Dude! I am always on the lookout for recovery gear/equipment storage options for my single cab 4X4 truck I always bemoaned the lack of inside the bed storage/waisted space/waisted opportunity .. I've spent hours looking at marine storage options , marine compartment doors and fabricating my own out of Star Board ... I never thought about the tailgate! .. too bad it's not for an 09 😢
yes we do! But you would need to remove your step to make it work. We have not done this process before so are not 100% sure what is involved and if it is a simple as just unbolting it.
How about 2nd gen Tacoma? Noticed responses to working on 3rd gen. Been wanting a better tailgate option, knowing storage was possible! This looks great.
I love it but I’m wondering how does it do with water along the top. Is there a weather strip that prevents water from getting in and is there drain holes at the bottom.
We have a rain seal available for those who don't have any sort of cover over the tub/bed. In Australia most people have a canopy or tonneau cover, but this seems less common in the USA and many people run with open beds.
@@rhysc375 - Would be really cool/useful if the bottom half of the storage unit could be molded from abs or hdpe, which might not only allow for more useable (wider/deeper) storage capacity but this might also help reduce fabrication time and/or shipping weight (...just some design thoughts:) All the best to you & Huracan Fabrication in 2021!
@@huracanfabrication - Hmm... have you looked into all 3D printing options/technologies(?) Industrial 3D printing might make more sense over injection molding(?)
Will this have any affect on the tailgate camera and is there any hydraulic lift assist suitable to work in conjunction with this? Am soo badly wanting to buy 1 but am also wondering if they are water tight
Hey mate, its a fairly straight forward DIY fit, but if you are unsure you can take it to any local panel shop and they will be able to do the install for you
![MURDER DRONES Series Finale [TRAILER]](http://i.ytimg.com/vi/p6mhC5Iatns/mqdefault.jpg)
Dude! I am always on the lookout for recovery gear/equipment storage options for my single cab 4X4 truck
I always bemoaned the lack of inside the bed storage/waisted space/waisted opportunity .. I've spent hours looking at marine storage options , marine compartment doors and fabricating my own out of Star Board ... I never thought about the tailgate! .. too bad it's not for an 09 😢
i was wondering who fit the tailgate storage to maca's ranger. Another great BNB/#shedlife colab. Will need to get this for my Raptor
I'd love one of these for my 3rd gen tacoma!
Working on one at the moment :-)
How’s the 3rd gen Tacoma development going?
@@huracanfabrication Need one foe 2nd gen tacoma!
Who makes them for the 3rd Gen Tacos??
2020 Ram 2500 with Rambox please... I'd order it right now! This is a great idea!
Oh yes we are working on it :-)
Man, I’d love one of these for my Ram Rebel.
what year model is it mate?
@@huracanfabrication 2019
@@LillyCocoBean Ok we have the earlier models up to 2018 finished in the prototyping stage, the newer body we will be starting in the coming months
@@huracanfabrication does it work for a 2019 ram classic
@@ryanbailey3423 We will have one for Ram 2019 soon
Should make one for the Ford maverick in the future since it's limited on space since it's so compact
sure we have plans for many models, just a matter of getting the tailgates in-house 🙂
Looks really good. How strong is it when closed? Can an adult man stand on it to climb in the truck bed? I do this sometimes.
Most certainly, this lid is stronger than the factory tailgate once installed.
@Huracan Fabrication Exactly what I'm looking for! Any chance if it would fit in a Gen 2 Toyota Tundra (2012) tailgate?
We certainly have one in development :-)
Awesome, and subbed! Anything in the works for a 2017 super duty? I'd gladly lose the tailgate step for one of these!
yes we do! But you would need to remove your step to make it work. We have not done this process before so are not 100% sure what is involved and if it is a simple as just unbolting it.
How about 2nd gen Tacoma? Noticed responses to working on 3rd gen. Been wanting a better tailgate option, knowing storage was possible! This looks great.
We are working on it, 3rd gen first then we will look at 2nd gen
Good Morning, Just saw your info, love it , do you have one to fit the 2020 Dodge Ram 3500?
Hi mate not yet but we will be looking into it this year
@@huracanfabrication I’d love one for the current Ram 2500 which should be the same as the 3500
@@michaelbarber6215 We will be working on one shortly mate
Holy crap! Design this for a Nissan Titan (2020) and I'll buy two!
