It was very helpful. I have a 2005 with the same issues and it was dying on me when I was driving and had the same lights. use my code reader and it was the same Code. so yes I found it very helpful and thanks.
I have been battling with mine for a while now not knowing I and my mechanic was confusedly changing Bank 2 sensor on the driver side , instead of bank 1 which was on the passenger left hand side as simply showcased on this video by Felix .. After watching this video last night , went up straight this morning to go purchase the bank 1 camshaft position sensor and after which returned back to mechanic workshop and told my mechanic that I was privileged to have seen a video of where the trouble code of P0340(Bank 1 Camshaft Position sensor A was actually located .Summarily we got it fixed today and the service engine soon , slip and vdc indicator light disappeared as illustrated on this very video by Felix .. All thanks to Felix for this helpful video… You got me subscribed to your channel immediately..
Great job. You save me 200 dollar! Also, insert sensor first then go to the connector is smart. Most importantly, nice clean and stright forward video.
@@queenmacutiecarter8840 my 04 fx 35 slip & vdc off light coming on, stalling while driving, no powersteering then when stalled but slip it in neutral 2 restart. Now stalled & wont restart. All started after hitting a large puddle of water 3 wks ago😢. 🙏 Felix has the fix here for my ride❤
I have the same engine light as in your video. And I use Obd2 for Nissan and it gave me P1148 code because on but the same problem you mentioned in your video is what I had .
I Have 2005’ Infinity FX35, That I Just Bought Off A Buddy Of Mine & He Was The Only Owner & Original Owner, He Had Told Me You Got To Find Out Why The Abs, Slip, VDC, & Service Engine Light Is On, The Vehicle Had Sat For A A Year & A Half, Not Being Driven, He Has New BMW Now & This Was His 1st Car I Believe, Back In 2005’ & Bought It New, But Anyway, I’m Trying To Find Out Why All These Lights Are On Dash, So I Had My Buddy Scan The Codes & The Camshaft Positioning Sensor Came Up But Not Telling Us Which One, So I’m Gone To Replace Both Camshaft Positioning Sensors
Hi, It knows if it is a sensor on each side or there are 2 sensors on each side. In my Infiniti it says (Sensor A, Bank 2) will there be sensor A and sensor B on the side of the camshaft ? Congratulations for your videos.
Thanks for the video I was able to change the the sensor but when I started the car the check engine light was still on. Any advice? I had the same code as you
@@FixitFelix529 please! j'ai la même Infiniti malheureusement quand j'actionne le bouton AWD (pour passé en 4 roues motrice) la lumière verte n'apparait plus sur le tableau de bord quoi faire?
Just Bought This FX35 Off Of Him 2 Weeks Ago, When My Other Older Acura Integra 2 Door Coupe 99’ Had Blew Timing Belt On Me Driving Home, So I Had Most Likely Engine Damage, & Sold The Car As Is To Another Mechanic, That Wanted A Project Car, & That Car Was To Small For Me & Givened To Me Free Anyway Which I Really Didn’t Want The Car, Cause I’m A Electrician, Am A Truck Guy Or SUV Guy, Carry A lot Of Tools, So If Anyone Can Help Me Out With My New 2005’ Infinity FX35 AWD 3.5 Liter V6, So I Can Take It For Inspection
Hey Have Same Car 2005’ Infiniti FX35 AWD Check Engine Light On, VDC On, Slip On, & AWD Light On, Replaced Both Rear Camshaft Positioning Sensors, Cause Car Would Stall Out & Shutoff While Driving, Now I Bought Nissan Oem Camshaft/Crankshaft Positioning Sensors Which I Got In A 3 Pack, 2 Rear Camshaft Positioning Sensors Which Were Already Replaced, But Did Not Install The 3rd Crankshaft Positioning Sensor Towards Front Of Motor, Still Have The Part New But Not Installed Yet Only 2 Rear Camshaft Positioning Sensors Were Replaced But Lights Still On, Also Replaced 2 Front Abs Wheels Speed Sensors Front Left & Right Wheels With All New Rotors & Ceramic Brake Pads, Can U Help Me Figure Out How To Get These Frigging Dash Lights Out, Had Code For O2 Sensor Bank 1 Come Up On Scanner & Front Right Wheel Speed Sensor, Both Front Were Replaced, Lights Still On, Dont Know If Dude That Did The Work On My Front End Tried To Clear Codes Or Not
My old sensor is stuck and will not release from carriage. I press the tab down and it either won't stay unlocked or I can't get the sensor to release. Are there any tricks to help it come out?? I don't wanna break it. lol
Very Detailed and the actual photos that pops up really makes it easier. Excellent 2:25
5 Stars
Bro !!!!!yall fr need to follow this step by step !!!is super easy !!!!thanks man !!!
