Honda Fit Bumper and Headlight Removal and Replacement
HTML-код
- Опубликовано: 3 фев 2017
- Updated Links:
Honda Fit Drivers Side Light Assembly - amzn.to/3cEHms9
Honda Fit Passengers Side Light Assembly - amzn.to/2Iw5cZ1
Pair of lights: amzn.to/38odi3r
Light Bulbs (if needed): geni.us/2005-14_Bulbs
Bumper Support Clip (in case yours breaks): amzn.to/2O941Wc
Tools:
Replacement Fasteners 240pcs kit - geni.us/Fasteners_240pcs_kit
Panel Removal Tools (orange) - geni.us/Orange_Panel_Removers
Plastic Fastener Removal Tool - geni.us/Fastener_Remover_35260
Special! Amazon Prime 30-Day Free Trial. Get everything shipped for free:
geni.us/Free_Amazon_Prime
Today I removed the bumper and headlights from my 2008 Honda Fit.
You don't have to completely remove the bumper. You can leave all the bottom clips in place and just pull the bumper forward after you remove the top and side clips. Removing the whole bumper gives you nice access to the motor if you need to do a bunch of work in there like a valve adjustment...
The above links are Amazon Affiliated which meanes that I get a small commission when you use these links. It doesn't cost you anything, but it does support this channel. Thanks so much!
Dan
dtdw@danholt.net 
Авто/Мото
Best video for this job -- all the steps covered.
Those clips on that piece below the headlight are made of cotton candy and prayers.
Yup, and perhaps a few spider web nests... That's why I put the links in the description so you can buy replacements...
@@DansWay My Fit has over 300k miles, the only thing holding on my bumper cover is the 4 clips under the hood, all the other stuff has broken and I no longer have inner fender wells. It's lowered so I'm fine with it, only drive it on nice days. Makes working on things a lot easier. :D
Wow - awesome video. You only spoke about the things that mattered, you gave good previews before you actually did the work, and you explained things very well. Thanks - great video!
You should post more videos too.. excellent video very helpful I opened my 05 honda city saloon bumper after watching this before i had no idea.. thanks
I have a Honda Fit 2008 and I have enjoyed watching your videos on the how to’s !! Ty
thank you for going to this effort, brilliantly explained all the way through....you have given me the confidence to have a go myself....thank you again
Thanks for this video. This helped me change the ugly hazed yellow headlights and put on my clear headlight assembly on each side. The car looks WAY better now. I just changed them yesterday!
strictlyformyninja, awesome, great job!
Thanks for making the video. Definitely won't be breaking my clips thanks to your video.
Yah, just give them a good yank to start with. Don't pry up on them too much or they will definitely crack.
Hi! I from Brazil, you helped much, thank you.
Very nicely done Sir! Very helpful!!
Many thanks for this video and the links for all the parts. I've been searching all over online, stumbled upon this video, and it saved the day. Thank you so much for sharing your knowledge!
Glad this was helpful! What are you needing to do? Headlights or more?
@@DansWay it is a bumper, hood, driver light and the bracket underneath the light. Your link for bracket underneath the light was our missing link. Thank you!
GREAT VIDEO THANKS
DAN HOLT
Super helpful. I have an 07 Fit and want to replace the headlights. Definitely feel like I can DIY after watching this. Thanks!
Good job.very clear
Thanks came very useful
Great video thank you for sharing it helped me out
Hey thanks for the comment Kevin. Glad to help you out!
Great video with all the steps (just missed the beer) I got a kick when I saw the California license plate... (the state where If you paid someone to do that job it would cost ya an arm and a leg!!!) ;)
Very helpful and clearly explained, but ends very abruptly. Is there a part 2 covering left hand headlamp and replacing the bumper?
Thank you Sir...
I wet sand and buff them lights to a exTREEmly nice condition... either way, there is nothing like some new lexan.. 3M makes a 'film' to 'wrap' the lights with also ... you know it , all the good stuff is pricey :D Be Blessed Dan
otimo video, muito grato.
Love the way you quickly highlighted the wife owns the car!!! He he
broke those clips beneath the headlights as-well trying to take off bumper first time lol. now bumper kinda hangs loose so ill have to replace
Very good !
Thank you!!!!! This helped so much
You are very welcome!
Great video !! Thanks !!!
Thanks, glad it was helpful!
Holy smokes those things look huge.
Yah right!
Would the clips be in the same spots or similar for 2010 Honda Fit?
aw.... come on, man. why you gotta do us like that? where's the finished shots. lol
Good morning, I have the same fit and I wanted to know where the horn is.
Thanks a lot
There are generally two horns. They are in front and behind the radiator as I recall. Round black plastic with two wires going to each.
My headlights were foggy as hell but that Meguiars headlight restoration kit made them look brand new. Literally just like the one he's holding. $25 for the kit and even if they start to fog up again(a treatment chemical is included in the kit though) replacement oem headlights are like $200.
Thanks for the comments!
I know so funny
The video is great and very detailed the only thing I find it's missing is putting the bumper back on. Does is just clip on and you replace the clips on the bottom?
Basically yes. The sides snap back on, and the top and bottom need to have the clips reinstalled or replaced. There is a snap-kit assortment available on Amazon that there is a link to in the description above.
@@DansWay thank you so much for the info, it's very helpful
Fits are so fast on the highway (VTEC no joke in this thing)
This is also how I change the lightbulb. Hah, thanks Honda engineers.
