I'm at work now, and I CAN'T WAIT to get home to see if this is what effed me up yesterday. I was so infuriated it took all my control to contain myself.
Omgosh.. what an idiot I was!!! I immediately went to my sewing machine and … yes… the bobbin winder was engaged. I looked at everything but that!! I am a newish sewing and just decided I want to try making a 9 block vanishing block and thanks to you video I can try it!! Thanks for posting what may seem simple to others, but still needs to be stated for newbies like me!
thanku for this comment. i wasn't able to use my machine because i thought it was stocked up. came to this video and reading comment while watching. went over my machine and it was indeed engaged🤦🏽♀️
OMG! I have my machine taken half apart, getting back into a bit of sewing for a costume and thought I had a broken belt or something serious, nothing moved, motor ran but acted like it was in neutral, revving a car engine and going nowhere. Could not figure out how to engage the drive head, nothing worked and THEN this video, solved it in fifteen seconds! Let me say, I owe you big time for this! If you are ever in America I'll buy you a drink! Cheers and thank you again! Bobbin winder... it was the bobbin winder! Blonde I am for sure! 🤣
Hi. It must be a problem somewhere else in the machine. Try removing your bobbin case and looking for thread tangled in that area. Could be any number of issues causing it. If the machine hasn't been serviced recently it may need oil and clean. Thanks.
Thank you. After fiddling around for an hour watching RUclips videos I was at a loss as to why the wheel wouldn’t turn. My husband had filled a bobbin prior to this. I would have never thought that it hadn’t released, but that’s exactly what happened.
omg!!! I bought a new machine because mine wouldn’t move… started watching your video - it WAS my bobbin winder engaged!!! thank- you!! bringing my new machine back! thank you thank you!!!
I literally took my sewing machine apart.... I spent hours and I am a new sewer so i nearly gave up on the whole plot! You saved my new hobby and I thank you immensely!!!!❤❤❤❤❤❤❤
Oh thank you so much for showing me the bobbin winder switch!! I couldn’t figure out why the wheel would not turn counter clockwise very far so I was thinking something jammed it. I am back in business after months of not using my machine. God bless you!!
Very grateful for this video! I too took the back off my machine and was baffled. I had not used my machine for a long time and tried to sew. The machine sewed for a little bit then got stuck.....every time 🤣 Great lesson for solving a problem: Assess the function of everything that you can see, even if it appears to be irrelevant. Then delve deeper.
I am like everyone else!! I was FLIPPING OUT because I have alterations due tomorrow and I couldn't understand why my machine wasn't working. It was the bobbin winder. thank you thank you thank you
Thank you thank you! The dang bobbin winder! I took the hand wheel cover off and saw the problem where it was being blocked from turning but did not know it had to do with the bobbin winder being engaged. I wish Juki made a note of that in the Troubleshooting section of the operator’s manual. Glad I stumbled across this video or I would have hauled the machine in to a repair shop.
Omll tysmm... Got a second hand machine and thought that I would have to go and take it to the repair shop but lo and behold the bobbin winder was engaged
I got excited and rushed to my jammed machine hoping it was the bobbin winder. Sadly not. So guess I am going to make a trip to the service place tomorrow. The hand wheel is not turning using food peddle and when I manually turn it, it does but with resistance. I also oiled the belt. Not much difference.
The Bobbin winder!!!!! I didn't even THINK of that! lol It's always the simple things you overlook. Yeah, I had it apart and oil and everything. On the brightside, I needed to do maintenance anyway. LOL Thank you! Thank you!
What even when bobbin winder is in not winding position? Wheel still feels tight when you turn it. What is the issue in this case? Wheel should be freely turning right.
@@anniecurtis8147 After going through lot of other (Indian Hindi) RUclips videos , I found the issue with my sewing machine. It was thread broken in the shuttle. Mine is basic Singer Start model where removing shuttle and cleaning was easy. It was on two clips. When I removed the shuttle to clean I found lot of thread broken and stuck there. Also all the cotton like stuff. I cleaned all and found my wheel was free. Finally I oiled it and it's good to sew again.
