👇 If This video resolved your problem? Consider buying me a coffee to keep Hifi Audios going. Your support means a lot! www.buymeacoffee.com/hifiaudios
Thank you!! It worked finally after watching so many videos. I didn't have the soundbar close enough to the subwoofer. Thank you for saying to move it closer! Game changer. 🎉
My HW-F450 ZC does everything in your video but after I turn soundbar on woofer keeps flashing blue, tried unplugging woofer, pushed button in, flashing blue , mute button, id set displays, turn on sound bar, still flashing!!!! I'm almost ready to chuck it in the trash 😢
for the remote, you might wanna check Samsung's official site first. If not there, Amazon or eBay could be your next best bet. Sometimes local electronic stores surprise you too.
Hi bro my Samsung soundbar Q990C is not working just 1 orange Light is on. I m going to samsung service centers butt he is noy resolving this problem i m just 2 months ago buy the Samsung Q990C soundbar. Pls help me Thanks
Hey! Ugh, that's super annoying, especially since it's so new. Sounds like you've had a bit of a runaround with the service center too. Have you tried reaching out to Samsung directly? Sometimes getting in touch through their customer support can make a big difference. Also, since it's only been 2 months, your warranty should definitely help you out here. Don't give up, and keep pushing for a fix or replacement.
Usually, that means it’s trying to connect but something’s not quite right. Try turning off both the soundbar and subwoofer, then turn them back on to reset the connection. If that doesn't work, you might need to re-pair them manually.
How do I disconnect the sub connection everything I do the light just goes back to solid blue and still doesn’t work. Also this has been working fine for over a year and then it just stopped.
Samsung couldn't help me. Sub will not connect. I have the 950k 5.1.4ch dolby atmos soundbar. If anyone has any solution on how to get them repaired I'd appreciate the help.
Have you tried all the steps in the video? Sometimes, a factory reset can help. If it's still not working, maybe a local electronics repair shop could take a look.
Ay, qué lata con eso! Si la luz azul sigue parpadeando y no conecta, tal vez intenta resetear ambos, el subwoofer y la soundbar. Si eso no funciona, podría ser un problema más técnico. Quizás llamar al soporte de Samsung sería la próxima mejor opción. ¡Espero que se solucione pronto!
Hey, I think u can still connect it without the remote. Try pressing the connect button on the subwoofer and soundbar, they should pair automatically. If not, check the manual for alternative methods. Hope this helps
If you're trying to connect your subwoofer to the soundbar without the remote, it can be a bit tricky, but sometimes there's a manual pairing button on the back or bottom of the subwoofer and soundbar. Check for those and press them to see if that works. If not, you might need to get a replacement remote or use a universal one.
Ah, that's a hassle without the remote! You might still be able to pair it manually. Check if there's a pairing button on the subwoofer or the soundbar itself. Pressing that could do the trick.
Yep, it should be wireless! Try unplugging both the soundbar and subwoofer for a few minutes, then plug them back in and pair them again. Sometimes they just need a quick reset to get connected properly.
Totally get your frustration, connecting these can be real tricky sometimes. Have you tried reseting the soundbar and woofer? Sometimes turning them off and on again helps. If not, maybe check out a guide or video for tips. Hope it works out for ya!
Try this: unplug both the soundbar and subwoofer from power for a few minutes. Then plug them back in and press the "ID Set" button on the back of the subwoofer. Hold it until the blue light stays solid. If the light turns solid blue, it means they're connected. If not, repeat the process.
👇 If This video resolved your problem? Consider buying me a coffee to keep Hifi Audios going. Your support means a lot!
www.buymeacoffee.com/hifiaudios
I should have come here first and reduced the stress in my life 😭 This worked out great 👍🏻
Worked like a charm...😊 Thank you....
You're welcome!
This YT video solved my subwoofer linking with my soundbar….thank you!
Thanks a ton! Helped me save some money!
Thanks for your help. I was getting frustrated by it. 😅
Method 1 works for me (thx 👍🏼).
Glad it helped
@@hifiaudios8101 👍🏼
Thank you!! It worked finally after watching so many videos. I didn't have the soundbar close enough to the subwoofer. Thank you for saying to move it closer! Game changer. 🎉
Glad it helped!
How much closer does it need to be these pieces of crap have a cup between them. Piece of Samsung
Thank u very much i paired the sub woofer using idset method
Finally got it. Been using it without the sub for more than a year =(
Wow, a whole year without the sub? Bet it sounds way better now! Glad you got it sorted out.
Do you need to set up surround to use subwoofer?
My HW-F450 ZC does everything in your video but after I turn soundbar on woofer keeps flashing blue, tried unplugging woofer, pushed button in, flashing blue , mute button, id set displays, turn on sound bar, still flashing!!!! I'm almost ready to chuck it in the trash 😢
Same 🥲
It works …THANK YOU ❤
It's working thankyou bro
Enjoy
you totally ROCK. All the forums and even manual say volume up. nope. mute. you'e a hero!
