Free Energy Overunity Generator Leon Raoul Hatem Degravitation Magnetmotor Magnetic Cogging
HTML-код
- Опубликовано: 19 окт 2024
- In this experiment I have rebuilt the Hatem generator by Leon Raoul Hatem. These are 4x 400 volt 0.75 KW asynchronous motors, 2 poles with a speed of 2840 RPM. 3 of these rotors were equipped with neodymium magnets to serve as a generator. Included was a frequency converter to start the unit slowly and also to allow a higher speed for measurements.
Then magnet discs with outer diameters of 175mm (magnets protrude) and 230mm (magnets are recessed here) were built from screen printing plates (thickness in total approx. 80mm). There are 12 magnets per row at a distance of 30 degrees. The rows themselves are offset by 10 degrees. The magnets are ring magnets with N45 countersink with a diameter of 25mm and a height of 7mm each (total height 14mm, as 2 magnets are always used per hole). The polarity is always the same for each disc, but always alternates for each motor/generator. This means that the disc of the drive motor always has its south pole facing outwards. The disc of generator 1, on the other hand, always faces completely north on the outside (etc.). So to speak, the discs always attract each other.
The performance measurements have shown that Leon Raoul Hatem is a fraud, the device always consumes more power than it actually produces.
His statetment that the braking by attraction of the magnets would be cancelled out by the high speed of 3000 to 3500 revolutions is simply wrong.
Further tests were then made (as seen in the video) and a thin magnetic plate was installed between the discs (where they diverge again).
In each case once so that the plate is repelled by the magnetic discs and once in attraction. The results can also be found in the video, but you can say that the drive motor consumes about 100 watts more with such an intermediate plate, so the plate brakes.
The same was also tried with a plate made of pyrolytic graphite and a plate made of bismuth. Unfortunately, the measurement results are exactly the same as if nothing at all were installed.
In diesem Versuch habe ich den Hatem Generator von Leon Raoul Hatem nachgebaut. Es handelt sich hierbei um 4x 400 Volt 0,75 KW Asynchronmotoren, 2 polig mit einer Drehzahl von 2840 RPM. 3 dieser Rotoren wurden mit Neodymmagneten ausgestatten, damit diese als Generator dienen. Inklusive einem Frequenzumrichter um die Einheit langsam anfahren zu können und auch eine höhere Drehzahl für Messungen zu ermöglichen.
Danach wurden Magnetscheiben mit Außendurchmesser 175mm (Magnete stehen ab) und 230mm (Magnete sind hier versenkt) aus Siebdruckplatten gebaut (Dicke insgesamt ca. 80mm). Es sind jeweils 12 Magnete pro Reihe im Abstand von 30 Grad verbaut. Die Reihen selber sind jeweils um 10 Grad versetzt. Bei den Magneten handelt es sich um Ringmagnete mit Senkung N45 mit Durchmesser 25mm, Höhe jeweils 7mm (Gesamthöhe 14mm, da immer 2 Magnete pro Loch verbaut wurden) Die Polarität ist pro Scheibe immer gleich, aber pro Motor/Generator immer abwechselnd. Das heißt die Scheibe des Antriebsmotors ist nach Außen immer mit Südpol gerichtet. Scheibe von Generator 1 dagegen ist außen immer komplett mit Nordpol gerichtet (usw). Sozusagen das sich die Scheiben gegenseitig immer anziehen.
Die Leistungsmessungen haben ergeben das Leon Raoul Hatem ein Betrüger ist, das Gerät verbraucht immer mehr Leistung, als es tatsächlich bringt.
Seine Behauptungen die Bremsung durch Anziehung der Magnete würde sich durch die hohe Drehzahl von 3000 bis 3500 Umdrehungen aufheben ist schlichtweg falsch.
Es wurden dann noch weitere Versuche gemacht (wie im Video zu sehen) und eine dünne Magnetplatte zwischen den Scheiben (wo sie wieder auseinander laufen) eingebaut.
Jeweils einmal damit die Platte von den Magnetscheiben abgestoßen wird und einmal in Anziehung. Die Ergebnisse sind ebenso im Video zu finden, man kann jedoch pauschal sagen das der Antriebsmotor mit so einer Zwischenplatte gleich ca. 100 Watt mehr verbraucht, die Platte bremst also.
Das gleiche wurde auch probiert mit einer Platte aus pyrolytischem Graphit sowie einer Platte aus Bismuth. Leider sind hier die Messergebnisse genau die selben wie wenn man gar nichts einbauen würde.
