Saying again your amazing, fixed my singer 507 myself thanks to you and all your videos. Will make maintenance so much better and then it can do a professional service once a year as needed 🎉
You didn't show me how to fix the problem. You blew some air in the machine, and then it was all magically put back together and working. Why am I watching your video?
Thankyou sir, the best I can do right now is subscribe to your channel, I just fixed my other halves singer heavy duty she is working on at the other side of the room, jammed teeth today and we had that clicking sound a couple days ago, simple fix and much appreciated.
I have my singer quantum 9960 apart and am trying to see why the backside of my feed dogs are not all the way up when the dogs are in the up position. There is a nut/small threaded plastic piece and a pin attached to the plastic piece that I believe the pin came out of it home. How can I fix this?
Could you tell me how to get my needle plate back in? I took out the 2 screws to and removed it to clean out some thread and now I can't get the plate to go back in. It seems like something is in the way underneath preventing it from laying flat so I can put the screws back in. I have been fiddling around with this problem for 2 days and just can't figure it out. Same machine as in your video. Do you know what could be preventing it from going back in? I've tried everything. I have two of these machines and never had this much trouble with something so simple. Thanks!
Feeed dogs on my singer 2277 feel sharp enough, but dont seem to move the fabric very well. I have a brother se600 that has that digital movement, feed dogs are perfect in flowing fabric through. Do you suppose a simple replacement will suffice? I shouldn't have to aid in pulling fabric through, more prevalent an issue during reverse.
Could you show me how to fix the bobbin winder on a Singer 5528. I have watched you fix this problem on other Singer machines. My bobbin winder has more parts. Please show me how to fix the bobbin winder on a Singer 5528
I was hoping you can show me how to fix my feed dogs on a brother xr3240. The problem is they wont reengage after being lowered. I did all the advised steps to no avail. I think there might be a screw or something that came off on the inside that connects the switch to the dogs. I tried looking for a service repair manual but they are hard to find. I don't mind buying one if I could find it. If you or anyone reading this can help it would be much appreciated, thank you.
H!!! I have a brother sewing machine...my problem is the Pressure foot and the needle do not align at the center of the feed dog...what I mean is how to adjust the pressure foot to move it backwards.
My machine won't sew button holes. I've set it up as per instructions but all it does is the first bar stitch of the button hole stitch but nothing else. It sews perfectly well while doing other stitches. Can anyone help me. It seen a bit strange because the last time I used the machine I did buttons holes without any problems.
Saying again your amazing, fixed my singer 507 myself thanks to you and all your videos. Will make maintenance so much better and then it can do a professional service once a year as needed 🎉
You didn't show me how to fix the problem. You blew some air in the machine, and then it was all magically put back together and working. Why am I watching your video?
Would have loved to see how to fix it. My machine has the exact problem. Any more insight on this??
Thankyou sir, the best I can do right now is subscribe to your channel, I just fixed my other halves singer heavy duty she is working on at the other side of the room, jammed teeth today and we had that clicking sound a couple days ago, simple fix and much appreciated.
You didn’t actually show how you made changed the mechanism for it work
I was thinking that vacuuming out all those sparkles be better than blowing /spreading them out through out the other hidden parts of the machine. :)
Presser foot on my singer 6212 and i don't have a clue how to get it back in can you please help out i love your video
I have my singer quantum 9960 apart and am trying to see why the backside of my feed dogs are not all the way up when the dogs are in the up position. There is a nut/small threaded plastic piece and a pin attached to the plastic piece that I believe the pin came out of it home. How can I fix this?
Could you tell me how to get my needle plate back in? I took out the 2 screws to and removed it to clean out some thread and now I can't get the plate to go back in. It seems like something is in the way underneath preventing it from laying flat so I can put the screws back in. I have been fiddling around with this problem for 2 days and just can't figure it out. Same machine as in your video. Do you know what could be preventing it from going back in? I've tried everything. I have two of these machines and never had this much trouble with something so simple. Thanks!
my singer futura ce 250 - the feed dogs will go down but i have to manually lift them back up. Any ideas or thoughts?
Feeed dogs on my singer 2277 feel sharp enough, but dont seem to move the fabric very well. I have a brother se600 that has that digital movement, feed dogs are perfect in flowing fabric through. Do you suppose a simple replacement will suffice? I shouldn't have to aid in pulling fabric through, more prevalent an issue during reverse.
I have this machine. It goes out of time 2 times now. How can i fix that?
Could you show me how to fix the bobbin winder on a Singer 5528. I have watched you fix this problem on other Singer machines. My bobbin winder has more parts. Please show me how to fix the bobbin winder on a Singer 5528
What tools did you use to clean the the sewing machine
I was hoping you can show me how to fix my feed dogs on a brother xr3240. The problem is they wont reengage after being lowered. I did all the advised steps to no avail. I think there might be a screw or something that came off on the inside that connects the switch to the dogs. I tried looking for a service repair manual but they are hard to find. I don't mind buying one if I could find it. If you or anyone reading this can help it would be much appreciated, thank you.
What's wrong with Singer 4432 stuck on reverse?
please do how to fix feed dog issues on a singer mon ami 11 deluxe 390
H!!! I have a brother sewing machine...my problem is the Pressure foot and the needle do not align at the center of the feed dog...what I mean is how to adjust the pressure foot to move it backwards.
You didn,t show me anything
Yeeeah...star dust✨
the plate is bended cz user was pulling the fabric from the back, it bends the needle whitch hits the plate.
My machine won't sew button holes. I've set it up as per instructions but all it does is the first bar stitch of the button hole stitch but nothing else.
It sews perfectly well while doing other stitches. Can anyone help me. It seen a bit strange because the last time I used the machine I did buttons holes without any problems.
my singer 4411 does NOT sound like this one does... mine CLUNKS so badly with every stitch i make 😬
My machine won't reverse stitch but nothing looks stuck
OMG what have they been sewing!
How to fix dog foot
I was hoping you was going to show how to fix feed dogs issues. All I saw is you cleaned it. Not a very informative video.
You need to steady the camera....
Awful machines. The only thing heavy about them is the sticker on the front.
The swinging of the camera makes me nauseas, can't watch.
Lol you did not show how to fix the problem. What a waste of time