Aww, thanks a bunch! 😄 I'm just glad it helped out! Yeah, sometimes those manuals don't get it right, huh?
My Samsung SM HW6500 soundbar wont show ID SET when switched off. Held the mute button for 30 seconds. Nothing.
Where to buy the remote control???
for the remote, you might wanna check Samsung's official site first. If not there, Amazon or eBay could be your next best bet. Sometimes local electronic stores surprise you too.
Hi bro my Samsung soundbar Q990C is not working just 1 orange Light is on. I m going to samsung service centers butt he is noy resolving this problem i m just 2 months ago buy the Samsung Q990C soundbar. Pls help me Thanks
Hey! Ugh, that's super annoying, especially since it's so new. Sounds like you've had a bit of a runaround with the service center too. Have you tried reaching out to Samsung directly? Sometimes getting in touch through their customer support can make a big difference. Also, since it's only been 2 months, your warranty should definitely help you out here. Don't give up, and keep pushing for a fix or replacement.
I don’t have a remote
What is the solution
The subwoofer on mine is connected but it puts out zero bass. I've turned mine up to 6 and nothing.
Same, nothing worked. So only optiom is to return it
Both blue and red light are blinking?
Usually, that means it’s trying to connect but something’s not quite right. Try turning off both the soundbar and subwoofer, then turn them back on to reset the connection. If that doesn't work, you might need to re-pair them manually.
How do I disconnect the sub connection everything I do the light just goes back to solid blue and still doesn’t work.
Also this has been working fine for over a year and then it just stopped.
Maybe try unplugging it for a bit, like a good few minutes, then plug it back in and try pairing again? Sometimes they just need a little reset.
Mine does the same thing the blues light keep blinking
My. Samsung sound baar not cannect Ed..... BLU light.always.coming
I’m getting all the sound only from the subwoofer box. Nothing from the soundbar
Thanks that mute button work
You're welcome
Samsung couldn't help me. Sub will not connect. I have the 950k 5.1.4ch dolby atmos soundbar. If anyone has any solution on how to get them repaired I'd appreciate the help.
Have you tried all the steps in the video? Sometimes, a factory reset can help. If it's still not working, maybe a local electronics repair shop could take a look.
pairing is more difficult than pulling teeth
💕 TQ 💕❤annaya 💕
el subwoofer parpadea la luz azul y no me empareja nada hice todo lo del video y nada :/
Ay, qué lata con eso! Si la luz azul sigue parpadeando y no conecta, tal vez intenta resetear ambos, el subwoofer y la soundbar. Si eso no funciona, podría ser un problema más técnico. Quizás llamar al soporte de Samsung sería la próxima mejor opción. ¡Espero que se solucione pronto!
Is their any way to connect it without the remote( I lost it)
Hey, I think u can still connect it without the remote. Try pressing the connect button on the subwoofer and soundbar, they should pair automatically. If not, check the manual for alternative methods. Hope this helps
I also lost the controller
Dude I’m in the same train
I just bought a remote on Amazon under $10
@@NykoCentral did it work?
Try to connect to your TV Bluetooth
Without remote hiw
If you're trying to connect your subwoofer to the soundbar without the remote, it can be a bit tricky, but sometimes there's a manual pairing button on the back or bottom of the subwoofer and soundbar. Check for those and press them to see if that works. If not, you might need to get a replacement remote or use a universal one.
Price
I don’t have the damn remote
Ah, that's a hassle without the remote! You might still be able to pair it manually. Check if there's a pairing button on the subwoofer or the soundbar itself. Pressing that could do the trick.
Same i dont have a remote, is there any way to put the soundbar into pairing mode with the buttons on the bar?
I was told the subwoofer was wireless 🤷🏾♂️
Yep, it should be wireless! Try unplugging both the soundbar and subwoofer for a few minutes, then plug them back in and pair them again. Sometimes they just need a quick reset to get connected properly.
My woofer this is trash I am tired try to connect the woofer this Samsung is trash
Totally get your frustration, connecting these can be real tricky sometimes. Have you tried reseting the soundbar and woofer? Sometimes turning them off and on again helps. If not, maybe check out a guide or video for tips. Hope it works out for ya!
Hey I want to catch this train that u got on
My Samsung soundbar won't conncet to the subwoofer after id rest blue and red still blink. please what can i do?
Try this: unplug both the soundbar and subwoofer from power for a few minutes. Then plug them back in and press the "ID Set" button on the back of the subwoofer. Hold it until the blue light stays solid. If the light turns solid blue, it means they're connected. If not, repeat the process.