![OhGeesy x Lefty Gunplay - What It Iz [Official Music Video]](http://i.ytimg.com/vi/L0yzW9t2ixk/mqdefault.jpg)
Danke du hast mir Geld, Mühe und Zeit erspart.
Magnetgenerator:
ruclips.net/video/DHkz-aGLP-w/видео.html
This is first time I see a true demonstration, using correct way of measuring the totals. I appreciate those efforts to test real science and not speculations.
P.ease do more of thse with other "free energy" systems.
fake science you mean. lol . this is fake.. and you fell for it.. hahahaha.
Didn't you notice how fast it slowed down
@@PerpetualMan22
"Didn't you notice how fast it slowed down"
1) It didn't seem to slow down that fast to me, but let's say it did; why would you be surprised that a system with a load on it, slows down quickly?
The load would act as a brake and bring it to a stop even if you claim there's a flywheel affect due to the mass within the wooden discs.
2) The video is not claiming that the device works, the video is stating very clearly that it does not work, therefore do not bother doing the experiment.
Every day someone breaking thermodynamics rules! haha
He didn't break thermodynamic rules.
Read the last few frames of the video.
The experimenter clearly states that the experiment shows that the device does not produce free energy.
Hast du perfekt gemacht , danke dir 👍
Hello Anton - Did you try making output measurments at different speeds ? - There was an American company that built something on the same principle but had only one generator - They tested their efficiencies at two labs and both labs came up with almost identicle results - What they found is that excess power was only generated at certain speeds - Two graphs overlaid showed excess at periodic intervals over the speed range - For example, it could look something like : first spike near 2 rev per second : second spike just under 10 rps : third spike about 19.8 rps - The specific numbers are probably a result of exact build - I believe that if the magnets are too strong that the magnetic link becomes too strong and behaves more like a mechanical link - Have you looked at these other speed ranges, maybe under load also ? - I have more information on the company plus the graphs from the Independent labs, but I have to dig it up, are you interested ? - If Hatem ever got positive results, he might not have had the presence of mind to realize why - I have found now, three seperate instances of discovery of magnetic wheel linking, all claiming overunity
Hi,
we tested the results at 50 Hz (frequency converter), which corresponds to 2840RPM according to the motor nameplate
Alternatively, we tested the complete measurement at 60 Hz (frequency converter), which corresponds to 3408RPM according to the motor type plate.
These measurement results can be found in the video.(Power loss per generator to drive it)
If you can send me more information that would be great. I am very interested in clearing up the subject.
However, changing the speed is problematic because I need a certain speed range so that 220-230 volt alternating current comes out of the generators.
Hallo,
wir haben die Ergebnisse bei 50 Hz (Frequenzumrichter) getestet, das entspricht laut Motortypenschild 2840 Umdrehungen pro Minute.
Alternativ haben wir die komplette Messung noch bei 60 Hz (Frequenzumrichter) getestet, das entspricht laut Motortypenschild 3408 Umdrehungen pro Minute.
Diese Messergebnisse sind in einer Tabelle im Video zu finden. (Verlustleistung je Generator um ihn anzutreiben)
Wenn Sie mir weitere Informationen zukommen lassen könnten, wäre das großartig. Wir sind sehr daran interessiert, das Thema aufzuklären.
Allerdings ist das Ändern der Drehzahl problematisch, da wir einen gewissen Drehzahlbereich benötigen, damit 220-230 Volt Wechselstrom aus den Generatoren kommen.
Good line of thought, what if you distanced the mag just far enough to eliminate friction?also, all these ideas i have along the line of energy transfer and amplification involve gears, and perhaps flywheels. I think this almost has merit but will need speed and some type of transfer case to clutch between the drive and output so as not to slow it down, like the conundrum of less parts and more at the same time. Problems are meant to be solved. good post dude
@@NikkiTripPS I think that if the Hatem machine works, it is because the generator wheels are allowed to have some slack, due to a magnetic connection, instead of a solid gear or pulley connection - Fluctuation differences in load during use would put the magnets in temporary slight misalignments but the magnets would realign back into synchronization without inputing extra power - It may not seem intuitive but I think this is where the extra power comes from - I don't think the Hatem setup was the most efficient possible configuration - Some information has disappeared off the 'net in the last few years but everything was pointing to irregular loads causing overunity to appear
@@mikehoman7351 I see, having never conducted the experiment myself, I didn't see how it could be effective with the constant attractive force having to be overpowered.
