time on it. Started during Christmas...still have ton to do on it
Great looking build! Can't wait to see it on the trail trail! Let's get it dirty!
I agree! Need some more details done though
The RCNetwork I totally get that! If you're like me, they never see the outdoors until I'm happy with them!
This is still an epic build
Thanks Jonny!
good looking truck... can't wait to see it run
Thanks CCRCinc!
That is a beautiful looking set up. I can no longer own something like that and then take it out and drag it over the rocks. I now have several shelf queens because of this obsession. I now try to buy my rigs used so I don’t feel bad for completely scarfing them up when having fun
Nice, yeah, I'm the same way to a degree. I still haven't run my Spawnzilla
What a great looking rig you got there I like a little scaling too but I am a monster truck fanatic so my scale vehicles are monster trucks and plus it makes me a little different from everybody else.
Nice! Thanks for the compliments on the rig...it's almost done! lol
Man I wish I watched this before I bought my LC70 body and scx10.2 kit. No biggie I’m building an RC4WD rig for the body but really wanted it to fit the scx10 with full interior.
Nice vid, thanks for new ideas 👍
Glad to help out!
Do the rear shock mount on the frame help out. I may be able to run this style but do not want to raise the truck up
Yes, they just mount diagonally....picking the right length shock should not raise the truck
I know this is a little older video... why not use the bowhouse rc mirror transmission bracket and battery tray/bumper and servo mount???
Great video , do you have a link for the shocks ?
Sweet rig man 😋
Thanks 👍
You always do amazing things with these RCs 👍🏼
Did you flip the transmission by flipping the transmission plate? Not addicional parts required to buy?
Yes, flipping the skid and trans will make that happen. You will need to figure out a battery box though
@@TheRCNetwork awesome thanks
Hey man any update to that build of yours?
I was just working on this style shock mount in the back and stumbled on this! Great to see everything in place and working but you didn't specify the shocks. Are those larger diameter? They are Proline, right?
They're the Pro-Line Pro-Spec shocks...which might be harder to find now. The rears were the buggy fronts, if I remember right
hmm, i like those shock standoffs. the truck looks great overall. im interested to see what you put on it for a body.
Up coming episode! Stay tuned!
Your style of video is by far my favorite!
Thanks buddy!
I keep coming back to this vid, great job👍🏻the Vanquish Stuff is so nice, it’s all nice😁I like the layout.
What’s rear shock len
His builds are nice and clean👍🏽
Thanks!
Is the PROLINE product used PRO6267-01?
Very nice rig and great video!
Thanks CC's!
Would please do a video on mirroring the transmission on the SXC10 II kit?
It's already completed...kind of hard to re-do it to film! lol Just take your time and unbolt everything from the chassis rails. Flip it and bolt t back in
Nice truck. No offense meant but that's not really a mirrored trans set up. That's just flipping the trans. Still works for your application though.
Do you think those standoffs will work with proline scaler shocks?
They should - the hole sizes are the same
Awesome thanks man, building a wraith and got some scalers off a buddy just didn't have the stock standoffs with them.
I added a couple of o-rings on either side as a cushion since the stand offs were aluminum and the caps are aluminum
Yeah I seen that good idea, I'll probably do the same! I'm guessing there shock o-rings?
@@johnyarnall5882 Yep just extra 0 rings I had laying around
Take a look at bowhouse rc for the supporting bar under the transmission.
Yep, I have checked out Bowhouse.....but decided to switch the trans back for now....since I'm running a different body than before
The RCNetwork ahh i see. Sometime stock position is best. I know the worries that come with out having a cover for the trans
@@JeanIIDeux I run an open spur work zero worries. Never had a single issue arise.
Sick whip!!
what lengths shock absorbers did you use on the scx 10 ?
95mm
thanks for that I am building up a SCX 10 with aftermarket parts.
With the transmission facing the opposite direction, did you have to reverse the direction of the ESC? If so, did you reverse it during programming with the Castle Link, or on your radio?
I'll find that out once I fire it up! lol It's easy to do in castlelink or the controller
MIP still doesn’t have driveshafts for the “SCX10II” kit version. Do you know if any of the other SCX10 driveshaft kits from MIP will work?
TheAlonzof in stock formation, you can prove together a front driveshaft from MIP. The issue on the rear side of the transmission is the clearance. MIP would have to completely redesign a output to fit. No current MIP output will fit....I tried! Sticking with the stock is the only option as of now. All the other offerings are in my opinion a downgrade.
The RCNetwork, have you seen the MIP driveshaft for the TRX 4? I bought some of those for my new Bronco TRX4 and they are vastly different in design. They don’t have the large cupped ends. I bet that will work. Is it the clearance at the skid plate you have issues with?
