Это видео недоступно.
Сожалеем об этом.
TwoTrees TTC 450 CNC upgraded / changes, C&T ep 315
HTML-код
- Опубликовано: 15 фев 2023
- Just some basic things in the shop today, but we filmed the work going on for owners of the new TTC 450. Sometimes it's just another day of repairs or doing mods. Other topics on this channel include :wood projects, tools, tool repairs, custom jigs, basic wood shop work, wood tools, 3D printers, RV repairs, car repairs, custom work, metal, welding DIY, lasers, CNC
Free CNC software: www.inventable...
Free CNC software: winder.github....
TwoTrees TTC 450:
Product link and discount:
TTC450 link: bit.ly/3JnD2jL
$100 discount code: CTTC
______________________________________
Our business email contact: Coffeeandtools@Yahoo.com
Our store: www.mycoffeean...
This a little late but it may help new users that find this video. The wires rubbing against the frame is because the drag chain is attached too far forward on the Y axis . The rubbing cable that comes out of the end needs to bend back to connect. It can't bend back with enough slack to keep it out of the way of the fame when tied to the side of the upright. Unsnap a couple of bars (not the entire link) from the top of the Y drag chain to release a little more cable. This will let you wire tie it to the back of the upright instead of the side. The video on the SD card shows the cable tied to the back not the side. The cable doesn't get in the way of the limit switch when tied this way (tested).
Love you videos thanks for everything you share with us.
I sent this over to Two Trees and they said nothing back, but I hope it gets fixed. I cut about 10mm off the slot to reduce the "rub" issue which seemed like the simple fix. I wanted to keep the chain like OEM, but...your's is another good fix.
Thanks for the video , liked and subscribed.
I appreciate the cable management ideas absolutely can't stand loose and stray cables everywhere.
Due to weather I had to cancel the new tool for today, but figured, oh, lets fix something
Drives me NUTS when these companies don't engineer these things better. Come on TT!
Yeah that slot was like HOW does this happen ? I tried spacers etc, but in the end just open it up more and no more cable rub. The tech at TwoTrees said they would look into it and thanked me but I have to wonder if they'll fix it ? or ?
Two trees is known for this, that's why I'm going to pass. I have the SP5 3D printer and it's been nothing but issues.
@@dangerous8333 Interesting but only the cable rub was an issue. The rest of the TTC 450 seems to be pretty good.
Thanks Coffee and Tools for carefully making a nice video. Welcome all to share your opinion on the TTC450, let us make it better, and follow us to make more explore a laser engraver more. last, wish you all a nice day~😀
😀😀😀😀
Rad 🤙🏼
Kinda resembles a species in the early stages of evolution! Showing it here should hurry it’s development along… if they pay attention!!!
Thanx bud.
They are looking into it. I'm just walking on glass to show it with them. Might be on the black list now LOLOL....oh well, I did work in engineering offices for a bit and learned a lot about corporate meetings and how things get screwed up LOL.
@@SirTools me too… I managed R&D testing of bedding and furniture for 10 years. Egos, engineers who never touched a product and accountants who only worried about the bottom line made the job seem like I was constantly walking a high wire over a lion den. Good luck bud.
@@sassafrasvalley1939 You got the picture exactly :)
Could you show how to fix backlashes of axis, please?
A rubber “U-edge trim” could help clean-up/ Hide that “wobble”.(I forget what it’s called but it’s out there… “U-Trim”?…I used it on my sluice boxes to get rid of the long Sharp Edges.. It’s cheap and works great)..🤙🏼.
Ordered My 450 and I’m checking out what your doing w/ yours..
Thanks Barry
Do you think the rails and screws can be changed to make it longer for larger products?
mmm...I'm thinking why not ?
@@SirTools I have an xcarve and have see. Projects to extend the rails but it is my current working horse to risk having it down. I might try to get that done with a TTC. Thank you from Houston.
Have you think about upgrade the spindle to the 500w one? have found a lot of 500w kits for less than $80 but don't know if would work with the ttc450 or how will be the wiring to it
I've been looking into it and will have a show once we figure it out. Thanks for asking, it is a question that needs attention.
@@SirTools awesome, would be great if the cheap kits works in this machine so many user will be upgrading to it for sure, and would know how to wiring them
I just bought a Vevor 800w router.
Hello is possible cut alluminium with this cnc?
Rated for it, but I would do the 500 watt upgrade before cutting. TwoTrees listed Aluminum for it.
A 3D printer/laser/cnc combination.
A disaster 3³!!
Yeah, should be interesting to see it in action
It could cut the cable and cause serious problems
They still changed nothing
These companies are funny that way. We spend time back and forth with emails and pictures, and at the end of the day nothing changed.