@@NikkiTripPS I see what you are saying - So whatever the developers did to get extra power, they would have to make it efficient enough to overcome the magnetic drag that you mentioned before
All works good when it's set up properly.
Heavy wheel will help
No it doesn't.
Where’s your’s? Why aren’t you famous?
Is the experiment in the beginning yours? Where is that footage from??
Sure. Maybe, maybe.
If someone invent , he would be a milestone to different galaxy.
I am ready to carry out the electricity generation project with angular resonance together with investors who agree to make an official protocol. I have worked for 15 years for this project. After the official signatures are signed, everything will be done openly.
Interesting, Shame it doesn't work, thank you for the honest info on it though.
Do you operate the motor or operate the circular magnets connected to the electricity through which the electricity is produced?
Can you try different flywheel sizes to try and gear it up
Did you show your work to Leon Hatem ?
Looks impressive
on my channel the real gravity engine
3:00 V Gate concept. Helps add free torque
How much energy do u need for makeing a magnet??
Respeito seu posicionamento diante deste teste simples apresentado! De fato existem limitações. Mas a formula como se construiu pode ser a causa de limitações, assim como de potencial plausível, mesmo que sejam melhoradas as técnicas de construção, como da aplicação de capacitores e ou motor magnético simultaneamente, por exemplo. Não considero conveniente fazer uso de motores com suas bobinas convencionais ou com alterações sutis como sendo o melhor caminho em busca de potencial. Acho que todos deveriam atentar por buscar alta potência a partir de bitolas consideráveis dos fios de suas bobinas, geração de potencial de energia e frequência (relativamente elevadas), assim como também experimentar transformadores de potencialização e separação de circuitos, como também aplicações de capacitores, como citei acima. Acredito que devemos ter maior consideração da aplicação de motores 100% magnéticos como potencia principal aos geradores. Assim como podemos considerar aplicações de fontes elétricas alternativas, como uso de motor a combustão que tenha seu próprio hidrogênio sendo gerado para sua combustão, placa solar, fonte eólica, pequena fonte hidrelétrica, marítima ou outras e construir um sistema agrupado ou cooperativo, onde um misto de fontes se completam entregando potencial máximo.
For a few dollars more it would be better to replace the crank with an antique wind-up type mechanism that lasts at least an hour. Anyway congratulations!
Make 3 bi-toriodal transformers, one for each generator.
Now let's see if you get out more than you put in 😉👍🏼
Sounds stupid.
There used to be a car with a magnetic transmission how many amps at 220v will it put out under load
احسنت صنعا انت رجل رائع جدا
Hi Anton, thank you for the video, why do we just use cogwheel instead of magnets? is there any difference? thank you
That's the design by the old crook Leon Raoul Hatem. He claimed overunity, which some people inspired to try to reproduce his rather simple setup. With predictable success :)
@@reeferbeleafer9912
That depends on what you mean by "successful replication". Hatem himself didn't provide any measurements of input and output of his contraption, so it's unlikely that it worked as proposed.
@@reeferbeleafer9912
We use "predictable success" in German for the exact opposite. It's just sarcasm.
@@reeferbeleafer9912
:-D
@@reeferbeleafer9912
I just looked up the phrase "..., with predictable success" in English literature, and it seems that it's also used in this sarcastic meaning. May be some more emoticons next time...
Impressionnant mr Hatem ....son analyse sur les aimants et la degravitation....savoir si en charge le débit des alternateurs ne chutent pas ...très bon souvenir de mon passage dans votre maison...
Wenn es so funktioniert, kannst du ja die Schaltung einfach vom Netz nehmen und sie sollte selbständig weiter laufen? 🙂
Beste Ergebnisse erreicht man in dem eine Resonanz gefunden wird. Dazu sind aber nicht mehrere Generatoren oder im Grunde auch gar keiner nötig. Mit Dauermagneten, egal welcher Anordnung kann eine Mehrleistung erreicht werden. Dazu müsstest du sie auf einer Seit "abschirmen" können...
Soy Adrián de Nicaragua electricista. Cuánto tiempo le dilata la la inercia con un consumo fuerte de 10 KVA permanente cuanto cuesta eso así agrosomodo
Is the rotation maintained by the electric motor or did it only give an impulse, and the movement is maintained by the magnets?