Why no hyrax 4.19?
NICE BUILD Richard!!! My question is what MIP part numbers did you use for the drive shafts? I know that the kit versions are a little tricky. Thank you!
Is on axel or chassis servo “better”?
It depends. Servo on axle is more precise, performs better and has less issues. CMS, when set up right, looks more scale and performs well
Where u got the front body post from I need those for the rear and front to fit my scx10.1 body into the scx10.2
nando nando they were from the SCX10ii kit
@@TheRCNetwork is it this one AXIC3191 I got mine second hand but I have Bodies of the first one I would like to use
nando nando that is it. I believe it gives you several options for both SCX10 and SCX10ii
Nice kit build but did say the LC70 was too small for this kit. I don't know why killer body didn't scale it up to fit more popular kits (SCX-10)
Big $$ tuff crawler you have there👍👍
It's not too small...just requires either terribly small tires or raised ridiculously up to fit normal 1.9" tires
The RCNetwork
This body is 1/10 scale the SCX-10 II is more like 1/9 scale
The Axles are too wide Yota axles only just fit under it & yes you need to put 1.55 wheel & tyre combo on it if you won't the scale looks it is such a shame that this body was made in 1/9 scale to fit the SCX-10 chassis better
Looking forward to seeing what body you put on it 👍🏻👍
Mat K it's advertised to fit the SCX10/ii and the TF2 LWB. When this was ordered there was no existing info other than the photos on KB's website. Running 1.55's looks great for scale, but I'm going more for performance and running 1.9's with decent tires is a must.
does the scx10 and the scx10 II run the same MIP drive shafts ?
Swwwwweeeeeet !! love it. great looking rig. thank for your work,very helpful. love your tool series too.
Did you have any issues mounting the tires to the wheels?
Dustin Lanier nope, not at all - checknoit this video on how I mount my Hyrax’s - ruclips.net/video/iZxdsIwtFEU/видео.html
I want that esc too...
But it isn't available anywhere😔
Yeah, not sure what happened with Holmes and his ESC's - they all seemed to be CC based, but he hasn't had them for a while
how long are the shocks??? Front an rear.
They're buggy rears in the front and buggy fronts in the rear (in a cantilever position). Not sure if PL still has them on the site though....
@@TheRCNetwork and the dimensions
How long do you think one battery will last like the amount of time you will be able to drive the truck for just curious because I'm looking into build an rc but I want to know what's the best setup to go for to be able to get the most drive time out of it as possible
Stock configuration? about an hour with a 5000mah
Sir ? how much did this cost you? If u will estimate all? Thank u
Please don't make me.....a lot. Subscribe, and I'll consider it
Rich I must know what servo horn u used for that Holms hobby servo! I have been shopping around for a 25 tooth just need some advice for a good one that will for my crc scx10 ii
It's the Axial Hard Anodized 25t
Rich :13 sec in and I have to say this things awesome!
Thanks sp..This was a Christmas build....and now it's March! Still got a long ways to go!
Two kinds of people:
-spending 120$ on wheels without hub or center ring, "but they are licensed and from Vanquish"
-buying 4 wheels with hubs and center rings for 30$ on Aliexpress, just the white letters are missing
Same with capra axles:
-xtra speed/ kyx:
Back when this video was made, there wasn't too many options like today, especially for exact duplicate wheels (minus the lettering). I recently priced these exact wheels on VP's site and after tax and shipping (hardware and SLW's) the price was $196 for a set of 4. I have recently bought 4 sets of eBay wheels (I DON'T trust Aliexpress, BangGood or GearBest) - including all hardware, SLW's, etc for about $35-$40 a set. AND they're metric! Times have changed - I value VP's quality, engineering and licensing, but the pricing is ridiculous in comparison. VP does set out to improve a part - engineering wise and they do test it for months. Many of these off-shoot companies either make duplicate aluminum/brass parts (Xerox of the plastic). I still have these wheels, but sold the truck off - the one thing good about VP is you do not lose value, ever - I got right about what I paid for it
Looks good although, your tires are backwards lol
Funny!
You're welcome.
What rear shocks are those?
They're Pro-Spec Shocks from Pro-Line for the front of a 1/10th buggy
@@TheRCNetwork have you got links to these? can you tell me the front and rear length?
What are the shocks?
It's in the video...Pro-Line ProSpec Buggy shocks
whats rimm size on that
These are 1.9" VP wheels
Amazing Job rich, very good looking. Very pricey tho lol
My vanquish link ends hit the scx10.2 axel differential I am not too happy with them
Mine don't. Sounds like a build error.
Could be build error.
