View or purchase a kit on my website: www.remoteshifters.com Edit (2024) these are still being made in small batches every few months. Send an email to be on notification list. All info on the site.
Please explain in detail why your kit will not work with an '03 - '06 Escalade center console, cause that is exactly what I want to do. Maybe we can figure something out. No BS. Keep up the good work!!!
@@jhuff692 The cupholder portion of the console is completely different. My kit is made to come out exactly in the center of the left half of the cupholder in the silverado console to keep the actual cupholder functional on the right side. It would probably work but it would not look right, and I have no way of finishing it off with a shift boot since the cupholder is not removable like the silverado one to add a shift boot.
@@TyBrink I hear you. I am determined to get this done with the Escalade dash so if just a matter of the cup holder functionality I am willing to sacrifice that. I completely understand the engineering limit you described but Im sure I can figure out a solution that will look clean. Lookin out for your next vid!!!
That's a really clean looking install! I'm surprised gm didn't do this from the factory. It's cool you're doing a complete kit minus the console. Nice work designing the kit.
As ...you did the most important thing of all:. You still manage to provide 2 cup-holders. I have only one dislike - the lower (4wd) shifter location. That's too close to where my fat leg would be. Nonetheless, it's great to see that 'enterprise' is alive & well (even though you would think that we would see more of this 'cottage industry' ingenuity here on RUclips). Good job, Kid.
I just flipped the 4x4 handle 180 and i cut a slot for the lever and used that brush looking peice like what goes around the inner handles on chevy door panels
Very nice you did pretty much the same thing I did. Slight difference on mine I took a pair of old swing Springer forks and welded them together after I bent them, then I fitted the 4 by 4 knob on that. Interesting note since the 4WD shifter rod is now oval shaped you need to make a notch where the brush lined slot will interfere with the rod in 4wd low (Not a detriment considering its Spring steel & hidden behind the plastic consul panel).
Don’t own a Chevrolet, however I do own a 2010 6.4 F250 with a ZF6 and this has got me wanting to do this with a 2011+ center console in that truck🤙🏻🤙🏻
Sooo I just put this console in my single cab right. Kinda wanted to swap it to manual like my buddy did his. Now that I see this is possible. I may have to pull the trigger
Ty, you ain't responded in these messages for a few years brother. We need you. I need this kit. 😁 Sent you an email also. I'd be stoked if we got word from you. Heck even if you were to say, "sorry no longer making them" would be better than going through the trouble and spending money on an 03 console if we'll never get a chance to get this kit from you any longer.
Impressive concept and I wish you success, but I have concerns about duty cycle and failure points if this is the final product. The attachment point between bracket and transmission hump appears to be done by self-tapping metal screws. Please check often to see if these get pried up. The weld point on the new shaft will also be subjected to forces in multiple dimensions, stressing the weld. Lastly, it is not obvious but I hope you are using delrin shouldered bushings to bear the brunt of the wear, otherwise, the metal on metal contact of the dogbone ends on the yokes will gradually result in grooves and subsequent slack. A stronger design would have larger contact points between connecting shaft to shifters to distribute the oblique forces. Paint the parts to nullify the prospect of corrosion and failure of the device.
Hey RPM I see u are polite in a sense of criticizing Mr Brink's Ingenuity,but I was wondering if u could give me list of wat I might need to fabricate this shifter for a obs 95 chevy not including console and any other cosmetics TIA by the way Ty B ur an EFFIN BAdAss
It is a good ideal but I wouldn’t take it as no where criticizing are politely at all but if anything advice because something will happen it happens to anything but I do know as far for the bracket tack weld it are use JB weld on it before I crewed it down with red loctite but it is neat though fun GM stopped using them in 1500 but it’s now seems like more people r trying to use the old stick but guess with all the haters for combustion is going to end it all
The Remote console shifter concept is interesting and cool to see, but i honestly perfer the stock shifter in these trucks, also what do you do with all your stock shift levers? Im in need of one
I kept both of the levers I took out of this truck and my 04 RCSB. I really like the stock lever as well, I'll probably go back to it at some point in one of my trucks.