Did you hear how fast it was breaking and slowed down when the power was cut to the electric motors
Felicitari
Ist freie energie grundsätzlich unmöglich oder sind wir nur noch nicht so weit?
Kommt darauf an, was man darunter versteht, denn der Begriff wird ja absichtlich schwammig gehalten. Magnetmotoren sind prinzipiell unmöglich, aber kalte Fusion ist beispielsweise durchaus möglich, man weiß nur noch nicht, wie (und ob) man daraus Energie gewinnen kann.
Cfar eshte bashkimi i ftohte?
Why would you imagine this goofy thing would produce free energy?
I don't think he did it expecting it to produce free energy.
I think he did it to prove it doesn't work.
That's how some of these makers roll.
Robert Murray-Smith did a few videos on free energy working.
Then he revealed in the video, how he made it work.
Basically, he showed how using videography, a not so honest bloke can make it look like something is moving, when in fact, it is not.
So war das nicht gedacht
WOW 😃😃 Respekt
Great! I would like to replicate it! Do you give the information to do it?
Update: Too bad, doesn't work. I commented before finishing the whole video.
Why for heaven's sake would anybody try to replicate this?
Why did you even think it could work? 😂
Ich habe mir die Mühe gespart (und viel Geld und Arbeit)
Steal Plate is attraction force , then once past steal plates magnets repel
Hi, still working on this? I would like to add to the idea if possible
Try using a Regenx coil from Thane Heins!
très bon travail good job 👍👍👍
nice
Ok felicitări
Increible...
Gut geht das oder bringt das
Hast du dir das Video überhaupt angesehen?
@@EliteFinanceInsights ja habe ich habe aber keinerl was gesehen über Messwerte und so interessant ist das auf jeden fall interessant für mich
Yes👍 ⚡💡
How much?
Felicitaciones muy buen experimento de verdad 👍 .
Pero? 🤔.
Hay un pequeño inconveniente,
que es el ruido ambiental es terrible
😖😖😖.
Si lo llevamos a gran escala. Y por un largo de tiempo el ruido puede ser molesto.
Si realmente es sobre unidad, para mí, sería el menor de los problemas.
What do you mean free? You stole the energy from your neighbor outlet and than you multiply it ?
Excelente
Poco a poco....se llega lejos!!
Werry good
je veux me former réel par rapport à ces choses là car je suis passionnée vraiment
와우!
Need a mill to nake holes exact for balanced force
You miss something...
i did also experiment on this sytem comming with some conclusion... the first 3 machine are bound together as generator... in you set up only the 4 generator can be seen as 100% magnetic drived because he is not linked by any other forces to the first machine (Gen) i suggest you to restart your experiment with at least 7 generator and isolate the first 3 machine (1 motor and 2 generator) as the driver so you will see what happen to your result.
😂 Maybe i am aslo wrong though... but i doubt
❤
磁石で動力伝達する効率を測定しているに過ぎない
👽Sure
ชอบครับ
just a wild idea here: what if instead the magnets are aligned or set to attract each other, what if done in opposite, reppeled each other!! I believe there will be something here anyone???
Toothless gear drives Good deal
Any can work if you modify it properly. The water in your apartment with open door will not stay, but in pool stays.
So, same as "what you eat, that you are", ... respectively "what you create, that will be".
-------------- ie -------------------
You need to know how wires to be, when you create coils, because every millimeter distance +/- among each plays role.
Even with those stupid concept motors, (I calculated by memory and in 2 seconds), by rewinding with the same wires "other concept" you would get around 2kw at least per 1, x3 = 6kw (I say at least, depends on the magnets used and rpm, and of course the most "their positions". up to 10kw each - because is not axial with much more combinations).
Ie. you could use only the magnets from the one motor to create motor only from the magnets without any wires, that means motor and power the others (that's very easy).
ie. you could use 1 truck or bus alternator and you would get 36-48V 140-200A from only one.
So ... == we don't know what combination been in those inside "generators" of that concept.
-----------
Free energy is becoming pandemic same as "big bang", while there is excess of energy. (and excess of big bangs)
Have good day Anton.
Hw to buy it
We need to buy that's machine
Why? Its bullshit🤣
@@EliteFinanceInsights no, i test it this is not bullshit
@@mirorr5698 Please do not spread such nonsense, this setup cost a lot of money and the measurements were always negative. The more generators you mount, the greater the loss. It is not an overunity tool and this garbage will never hold itself, because Hatem is a fraud and puts lies into the world. Anyone who replicates this will fail as it simply does not work.
so, I do not see extra energy production.
