Your a hell of a guy and you've got mad home brewn skill. I'm also thankful that you keep your content clean, I can kick back and watch your stuff without worrying about rhe kids hearing trash. Kudos to you my friend 👏
The water could be coming from the side glass upper area of molding.. usually stretches leaving a gap. water goes in side C pillars and through the rear hatch shocks bolt.
I didn’t even know what flocking was until I watched your video today. You did a pretty good job considering it was your first time doing it. 👍 **That blue color is pretty sick**
I would highly suggest spraying the adhesive. You could cover the hole dash in probably a minute or two so you have more time to flock. Or one person lay adhesive and another following with the flock.
@@stevenball7375 yawp flocked my dash and I cant imagine the adhesive being reduced especially since the instructions specifically say to roll it/brush it on
Now that its been a week or so, would you say the flock powder can still rub/scuff off? By slight touch or would you really have to hit it/scrape it hard to mess it up?
I flocked my ash tray red and bought personal box stickers and made a jdm replica of a personal box. For Best results paint first the part the same color as the flock. I used tape and can spray glue for results.
iirc you need the pedal assembly from a manual ef/crx maybe da but idk. Take a look at the exploded parts diagrams for both on a hondaparts site, and maybe some underdash photos, and it will become more clear. If you plan on using a hydro trans, you might consider an aftermarket pedal to avoid the cable/hydro adapter. Just pay attention to mounting an lengths of you go that route. You will love the manual.
Unrelated to the video but I was looking at lifting my 50$ 94 civic... any ideas you may have? I was lookin at 3” strut spacers and possibly pucks under the body. And before anyone says your ruining a civic it is rusty ash and not titled🤷🏽♂️ lmk if you got any ideas
Unfortunately, the CRX and EF are notorious for rear water retention from leaking. If you have a sunroof check the water return tubes. They often separate leaking water into the car. If that's not the problem it's most always the tail light gaskets. PS. I wouldn't flock a bicycle let alone a dash. It's not all what it's suppose to be. Just my opinion, however I must say your flocking job looks oretty dam good👍 My current dash I am covering with high end Suede material using 3M contact adhesive. A bitch to do? Yes! Worth it when done? Absolutely!🙂
Flocking is cool for the 1st year then ehh. Don't flock anything you touch often. Rally racers do it to the dash to eliminate glare. Better off gluing stretch fabric for anything that will see any wear at all.
At first I didn't like the color. But, it grew on me by the end. I think it will look dope once it's done. It will be different too, I'm sure most would have gone for a red type r kind of look. Nice job Dana. 👍
nice man. the part where you were reinstalling the dash, it really seemed like it matched the interior really nicely. especially the carpet. definitely digging the blue.
Dana, I've had a pair of CRX aftermarket seat brackets for years, but I always end up w/ hatchbacks & can't use them. I'd love to DONATE them to you, but I cannot pay to ship them out. If you want them or want pics message me anytime here (I don't do any social media) w/ how to contact you.
Seems like alot of organized chaos lol that's how I roll anybody can come in my garage n think Jesus how does he find anything yet I know where everything is!!
You could’ve did it in sections I’m just saying I’m not a professional but I’ve done it do the hard parts cracks and crevices hard to reach places then do the big sections last
![Twenty One Pilots - “The Line” (from Arcane Season 2) [Official Music Video]](http://i.ytimg.com/vi/E2Rj2gQAyPA/mqdefault.jpg)
Glad the package showed up and will be used. Thanks for the shout out!
That blue looks nice to do a blue interior
Your a hell of a guy and you've got mad home brewn skill. I'm also thankful that you keep your content clean, I can kick back and watch your stuff without worrying about rhe kids hearing trash. Kudos to you my friend 👏
I felt it helped out my flock experience to do it at night when it was cold. The adhesive didn’t dry as fast. Keep it up Dana much love!
I've been waiting for this video! Dropped it on a Friday!
Dashboard looks good 👍 1 question if you rub your hand on it dose the flock come off or is it glued pretty good 👍
That's what I'm asking. I think it would be easier to cover the dashboard with fabric
It comes off and leaves prints
One of the best honda channels that real underrated. Been watching for a long time now.
Maybe it could be done in sections to help out with timing
I don’t know how I’m getting water in mine it has cutout doors maybe that it doesn’t always leak only big storms
The water could be coming from the side glass upper area of molding.. usually stretches leaving a gap. water goes in side C pillars and through the rear hatch shocks bolt.
I didn’t even know what flocking was until I watched your video today. You did a pretty good job considering it was your first time doing it. 👍
**That blue color is pretty sick**
I would highly suggest spraying the adhesive. You could cover the hole dash in probably a minute or two so you have more time to flock. Or one person lay adhesive and another following with the flock.
I think if you used a spray gun to apply the adhesive you could probably do it by yourself again with more time to apply the flock. Keep Gunnin!
The adhesive is thick like house paint and it can't be reduced. Idk if it can be sprayed with a gun.
@@stevenball7375 yawp flocked my dash and I cant imagine the adhesive being reduced especially since the instructions specifically say to roll it/brush it on
You won’t get an even coat. You need to roll it on. It’s been done that way for years
Dash that's cracked...cardboard backing, bodyfiller to reshape...flock
Now that its been a week or so, would you say the flock powder can still rub/scuff off? By slight touch or would you really have to hit it/scrape it hard to mess it up?
I flocked my ash tray red and bought personal box stickers and made a jdm replica of a personal box. For Best results paint first the part the same color as the flock. I used tape and can spray glue for results.