It probably depends mostly on the console you use. The kit might bolt up to the 93 transmission and function, but the angles, offsets, and measurements are all specifically for the 99-06 silverado using the 03-06 console. I believe the 90s consoles are all smaller and this shifter will most likely not work in any of them, that's if it even bolts up to the transmission.
Theoretically, could this kit be used in a Tahoe or a Yukon manual transmission swap? Given that the stock shifter location would come under the console in an undesirable spot. So this kit would bring it to a better location.
Will this work with a T56 or Tremec 6060 in this console? Or do you even need all this with one of those transmissions? Sorry I have an 01 RCSB that was a Procharged 4L80E truck and I sold the D1-SC to change the setup. I'm doing a different motor, ditch the 4L80E and go 6 speed.
This only works with the stock 5 speeds. With the t56 according to what I've read you only really need a custom shift lever to come up through the console since the rear shifter location comes out pretty close to under the cupholder hole.
@@TyBrink Thanks so much. I really want to get a ZL1 or CTS-V engine and transmission to drop in with just a ported blower, pulleys, intake, headers, fueling, clutch and tune with larger heat exchanger in the bottom of the bumper. But I'm considering throwing all my coilover suspension, 14 bolt, BBK, and an 06 HCI LQ9 with a 6 speed. That way all the kinks can be worked out and then maybe later on build a single turbo kit on the LQ9 making 700hp. With the D1-SC it was making 13 psi on a cam only 5.3 through a 4L80E and a 3200 stall. I was maybe making 550whp or so but I wasn't extremely impressed with how strong it felt.
I have a 97 extended cab manual transmission and iwant to do a 03-06 Silverado extended cab interior swap with the same set up you have. Do you think you’re shifter kit will work? Or do you think it will be different?
It all depends where the console ends up compared to where it does on the 03 silverado. It's probably not going to line up and have the shift knob centered in the cupholder.
Probably not from a corvette. You need something that is designed to handle a lot of weight. The zf6 came in 99-06 Silverado 3/4 ton trucks with the duramax that's probably the best option.
Any way to figure out if this works on the zf6? Been looking for a zf6 swap for my suburban and this would obviously work out amazing if it would work with that trans
The stock 5 speed shifter stick you mean? I sold the blue truck with the stock setup in it and I'm going to hang on to my stock one out of the silver truck. The factory rubber boot stays in the truck
I wouldn't recommend it. It makes shifting clunky and difficult, so you end up shifting slower than with the stock shifter. Not to mention the guy that makes them is very rude and hard to deal with, that's why I made this remote shifter kit to work with the stock shifter only. It shifts way easier and smoother with the stock shifter.
View or purchase a kit on my website: www.remoteshifters.com
Edit (2024) these are still being made in small batches every few months. Send an email to be on notification list. All info on the site.
Please explain in detail why your kit will not work with an '03 - '06 Escalade center console, cause that is exactly what I want to do. Maybe we can figure something out. No BS. Keep up the good work!!!
@@jhuff692 The cupholder portion of the console is completely different. My kit is made to come out exactly in the center of the left half of the cupholder in the silverado console to keep the actual cupholder functional on the right side. It would probably work but it would not look right, and I have no way of finishing it off with a shift boot since the cupholder is not removable like the silverado one to add a shift boot.
@@TyBrink I hear you. I am determined to get this done with the Escalade dash so if just a matter of the cup holder functionality I am willing to sacrifice that. I completely understand the engineering limit you described but Im sure I can figure out a solution that will look clean. Lookin out for your next vid!!!
I have a 99 Chevy Silverado single
Any promocodes?
Soooooo your bringing the kits back, I am totally gonna buy one for mine
This awesome man. I love when ppl aren’t afraid to show there process and not hide anything. Great stuff man
That's a really clean looking install! I'm surprised gm didn't do this from the factory. It's cool you're doing a complete kit minus the console. Nice work designing the kit.
I totally agree i heard dodge is no longer making manual trucks 2021.....
I finally saved up to get a manual single cab, restock bro we need you lol
If I ever find a silverado manual clean enough I'll certainly order your kit!
mecaniquejp same bro
Just bought one today guess what ima do
Same
As ...you did the most important thing of all:. You still manage to provide 2 cup-holders.