Yeah, I'd double check the manual on that
Can I put 1.9 scx10 tire on 1.9 scx10 II rim
Yes
never ever thought of buggy shocks on a scale rig smart may consider it myself.. ya a put the Holmes hobbies (exact)esc but a 2300 kV stubby motor and in my bomber it has plenty of wheel speed on 4s that would be a dream rig for me rn love you work
your*
It's very smooth and surprisingly works great! Thanks for the great compliments!
If anybody can help me out. I replaced my servo in my scx10 ii with the same exact servo and im getting no responce. What should i do. Any help would be awesome
Joshua Mitchell recalibrate
It is 2 speed. Isn't it?
Amazing video, subed
awesome
Why did you mirror the trans again? Where did you purchase most of your parts?? I love this truck and want to build one just like it!!
cool rig. I was so excited for something that wasn't. I would love to see an absolute crazy Hop Up kit to build. And would pay the money if axial was to do. With a name like that you'd think that they would go for it
Yeah, I agree on the package deal....it would just be a novel idea, since many people these days piss and moan on pricing....but then end up spending that much anyways! lol
wait, didn't you post this a few weeks ago?
Slightly...I mistakenly uploaded this last week.....it was up for about 10 minutes....its now up officially!
Oh I sob uncontrollably whenever I see this.
I can't find a SCX 10 2 kit anywhere in the world!
I even thought I'd try the RTR, not my thing, but then strip it and hop it up.
But no RTRs either.
The closest I got was a shop in Florida, but they don't ship internationally, and don't respond to correspondence.
I found one one RUclips for nearly $900, but I thinks its gone now as well! By the time it's running that's a $1500 machine, without hopping it up.
😭😭😭😭😭😭
Yikes....Yeah, I keep haring they're getting hard to find
Garszy
Yer it's pretty shit that theses kits have been hard to get since they released them I had to wait 3 months for my kit. Pretty crap on Axial's part
Mat K I had no issue getting mine....ordered mine around Christmas from Tower....got it 3 days later....
Try my local shop victory hobbies in deerpark,Texas i think they had a few on the shelf and some trx4 sport kits as well
you could almost get a capo ace 1 for the price with all them upgrades
jake beavs yeah, but then I’d have an RC that would barely be put together, drive terribly and if it breaks, Be out for weeks waiting on parts that probably don’t exist.
all a matter of opinion that's why there comment section. not trying to hurt your feelers Id just rather have something actually GOOD for that kinda money.@@TheRCNetwork
jake beavs there’s been several reviews of the Capo rigs saying how awful they were - directions, parts fitment, etc - one was Harley Designs, the other by Velocity Magazine (they built it for a reader that couldn’t finish it). No feelings hurt....I’ve dealt with shitty comments (mostly the commenters) on RUclips for years.
im sure theres serveral reviews on the axial not being up to par as well. if you look for faults you will find them in any design. id rather have the capo cause it's innovative, one of a kind and quality parts right off the bat. you would rather have a axial lets leave it at that. @@TheRCNetwork
@@jakebeavs4436 this guy gets his feelings hurt very easily. I said "nice way to spend 2000 dollars!" And he got butthurt. I know 3 other people that said the same thing. Same results. He gets defensive even though it's a compliment. This dude seems to have very serious mental issues. I'd venture depression social anxiety and more. Me and my friends have posted other compliments as well with the exact same results. He gets defensive and weird about it. Just watch. The way he denies it will speak volumes. Just wait and see.
Thats the sexiest freakin scx i have ever seen
Thanks buddy! this was a personal build, that ended up never being finished - you know the car mechanic that never has a good functioning car?
OMG give us an update!!! Please i need it man!!! I feel like a girl waiting on Beyonce's twins to arrive. Also if you like jeeps...im sure you do, try n grab a new bright jk and possibly show how u mount it on this set up maybe (stewies voice 1 breath)
Working on it, my friend! Just ordered the wrap and getting the interior installed. It's been a labor of love....Actually switched some things around. Stay tuned!
The RCNetwork this is easily the best looking scx10ii build to date loving your work bud. Your inspiring me to get back onto the hobby.
Sweet way to spend 2000 dollars!
jeffry jenkins it was my personal build outside of shooting videos - originally, I wasn’t going to even film this series....also why there’s no next episode. It’s also my hobby.
@@TheRCNetwork Yeah I remember when RC was a hobby to me. For the past 20 years it's been a way of life. 👍
rc4wd > Vanquish
*change my mind*
Leif Tastad one of my first crawlers was an RC4WD Gelande II -that was 4+ years ago......last RC4WD I had....
Billet > cast
And yet a trx-4 or even the diffender out of the box beats it...but yes it is a nice build
Quite possibly, but this one will look damn good! lol
omg, those part from holmes hobbies is too pricey. but i kind of like this sc10ii looks awesome.