We are working on a wide range of USA tailgates at the moment. We have not done a Titan but it is on the list!
Got a 2020 ram 1500 tradesman classic. when will these be available for them? Went on your site and could only find 3 SUV style options
Yes our USA website has limited options as we are only just starting to expand there. Ram Tailgate storage will be coming in around 2 months or so
I like this mod.
More information needed here what about backup cameras.... clearance, for the install?
I have a 3 gen toyota tacoma
Hi Tyler,
We have allowed for factory fitted items such as backup cameras. Check out our website for more info.
Do you have to remove the glue strip at the bottom of the tailgate and top strip that held the tailgate liner in?
It varies between models mate, email us directly for more information about your model
admin@huracanfabrication.com
I love it but I’m wondering how does it do with water along the top. Is there a weather strip that prevents water from getting in and is there drain holes at the bottom.
Hey mate yes there is a rain seal which we sell that goes along the top edge and keeps rain out if you have an open tub!
Does this fit with a central locking kit in the tailgate of a PX3?
Hi mate yes it does fit with the factory central locking
How about a 2nd gen Tacoma? Noticed comments about wiring on 3rd gen
ممتاز سوف اصنع مثله بسيارتي الرينجر 2022 FX4
لا توجد مشكلة يمكنك مراسلتنا عبر البريد الإلكتروني للحصول على عرض أسعار على الشحن sales@huracanfabrication.com
For my 2015 tundra, how much does this toolbox insert weigh? Does it still allow for functional tailgate lowering assist? Ty
Hello,
It weighs about 40 lbs for Tacoma. Yes you can still use the lowering assist in combination with our storage design.
Hi HF! Just wondering if these are sealed and no water can get in when they're closed
Hi Lachlan,
We have an optional rainseal for those that dont have any sort of cover over their tub. Just let us know when you purchase
hey bud just what i needed do you guys currently have one avail for a 02 f250 super duty. my stock tailgate does not have a step or camera
We are working on F truck storage at the moment mate but the earlier models are still quite a way off. Likely towards the end of 2021
Is this water tight?? Seems like water can easily get in with the tailgate up
We have a rain seal available for those who don't have any sort of cover over the tub/bed. In Australia most people have a canopy or tonneau cover, but this seems less common in the USA and many people run with open beds.
2 questions;
1. do you have one that'll fit 2022 Triton
2. can you install it for a fee?
No sorry we havent had a Triton to look at yet
What's the lid made out of? Metal or plastic?
Electrogalvanized steel mate
What about for 00 dodge ram diesel 2nd gen?? I'm interested..
Will this fit a 2019 Ford F-150? With rear camera, no step.
This one will not, but we have a separate model coming for the F150. It should be ready in the coming months
Does this include all years of rangers? Would it fit a 1998 ranger. (Not step side)
No sorry mate, this is for the PX ranger only
Would you guys happen to have something for 2015 Ford F-150 tailgates?
Yes we do 🙂
hfabusa.com/products/ford-f150-tailgate-storage
En then you launch your newly developed rocket into space. Rocket science!
Any installation step by step video for 3rd gen tacoma?
No, but if you email us I can send you a PDF of the install process. Its broadly similar though.
Any chance you have a model for the Chevy Silverado 14-18 trucks?
Sure do!
hfabusa.com/products/chevy-silverado-tailgate-storage
If i have the factory tailgate auto lock accessory on my tundra will this tailgate storage unit work with it??? I have a 2020 tundra.
if you can email us some photos of that we can make sure first, we have made a few to fit the POP n LOCK
@@huracanfabrication sounds good. I will email you some photos
do you have one that will fit a 2015 tundra 1794 edition?
We will be working on one this year :-)
@@huracanfabrication awsome let me know n keep me in mind im interested!!!
I’d get one as well!
Hoping for one on an f150, Do you think that'll ever be available?
We are working on one at the moment :-)
What year is your F150?
@@huracanfabrication was about to ask the same thing lol I have a 2018 f150 stx(if that even makes a difference lol)
@@BlueDragonCustoms Do you have the step inside your tailgate mate?
@@huracanfabrication I don’t think it does 🤔
did you have one of this tailgate storage for the 2013 f150?
