Thanks for doing an ASMR, No-music video. I can't stand hearing the same youtube lofi background music when I watch PC builds. This is really relaxing and chill.
You need to to apply firm pressure at both ends of the ram to get it to lock into place. You really looked like you barely put much pressure on the ram , plus you were only pushing on one end. Otherwise i think you did a great job building in the case. The best part you picked was using a PSU with individually sleeved cables as these are way more forgiving and flexible for cable management. i did a build with this case for another person and had to use a PSU with very stiff flat plasticky cables and they were a nightmare to route.
Ah yes okay i thought it was best to go 1 end then the other. Will do both ends next time! Where i'm from, we don't have as many PSU options so usually the ones we get are of better quality but yeah can imagine working with super stiff cables, it would be a nightmare!
Also while inserting ram, the same thing actually happened to me. You have to push the RAM in the DIMM slot hard. And you could have chosen the RX 6600 and have the same performance as the RTX 3060 with just a fraction of the cost.
The MOBO was creaky so much i was too afraid :D. My choice was based on Gaming + Editing and Nvidia drivers are more stable and outperforms AMDs when it comes to softwares like Davinci Resolve. If solely just gaming then yeah, RX6600 would have been the way to go!
Great video, but there is only 1 variant of the 3060, and it comes with 12gb of vram. The 3060 ti on the other hand, has the 8gbs. Also, how do you only have 165 subs? this is good content
Tried doing that but the ram somehow just didnt want to go in so i had to slowly push each ends down one by one. Will try doing so again in my future build!
Btw you don't really need to put on the bottom dust filter if you don't plan adding a bottom fan, for slightly better temperatures. Great build nonetheless!
Oh yes that's true but i'd rather just leave them on so that i don't lose it. Temps are pretty low anyway since its just a 12400 and 3060. Thanks for watching! :D
Can i use a 13400F in this motherboard and i have a question Is this motherboard reliable? Because i haven't seen asrock selling much amount of motherboards in my country most pc shops use Gigabyte or Asus ones but the cheapest mini itx mother board i could find is Asrock B660M which has similar proce to Gigabyte B760M DS3 AH DDR4 motherboard and should i go for it or not ?
If it’s similar price then go for the gigabyte. The ASRock board can only take about 100w from the CPU which would affect your future upgrade path. The only reason I got it in the first place was because this was SGD$100 cheaper than the next motherboard I could find.
@@civlav but i cant use that B760 (or can I because i dont know if i would be able to fit it properly or not ) in the cooler master nr200P as it is M-ATX I would be using 280mm aio + 2 fan GPU with it with 850W sfx psu (because i am going for max version of the case)
Hello, I really admire your setup and I'd like to create something similar. However, I've purchased a 7700XT with a length of 313 mm. Could you please tell me the length of your GPU? would the 313 mm GPU fit in the NR200P? Thank you for your assistance.
Glad I got recommended this video/ your channel, I am also very into both Lego and pc's AND also have an nr200p build (5600x x RX6800xt). Its a great case because you can actually go very high end without having to worry to much about thermals!
That’s cool to hear! But tbh, I might veer away from Legos cause it’s taking too much space at home. The whole filming and editing is pretty tedious as well it takes away my fun of building them 😅 But every now and then I might make content on them! Yes it has great airflow and it’s such a beginner friendly case! Really have 0 worries about thermals. Thanks for your comment and thanks for watching! :D
no hate or anything but that motherboard will not last that long its what they use for prebuilts and if you are gaming/video editing/ streaming later down the line i suggest getting 32gb of ram it will help alot
Since im looking to do content creation, iGPU helps quite a bit when using Davinci Resolve Studio (although am still using the free version currently). Its also nice to have a backup in case the dedicated GPU fails!
Not sure what kind of content you will be producing in the future but I enjoyed this one. The cable management speedrun is hilarious and satisfying. 🤣 Keep making pc build content and you'll be one of the next major tech RUclipsrs in the future generation.
Thanks for those kind words, means a lot! :D I’m not too sure myself either but tech would definitely be the main bulk of it. Currently producing a video to be up within a week. Stay tuned! :)
I’m from Singapore and this cost me SGD$1300 which would be about USD$950. Parts here usually cost slightly higher. If you’re planning on building something similar, I recommend choosing a different motherboard :)
@@alternatestrings then what is a 3070 , high range? , 3080 mega range? and 3090 ultra range? xD same for 12600 , 12700 and 12900 not even counting the 13th serie intel and 4000 serie rtx it has always been that the 60 serie is low range , 70 serie is mid range and 80 serie as high range with 90 serie being added for people with too much money i have a 13600k and a 4070 , that is a mid range build , how can a 3060 12400 also be mid range ?