They're brushless, sensored and waterproof....that's the "trifecta" of electronics!
only if your pinion grabs that lipo...
The pinion is pretty far away
What's up with that intro music?... sounds like Nipsey's voice for a sec their
Not sure, I use all sorts of non-copyright music
show us the flex
Soon, very soon! lol
why are you reposting this?
It was posted last week by mistake....once posted, it wouldn't let me re-post as new, so had to re-upload. You were one of the 43 original views?
The RCNetwork yes sir i was and i freaking love the truck and i was the first person to see, like and comment on this video
Thanks Israel!
The RCNetwork Nice Video. Whats your Favorit 1/8 scale Buggy?
Daniel Strehl if you are asking me i like the Losi 8ight-E
Someone just burnt through a grand on there truck
Probably even more....
I'm okay with the fact that you use high quality products, but saying "you can't beat proline" or "you can't beat vanquish" is, firstly, only your opinion, and secondly, there's is so much other manufacturers that provides high quality products for much cheaper than the ones you use ! So don't crap on the rest of the world because you think paying almost 200$ for 4 rims makes a rig better than another that has 50$ wheels, even if the quality is the same ! Thanks !!!
Thanks for commenting. "you can't beat...." yes is my opinion on my "free to watch" video. I don't think I ever "crapped" on another brand by making my statements in this video. Lastly, the VP wheels I showed in this video are $59 for 2 (quick math: $120 for 4) so not nearly you're quoted $200. I also never said that these were better than cheaper alternatives, although I do think they look better and are actually licensed replicas. The importance of the hobby is to have fun - and this is my fun: wrenching on my RC's and showing it through video.
The RCNetwork I actually live in Europe and it's absolutely impossible to find any beadlocks from vanquish for under 90$ here (and I don't count the taxes added to it and the shipping). I'm not crapping on your video, of course it's free to watch and of course I'm not forced to see it...
I just don't agree with the fact that VP and Proline are the best (they are great don't misunderstand me) but that's my opinion.
Finally, I agree that the thing with RC is to have fun, there's no doubt about that.
That being said, wish you the best for the future !
Metalmac a great alternative in Europe are the SSD wheels - They’re based in the UK. They’re not as scales looking, but a great quality. Cheers😃
He “actually” lives in Europe .... I “literally” live in The United States .
not another video add, subtle as a train wreck!!!
paul edwards What is that comment supposed to mean Paul?
The video it's just an add, repetitively doing the same thing over and over. I see it on youtube more and more and it's not good. Thankfully we all have the choice to move on to something better or more entertaining.
A lot of you information is quality, but just delivered in an infomercial way. Does that answer it?
Be great to see more outdoor action with your trucks, just my opinion, sorry if l have offended you.
Cheers
paul edwards you haven’t offended me, but you don’t realize (like many viewers) that’s there’s a person here. I make these videos as a hobby. No one pays me. Whether you think it’s an “add” it’s not....many people were curious on a different shock mount for the rear and mirroring the trans. This was a personal build I put a lot of time and effort into it, and thought sharing it on RUclips was the next step. And yes, you do have a choice on what you view - happy new year...
l didn't realize, thanks for clearing that up. You do things with passion and we all like that.
Your Proline reviews are spot on and have been very helpful. Sorry for coming across a bit off in the first comment. It's almost to easy to comment sometimes.
We have done the Mirror and flip on our first gen SCX10's. Then moved the tranny across a little which lines up the drive shafts perfectly straight. This allows the ability to lay the battery down nice and low beside the transmission in the belly of the chassis. A big win all round, lower centre of gravity by a long way, much smother and importantly efficient operation in the drive line, just like the HPI Venture. The running of the truck in this layout is so so much better, night and day difference.
Cheers
frustratingly, l can't believe Axial didn't fix this with the gen 2, but hey, what can l say. Axial sitting on there hands has become a bad habit.
Last...
There's no such thing as a scx10 2 limited edition
Unfortunately no....but Axial Racing got quite a few inquiries that day! lol Goes to show what people really want! I do have a complete parts list in the video description though....
What's with the old school porn music? lol...great job on the scx.
Peter Karv can't go wrong with a little "bowmp chicka wow-wow" 😉
Brown chicken brown cow...
robert cupp hahaha, it never gets old!
Thanks Peter...royalty free music...
I always read it homeless hobbie😂
It's named after John Holmes - the owner.
@@TheRCNetwork Thanks, I didn't mean to offend anyone.
Vanquish junk
Makaveli 187 #noclue
It's not junk but its insanely overpriced for sure!
1500 dollars
Which battery box is that?