Thank you, thank you, THANK YOU for this video and the two that follow. I have been sewing every day for six weeks with my Viking 230, and it has not been serviced professionally in more than 10 years. It was misbehaving all the time and slowing me down. I was able to follow your videos exactly and take apart my machine to clean and oil it. I was able to reassemble it and there were no parts left over ;-) It sounds completely different now and runs so smoothly. Thank you again.
Присоединяюсь! Разборка, смазка и сборка - это очень хорошо. Но хотелось бы знать где можно подстроить высоту подъёма транспортировочных зубьев и положение иглы по центру...
@@ОлегКудрявцев-к5ш высоту зубчатой рейки можно изменить регулятором давления лапки слева, если повернуть его на самое начало ниже единицы. Тогда можно делать штопку, вышивку в свободно- ходовой технике. Ну я думаю, Вы уже и сами догадались. Я поздно нашла это видео в поисках инструкции к этой машинке. Мне нужна на русском или немецком языке. По-английски не понимаю.
At 0:50 I have an old 320 Electronic. There (when you picked out the black metal) it has a screw that will not come out. So there was as long as I could go 😂
I have three machines from this Viking line. Two of them have a problem where the thread bunches at the bottom of what I am sewing. The problem somewhat improves when I turn the thread tension up all of the way, but it's still not quite right. I tried swapping the thread tension units with the machine that does work, but it didn't help. The machines are clean and lubed. Do you have any idea what could be wrong? I should note that on two of these machines, I found a very small spring in each (1" long, 1/8" wide). In one machine that I took apart, the spring had fallen off from somewhere and fell into the base. On another machine, it was mangled and lodged behind the stitch length dial. However, on the one with the spring sitting in the base, it sews fine. I cannot find a small spring like this on the third machine. Sorry for all of the questions, but I haven't been able to find any information on these machines other than in your videos; I feel like you are my only hope!
Did you solve the problem? Mine does something similar. It is sewing fine for 30 seconds straight but then in tangels up. I suspect the "stretching hook" (don't know its real name) doesn't move upwards at the right moment so there is a lot of thread slack once the needle start to move upwards. Possibly mechanically out-of-sync?
Solved, it just needed hook timing adjustment (i.e. move the needle rod downwards one millimeter) and 0.5mm shortening of the zig-zag pullrod. Now it works perfectly for the first time ever 😁
Have you looked to see if the gear on the rotating hook is correct ,? If it is partially or completely damaged, replacement is the only solution. It's a complex job and don't try to do it, I don't have the conditions to make a new video clip for now, my recording equipment is very modest. Nonsense goes best on RUclips and few people watch serious videos, if I earned enough I might buy good equipment, for now I'm far from it. Greetings.
Mam za mało informacji, ? Od kiedy masz ten problem na maszynie do szycia, czy zmieniłeś igłę w maszynie, czy ktoś coś robił lub naprawiał na maszynie do szycia, opisz swój problem bardziej szczegółowo.?
Hi Thanks for the video. Question about bobbin. You point at something what du you mean by that? The thing is that I have a problem with bobbin it sits to tight after I assembled everything and when I try to pick up the thread, the thread get stuck.
Scollegare dalla tensione la macchina per cucire, premere la lampadina verso l'alto e ruotarla verso sinistra, rimuovere la lampadina e installarne una nuova.
Husqvarna Viking Scandinavia 300.? It is a sewing and embroidery machine, incomparable with the model from the video clip, I have no special opinion, a solid home sewing machine. I don't know if more are produced and if a new one can be bought. Used specimens, purchase only with detailed inspection.
@Carol Frazer If you do not understand what I'm doing on this video, you it is impossible for you to explain. Sewing machine Husqvarna 230 : www.masinskikutak.com/2015/09/husqvarna-230-electronik.html
Please i do like you for clean my machine ( this one exactly ) but when i want to cover it i find a difficult to return one piece if you Can give me you Instagram or Facebook to sent to you tbe picture to help me if you Can please
If you return to your video in 11:26 to 11:29 the item i don't know how to return because it was other item that work with in ghe white cover you understand me ?
Thank you, thank you, THANK YOU for this video and the two that follow. I have been sewing every day for six weeks with my Viking 230, and it has not been serviced professionally in more than 10 years. It was misbehaving all the time and slowing me down. I was able to follow your videos exactly and take apart my machine to clean and oil it. I was able to reassemble it and there were no parts left over ;-) It sounds completely different now and runs so smoothly. Thank you again.
That's great, thank you for sharing our videos.
Great video series. I have a 210 which I will service following you videos. Thank you!
This is a video showing basic sewing machine maintenance and more, check it out: ruclips.net/video/sek0-DziI-0/видео.html
Thank you! 🙏🏻 @@MasinskiKutak
Без слов, но вся последовательность разборки, смазки и далее сборки абсолютно понятна. Респект за видео.
Cпасибо :)
Присоединяюсь! Разборка, смазка и сборка - это очень хорошо. Но хотелось бы знать где можно подстроить высоту подъёма транспортировочных зубьев и положение иглы по центру...
@@ОлегКудрявцев-к5ш высоту зубчатой рейки можно изменить регулятором давления лапки слева, если повернуть его на самое начало ниже единицы. Тогда можно делать штопку, вышивку в свободно- ходовой технике.
Ну я думаю, Вы уже и сами догадались.
Я поздно нашла это видео в поисках инструкции к этой машинке. Мне нужна на русском или немецком языке. По-английски не понимаю.
