Shoutout to S1 Built !!! Great people and outstanding product’s !!! I’m definitely going to buy their AWD kit for my eg after the Kswap is done !!! Peace ✌️ Dana !!! 😜👍🇦🇺
This video was so soothing. The rain seriously was the best part. I feel like working late in the rain would be the most therapeutic thing in the world.
Nice work Dana, I had d distinct privilege to participate and complete my diffmount kit in my crx at S-1 Built shop in Florida. I chose to bang up for clearance. I can't emphasize how much a lift helped. Doing this, any other way is a pain. I drove there JUST TO DO THIS, S-1 Built is one of the best companies AND ALL THE STAFF HAVE BEEN SO NICE 👌! The honda community is indebted to the contributions of S-1!
Im using the S1 bulit alpha 6 drag arms and delta 7 diff. Plate and I cant wait for it to be finished! Its. A project for sure but it will be worth it in the end!
Race Wars? Be careful, I head Hector is gonna be running three Honda Civics with Spoon engines. Great video as always. I have a 89 crx that's been a slow project for years, It's got a built b17 GS-R swap. It runs great, drives ok, the rest of the car is rough and i almost never take it out. I also have a 98 5-speed awd cr-v that I daily. Someday.. someday i'll do the awd swap to the crx.
What a come back Dana!!💪🏼🔥🔥 There’s gotta be something to be said of a person that has gone through everything that you have this past year then turn it all around and pick up the piece’s to finish your goal like this give away car!! I’ve been tripping over stuff in my garage for years and look at it then just turn my head to forget about it again till I trip over it. You are so inspiring Dana🔥💪🏼 thank you for all you do,Bro💪🏼🔥🔥🔥👍🏻🙏🏻❤️
I just finished my K24A4 swap... Hey - I got the entire 04 accord intact, running, manual and free! I swapped the entire frikkin car over including the accord harness. Works fine. Accord Dash too(Have to fab up a dash shroud). If you think putting an A4 in a CRX is a waste of time - you're wrong. The car instantly becomes quite quick with all the torque and 160 HP/TQ isn't shappy - especially for free. Next move S1 Kit w CRV Trans.
"Oh Shit, did i just curse"?? Lol... S1 on point!!. Imma have to check out if they make stuff for the Cb7. I did my Awd using a mix of Crv and Oddessy parts. All stock bits, like the diff mount, support member the strut forks to fab it all up, oh as well as the diff, and trailing arms, rest is aftermarket bits like the LCA's, Camber and toe kits. But that S1 built mount and support member look so damn good.!!.
Dope content as always.keep it up.I was at the show but unfortunately didn't get a chance to meet you in person. Maybe next time...much love/support/respect from your Khmer folks out here in the Bay.
dope content Dana, keep pushing, you at 133K subs, i will be here to say wassup when you hit 500k, just keep doing your thang, much respect from a massive honda car culture in South Africa! Salute!!
Yo has the giveaway entree closed yet? Recently found your channel and I love it man, im a junkyard guy too here in WA. Built my own ek out of it lol, greetings bro and keep up the awesome work🤙🏽
Yo, what part of WA you at friend? I just moved up here from SoCal last year and holding up in western WA. Love it here, love the "collector vehicle" plates too ✌
I know it's an old video, but I just saw it. Hell yeah, this is awesome. My question is about the transmissions in the AWD Honda setups. Do they always send power to the rear, like a Subaru? Or do they only send power to the rear after the fronts start to slip, like a stock CRV? No idea what kind of work goes into the trans on these bad ass AWD Hondas, but I sure do like the idea.
is it just me or is the diff mount plate thats bolted to the LCA mount points bowed out towards the rear of the car? It look like it bowed when you first bolted it in and at 28:45 it looks bowed as well.
Hey man I've always said I loved your clips and just so you no just wanted to give you a 41k lol I heard in ocean side junk yard alot of 87 84 86 honda hatchbacks are there 😉 just a tip bro
Man love your channel..I been watching your channel for long time. Specially the kit on AWD shout to S1 Build...you inspire me to wanna go AWD on 94 EG with 95 GSR swap. How do I sign up for the giveaway CRX?
Any chance you or someone u know has a lead on a set of a6/z6 arp head studs. I'm in desperate need for a set to finish my mini me. Arp is 2 plus months out
Looks likes S1 need to rev up there kits to fit if……If I’m going to pay top dollar it should be bolt on. All that extra welding is not necessary if the is for an “EF” chassis. I’m Not hating cause they make awesome kits.