So, if the bobbin winder spins very slowly, or not at all…is it typically the rubber tire needing replacement? I finally got it to stitch, but I cannot make a bobbin anymore. Tried to remove cover but no luck accessing rubber; hoping there’s a # on it. I cannot find my model online either, for the rubber tire size; Euro-Pro X 7130. Is there a compatible make/model?- they never name mine on Amazon or sewing parts sites. Frustrated.
I don’t have this problem…bobbin winder is disengaged. The wheel gets blocked as is the needle so I cut the thread from the top and find broken thread inside or wound around the axis for the bobbin (I don’t know what it’s called - the metal stick that holds the bobbin).
@@rachaelparker3064 Firstly, have patience, these machines don’t operate the same everyday. I know it sounds silly but that has been my experience. So, I saw in another video to check your tension (we tend to put it on the smallest, so put it on 3-4). Then, with my machine I noticed that certain stitches work for a certain length then they mess up. I don’t have an expensive machine and I also inherited it from my sister who bought it at a garage sale. Try to enjoy making your project, regardless of any problems it may give you…when it starts getting you mad, change your thread and try the same stitch on a “fat quarter” and try using different threads so you can see where the problem is (this is the most helpful by far).
My machine is completely fine However the needle isn't turning when I step on the pedal, it will work when I Turn the handwheel My bobbin winder is the first thing I checked Nothing is engaged with the bobbin or bobbin winder I don't understand the issue can you help me?
When i push the button on my 6800c singer to bring the needle down to start sewing the needle will not move up or down. But If i move the knob it will move the needle up and down. How do I fix this.
I have what seems to be the opposite problem... the winder is jamming before it has done one revolution... maybe the clutch is the issue?... when I disengage the winder and turn the machine using the wheel it feels heavier than normal as well. I had just finishe a massive woollen project...
Hi I have a singer Simple machine and when I engage the bobbin winder. The hand wheel is not turning WHICHI IS CORRECT But the clutch is no properly working and the belt also jammed. So matching is not able to thread the bobbing winder and it is jammed basically. any solution, please tell me
Can you please help..my machine needle was bent due to stitching a thick jeans fold and the needle is now touching the bottom and not catching the thread. (Janome 808 A)
I have a singer fashion mate 3337 every time (or almost every time) I do reverse stitch at the beginning of my sewing the machine jams. However the fabric seems to jam in the speed dogs. Help please. This is a brand new machine
Hello , my singer sewing machine heavy duty I just purchased it brand new but when I attempt to start sewing it’s almost like the needle won’t move ?? I made sure the bobbin lock isn’t engaged so it’s not that and everything it threaded correctly and the power works it’s just when I am ready to sew it almost sounds like something is blocking the machine from moving ??
Oh my God. Spent 2 hours taking and putting my machine back, close to tears. Found the solution literally 31 seconds into this video. Thank you 😭
Same here...! Hahaha xD
Me too. I was close to crying too
Me three!! Thank you so much
I feel so much better about myself knowing I’m not the only one. But honestly it has to have been twenty years or better since I sewed anything
I'm at work now, and I CAN'T WAIT to get home to see if this is what effed me up yesterday. I was so infuriated it took all my control to contain myself.
Was in tears at the thought of losing this machine. The bobbin winder was engaged! Thank you so much!
Ughhhh I wish this was my problem… the bobbin winder works but the needle part isn’t 😭
Omgosh.. what an idiot I was!!! I immediately went to my sewing machine and … yes… the bobbin winder was engaged. I looked at everything but that!! I am a newish sewing and just decided I want to try making a 9 block vanishing block and thanks to you video I can try it!! Thanks for posting what may seem simple to others, but still needs to be stated for newbies like me!