You killed it with the flocking much respect ✊
Homies
"The Flock-It Mini-Pumper" That is flockin hilarious!!
The flock has a nice look that say just dying the dash and plastics. Glad I watched the whole video.
Interior color looks good already
Man, seeing the teggy in the background makes me wish he was into 5th gens.
Any advice on a clutch pedal assembly for my EF I can’t seem to find a interchangeable part I’m swapping from auto to stick. Thx keep up the videos.
iirc you need the pedal assembly from a manual ef/crx maybe da but idk. Take a look at the exploded parts diagrams for both on a hondaparts site, and maybe some underdash photos, and it will become more clear. If you plan on using a hydro trans, you might consider an aftermarket pedal to avoid the cable/hydro adapter. Just pay attention to mounting an lengths of you go that route. You will love the manual.
Unrelated to the video but I was looking at lifting my 50$ 94 civic... any ideas you may have? I was lookin at 3” strut spacers and possibly pucks under the body. And before anyone says your ruining a civic it is rusty ash and not titled🤷🏽♂️ lmk if you got any ideas
Chasing water leaks of my own. Can anyone recommend new seal/foam tape to make new taillight seals? I'm 0-2 on my Amazon tape trials.
Unfortunately, the CRX and EF are notorious for rear water retention from leaking. If you have a sunroof check the water return tubes. They often separate leaking water into the car. If that's not the problem it's most always the tail light gaskets. PS. I wouldn't flock a bicycle let alone a dash. It's not all what it's suppose to be. Just my opinion, however I must say your flocking job looks oretty dam good👍 My current dash I am covering with high end Suede material using 3M contact adhesive. A bitch to do? Yes! Worth it when done? Absolutely!🙂
Flocking is cool for the 1st year then ehh.
Don't flock anything you touch often.
Rally racers do it to the dash to eliminate glare.
Better off gluing stretch fabric for anything that will see any wear at all.
At first I didn't like the color. But, it grew on me by the end. I think it will look dope once it's done. It will be different too, I'm sure most would have gone for a red type r kind of look.
Nice job Dana. 👍
nice man. the part where you were reinstalling the dash, it really seemed like it matched the interior really nicely. especially the carpet. definitely digging the blue.
I'm gonna have to look into that. My 88 civic hatchback interior has seen better days, time to flock it
Shit looks good to be I want navy blue interior now 😩
looks good for your first rime!
give a way car looking nice
Looks dope Dana! You should do black next time for sure 🤌🏽🙏🏽❤️
Prince would have loved that dash lmao!
That turned out really nice!
flock all the panels and you wont have a matching issue :)
What tha Flock.... came out pretty good Dana!
Is the finished product a bit glittery under the sun?
so how do u clean flocked dash?
I don’t even like Honda cars, but I always enjoy watching your videos bro 😎
It looks good for your first time doing it
How’s it holding up ? Does it rub off or anything if you touch it ?
It does flake off still. But I laid it pretty thick on the dash. The center console noooo bueno!
Great video bro...You know how to push through anything...and make it work...Looking good bro...
Flock flockity flock flock 🔥🔥
He really does give a flock
Blood in Blood out, essay!!! We did what we had to for "Honda" hahahahah....
Right on!!!
Bro if you were in Canada right now in Mali province that - would be fixed and finished easy
Buy another cheap harbor freight spray gun for the adhesive much faster then brushing and rolling
Happy New Year’s Eve 🇰🇭
yes sir looks pretty good!
Iam not a big fan of flock but it came out aight keep killing it buddy
Nice job! Maybe do half at a time? No?
Your flocking awesome bro keep up the great work
Flock that clock block!
like your videos bro. i watch you every day even if i saw them already
Dana, I've had a pair of CRX aftermarket seat brackets for years, but I always end up w/ hatchbacks & can't use them. I'd love to DONATE them to you, but I cannot pay to ship them out. If you want them or want pics message me anytime here (I don't do any social media) w/ how to contact you.
The shake weight for Tuners....hahahaha
Did you find the cause of the leak?
Instead of LaPonda V2, how about LaLake? ^__^
That flocking motion. Lol
your flocking work came out pretty clean bro keep up the good work Dana nd happy 🇰🇭 new years all ♥️ from LongBeachCity
Nice work men
Seems like alot of organized chaos lol that's how I roll anybody can come in my garage n think Jesus how does he find anything yet I know where everything is!!
Hey Dana is your brothers integra auto or stick?
Thats his niece integra bro nd its an automatic
Meet The Flockers
Looks good 👍👍
I fucked up on mine did the navy blue on my da integra and used the wrong color glue 😂😂
Lol, looks like one of them low rider car interior. i think i would have opt to paint it with interior paint instead.
Nice👍🏻
That is beautiful, what is that velvet?
Its very velvety, but will knock down fast if you touch it alot.
You could’ve did it in sections I’m just saying I’m not a professional but I’ve done it do the hard parts cracks and crevices hard to reach places then do the big sections last
🔥🔥🔥
Whooo I gotta buy that LoL 😆😆 it' looks good 👍😎😎
👍🏻👍🏻👍🏻👍🏻
Flock...lol
Ayyyyyy whats good 💯
What’s the story behind that bent ass baseball bat? 😆
WHAT THA FLOCK IS GOING ON HERE ?¿? YO DANA CAN YOU STEP FLOCKING AROUND ¿?¿
Look nice
yee yee
Lesgo
Let's goooo!!!!!
Look almost like a suede
Can I enter to win the give away crx ?
What a FUCKING FLOCKING mess haha let it out YS I would of paint it instead keep the flocking videos coming 👍
Dude that sucks
🔥🔥🔥