Well done ! I've watched a few thousand reviews on airguns and I can always tell when a new legend has arrived and you're it ! You have a new subscriber !
Please note: You don't want to lubricate these magazines with any oil or silicone spray. The red belt will absorb the lubricant and will "grow" causing it to skip over the gears. You won't be able to wind it or load it unless you clean the oil out and replace the red belt.
so my high capacity mag doesn't work to hot, my pellets tip over and cause a jam, I found some longer pellets that appear like they'll work better, but way more pricey considering you can send a 20 dollar tin down range in about 5 seconds lol
Great video! That table camera is super clean. Did anyone else catch the second bottle get the hell outta dodge before the full auto rain came it's way 😅? I'm loving my 33rnd mag as well. Expensive on ammo, but so worth the fun.
@@airpower7692 I apologize as FEED was the wrong term, I meant to look like a real steel magazine. Even airsoft guns all have magazines that fit kist like the real ones. I have the Hatsan Invader .25 cal and love it but hate the little plastic round mags.
@@mrgreenbudz37 Airsoft ammo are round balls which can be turned in any way, while pellets must be in a precise position. You can not align them one on each other like real steel cartridges made of brass, because the spring would deform the much too soft lead skirts. There is a solution in the Sig MCX or Virtus through belt fed magazines, but there you got a horrible trigger since it’s by trigger pull that you cycle the belt ! Of course, everything is possible and one could imagine that the semi/full auto action of the pcp could also activate some rod which cranks into the belt mechanism, but since it’s already difficult to make work reliably the sole semi auto action, it would be even much more subject to repeatedly jamming if it had to activate also the mag in plus !
they could just as easily as real steel go into magazines. You don't know what you are talking about but then again neither do most people online.@@Crottedenez1000
My 25 Blitz (gets here tomorrow!) shoots 1150 rpm at 10 cents a round. That is $115.00 a minute ($1.92 a second) in full auto. For comparison, my 270 Winchester is $2.25 a round, I go through 10 rounds ($45 box) per range day. It has a Witt Machine brake and the range is 100yrd indoor so I have to make an appointment for the range so nobody else is there and gets the side blast (pisses people off!), those opportunities are rare so if I'm lucky I'll go through $22.50 in ammo about once a month. The Blitz can be shot in my back yard and I'm setting a budget of 1000 rounds a month. Anybody know where I can get the stuff in 1000 round boxes? Airguns are not always cheaper but I'm here for the fun of it so line up the unholy cans.
Great video Roy! Hey, I have an important question, as a brand new Blitz owner, when decocking the blitz there is 2 positions you can leave it decocked as it wants to lay or decocked and push the bolt the last few centimeters forward, which way is correct?
I wanna buy this, but the reviews say it is always jams. Is this true? Also, the power is wack on the 30 cal. I'm trying to get something with at least 850 fps. Idk. Maybe I'll consider the 25 cal instead?
@@alexgarcia3900 I've only had a problem with a few magazines jamming not the gun having issues itself I made some adjustments with taking the magazine apart and put it back together and in some cases those magazines work fine and then a few that didn't plus there's a door there goes under the magazine how to make sure a set screw under their is adjusted right
Numbers can't be evil all Numbers do are mark how many of something and i don't believe in any religion cause it's not demonstrably evident and does more harm than good see just like i didn't get the like simply cause of a number that was fallaciously deemed as evil unless of course you have some good reasonable evidence to support that claim
Awesome to see that 30 going down range. Seems like hatsan did a better job with the 30 then the 22 . I ordered 3 extended 45 rounds direct from hatsan. All seem to have too much play with the 1st round and bends my pallet skirts from to much spring pressure. Does fly down range after the 1st few shots. Hopefully hatsan will do a better quality control on their magazine and belt
I've done work to this to get it how i like it and the first thing was to clean all that junk oil they have in it and put my own combo of oil and light grease mix and polishing sanding and deburring all the internals
@@huckleberry8864 my spring was so bent out of shape and low power these new parts gave me 62fpe the new hammer is thicker and little heavier not sure if all the new ones are like this or i got lucky
Howdy partner, hailing from south Florida. Do you have any experience replacing a Blitz 30 cal firing pin valves? Mine broke and hatsan just sent me another, buuuuuut I'm a little hesitant to start taking apart my blitz. I'm thinking it goes right behind the air tank threads? Nice videos bro, keep it up👍👍👍
I've a video on taking the rifle apart but I never did get the valve out of the tank I think you have to use heat to break it loose I couldn't get mine off
Hey bud! Yes, I think you may be correct. There's an authorized hatsan dealer who does repairs about an hour away so I'm going to take it to him. If he fixes it in front of me, I'll try to get a video or pictures for you so you have it moving forward. Thanks for the reply and be safe out there !