تحية من العراق
Can I order your generator? How much?
3000 USD
Yes, 2000 Euro for all include mesuring devices.
Super generator.
Magnet. Motors. Are. Conservative. Systems. And. Cannot. Produce. Energy. From. Scratch. Full. Stop.
Of course
I want the same device, what is the price, and what is the phone number?
Quanto custa um gerador deste.
Question
How do you fool the mases
Answer
Watch this video
Mr T has a word for the creator of this Vid
If this really worked you'd be a millionaire selling a product. What you need is to pass a high school level class in physics.
Billionaire? The wealthiest person in history most likely. I’m betting he’s got some elaborate excuse about shadowy agents or, my favorite, he’s not greedy he doesn’t want money.
Follow up. If you watch all the way to the end he explains and shows how it doesn’t work.
Не смешно, скорее глупо.
😅😅😅😅😅😅😅👍
Don't follow invitations for total brain washing.
A simple replica of the hatem generator including proof: ruclips.net/video/9JkREsSFwLA/видео.html
The result is always the same, energy loss instead of energy gain
Ein einfacher Nachbau des Hatem Generatos. Das Resultat ist immer das selbe, Energieverlust anstatt Energiegewinn
⚠️ Over unity requires external poser, hence your power lines that go off camera. Simply loop the output back to the source. Use external power to jumpstart it, then remove all external power. Poorly made video. Text goes by wayyy to fast, text obscures image.
Those cheap consumer power plug-in power meters are notoriously inaccurate when measuring power that is not sinusoidal, not at the prescribed frequency, or not at 0 phase angle. Errors of 20% or more are possible, and I have seen bigger errors on the best devices available here in the USA. A more elaborate measurement scheme would be more convincing. Many have attempted this setup, most notably John Searle, but they've never held up to 3rd party evaluation. The desire to succeed at overunity devices blinds most experimenters to the errors in their measurements. It is a common flaw across the overunity experimenters population. A truly interesting experiment would be to loop the generators to drive the propulsion motor, AND make light bulbs bright. But with 3 out of phase generators, that seems nearly impossible in this configuration. Good luck. Please practice good science, not self-fulfilling prophecy.
Phase relationship
Parajeral enerjia con imanes sedeben fabricar los imanes deacuerdo con esejiro y conladinamica dejiral aladerecha o ikierda
Muje Lena hai
这是磁齿轮，我做过的，效率只有33%。
wrong
that is not perpetual and not powerful
0:39 Where is free energy?
nowhere in this universe
this is NOT Hatems original design
you need to do your homework more thouroughly !
The original was fake, so it's a waste of time.
จะติดต่อสอบถามมีเบอร์โทรไหมครับ
Lol da hat jemand noch nie was von Reibung in der Physik gehört hahaha
Lock him up!
Another proof from a French forum. Simply translate from French to English with Google Translator: www.econologie.com/forums/inventions-innovations/prototype-machine-de-hatem-photos-et-explications-t4375.html
Ein weiterer Beweis aus einem französischen Forum. Einfach mit Google Translator von Französisch auf Deutsch übersetzen lassen: www.econologie.com/forums/inventions-innovations/prototype-machine-de-hatem-photos-et-explications-t4375.html
@mike homan Hi, you can upload the picture here de.imgbb.com/ and then post the download link here in youtube
Alternatively, you can upload the image to Google Drive or Instagram and post the link here or post the link in your youtube channel description
@@mikehoman7351 I only see "bicameral---juno.com" in your description
@@mikehoman7351 You can send the picture to this mail freeenergy@muellmail.com
@@mikehoman7351 Yes
You could set that up to keep spinning when you shut the power off the first one. I can't give the technology out till mankind gives up greed but your closer then even tesla. It does have to do with 3 6 9. But I bet you can figure it out. It's hard to accomplish where the price on survival is so high
@@darklight2.1 your wrong. But it's OK. I wouldn't expect you to know. They don't teach it in school
@@darklight2.1 I think some sort of vanadium dioxide wires / batteries / connectors / everything in the mix might help a bit more as it conducts electricity without heating up 🤷🏻♂️
@@darklight2.1 hi paid agent
‘Until mankind fives up greed” lol. Wow, lamest excuse in the history of free energy scam artists. You know you are a liar….we know you are a liar. What do you possibly get out of the lie though?
@@davidgill3356 😂
A perpetuum mobile does not exist
Same as the earth does not exist :') Why?