I have only one dislike - the lower (4wd) shifter location. That's too close to where my fat leg would be.
Nonetheless, it's great to see that 'enterprise' is alive & well (even though you would think that we would see more of this 'cottage industry' ingenuity here on RUclips).
Good job, Kid.
Are you still selling them? I saw there sold out.
Man this has inspired me to do this to my 2003. awesome stuff
Good lord I never wanted a Chevy more
Found you by someone’s comment on another post awesome design will be ordering 1 for my 06 5 speed soon 💪🏼
I just flipped the 4x4 handle 180 and i cut a slot for the lever and used that brush looking peice like what goes around the inner handles on chevy door panels
Very nice you did pretty much the same thing I did. Slight difference on mine I took a pair of old swing Springer forks and welded them together after I bent them, then I fitted the 4 by 4 knob on that. Interesting note since the 4WD shifter rod is now oval shaped you need to make a notch where the brush lined slot will interfere with the rod in 4wd low (Not a detriment considering its Spring steel & hidden behind the plastic consul panel).
Absolutely gotta buy one. Gives me hope for my sad auto burban
Awesome work so clean it looks like it rolled out the factory that way. Merry Christmas
When they coming back in stock I need one of these in my life
He has a few in stock rn they go quick, if not send him a email he’s real good at responding quickly and letting you know when there in stock
Don’t own a Chevrolet, however I do own a 2010 6.4 F250 with a ZF6 and this has got me wanting to do this with a 2011+ center console in that truck🤙🏻🤙🏻
I'm glad to see this I have a 2006 GMC Yukon XL 53 two wheel drive I will be converting to a manual I can't wait for it to be done
I'm shopping around for one of these trucks, hard to find one not totally roaches out... But if you still sell these I consider it a must-have!
nice i cant wait for mine to come in the mail. i will send you before and after pictures
These are sick asf and with a short throw shifter that would make it feel even better good idea bro🔥🔥🔥
My truck is automatic but if it was manual, I'd love to do this. Great job!
Convert it to a manual lol
@@josemartell1346 if I had the money I would. 😎 Right this moment I'm in the middle of replacing the engine.
@@MarkPdot A year later what about now?
Agreed. What about now? I’m about to manual swap mine and found this absolute gem of a video
Still too broke to do the swap.
Awesome looking and sames very practical hop to buy one soon when it's available nice work man.
If you make a kit for 98 and older I'll buy it!
Such a cool idea I really like this mod well done bro.👍👍
Going to save up so I can purchase one for a future project on my 05 Sierra 1500.
Sooo I just put this console in my single cab right. Kinda wanted to swap it to manual like my buddy did his. Now that I see this is possible. I may have to pull the trigger
Ty, you ain't responded in these messages for a few years brother. We need you. I need this kit. 😁 Sent you an email also. I'd be stoked if we got word from you. Heck even if you were to say, "sorry no longer making them" would be better than going through the trouble and spending money on an 03 console if we'll never get a chance to get this kit from you any longer.
Impressive concept and I wish you success, but I have concerns about duty cycle and failure points if this is the final product. The attachment point between bracket and transmission hump appears to be done by self-tapping metal screws. Please check often to see if these get pried up. The weld point on the new shaft will also be subjected to forces in multiple dimensions, stressing the weld. Lastly, it is not obvious but I hope you are using delrin shouldered bushings to bear the brunt of the wear, otherwise, the metal on metal contact of the dogbone ends on the yokes will gradually result in grooves and subsequent slack. A stronger design would have larger contact points between connecting shaft to shifters to distribute the oblique forces. Paint the parts to nullify the prospect of corrosion and failure of the device.
Hey RPM I see u are polite in a sense of criticizing Mr Brink's Ingenuity,but I was wondering if u could give me list of wat I might need to fabricate this shifter for a obs 95 chevy not including console and any other cosmetics TIA by the way Ty B ur an EFFIN BAdAss
It is a good ideal but I wouldn’t take it as no where criticizing are politely at all but if anything advice because something will happen it happens to anything but I do know as far for the bracket tack weld it are use JB weld on it before I crewed it down with red loctite but it is neat though fun GM stopped using them in 1500 but it’s now seems like more people r trying to use the old stick but guess with all the haters for combustion is going to end it all
Beauty kit... you think this counsel and kit would work well for a 94’ Silverado OBS with a 5 speed NV4500?