thanku for this comment. i wasn't able to use my machine because i thought it was stocked up. came to this video and reading comment while watching. went over my machine and it was indeed engaged🤦🏽♀️
OMG! I have my machine taken half apart, getting back into a bit of sewing for a costume and thought I had a broken belt or something serious, nothing moved, motor ran but acted like it was in neutral, revving a car engine and going nowhere. Could not figure out how to engage the drive head, nothing worked and THEN this video, solved it in fifteen seconds! Let me say, I owe you big time for this! If you are ever in America I'll buy you a drink! Cheers and thank you again! Bobbin winder... it was the bobbin winder! Blonde I am for sure! 🤣
Unfortunately this did not solve my problem. The bobbin was not engaged and the wheel still won’t turn. 😢
Hi. It must be a problem somewhere else in the machine. Try removing your bobbin case and looking for thread tangled in that area. Could be any number of issues causing it. If the machine hasn't been serviced recently it may need oil and clean. Thanks.
Thank you. After fiddling around for an hour watching RUclips videos I was at a loss as to why the wheel wouldn’t turn. My husband had filled a bobbin prior to this. I would have never thought that it hadn’t released, but that’s exactly what happened.
I spent an hour trying to fix my machine- I just had the bobbin winder on 😂 you my man are an earth angel😂
omg!!! I bought a new machine because mine wouldn’t move… started watching your video - it WAS my bobbin winder engaged!!! thank- you!! bringing my new machine back! thank you thank you!!!
I literally took my sewing machine apart.... I spent hours and I am a new sewer so i nearly gave up on the whole plot! You saved my new hobby and I thank you immensely!!!!❤❤❤❤❤❤❤
Thank you so much. I've spent over an hour trying to figure out what was wrong. Less than 10 seconds and you solved my problem. Thank you again.
You saved me such a headache. My bobbin winder was engaged. Such an easy fix. Thank you
This video is AWESOME! I was stuck for an hour... the problem was fixed in 30 seconds!
Oh thank you so much for showing me the bobbin winder switch!! I couldn’t figure out why the wheel would not turn counter clockwise very far so I was thinking something jammed it. I am back in business after months of not using my machine. God bless you!!
I'm pleased it helped. Enjoy your sewing!
Same! I disassembled my whole machine for no reason
I was so close to taking apart everything on the sewing machine and came across your video. Thank you!!
THANK YOU I HAVE BEEN TRYING TO SEW BUT MY NEEDLE WOULDNT NOVE I WAS SO CONFUSED THIS VIDEO SAVED MY TIME
Wow life saver 🙌 I spent time wondering I was even planning on taking it to the repair shop till u decided to try y luck on RUclips
Thank you!! What a relief and what an easy fix!
I was about to spend $$ getting it repaired, after watching your video, I was able to just move it in 1 second and problem fixed! Thank you!
You are very detailed and easy to understand
Thanks.
You’re a lifesaver! Thank you!
I was just in the middle of sewing a bag and my needle and my bobbin got messed up! This is so helpful! Thx!
Very grateful for this video! I too took the back off my machine and was baffled.
I had not used my machine for a long time and tried to sew. The machine sewed for a little bit then got stuck.....every time 🤣
Great lesson for solving a problem: Assess the function of everything that you can see, even if it appears to be irrelevant. Then delve deeper.
I am like everyone else!! I was FLIPPING OUT because I have alterations due tomorrow and I couldn't understand why my machine wasn't working. It was the bobbin winder. thank you thank you thank you
Didn't use my machine for five years because I thought it was broken :D. Thank you so much
Thank you so much!! You're right it was the bobbin winder that was engaged in my machine!
Amazing! Laughing to find this after a bit of time spent stuck!
First off, thanks for getting to the point without showing off your dog or some crap intro. Secondly, you saved us agony. Subbed!
Thank you thank you! The dang bobbin winder! I took the hand wheel cover off and saw the problem where it was being blocked from turning but did not know it had to do with the bobbin winder being engaged. I wish Juki made a note of that in the Troubleshooting section of the operator’s manual. Glad I stumbled across this video or I would have hauled the machine in to a repair shop.
Good point. I have people bring machines to me to be un-jammed and this is often the cause. Thanks.