You’re not wrong tbh. Wanted to class this as low range but wiki placed the 12GB variant of the RTX 3060 as mid range. Maybe I should change it to super budget mid range :D
Thanks for doing an ASMR, No-music video. I can't stand hearing the same youtube lofi background music when I watch PC builds. This is really relaxing and chill.
I was actually wondering if the video was too “plain” without some background music. Thanks for your comment and for watching the video!
Nice build bro, cool edit too. Cheers👍🏾
Thanks bro! :D
the production quality in this is amazing, this guy will go far
Thanks for your kind comment! Still got much to improve on xD
This is a very nice build, love the choices of specs for the budget.
Glad you like it!
First time builder going sffpc. ONE OF US
Been obsessed with SFF after coming across Optimum Tech several years ago! Already thinking about my next case :D
I suggest you make a playlist for your upload, cause all of them is so relaxing, I'll loop it for my lullaby
Already have a playlist for my ASMR tech builds! ruclips.net/p/PLedw8XPGHPZOdJceNAOS9lWywlOKPBblK
Nice build and great video!!! :)
Glad you like it!
You need to to apply firm pressure at both ends of the ram to get it to lock into place. You really looked like you barely put much pressure on the ram , plus you were only pushing on one end. Otherwise i think you did a great job building in the case. The best part you picked was using a PSU with individually sleeved cables as these are way more forgiving and flexible for cable management. i did a build with this case for another person and had to use a PSU with very stiff flat plasticky cables and they were a nightmare to route.
Ah yes okay i thought it was best to go 1 end then the other. Will do both ends next time! Where i'm from, we don't have as many PSU options so usually the ones we get are of better quality but yeah can imagine working with super stiff cables, it would be a nightmare!
What an amazing video, definitely thought you have at least 10k subs. Keep up that great work!
Thanks it means a lot! Hopefully i can get there one day :D
Underrated channel ❤
Also while inserting ram, the same thing actually happened to me. You have to push the RAM in the DIMM slot hard. And you could have chosen the RX 6600 and have the same performance as the RTX 3060 with just a fraction of the cost.
The MOBO was creaky so much i was too afraid :D. My choice was based on Gaming + Editing and Nvidia drivers are more stable and outperforms AMDs when it comes to softwares like Davinci Resolve. If solely just gaming then yeah, RX6600 would have been the way to go!
yeah rx 6600 is a killer for gaming but rtx 3060 is more like for everything. but it's overpriced af
Damn i love this kind of ASMR video
Glad you enjoyed it. Thanks for watching!
Nice construction and clip 📽️
Thank you!
Great video, but there is only 1 variant of the 3060, and it comes with 12gb of vram. The 3060 ti on the other hand, has the 8gbs. Also, how do you only have 165 subs? this is good content
The 3060 actually comes with an 8gb variant which was launched just a year ago.
Glad you enjoyed it! :)
hey, im planning to build in the nr200 as well very soon, do you have any tips?
For ram u need to apply equal pressure on both corners at the same time
Tried doing that but the ram somehow just didnt want to go in so i had to slowly push each ends down one by one. Will try doing so again in my future build!
Well done - a great video.😃😃
Glad you enjoyed it!
Btw you don't really need to put on the bottom dust filter if you don't plan adding a bottom fan, for slightly better temperatures. Great build nonetheless!
Oh yes that's true but i'd rather just leave them on so that i don't lose it. Temps are pretty low anyway since its just a 12400 and 3060. Thanks for watching! :D
Can i use a 13400F in this motherboard and i have a question
Is this motherboard reliable?
Because i haven't seen asrock selling much amount of motherboards in my country most pc shops use Gigabyte or Asus ones but the cheapest mini itx mother board i could find is Asrock B660M which has similar proce to Gigabyte B760M DS3 AH DDR4 motherboard and should i go for it or not ?
If it’s similar price then go for the gigabyte. The ASRock board can only take about 100w from the CPU which would affect your future upgrade path. The only reason I got it in the first place was because this was SGD$100 cheaper than the next motherboard I could find.
@@civlav but i cant use that B760 (or can I because i dont know if i would be able to fit it properly or not )
in the cooler master nr200P as it is M-ATX
I would be using 280mm aio + 2 fan GPU with it with 850W sfx psu (because i am going for max version of the case)
@@civlav or should i go for asus rog B760I but it is twice the cost than the B660 ITX of Asrock
And cheap out on cpu
Hello, I really admire your setup and I'd like to create something similar. However, I've purchased a 7700XT with a length of 313 mm. Could you please tell me the length of your GPU? would the 313 mm GPU fit in the NR200P? Thank you for your assistance.