If only someone made something similar for my 01 F150 5spd
are these ever going back on the market ?
The Remote console shifter concept is interesting and cool to see, but i honestly perfer the stock shifter in these trucks, also what do you do with all your stock shift levers? Im in need of one
I kept both of the levers I took out of this truck and my 04 RCSB. I really like the stock lever as well, I'll probably go back to it at some point in one of my trucks.
this is badass, id definitely get one if i had a manual cateye (or 99 - 02) but instead ive got a 95 f150 maybe ill build one for that lol
Would gladly pay you for your product but looks like you’ve been sold out for a while so to my machine shop I go👍
Message sent! Love it. Nice work
Saving up for one now😂
Very cool, man. I suppose it would work on an 03-06 avalanche. Not sure, though.
Would need a factory 5 speed transmission, they didn't come manual but could be swapped
@@TyBrink yeah, just getting into a swap right now.
Cool setup
Needs a handbrake now.
Any time frame on when you’ll have some back in stock? I’m interested for my 2000 single cab
When will you re stock
Need on for 07 newer gm C Sierra now.
Can you show how does the 4x4 stick shifter works
Will these be available again soon ? I need this
Who all makes these since every time I check your out did you stop making them
Waiting for them to be in stocked for I can order one
Be making more of these? Say out.. 😢
Even though my shortbed Silverado is a 6banger right now I'm definitely gonna get one I was waiting on you to start selling them again
Great job
Buena informacion saludos desde México una pregunta se podrá aser le el cambio a una Tahoe 2005 aser la de transmisión manual saludos
Would this kit be possible too use on a 93 ck1500 reg cab? Or do you think it wouldn’t be far from working with a little extra fab?
It probably depends mostly on the console you use. The kit might bolt up to the 93 transmission and function, but the angles, offsets, and measurements are all specifically for the 99-06 silverado using the 03-06 console. I believe the 90s consoles are all smaller and this shifter will most likely not work in any of them, that's if it even bolts up to the transmission.
When are the kits ganna be in stock? Be awesome if you can let us know!!! Awesome single cab!
I put a batch of them on the site a few hours ago. Just have a couple mgw ones left as of right now
Thanks you boss!I didn’t see that I’ll try to catch the next batch of camaro shifters
Dude! I’ll buy this kit if it’ll work for a T56 I need this
When will you have more for sale?
Will you be selling these again trying to buy one but says all sold out?
are these still available i’ll love this
THEY ARE SOLD OUT NOOO😩😩😩please bring them back!
Do you still make these, they been sold out 😖
Still making them everytime I Check they’re sold out??
Did you ever figure out if this kit works with a zf6? Gonna be swapping my lbz in the spring and looking for a remote shifter kit
Looks awesome! Do you know if anyone makes this similar kit but for the generation before yours, the OBS ?
Not that I know of.
I love it bro ,,,gotta have one for my truck. Do you make anything for the 2500/3500 ?
This kit works with the 99-06 hd trucks with the nv4500 5 speed. Zf6 is unconfirmed, may or may not work.
11" from the front of the knob or tge middle? should i greese the tie rod withthe fitting before installing?
11" to the middle is good. I always grease the tie rod when I make the shifter but it wouldn't hurt to put a tiny bit of fresh grease in.
I want the short throw shifter not the stock long throw
Theoretically, could this kit be used in a Tahoe or a Yukon manual transmission swap? Given that the stock shifter location would come under the console in an undesirable spot. So this kit would bring it to a better location.
It would work if you use a factory 5 speed transmission, probably don't want to use the nv3500 for weight reasons so that leaves the nv4500.
Are u going to have more remote shifters built
I need a kit for my 02 yukon. But I wanna keep it automatic. I wanna put the TBSS shifter on it and replace the neck shifter
Will this work with a T56 or Tremec 6060 in this console? Or do you even need all this with one of those transmissions? Sorry I have an 01 RCSB that was a Procharged 4L80E truck and I sold the D1-SC to change the setup. I'm doing a different motor, ditch the 4L80E and go 6 speed.