Omll tysmm... Got a second hand machine and thought that I would have to go and take it to the repair shop but lo and behold the bobbin winder was engaged
LOL Ohhhhh good grief!!! Thank you so much for the first 30 seconds of this video. It didn’t even cross my mind that the machine wasn’t set properly 🤪
Thank you, thank you thank you so much. You saved my life in 10 seconds!!! Following you!!❤😊🙏
I got excited and rushed to my jammed machine hoping it was the bobbin winder. Sadly not. So guess I am going to make a trip to the service place tomorrow. The hand wheel is not turning using food peddle and when I manually turn it, it does but with resistance. I also oiled the belt. Not much difference.
Any other reason for a jammed wheel?
The Bobbin winder!!!!! I didn't even THINK of that! lol It's always the simple things you overlook. Yeah, I had it apart and oil and everything. On the brightside, I needed to do maintenance anyway. LOL Thank you! Thank you!
Thank you!!!
My bobbin winder is disengaged on my singer 1409. But the sewing parts do not function, plus the motor hums, when I engage the foot pedal.
So HELPFUL and CLEAR! Thank you!!!!
Thanks, I have this machine (Bernette 65) and the stitch selector wheel is jammed. Any tips?
This video saved the day
Wowwww thank you so much GodBless
you are a life saver sir
What even when bobbin winder is in not winding position? Wheel still feels tight when you turn it. What is the issue in this case? Wheel should be freely turning right.
Same
@@anniecurtis8147 After going through lot of other (Indian Hindi) RUclips videos , I found the issue with my sewing machine. It was thread broken in the shuttle. Mine is basic Singer Start model where removing shuttle and cleaning was easy. It was on two clips. When I removed the shuttle to clean I found lot of thread broken and stuck there. Also all the cotton like stuff. I cleaned all and found my wheel was free. Finally I oiled it and it's good to sew again.
@@graceg751 hi can u show me a video how u fix it
@@dylanwong7558 ruclips.net/video/1Vb6Ue7m5kI/видео.html since this is my sewing machine model. Hope this video will help you.
So, if the bobbin winder spins very slowly, or not at all…is it typically the rubber tire needing replacement? I finally got it to stitch, but I cannot make a bobbin anymore. Tried to remove cover but no luck accessing rubber; hoping there’s a # on it. I cannot find my model online either, for the rubber tire size; Euro-Pro X 7130. Is there a compatible make/model?- they never name mine on Amazon or sewing parts sites. Frustrated.
I don’t have this problem…bobbin winder is disengaged. The wheel gets blocked as is the needle so I cut the thread from the top and find broken thread inside or wound around the axis for the bobbin (I don’t know what it’s called - the metal stick that holds the bobbin).
I have the exact same problem, I'm on day 4 of trying to fix it
@@rachaelparker3064 Firstly, have patience, these machines don’t operate the same everyday. I know it sounds silly but that has been my experience. So, I saw in another video to check your tension (we tend to put it on the smallest, so put it on 3-4). Then, with my machine I noticed that certain stitches work for a certain length then they mess up. I don’t have an expensive machine and I also inherited it from my sister who bought it at a garage sale. Try to enjoy making your project, regardless of any problems it may give you…when it starts getting you mad, change your thread and try the same stitch on a “fat quarter” and try using different threads so you can see where the problem is (this is the most helpful by far).
Pls do a video of the down part not roll to change partern
omg ..what a relief...thank you so very much
🙏🙏🙏 Thank you so much! I was ready to throw this machine in the dumpster. YOU saved it! XOXO Really, thank you so much!
Thank you! You solved my problem!
I am looking for a little more advanced fix for a jammed flywheel other than this easy fix.
Hope you have found solution to the Jammed wheel? I am experiencing jammed wheel issue now. Please, kindly share your knowledge.
Thanks in advance
Thank you!
THANK YOU.
Thank you so much! You just saved me a maintenance bill xD
I disengage my bobbin winder and still my hand wheel is not turning or moving freely, any other advice please
It was my bobbin winder. Thanks!