I had one break after about a month. I had another bottle on it. It broke in 2 days. I have another one on there now. It won't shoot in full auto. It shoots one shot, then makes a fart sound. I have to rack another round. Works fine in semi-auto.
My serious apologies for the lack of content honestly it's mostly weather-related but due to the fact that I don't have new products I can't really bring you anything new yet
@@airpower7692 Well maybe in the US. In my european country amazon does not even sell you an arrow let alone a mag for an air rifle ;) (But there are other shops that do ;) For everything that is not a soft air you have to order from a gun shop. And they also are only allowed to ship, Bows, Crossbows, Arrows and hunting tips + air rifles and ammo for them. For the rest you have to visit the store in personal :(
How many shots in full auto @ 50 yards from a full tank? It's a joke at 1 cart (that we didn't see you fill up) that you have to fill. Why not place Ballistic Precision @ 50 yards and 100 yards to really see fps at impact?
Because I can't afford to keep buying chronographs they will get shot at that distance it's not really practical. from a fulfill 250 bar I can run two magazines which is 32 rounds in the rifle will have 200 bar left in it I've done this in previous videos already
Turn it down pretty easy just loosen the back plate enough so it still fits the stock or you could buy the 177 caliber but you don't have to get it at all it's your choice
@@airpower7692 Thanks for your answer. Thats a really good idea (I saw this rifle today in another vid so i was very interessted in the energy) But if you can lower it i may give it a try :) Looks so much fun and as said if you can lower the FPE so it does not totally destroys my wooden fence and hurts a neighbour i maybe give it a try.
@@chrischrist4160 I've a video tear down in this and there's a bushing in front of the spring as well that if turned backwards will lower the fps also hope all this helps but as for s wooden fence i wouldn't want to shoot that way cause you need real low power like 8FPE i think the lowest you'll get the blitz in 30 cal is 45FPE not sure about the 177 cal I've never had one
@@airpower7692 No damage is not not the problem. If i miss my bullet catch so be it. (But my neighbour has a 4 years old kid) And i would NEVER EVER forgive myself if i miss the bullet catch and it makes it through the fence. But again damage to the fence, No problem i just want to make shure that there is no way it can go through.
@@airpower7692 Btw really thank you for your concern but the "fence" is 2 yards high and massive wood. So 30-45 Fpe will definitely damage it if i miss and hit the fence. But as long as there is no chance in this world that a bullet can make it trough i´,m fine.
Very bad things more than likely especially at the close distance in a home. I'll set up some hard wood targets with soft fruit behind them to show in a video soon for you
9 years in Army, last 3 as Drill Srg running rifle range, ammo does affect accuracy, but so does B.R.A.S.S. which you really dont practice from what I see in your video, finger placement on trigger, the squeeze affect your left to right, breath control up and down, I understand, pleanty I understand, you missed a big ass jug, multiple times, DO YOU UNDERSTAND?@@airpower7692
Haha..problem is its not reliable...at all..Even the hatsan usa website is from 1980,doesnt work have the time when you go to pay...I wanted to keep it but I didnt..If you need anything from them they will Not be thier..maybe like a month after they will send you a email...Im doing this so others will not be put through what ive just gone through.Do youreselves the favor and save up a bit longer and go with a differnt company all together...I wanted this gun so badly and they ruined the who,e experience..sent a non working gun with a bent barrell..you can see its bent just by looking... Reiculousd...
Well done ! I've watched a few thousand reviews on airguns and I can always tell when a new legend has arrived and you're it ! You have a new subscriber !
Thanks, I'm uploading a new video now i shoot the 44.75jsb out of the blitz and getting 771fps with the new heavier hammer in the gun
My c02 has a ar mag and if functions great in full and semi so ya air companies are just slacking on looks big time all are ugly as I've noticed
Please note: You don't want to lubricate these magazines with any oil or silicone spray. The red belt will absorb the lubricant and will "grow" causing it to skip over the gears. You won't be able to wind it or load it unless you clean the oil out and replace the red belt.