It can't be an all bolt on. It has to get welded for strength. We seen people using rivet nut style to bolt up and it will rip apart. We seen 1.250" bar bend. It has to be cut if you want your diff to sit in a proper spot. Believe me, we been trying to make it easy and strength at the same time. This was the best option. 👌
Shoutout to S1 Built !!! Great people and outstanding product’s !!! I’m definitely going to buy their AWD kit for my eg after the Kswap is done !!! Peace ✌️ Dana !!! 😜👍🇦🇺
This video was so soothing. The rain seriously was the best part. I feel like working late in the rain would be the most therapeutic thing in the world.
S1 is legit bro glad you could link up with them only way to go in my opinion ALL WHEEL GRIPPING
Nice work Dana, I had d distinct privilege to participate and complete my diffmount kit in my crx at S-1 Built shop in Florida. I chose to bang up for clearance. I can't emphasize how much a lift helped. Doing this, any other way is a pain. I drove there JUST TO DO THIS, S-1 Built is one of the best companies AND ALL THE STAFF HAVE BEEN SO NICE 👌! The honda community is indebted to the contributions of S-1!
Im using the S1 bulit alpha 6 drag arms and delta 7 diff. Plate and I cant wait for it to be finished! Its. A project for sure but it will be worth it in the end!
Race Wars? Be careful, I head Hector is gonna be running three Honda Civics with Spoon engines.
Great video as always. I have a 89 crx that's been a slow project for years, It's got a built b17 GS-R swap. It runs great, drives ok, the rest of the car is rough and i almost never take it out. I also have a 98 5-speed awd cr-v that I daily. Someday.. someday i'll do the awd swap to the crx.
What a come back Dana!!💪🏼🔥🔥
There’s gotta be something to be said of a person that has gone through everything that you have this past year then turn it all around and pick up the piece’s to finish your goal like this give away car!! I’ve been tripping over stuff in my garage for years and look at it then just turn my head to forget about it again till I trip over it.
You are so inspiring Dana🔥💪🏼 thank you for all you do,Bro💪🏼🔥🔥🔥👍🏻🙏🏻❤️
I just finished my K24A4 swap... Hey - I got the entire 04 accord intact, running, manual and free! I swapped the entire frikkin car over including the accord harness. Works fine. Accord Dash too(Have to fab up a dash shroud). If you think putting an A4 in a CRX is a waste of time - you're wrong. The car instantly becomes quite quick with all the torque and 160 HP/TQ isn't shappy - especially for free. Next move S1 Kit w CRV Trans.
"Oh Shit, did i just curse"?? Lol... S1 on point!!. Imma have to check out if they make stuff for the Cb7. I did my Awd using a mix of Crv and Oddessy parts. All stock bits, like the diff mount, support member the strut forks to fab it all up, oh as well as the diff, and trailing arms, rest is aftermarket bits like the LCA's, Camber and toe kits. But that S1 built mount and support member look so damn good.!!.
Dope!!! It was bad a$$ to see it at Racewars. Now I get to watch you build it..Can't wait to watch you send it!!
Man, i would've loved jump on board with the CRX Give away with powder coating of any parts that needed to be painted.
pin this please
Love it man I watch from nova scotia, keep it up 🤟🤟
That s1 kit 🫠💦🔥
I would love to do an AWD conversion on my K24A2 CRX. I'm not even sure where to start. BTW, the rain sounds relaxing.
I'm really hoping S1 does a kit for the Insight soon. Now that I have all my turbo components, it's time to get my AWD parts together!
You make me want to get my crx running every day even more
Beautiful build. Incredible foot work.
Big work! Truly awesome! Wish this was my car. My Honda is a bucket but I love er
Love your videos bro keep it up!
Dope content as always.keep it up.I was at the show but unfortunately didn't get a chance to meet you in person. Maybe next time...much love/support/respect from your Khmer folks out here in the Bay.
Dope video as always! 🔥🔥🔥
That came out clean af brotha
Such a AWESOME!!!! BUILD!!!👍😁💯💯💯
I know I gotta Stance Works K swap Ferrari episode to watch, but YounStaic got priority.
You make it look easy bro! hopefully one day I can join the AWD gang!
S1 is awesome good work YS looks good so far 👍 much love from Fresno California
Long live bro! I really love your channel! So educating as well! 🔥
Let's gooooo!!!!!
MY giveaway crx is looking🔥🔥🔥 can't wait to see her fully done.
Love the content it’s definitely been a big inspiration for my k20 awd swap, under construction
Cant wait till i win this car
Hell yea looks good. Please undercoat the whole bottom it’ll look so much better with the stainless S1 goodies
dope content Dana, keep pushing, you at 133K subs, i will be here to say wassup when you hit 500k, just keep doing your thang, much respect from a massive honda car culture in South Africa! Salute!!
Good stud man!!!! Keep up the hard work!!
Dam that’s a a well built awd drive setup
This build is awesome 😎
Man that setup looks hella good
There is no doubt you know your shit, my man!!
Hope you have time to shoot a bit at the show. Even just the car in the booth before opening or after closing.