This guy saved me 200 bucks !!!
😊
It was very helpful. I have a 2005 with the same issues and it was dying on me when I was driving and had the same lights. use my code reader and it was the same Code. so yes I found it very helpful and thanks.
Hi
Thank you so much. I will be attempting this tomorrow. Machines wanna charge 190 just for labor. You make it look doable 😂Thanks again
Good luck 👍🏻
This was by far the best video for this type of repair. Excellent!
I have been battling with mine for a while now not knowing I and my mechanic was confusedly changing Bank 2 sensor on the driver side , instead of bank 1 which was on the passenger left hand side as simply showcased on this video by Felix .. After watching this video last night , went up straight this morning to go purchase the bank 1 camshaft position sensor and after which returned back to mechanic workshop and told my mechanic that I was privileged to have seen a video of where the trouble code of P0340(Bank 1 Camshaft Position sensor A was actually located .Summarily we got it fixed today and the service engine soon , slip and vdc indicator light disappeared as illustrated on this very video by Felix .. All thanks to Felix for this helpful video… You got me subscribed to your channel immediately..
I am happy to help 😊 is because of comments like this that I keep making videos to help people.
good luck and enjoy your ride 👍🏻
Bank 1 is designated by which bank cylinder 1 is located.
Very straightforward.... Thanks a lot... I had the same issues too I will be fixing it today
Great job. You save me 200 dollar! Also, insert sensor first then go to the connector is smart. Most importantly, nice clean and stright forward video.
It help me a lot thanks
Will this make the car not go forward
It's now $540 in 2023!
@@jaycreezle wonder best place to get the part will be if not on line...old school here
Thank you I’m going to try and do it my self this will save me $80
Tenia mismo problema y hoy lo solucione,gracias a usted 👍👏
DUDE...you just saved me a shitton of money ...you & your video were extremely helpful...thanks man
Happy to help 😊
Great video, I was having the same problem with my 2004 infinity FX35, Thank you man!
If u don’t mind, wat was the car doing huhh?
@@queenmacutiecarter8840 my 04 fx 35 slip & vdc off light coming on, stalling while driving, no powersteering then when stalled but slip it in neutral 2 restart. Now stalled & wont restart. All started after hitting a large puddle of water 3 wks ago😢. 🙏 Felix has the fix here for my ride❤
Replaced mine yesterday. What a pain in the ass.. Lol. Don’t want to do it again anytime soon!!
I have the same engine light as in your video. And I use Obd2 for Nissan and it gave me P1148 code because on but the same problem you mentioned in your video is what I had .
Thank you brother,great video. Blessings.
This is just perfect, nailed it.
Your video was very helpful thank you
Great job thanks and don't stop!
Thanks a lot . I have followed your video and it helps a lot .
Thanks for this Felix. It helped me a lot
Thank you great video editing also.
Great video !!! Thanks man !!! I’ll comment after
Great video I have same car same year
This is good and worth subscribing 👍 Keep it up👍
Thank you
Do you recommend changing Both sensors at once?
Thank you brother
Thanks.
Hi great video. I will be doing the same. I have the same car. Currently have the check engine light and same code. Were u located
Nice , thank you
Thanks
2:08 thank you
Gracias felix
I Have 2005’ Infinity FX35, That I Just Bought Off A Buddy Of Mine & He Was The Only Owner & Original Owner, He Had Told Me You Got To Find Out Why The Abs, Slip, VDC, & Service Engine Light Is On, The Vehicle Had Sat For A A Year & A Half, Not Being Driven, He Has New BMW Now & This Was His 1st Car I Believe, Back In 2005’ & Bought It New, But Anyway, I’m Trying To Find Out Why All These Lights Are On Dash, So I Had My Buddy Scan The Codes & The Camshaft Positioning Sensor Came Up But Not Telling Us Which One, So I’m Gone To Replace Both Camshaft Positioning Sensors
Hi, It knows if it is a sensor on each side or there are 2 sensors on each side.
In my Infiniti it says (Sensor A, Bank 2) will there be sensor A and sensor B on the side of the camshaft ?
Congratulations for your videos.
Awesome. the selection kf gears in my infiniti comes with a "thump" sound and after a while it totally stops selecting gears. Pls what do I do??
Thanks for the video I was able to change the the sensor but when I started the car the check engine light was still on. Any advice? I had the same code as you
Sometimes you have to drive the car for a couple hours and it goes away in its own if the problem is fixed
Love it, thank u
Gracias muy bien
Meu Fx 45 está com problemas no sensor do crank e não tem corrente nas velas
Why in a couple of your videos the sensors covered in oil?
What about for p0345 would it be the same sensor or is it different?
Hi is Code P0340 Bank 1 for passenger side?