Omg! I took my machine apart before I saw this video. Slap on my forehead moment. The bobbin winder was engaged!
My machine is completely fine
However the needle isn't turning when I step on the pedal, it will work when I Turn the handwheel
My bobbin winder is the first thing I checked
Nothing is engaged with the bobbin or bobbin winder
I don't understand the issue can you help me?
Very helpful!
God bless you, thank you so so much
When i push the button on my 6800c singer to bring the needle down to start sewing the needle will not move up or down. But If i move the knob it will move the needle up and down. How do I fix this.
You’re the man!! Thanks!
Thank you that was my exact problem
THANK YOU SO MUCH!!!
thank you
OMG you saved my life you the best thank you sooo much ❤️
Awe Thank you so much , I had no idea
شكرا جزيلا
نحن فعلا نستفيد من هذه الفيديوات
Thank you very much, I was about to lose my mind....
I still cannot move the jammed wheel of my singer 2250 ..have tried solution in this video...no luck...please help
omg you saved my time ..best of luck
Oh thank you you save my time 🥰🥰
Thanks a lot for this video.. 🌹👍🌷
LIFE SAVER
saved my life.❤️
Thank you so much!!!!
omg thank u !!!
Tysm!
I took my sewing machine apart 🤣😅 you saved me thank you!
So how to you wind your bobbin then ?
What if it's Not the bobbin filler engaged?
I have what seems to be the opposite problem... the winder is jamming before it has done one revolution... maybe the clutch is the issue?... when I disengage the winder and turn the machine using the wheel it feels heavier than normal as well. I had just finishe a massive woollen project...
My singer sm024. Mesin
Same problem.. My mesin
Pls help give a new video.
Mine is still doesn't work even after follow your instructions😭 its so frustrating! Hikssss
Hi
I have a singer Simple machine and when I engage the bobbin winder. The hand wheel is not turning WHICHI IS CORRECT But the clutch is no properly working and the belt also jammed. So matching is not able to thread the bobbing winder and it is jammed basically.
any solution, please tell me
OH! Thank you! OMG! This was such a relief!
how do i remove the wheel on my sewing machine
Wow… I’m an IDIOT! 🤪
Thank you for saving me a trip to the sewing machine shop!
Can you please help..my machine needle was bent due to stitching a thick jeans fold and the needle is now touching the bottom and not catching the thread. (Janome 808 A)
My singer simple machine I have to hold the bobbin winder in the disengaged position manually as it no longer locks, suggestions?
Can you help my sew machine does not speed up sewing jus goes really slow
How many OMG are you getting? MD, PhD... no matter! Got me!!!!! Thank you soooooo much!!!!!!!
Sometimes the simple things can really mess things up. Thanks
Thanks.
My bobin winder is ok....but the wheel wont turn and sew...
I have a singer fashion mate 3337 every time (or almost every time) I do reverse stitch at the beginning of my sewing the machine jams. However the fabric seems to jam in the speed dogs. Help please. This is a brand new machine
It's NOT the bobbin winder. The needle sews but stays in the same place. What can I do?
Just a thought…make sure fabric is being grabbed by the feeder below plate. It sounds like you have no grip on fabric?
My machine screws are so tight how 3:17 to loosen them
Nope…still jammed…thanks for the video anyway.
My bobbin winder is not engaged but it's acting like it is
Mine is jammed when it’s disengaged when it’s engaged it’s not turning
Have singer 1411. Bobbin case is up where it cannot rotate. Machine is locked.
Same, did u find a solution?
Hello , my singer sewing machine heavy duty I just purchased it brand new but when I attempt to start sewing it’s almost like the needle won’t move ?? I made sure the bobbin lock isn’t engaged so it’s not that and everything it threaded correctly and the power works it’s just when I am ready to sew it almost sounds like something is blocking the machine from moving ??
Not sure exactly what that would be. I would go back to the people you bought it from as it will be under warranty. Thanks.