Great stuff.
Yo has the giveaway entree closed yet? Recently found your channel and I love it man, im a junkyard guy too here in WA. Built my own ek out of it lol, greetings bro and keep up the awesome work🤙🏽
Yo, what part of WA you at friend? I just moved up here from SoCal last year and holding up in western WA. Love it here, love the "collector vehicle" plates too ✌
Coming along cherry brotha that s1 kit is bad*** looks clean cant wAit to see when its all said a done 👌
That's some serious hardware, I couldn't giveaway a car I put that much money and work into but that's just me, looks nice
Ur the best 🔥🔥🔥
Great content, great products… ❤❤❤
I know it's an old video, but I just saw it. Hell yeah, this is awesome. My question is about the transmissions in the AWD Honda setups. Do they always send power to the rear, like a Subaru? Or do they only send power to the rear after the fronts start to slip, like a stock CRV? No idea what kind of work goes into the trans on these bad ass AWD Hondas, but I sure do like the idea.
Oh I see California
I’m so mad I won’t be in town when you are coming to Florida.🥺🥺🥺🥺🥺🤬🤬, but like alway keep doing what you do💪🏼💪🏼💪🏼.
Keep up the great work, bro! You have a link to the white plastic wrapping you use to protect your paint?
You make me wanna go AWD!!
So if I’m using the CRV trans and diff I’d use 2 passenger for the back and what for the front? For my 93 EG hatch
is it just me or is the diff mount plate thats bolted to the LCA mount points bowed out towards the rear of the car? It look like it bowed when you first bolted it in and at 28:45 it looks bowed as well.
Very nice! That is what I have future plan for my 1989 Si & 1991 HF T-Rex. Please advise….
Yes sick
Awesome time!!! Can't wait for this month in Florida.
I cannot wait for all this to happen! 🙏🏼
🔥
I got a stupid question. Would the process be somewhat the same on a ed3 sedan?
How it going brotha
Dana could you pmo with a cheap crx? Lookin for sum in west coast, mainly in cali
Hey boss I been watching all your video , I got a 91 EF hatch auto , want to do k24 , what state you live in ?
YessUR
I have a 99 crv awd automatic,will those parts fit on my 89 crx to make it awd ?
Was goood??
All the cars u put together; u sell any of them?
Damn Dana you make it look easy! Thank you for your knowledge. How do we enter the giveaway??
Would love to have an AWD ef sedan
sheeesssh, NICE!
😍😍😍
Amazing 🤩
Love the progress! I appreciate your grind to build cool projects. Keep up with the dope content! How do you enter for the giveaway?
Sheeesh
Hey man I've always said I loved your clips and just so you no just wanted to give you a 41k lol I heard in ocean side junk yard alot of 87 84 86 honda hatchbacks are there 😉 just a tip bro
Man love your channel..I been watching your channel for long time. Specially the kit on AWD shout to S1 Build...you inspire me to wanna go AWD on 94 EG with 95 GSR swap. How do I sign up for the giveaway CRX?
Any chance you or someone u know has a lead on a set of a6/z6 arp head studs. I'm in desperate need for a set to finish my mini me. Arp is 2 plus months out
Try hittin' up BadGuys.
What do I need to do to enter to win the crx
Looks likes S1 need to rev up there kits to fit if……If I’m going to pay top dollar it should be bolt on. All that extra welding is not necessary if the is for an “EF” chassis. I’m Not hating cause they make awesome kits.
It can't be an all bolt on. It has to get welded for strength. We seen people using rivet nut style to bolt up and it will rip apart. We seen 1.250" bar bend. It has to be cut if you want your diff to sit in a proper spot. Believe me, we been trying to make it easy and strength at the same time. This was the best option. 👌
How can you get entered to win the crx?
Pretty much.
how much for a j front conversion on an integra
i love the content man
Nice 👍🏽
How can I do for the giveaway
Don’t use any power tools. * first tool is a electric drill followed by an impact. Lmao
That is a sexy A*s set up...... S1 Built & YoungStatic when their powers combine, you cannot go wrong... (poorly done Capt. Planet reference) I'm old.
First!
I want this car so bad😢
If only I knew how to weld lol
Yo static I finally got my own crx. Traded my BMW for it. Any chance you can get ahold of me? I'm trying to find a couple doors for a 90 dx
I may be able to help, I have 2 doors for a 90 or 89 crx. Not sure if this is what you ment?
Anyone looking for a ef hatchback shell I'm down in socal lmk
Your not fat your fluffy
quality parts but no torque wrench.
What did my hand say to the torque wrench? “I’m the torque wrench now bitch”
11:20 reminds me of ms Jackson Outkast's song ruclips.net/video/MYxAiK6VnXw/видео.html
Give to me plz i need a crx 😢
My brother, what’s the song on your outro? Please share