At 0:50 I have an old 320 Electronic. There (when you picked out the black metal) it has a screw that will not come out. So there was as long as I could go 😂
ruclips.net/video/sek0-DziI-0/видео.html
Не понятно как потом на место водрузить ленту, которая показывает положение переключателя швов
Подивіться це відео, десь посередині відео є відповідь на ваше запитання...Слава Україні 🇺🇦 ❤️ 🇧🇦
ruclips.net/video/xK_QqOf_x-8/видео.html
@@MasinskiKutak спасибо
Muchísimas gracias!
la segunda parte 🙂
ruclips.net/video/q4KoiPDm5vs/видео.html
Hello.its a very nice video.can you show the inside of the power supply board.and also how to remove the power supply unit from the machine
I think it's very simple, if you are not sure of your knowledge,
do not touch the board that is under voltage.!!
New video, maybe, I can't promise.
Спасибо...доходчиво и толково !!
I have three machines from this Viking line. Two of them have a problem where the thread bunches at the bottom of what I am sewing. The problem somewhat improves when I turn the thread tension up all of the way, but it's still not quite right. I tried swapping the thread tension units with the machine that does work, but it didn't help. The machines are clean and lubed.
Do you have any idea what could be wrong?
I should note that on two of these machines, I found a very small spring in each (1" long, 1/8" wide). In one machine that I took apart, the spring had fallen off from somewhere and fell into the base. On another machine, it was mangled and lodged behind the stitch length dial. However, on the one with the spring sitting in the base, it sews fine.
I cannot find a small spring like this on the third machine.
Sorry for all of the questions, but I haven't been able to find any information on these machines other than in your videos; I feel like you are my only hope!
The tension of the upper and lower threads is essential for proper sewing of the machine,
check the tension condition and the lower thread.
Did you solve the problem? Mine does something similar. It is sewing fine for 30 seconds straight but then in tangels up. I suspect the "stretching hook" (don't know its real name) doesn't move upwards at the right moment so there is a lot of thread slack once the needle start to move upwards. Possibly mechanically out-of-sync?
Solved, it just needed hook timing adjustment (i.e. move the needle rod downwards one millimeter) and 0.5mm shortening of the zig-zag pullrod. Now it works perfectly for the first time ever 😁
Perfect!
Thank you 🙂
HUSQVARNA Viking 225 / 230 / 235 / 320 ...Oiling
ruclips.net/video/q4KoiPDm5vs/видео.html
Hello, Do you have the parts list for a Husqvarna Viking Designer SE? Specifically the sensor system.
I think you have already asked a similar question on this link:
ruclips.net/video/77l9yWuH5E0/видео.html
www.pinterest.com/pin/375206212721234221/
still cant see how to change the stitches. Light is very bad on the video. Can you please explain in English?
I will make a higher quality video when I buy better equipment, a quality camera and lighting, it is too expensive for me for now. 😐
Download a manual online for free.
With my sewing machine the rotary grab is apparently defective, can you please show how I can change it ?
Have you looked to see if the gear on the rotating hook is correct ,?
If it is partially or completely damaged, replacement is the only solution.
It's a complex job and don't try to do it, I don't have the conditions to make a new video clip for now, my recording equipment is very modest. Nonsense goes best on RUclips and few people watch serious videos, if I earned enough I might buy good equipment, for now I'm far from it. Greetings.
Zigzag stitch?
Watch this video: ruclips.net/video/sek0-DziI-0/видео.html
Do you have the manual for this machine?
What exactly is your sewing machine model?
Witam od góry szew jest niepełny jakby nie do końca złapała nitka dlaczego?
Mam za mało informacji, ? Od kiedy masz ten problem na maszynie do szycia, czy zmieniłeś igłę w maszynie, czy ktoś coś robił lub naprawiał na maszynie do szycia, opisz swój problem bardziej szczegółowo.?
Hi
Thanks for the video.
Question about bobbin. You point at something what du you mean by that?
The thing is that I have a problem with bobbin it sits to tight after I assembled everything and when I try to pick up the thread, the thread get stuck.
Specify the time on the video clip that is interesting to you ...?
@@MasinskiKutak
13:08
and again thank you for a great video
@@jasermahdi2276
It is a screw to adjust the tension of the lower thread. The tension of the lower thread should be very small.
How about some narration to your videos?
Not possible 😀
Buon giorno , ho difficolta' cambiare la lampadina per far luce cortesemente ,e possibile avere un libretto istruzioni in italiano file PDF
Ciao
Non ho istruzioni in italiano, non mi è chiaro come si possa avere un problema con la sostituzione della lampadina, è molto semplice. ??
Scollegare dalla tensione la macchina per cucire, premere la lampadina verso l'alto e ruotarla verso sinistra, rimuovere la lampadina e installarne una nuova.
How about model 300?
Husqvarna Viking Scandinavia 300.?
It is a sewing and embroidery machine, incomparable with the model from the video clip, I have no special opinion, a solid home sewing machine. I don't know if more are produced and if a new one can be bought. Used specimens, purchase only with detailed inspection.
Take the music off the video and please explain what you are doing.
@Carol Frazer
If you do not understand what I'm doing on this video, you it is impossible for you to explain.
Sewing machine Husqvarna 230 : www.masinskikutak.com/2015/09/husqvarna-230-electronik.html
Please i do like you for clean my machine ( this one exactly ) but when i want to cover it i find a difficult to return one piece if you Can give me you Instagram or Facebook to sent to you tbe picture to help me if you Can please
If you return to your video in 11:26 to 11:29 the item i don't know how to return because it was other item that work with in ghe white cover you understand me ?
Watch this video (4.16):
ruclips.net/video/xK_QqOf_x-8/видео.html