Coming verrrry soon. probably within 6 weeks or so mate
@@huracanfabrication awesome, thanks
What about 1st Gen Nissan Titan ? Mine is a 2004... I'm about to try this on my own, but would prefer to have a professional one made... Please !!!
Hey mate no sorry we dont have one for that truck
@@huracanfabrication Ohh well. Thanks for the reply. I'll try it myself I guess, or find someone else. They look great though. Good luck
Will this fit the tailgate on a 03 Dodge Ram(?)
No sorry mate but will likely be doing one in 2021
@@rhysc375 - Would be really cool/useful if the bottom half of the storage unit could be molded from abs or hdpe, which might not only allow for more useable (wider/deeper) storage capacity but this might also help reduce fabrication time and/or shipping weight (...just some design thoughts:)
All the best to you & Huracan Fabrication in 2021!
We have looked into plastic injection molded tubs but the tooling cost is astronomical and we would need a new mold for each design :-(
@@huracanfabrication - Hmm... have you looked into all 3D printing options/technologies(?) Industrial 3D printing might make more sense over injection molding(?)
2022+ Nissan frontier??
Yes we do, please contact us on our website for a quote
I need one for a 17 ram 2500
i want one for a 99 chevy silverado. where and how do i get one.
Same here!!! Those trucks last forever and there's a million of them still on the road. I'd love to have one for my 99 Chevy!
We havent done one for the 99 Silverado. Contact us on Facebook and we can look into how suitable it will be to make a storage unit :-)
Hey guys, any chance there is a suitable model for the 2021 SR5 HiLux?
Yes there is
huracanfabrication.com/products/hilux-tailgate
Will this have any affect on the tailgate camera and is there any hydraulic lift assist suitable to work in conjunction with this? Am soo badly wanting to buy 1 but am also wondering if they are water tight
could I fit this to a 2021 Tacoma?
No. however we are working on a kit.
@Huracan Fabrication I am interested in a tailgate storage for 2011 F350 FORD SUPERDUTY
We are working on a model for this tailgate mate. its still a couple months away though
ชุดนี้หาซื้อได้ที่ไหนครับ
Do you make them for Isuzu Dmax 2022?
Sure do mate huracanfabrication.com/products/izuzu-dmax-tailgate-storage
Does this fit a 2002 flairside ranger ?
No sorry mate it doesnt
Will this work with a USA Ranger?
Not yet, but we are working on adapting it. Hopefully should be ready by early 2021
Awesome! I would be interested in being a tester if you are making one!
+1 to this!!!
Plz papa
How water proof is it
If you dont have a cover or canopy a dust/water seal can be easily added in to suit your needs.
Any plans for a Jeep Gladiator box?
We will likely do one later this year
@@huracanfabrication rock n roll! Can't wait to see that. Thanks for the super fast reply!
What truck do you have them for?
A wide range, checkout our website www.huracanfabrication.com
What is the price for one for 2021 Ford ranger? I couldn’t find a price for it on your website.
@@kennydendy5903 $595 delivered, USA models coming soon
Ok thank you
Can you do a install for the np300s please if they're pretty much the same don't worry just let me know please
Sure mate we already do one. Please see attached
huracanfabrication.com/products/d23-navara-tailgate-storage
@@huracanfabrication cheers mate sorry couldn't find it
@@huracanfabrication I mean a install video 📹 haha sorry man
Do you have any of these for an F150?
We do mate please see below
hfabusa.com/collections/ford/products/ford-f150-tailgate-storage
2013 Chevy silverado 1500?
No et mate but we are planning on expanding our range significantly this year :-)
i like your product but i dont know yet whos can install for me that
Hey mate, its a fairly straight forward DIY fit, but if you are unsure you can take it to any local panel shop and they will be able to do the install for you
thank you to your advise i will find a shop then i will order that
What year Ranger?
Any PX Ranger
Do you ship overseas
Yes we ship world-wide
hilux ??? Please
Which Hilux mate? year an trim level please
@@huracanfabrication 2019 SR5 Thank you
Will you ever be shipping to the United States?
yes we already ship to the USA via our website www.hfabusa.com
How can we make a tailgate cost 3000 dollars?
????
Flip flops? Really?
Straya mate, they're thongs!
they're safety boots in oz :p
It’s a great storage addition, but a shit instruction video.