Glad I got recommended this video/ your channel, I am also very into both Lego and pc's AND also have an nr200p build (5600x x RX6800xt). Its a great case because you can actually go very high end without having to worry to much about thermals!
That’s cool to hear! But tbh, I might veer away from Legos cause it’s taking too much space at home. The whole filming and editing is pretty tedious as well it takes away my fun of building them 😅 But every now and then I might make content on them!
Yes it has great airflow and it’s such a beginner friendly case! Really have 0 worries about thermals.
Thanks for your comment and thanks for watching! :D
@5n0w55 You said you used a 5600x, did you use a m-atx mobo or an itx?
Nice build, how did you set your camera up like that?
Thanks! I just used a cheap microphone boom arm and attached a phone clamp to it for this overhead shot
no hate or anything but that motherboard will not last that long its what they use for prebuilts
and if you are gaming/video editing/ streaming later down the line i suggest getting 32gb of ram it will help alot
Yeah i just changed it in my recent video! 32gb is my next upgrade ill be doing soon too :)
What about the temps mate?
Really² Nice Video! Keep it Up👍🏻🔥
Thanks, will do! :)
Non-F comes with iGPU but if you have a dedicated GPU, there is no need for iGPU because iGPU will only be used while idle. But still a great video!
Since im looking to do content creation, iGPU helps quite a bit when using Davinci Resolve Studio (although am still using the free version currently). Its also nice to have a backup in case the dedicated GPU fails!
sexy build i must say entry level or no keep it up mate
Thanks mate really appreciate it!
Not sure what kind of content you will be producing in the future but I enjoyed this one. The cable management speedrun is hilarious and satisfying. 🤣 Keep making pc build content and you'll be one of the next major tech RUclipsrs in the future generation.
Thanks for those kind words, means a lot! :D
I’m not too sure myself either but tech would definitely be the main bulk of it. Currently producing a video to be up within a week. Stay tuned! :)
How much it weighs?
1:57 That's what she said
🤣🤣
Nah bro, you can't ever get an overkill with PSUs, eventually you'll want to upgrade your GPU, and you'll be glad to have the extra headroom for it
You’re right. 1 month into having my PC and I’m already thinking of multiple upgrades xD
It does make some sense using the cdrom drive hhd drive spot for the psu. does it work?
Not sure which part you mean but I don't think that's possible. Only place would be where i mounted at with the ability to shift slightly higher.
@@civlavThe general area. right
@civlav What electric screw driver did you use?
Its from xiaomi. Links to it are in the description! :)
Bro, how i call my pc with i5-10th gtx 1660ti if you call your rtx is entry-level??
If that’s a recent build then I guess budget level? To me, entry-level is something you can get brand new 😅
This is what you call inexperienced? Hmmm kinda sus. The end product looks damn amazing.
It's amount of time I spent researching to make sure I get it right, and the power of editing of course!
You need Sata SSD for the 2nd drive. 😅😅😅😅😅😅
Yeah was thinking to get one in the future! But they are expensive :(
what"s the cost of this build?
I’m from Singapore and this cost me SGD$1300 which would be about USD$950. Parts here usually cost slightly higher. If you’re planning on building something similar, I recommend choosing a different motherboard :)
1:57
Cost???
Back when this was built, i'd say around USD$950 but im pretty sure you can build it at a cheaper price now
95 subscribers? let me fix that
Thank you kind sir :)
Seeing little hiccups here and there makes me feel much less self conscious about my pc building skills 😅
Nothing to feel conscious about. It's all part of the process! :)
aint mid range xD that low range
How's this a low range?
@@alternatestrings
then what is a 3070 , high range? , 3080 mega range? and 3090 ultra range? xD
same for 12600 , 12700 and 12900
not even counting the 13th serie intel
and 4000 serie rtx
it has always been that the 60 serie is low range , 70 serie is mid range and 80 serie as high range with 90 serie being added for people with too much money
i have a 13600k and a 4070 , that is a mid range build , how can a 3060 12400 also be mid range ?
You’re not wrong tbh. Wanted to class this as low range but wiki placed the 12GB variant of the RTX 3060 as mid range. Maybe I should change it to super budget mid range :D
@@civlav no disrespect to the build btw xD its very nice and you made a good video !!
Don’t worry, none taken! Thanks for watching :)