Because definition includes "...without or no energy same no power to start the process..."
Hätte ich dir auch sagen können, funktionierte bei mir auch nicht
Und genau deshalb hab ich dieses Video gemacht. Um Andere davon abzuhalten diesen Schwachsinn nachzubauen. Schade um die Zeit und das Geld. Im Kanal beschäftigen wir uns derzeit mit dem Lülingmotor. Mal sehen ob da etwas brauchbares rauskommt.
Wo bist den her? OB ?
Cekal jsem vybuch a tu nic ,doslova.
Очень даже гут
Too noisy to much equipment
Mdr le gars ne donne aucune mesure c’est facile de dénigrer sans apporter de preuves
Use 20 kHz
It's noisy
make battery better
Magnetheizung:
ruclips.net/video/nLu6XKUAD9Y/видео.html
Não tem almoço de graça!
This is not a faithful replica of Leon Raoul's device. You did not use identical magnets (His were smaller and weaker). You did not drive it to over 4000 rpm. You did not use interlaced polarization, which logically imposes itself.
Therefore, the claim that Leon Raoul Hatem is a fraud is too far-reaching a conclusion.
A correct test should consist of gradually accelerating the wheels without connecting a load, while recording the data: rpm and power consumption. From zero to 5 thousand rpm. Probably you would notice moments when resistance and power consumption increase and the rpm decrease, and conversely resistance weakens and the rpm increases spontaneously. This is due to a phenomenon discovered and initially described by Howard Johnson, which he called magnetic shot. The time parameters of the magnetic shot depend on the type of magnet, its size, speed of movement. So there are thousands of combinations. I have already suggested a lot, some of it I determined myself and most of it is available knowledge. Howard Johnson spent many years of his life studying this phenomenon,
🤣
Herr Anton Maier bauen sie dass nach;
ruclips.net/video/Mr_rjQMqrEw/видео.html&t
Hi, mit Strom aus Wasser Wasserstoff zu erzeugen (Elektrolyse) und diesen dann in einem Verbrennungsmotor einzuspritzen, so dass dieser läuft ist kein Hexenwerk. Die Frage ist, wie schafft man es über einen Wirkungsgrad von 100% zu kommen?
@@EliteFinanceInsights Wirkungsgrad 20% rest verpufft als Wärme, aber dass ist egal,
ist ja ein Verbrennungsmotor.
Beim Öl ist es ja auch egal,
und hier wird Wasser nachgefüllt was als Dampf aus dem Ausbuff entweicht.
Und? Das kommt ja noch aus dem Hahnen.
@@amongus1707 Es geht hier darum das für die Erzeugung von Wasserstoff Energie benötigt wird. Wo kommt diese Energie her? Der Wirkungsgrad bei der Erzeugung von Wasserstoff liegt irgendwo bei bis zu 90%. Das heißt es fehlen 10%. Wo kommen die her?
@@EliteFinanceInsights Er hat eine 20Amper wiederstand im Kabel.
20x12v=ca 240watt fliesen
von der Autobatterie in die Elektolyse.
Sonst wäre die Batterie ja Kurzgeschlossen.
Der Motor dreht den Generator der ca 3000watt erzeugt, davon wird die Autobaterie dann geladen.
Hier kann mann nicht so vergleichen weil
da zwei Eigenschaften ungleich zusammen Spielen=Elektrolyse die durch Metallplatten und Salz verstärkt wird und dann der andere Process der Verbrennung.
Da gibt es mit dieser Methode Gasbrenner,
die 600watt in die Elektolyse stecken,
aber die Flamme kann Steine verschmelzen(hell wie die Sonne/gleiches Lichtspektrum) und bis 3000grad.
Ich werde es Nachbauen.
Wasser ist ein Generalschlüssel.
Und Deutschlands Automobil Industrie geht zugrunde,
dass wäre die Lösung.
Heizen,Warmwasser und Mobilität nur mit Wasser.
Die E-Mobile wären sofort Geschichte, die Asiaten auf dem falschen Hype aufgesprungen,
und Europa unabhängig und im Element ihrer Autoindustrie für immer gerettet.
Es wird Widerstand geben, aber wass wollen Sie machen wenn Wir es selbst Nachbauen und jeder es dann sieht?
Dann muss es kommen und kann nicht mehr Unterdrückt werden.
www.youtube.com/watch?v
Ble, ble, ble . there is no useful energy . Toy