This only works with the stock 5 speeds. With the t56 according to what I've read you only really need a custom shift lever to come up through the console since the rear shifter location comes out pretty close to under the cupholder hole.
@@TyBrink Thanks so much. I really want to get a ZL1 or CTS-V engine and transmission to drop in with just a ported blower, pulleys, intake, headers, fueling, clutch and tune with larger heat exchanger in the bottom of the bumper. But I'm considering throwing all my coilover suspension, 14 bolt, BBK, and an 06 HCI LQ9 with a 6 speed. That way all the kinks can be worked out and then maybe later on build a single turbo kit on the LQ9 making 700hp. With the D1-SC it was making 13 psi on a cam only 5.3 through a 4L80E and a 3200 stall. I was maybe making 550whp or so but I wasn't extremely impressed with how strong it felt.
have any kits for a t56 in one of these trucks?
I like it could you make it to be lower
I could make it lower but I didn't want to make these kits that I'm selling too low and hard to shift.
Manual swap a Tahoe/Denali?
Can this be done to a 2001 chevy tahoe ls 2wd?
Are the boots and templates still available as of February 2021? Looking to do this currently.
Would it work for an avalanche or no z66 03
Can they also fit on a 96 Silverado? Or u have to make more changes on it
Wish I could find one for a Corvair, that would shift directly at rear transmission.
Hey man does the console for the 03-06 Tahoe work ? Because I am looking to order one of these 🔥 great work man
Yes 03-06 Silverado sierra Tahoe suburban yukon avalanche. Only ones that don't work are Escalade or Denali.
@@TyBrink Great thanks
Are you still making these ??? I’m interested in a kit !!!
Badass
I have a 97 extended cab manual transmission and iwant to do a 03-06 Silverado extended cab interior swap with the same set up you have. Do you think you’re shifter kit will work? Or do you think it will be different?
It all depends where the console ends up compared to where it does on the 03 silverado. It's probably not going to line up and have the shift knob centered in the cupholder.
So the 03-06 Silverado center counsel has that pre-cut on the side for 4x4 floor shift?
No, I designed the shape to cut the side of the console to fit around the 4x4 cover.
@@TyBrink How much for a template?
@@DatdudeTi $20 on my website www.remoteshifters.com
Are you still selling the kits. The link shows everything sold out.
Are you still making these ?
Still make these kits
what would be the best 6 speed manual transmission to swap into a 2001 Suburban? from a corvette??
Probably not from a corvette. You need something that is designed to handle a lot of weight. The zf6 came in 99-06 Silverado 3/4 ton trucks with the duramax that's probably the best option.
Any way to figure out if this works on the zf6? Been looking for a zf6 swap for my suburban and this would obviously work out amazing if it would work with that trans
There's no way to know without trying, I had one guy buy one and say he had a zf6 but I haven't heard anything.
Is this still available for sale?
Will this work on 04 Tahoe
What transmission did you use and what was the total cost I’m looking at doing it to my 01 suburban and can’t find a lot of info on it
This is a factory 5 speed truck, I've never swapped a transmission.
Get these back in stock, please lol?
I would be interested in buying the oem shifter and boot if it's still available
The stock 5 speed shifter stick you mean? I sold the blue truck with the stock setup in it and I'm going to hang on to my stock one out of the silver truck. The factory rubber boot stays in the truck
Any chance you are willing to do a how to make the kit for those who cannot afford the $375
He made the video earlier.
ruclips.net/video/rJmB-lUfTZs/видео.html
Will it fit in a regular cab?
When can I order one of these bad boys ?
Is there a short throw shifter option for the nv3500 is so do you mind telling me a part number
I wouldn't recommend it. It makes shifting clunky and difficult, so you end up shifting slower than with the stock shifter. Not to mention the guy that makes them is very rude and hard to deal with, that's why I made this remote shifter kit to work with the stock shifter only. It shifts way easier and smoother with the stock shifter.
Do you sell this conversation kit?
Hi
Can I use it for 2005 Yukon
I want one for my 01 hd...
👌👌👌👌👌