Yup! That's the same code I have..
Don’t forget to unplug the battery to make sure old codes get erased and out of the way
Merci beaucoup!
tu es la bienvenue je suis heureux d'aider
@@FixitFelix529 please! j'ai la même Infiniti malheureusement quand j'actionne le bouton AWD (pour passé en 4 roues motrice) la lumière verte n'apparait plus sur le tableau de bord quoi faire?
@@9090lupin vérifiez vos fusibles
@@9090lupin il devrait y en avoir un dans le compartiment moteur et l'autre à côté des pagaies du conducteur
@@FixitFelix529 Merci!
Do the 2008 infini fx35 have only one camshaft sensor ? I am going to try to do it myself
Good
Is it the straight 1 or curve? For 04 fx35
Was the car cranking before you replaced the sensor? I have those same lights recently but does it cause the car to car but not start?
My engine is cranking and I have not replaced the sensor(s) yet. It does take longer than normal for the engine to turnover.
Can this sensors cause hard starting?
I replace the sensors disconnected the battery and my car has a hard start and all 3 lights are on after I replace them☹.
Mines as well smh
What was the problem?
I had a bad sensor from the store replace an it works fine after of hours of going crazy ✌🙏
How many camshaft sensor 2 or 3? Need to replace them or only one?
Changed both always
Was this the right side or left side ?
Q sensor trocou?
Also, 2006 fx 35
I just got the p0300 code random misfire my car starts loss of power and I smell gas going through exhaust any advice
Hi i have a code for p0345 camshaft position sensor bank 2. Is bank 2 on the driver side or passenger side??
Driver side
Driver side
Just Bought This FX35 Off Of Him 2 Weeks Ago, When My Other Older Acura Integra 2 Door Coupe 99’ Had Blew Timing Belt On Me Driving Home, So I Had Most Likely Engine Damage, & Sold The Car As Is To Another Mechanic, That Wanted A Project Car, & That Car Was To Small For Me & Givened To Me Free Anyway Which I Really Didn’t Want The Car, Cause I’m A Electrician, Am A Truck Guy Or SUV Guy, Carry A lot Of Tools, So If Anyone Can Help Me Out With My New 2005’ Infinity FX35 AWD 3.5 Liter V6, So I Can Take It For Inspection
Hey Have Same Car 2005’ Infiniti FX35 AWD Check Engine Light On, VDC On, Slip On, & AWD Light On, Replaced Both Rear Camshaft Positioning Sensors, Cause Car Would Stall Out & Shutoff While Driving, Now I Bought Nissan Oem Camshaft/Crankshaft Positioning Sensors Which I Got In A 3 Pack, 2 Rear Camshaft Positioning Sensors Which Were Already Replaced, But Did Not Install The 3rd Crankshaft Positioning Sensor Towards Front Of Motor, Still Have The Part New But Not Installed Yet Only 2 Rear Camshaft Positioning Sensors Were Replaced But Lights Still On, Also Replaced 2 Front Abs Wheels Speed Sensors Front Left & Right Wheels With All New Rotors & Ceramic Brake Pads, Can U Help Me Figure Out How To Get These Frigging Dash Lights Out, Had Code For O2 Sensor Bank 1 Come Up On Scanner & Front Right Wheel Speed Sensor, Both Front Were Replaced, Lights Still On, Dont Know If Dude That Did The Work On My Front End Tried To Clear Codes Or Not
Where’s the link for the part please?
Will this cause car to not start
What about the other sensors, aren’t there 4 in total
Not true my lights they still on even I changed.
Knock
Sensor 1 Circuit High
Input
{Bank
1) where this place
if you want to buy the camshaft position sensor click below
amzn.to/3HiKYOk
Hi my car has the same problem, how many sensor do i have to buy?
Be shyly Desrosiers take it to auto zone so they can give you the engine code. They will tell you which one you have to replace
This is the same code it show p0340
Be shyly Desrosiers If it’s the same card I have on the video then just follow what I did on the video
@@Legacy-yw8pn qq
My code has a p0345 is it the same sensor ?
No, the sensor for the 345 code is on the driver side which is bank 2
My old sensor is stuck and will not release from carriage. I press the tab down and it either won't stay unlocked or I can't get the sensor to release. Are there any tricks to help it come out?? I don't wanna break it. lol
Those sensors are really hard to get out sometimes. You have to press the clip down first until you hear the click sound. Then it should come out.
Yeah I am having the same issue. This sensor is tough to get off. Still working on just that step :(
I have a problem with this sensor, can you tell me where it is, but set it please/Knock
Sensor 1 Circuit High
Input
{Bank
1)
🌺🌺🌺
Where the code p0328
Didn’t work…
Excellent video and tip !
Very specific and detailed information! Thanks.