Maybe a dry lube such as Teflon spray would be a better alternative. Added benefit is that it doesn't gum up with dust.
Thanks for that tip.
@@chrisellingson123 Graphite powder might also be an option perhaps. It's very good for locks.
so my high capacity mag doesn't work to hot, my pellets tip over and cause a jam, I found some longer pellets that appear like they'll work better, but way more pricey considering you can send a 20 dollar tin down range in about 5 seconds lol
Great video! That table camera is super clean. Did anyone else catch the second bottle get the hell outta dodge before the full auto rain came it's way 😅? I'm loving my 33rnd mag as well. Expensive on ammo, but so worth the fun.
This guy is so from the woods, he went to look up his family tree, and found out most of them were still living in it.
We're all still apes are you trying to deny that evidently warranted fact
it has always reminded me of a crazy woodpecker - great lil video brother
Them 33 round mags are awesome!!! Great video!!!!
Have you tried any out yet I want to buy some but I want to make sure they're not going to hang up like the stock ones did
@@billyjones9045 ive had more success with the 33 rounders than the stock mags.
why can't any of these air gun manufacturers make a rifle mag that feeds like real steel? These mags just look so lame.
I don't understand what you mean feeds like real steel
@@airpower7692 I apologize as FEED was the wrong term, I meant to look like a real steel magazine. Even airsoft guns all have magazines that fit kist like the real ones. I have the Hatsan Invader .25 cal and love it but hate the little plastic round mags.
@@mrgreenbudz37 agree even the air pistols that shoot pellets have a release mag but i don't know why they do it this way
@@mrgreenbudz37 Airsoft ammo are round balls which can be turned in any way, while pellets must be in a precise position. You can not align them one on each other like real steel cartridges made of brass, because the spring would deform the much too soft lead skirts. There is a solution in the Sig MCX or Virtus through belt fed magazines, but there you got a horrible trigger since it’s by trigger pull that you cycle the belt ! Of course, everything is possible and one could imagine that the semi/full auto action of the pcp could also activate some rod which cranks into the belt mechanism, but since it’s already difficult to make work reliably the sole semi auto action, it would be even much more subject to repeatedly jamming if it had to activate also the mag in plus !
they could just as easily as real steel go into magazines. You don't know what you are talking about but then again neither do most people online.@@Crottedenez1000
You convinced me! I'm getting one. Probably buy The hatsan compressor as well.
I've the tuxin and love it
My 25 Blitz (gets here tomorrow!) shoots 1150 rpm at 10 cents a round.
That is $115.00 a minute ($1.92 a second) in full auto.
For comparison, my 270 Winchester is $2.25 a round, I go through 10 rounds ($45 box) per range day. It has a Witt Machine brake and the range is 100yrd indoor so I have to make an appointment for the range so nobody else is there and gets the side blast (pisses people off!), those opportunities are rare so if I'm lucky I'll go through $22.50 in ammo about once a month.
The Blitz can be shot in my back yard and I'm setting a budget of 1000 rounds a month. Anybody know where I can get the stuff in 1000 round boxes?
Airguns are not always cheaper but I'm here for the fun of it so line up the unholy cans.
$.10 a round??? 🥴
When yer from California like me, ya get desperate.
When they make an optional 100 round belt I will get one. Thats the only thing holding me back!
piss away a whole tin id love to see it 😂
Is the bottle even big enough for 100 shots ? Lol
I leave red dot scopes on for 1-2 days new battery to dim the bright ass dot covering 5' at 100y. Do a few before season and keep them.
I want one for home defense. Will it hold air and work if and when needed?
I've had this 4 years and still using it in videos so yes it's the answer you're looking for
Great video Roy! Hey, I have an important question, as a brand new Blitz owner, when decocking the blitz there is 2 positions you can leave it decocked as it wants to lay or decocked and push the bolt the last few centimeters forward, which way is correct?
I always close my bolt fully cause my bolt has silicone grease on it and it should keep the o-ring lube and not let it dry out or debris get on it
I wanna buy this, but the reviews say it is always jams. Is this true? Also, the power is wack on the 30 cal. I'm trying to get something with at least 850 fps. Idk. Maybe I'll consider the 25 cal instead?