Yup...
Show the removal of headlights on the second model Honda fit
Great video. Looks easy enough for even me. Did the new assembly have all the fittings to connect to the frame? Mine broke, so I just want to know if I need to order them as well.
The new assembly has the same three molded-in holes that attach to the car frame. Let me know how it turns out!
Michael Rokofsky -
The assembly has the mounting holes that align with the existing holes in the frame. Take a look at the first couple minutes of video again and you can see how I point them out. No bolts are provided, just the one piece light. All the bulbs were provided as well which I honestly didn't even think about.
You don't even need to remove the entire bumper. Just loosen the two screws in the wheel housings and the 4 top clips and bend it a little bit down. Then you can reach all 3 bolts and 1 screw of each headlight.
Exactly right. I think I mentioned in the video that I removed it completely to inspect the area more completely because this was a salvage purchase.
@@DansWay ah, my bad. i didnt watch it with sound. keep going! your videos are really helpful!
How can get EGR of honda fit?
Great job except where's part 2!?
Unfortunately there isn't one. I didn't capture the last bit of re-assembly to 'properly' finish out the video...
At first, I thought it was Bob Thornton was vlogging.
👍👍👍👍👍👍👍
Don't know about the age of this vehicle, but in the UK if this was manufactured 2007..the vehicles were having their exhausts stolen due to the valuable metals. I think newer models have made it more difficult for the exhausts to be stolen. It happens in minutes. If the exhaust hasn't been stolen already make sure your vehicle is alarmed. Honda civic is another. Does theft of exhausts take place in the US? It will cost several hundred $ to purchase an after market exhaust I'm guessing.
วิธีตั้งค่าTPS HONDA JAZZ ENGINL15A1
Sir, I liked your video but Sir, I do not know from you that it is necessary to change the bamboo to change the light. Pliz replied must....
Arbaaj, the lowest two bolts on the headlight is hiding behind the bumper which is why it must be removed to completely replace the headlight. These two bolts also connect to the bumper support clip which holds on the bumper right below the headlight.
Sir.. So you mean we should open the bumpers' headlight
Right..sir
Hello!You can do it in another way
Would love to hear your suggestions!
Hi were there bulbs delivered with the new units? Thx.
Yes, all of them were included.
Dan Holt Thx very much😀
@@DansWay I was told I needed to replace my driver side bracket for my Honda fit because I got in a wreck and I have the new headlights not but I'm not sure what the bracket it or what it looks like for me to be able to order it...and help would be awesome
Andrew, take a look at the following links. There are two different bumper retainer assemblies. One attaches to the headlight, the other to the fender near the tire. I don't know what year you have, so double-check that these are the same as your car's year:
www.hondapartsnow.com/genuine/honda~spacer~71198-sln-a01.html?Make=Honda&Model=Fit&Year=2008&Submodel=&Filter=(bt=3%2c21;et=2%2c7)&Location=bumper,3069442,20
www.hondapartsnow.com/genuine/honda~beam~71146-sln-a00.html?Make=Honda&Model=Fit&Year=2008&Submodel=&Filter=(bt=3%2c21;et=2%2c7)&Location=bumper,3069442,17
did you use #10 for all bolts?
I assume you are talking about the bolts on the lights? Honestly I don't remember, but they were all the same.
I had the front end apart last weekend, this time to do the valve clearance adjustment and to replace the bumper clips I broke while filming this video... ;-) So yes, all the bolts on the headlights were 10mm.
What year was this vehicle?
This is a 2008 Honda Fit
I can do all of that in half the time, just go through the wheel wells
How would you get to the two hidden screws by going through the wheel wells?
@@DansWay Which hidden screws? Just take out some of the push pins and you're set.
I just have a ton of experience changing bulbs in most Hondas from working at a Honda dealership. I would do a video, but it's all done by feel.
In three years, those have gone from $103 to $190 a piece. Woah. I may have to keep polishing every so often. Good video, though.
Wow, yah, that is high! The passenger side is $150 so that's a bit better, but I'm not sure what is going on. Did you find any other lower cost options? I'll do some searching myself for a different solution...
@@DansWay Heh, it's a twelve year old car, and I've been polishing them about every two years for about half that. At this point, I'm not going to spend too much money on them. I came to the video because I was told I need to remove the bumper to get a clearer shot at the front engine mount which seems to have failed.
Чистота даже под бампером
All you had to do is sand down the corrosion off the OEM headlights and apply a clear UV coat. Would of been just fine.
Looks good though all cleaned up!
Thanks, these new lights are a bit different of a look from the factory original. We tried to polish the surface of the old ones, but the plastic was yellowed all the way through on ours so we just decided to go for new ones. The sanding trick has worked on my other cars.
It's not corrosion, the plastic is solarized so that it appears to have cracks all the way through. Polishing the surface won't help.
Honda fit 2
Man, you should wear safety goggles.
Is this car rebuilt ?
Yes, it has a salvage title.
Dan Holt , have you felt aomething strange when you drive this rebuilt car ?
Nope. Drives like any other Fit as far as I can tell...
You had me until you said they dumbest thing I ever Hurd turn the lights on and Mark it on the door look people put the the screws in 99.9 percent back where it was lmfao at this dude
What hassle, wow!
Очень долго, много не нужной информации...
The worst engineered car ever made by crappy japanese manufacture.