@@alexgarcia3900 I've only had a problem with a few magazines jamming not the gun having issues itself I made some adjustments with taking the magazine apart and put it back together and in some cases those magazines work fine and then a few that didn't plus there's a door there goes under the magazine how to make sure a set screw under their is adjusted right
Great video but withdrew my 👍 because I landed on some evil numbers so I’ll hit it up later 😂
Numbers can't be evil all Numbers do are mark how many of something and i don't believe in any religion cause it's not demonstrably evident and does more harm than good see just like i didn't get the like simply cause of a number that was fallaciously deemed as evil unless of course you have some good reasonable evidence to support that claim
Awesome to see that 30 going down range. Seems like hatsan did a better job with the 30 then the 22 . I ordered 3 extended 45 rounds direct from hatsan. All seem to have too much play with the 1st round and bends my pallet skirts from to much spring pressure. Does fly down range after the 1st few shots. Hopefully hatsan will do a better quality control on their magazine and belt
I've done work to this to get it how i like it and the first thing was to clean all that junk oil they have in it and put my own combo of oil and light grease mix and polishing sanding and deburring all the internals
@@airpower7692 yea I'll have to clean my up too, put over a few thousand rounds in it does get pretty dirty
@@209rottweilers I'm talking about the inside components plus I have a new hammer and I knew hammer spring
@@airpower7692 I'm getting my blitz in a few days. Why did you have to change the hammer and spring?
@@huckleberry8864 my spring was so bent out of shape and low power these new parts gave me 62fpe the new hammer is thicker and little heavier not sure if all the new ones are like this or i got lucky
Git er done! Let’s rock and roll! ❤❤❤
Definitely NOT BACK YARD FRIENDLY AND IT WILL VOID THE WARRANTY IF YOU USE A MODERATOR
I've shot this uptown for a long time zero complaints
Awesome video on the Blitz 👍
Thanks I haven't uploaded any new videos in a while due to my night shift schedule it's been hard to do anything
Looking good Roy ! 👍
I want one but people say they are unreliable. Any one out there with good experience?
@@MichaelFiden yeah me. You can return detective one but sometime it's not the gun but the mags or the door under the mags
I don't know why somebody don't make a 30 caliber pellet pen.
Good to see you
Yo lil bro you got me !!!
Howdy partner, hailing from south Florida. Do you have any experience replacing a Blitz 30 cal firing pin valves? Mine broke and hatsan just sent me another, buuuuuut I'm a little hesitant to start taking apart my blitz. I'm thinking it goes right behind the air tank threads? Nice videos bro, keep it up👍👍👍
I've a video on taking the rifle apart but I never did get the valve out of the tank I think you have to use heat to break it loose I couldn't get mine off
Hey bud! Yes, I think you may be correct. There's an authorized hatsan dealer who does repairs about an hour away so I'm going to take it to him. If he fixes it in front of me, I'll try to get a video or pictures for you so you have it moving forward. Thanks for the reply and be safe out there !
@@trapperjay9476 thanks. But it will require heat to get the valve body off the bottle i tried it without and scared up my bottle with a pipe wrench
I had one break after about a month. I had another bottle on it. It broke in 2 days. I have another one on there now. It won't shoot in full auto. It shoots one shot, then makes a fart sound.
I have to rack another round. Works fine in semi-auto.
Thanks for the video
Dayum!!
I really want one of these!
I've seen a few videos that show those nielson slugs aren't very accurate through the blitz.
Nice!
We don't need to see the Chronograph. We trust you.
You are one of the few, i thank you
@@airpower7692 is there a larger capacity magazine than 33 for the Hasan Blitz wether factory or aftermarket? Thanks
@@J0HN_3_16 no sir this is the largest as of now
Halo Sir, where have you been, haven't seen your video lately
My serious apologies for the lack of content honestly it's mostly weather-related but due to the fact that I don't have new products I can't really bring you anything new yet
i really want one to , greets from a new sub from Holland
Thanks! Welcome to the channel
Where did you get the extended mag? Are they available in .177?
Amazon
Apparently the .177 extended mag doesn't exist
@@airpower7692 Well maybe in the US. In my european country amazon does not even sell you an arrow let alone a mag for an air rifle ;) (But there are other shops that do ;) For everything that is not a soft air you have to order from a gun shop. And they also are only allowed to ship, Bows, Crossbows, Arrows and hunting tips + air rifles and ammo for them. For the rest you have to visit the store in personal :(
How many shots in full auto @ 50 yards from a full tank? It's a joke at 1 cart (that we didn't see you fill up) that you have to fill.
Why not place Ballistic Precision @ 50 yards and 100 yards to really see fps at impact?
Because I can't afford to keep buying chronographs they will get shot at that distance it's not really practical. from a fulfill 250 bar I can run two magazines which is 32 rounds in the rifle will have 200 bar left in it I've done this in previous videos already
You don't talk about how Much is it?
About how much what is exactly?
Nice dumpin
Cool air rifle but unfortunately a little too much power for my backyard :(
Turn it down pretty easy just loosen the back plate enough so it still fits the stock or you could buy the 177 caliber but you don't have to get it at all it's your choice
@@airpower7692 Thanks for your answer. Thats a really good idea (I saw this rifle today in another vid so i was very interessted in the energy) But if you can lower it i may give it a try :) Looks so much fun and as said if you can lower the FPE so it does not totally destroys my wooden fence and hurts a neighbour i maybe give it a try.
@@chrischrist4160 I've a video tear down in this and there's a bushing in front of the spring as well that if turned backwards will lower the fps also hope all this helps but as for s wooden fence i wouldn't want to shoot that way cause you need real low power like 8FPE i think the lowest you'll get the blitz in 30 cal is 45FPE not sure about the 177 cal I've never had one
@@airpower7692 No damage is not not the problem. If i miss my bullet catch so be it. (But my neighbour has a 4 years old kid) And i would NEVER EVER forgive myself if i miss the bullet catch and it makes it through the fence. But again damage to the fence, No problem i just want to make shure that there is no way it can go through.
@@airpower7692 Btw really thank you for your concern but the "fence" is 2 yards high and massive wood. So 30-45 Fpe will definitely damage it if i miss and hit the fence. But as long as there is no chance in this world that a bullet can make it trough i´,m fine.
What would happen to a fully grown man with a full auto shot to the chest?
Very bad things more than likely especially at the close distance in a home. I'll set up some hard wood targets with soft fruit behind them to show in a video soon for you
These munch 2 x 4's at range. for the price they are more fun than Huben or RAW airguns.
@@airpower7692 Thx
Have you diesel it yet ?
Only with what ever lube get past from the internals not on purpose NO
Maybe some gun oil.
60 fpe = 65 kph normal firearms have a speed of 400 + kph
These things i know so what are you actually telling me?
Does it always run? Or does it have issues like the small omes in which the width varries?
I've only had issue with the original mags until i tighten the springs on them but yes besides that it runs it just runs
Seems really loud 😬
No it's really not to me anyway at least compared to any firearm or big bore airguns
Красаучег... Атлет... Смердь
3 minutes i will never get back and didn't see one shot...............lolrotf
I'm sorry you vision impaired hopefully they'll find a fix for that in the future
Let us see you get an old Toyota and destroy it.
Hahaha that would be cool if i can find a free one
@@airpower7692 Lots of them parked on the streets.
Needs a 200 round drum! or drop the fire rate just a fuzz.
I have only seen this video, will not watch more due to poor marksmanship
Apparently you don't understand how this works you should do more research for better understanding of how to choose ammo to find accuracy
9 years in Army, last 3 as Drill Srg running rifle range, ammo does affect accuracy, but so does B.R.A.S.S. which you really dont practice from what I see in your video, finger placement on trigger, the squeeze affect your left to right, breath control up and down, I understand, pleanty I understand, you missed a big ass jug, multiple times, DO YOU UNDERSTAND?@@airpower7692
It’s a red dot at 50 Haass. Relax, crack a bud light, & watch some more AirPower videos 🤙
Tu parles trop.
Don't talk so much do something
Have to get me one for home protection. 33 Rounds gonna hurt and the purp gonna drain out fast.
Haha..problem is its not reliable...at all..Even the hatsan usa website is from 1980,doesnt work have the time when you go to pay...I wanted to keep it but I didnt..If you need anything from them they will Not be thier..maybe like a month after they will send you a email...Im doing this so others will not be put through what ive just gone through.Do youreselves the favor and save up a bit longer and go with a differnt company all together...I wanted this gun so badly and they ruined the who,e experience..sent a non working gun with a bent barrell..you can see its bent just by looking... Reiculousd...
Nice!!!