The minor capacity difference is pretty negligible, the 18650 doesn’t output the required voltage so you would have to boost the voltage up. Which just adds complexity to an already complex design. Two cr123s in series gets the job done without the need for extra components
@@vonscherfarms925 Thanks, i used your bridge, but with 18650 and also i added ir. Whole setup cost me around 300$ , but performance much better. You can watch my footages.
@@vonscherfarms925 Thanks, i used your bridge, but i built whole setup by myself with ir ,18650 and my parts. It costs me around 300$. My aim was the best sensitivity.
yeah, I’ve been watching videos cause I just figured out that I can build these for like 700 bucks right now that’s including the best display possible because I’m not trying to have any any failure with anything I want the best of the best especially for dig. And yeah, there is zero lag I mean there’s one guy on RUclips that does a video of him pulling out and in and there’s literally from real time to the NVG there’s no lag whatsoever.
It is and I have but the drone DVRs and not record in 400p and due to the video compression it compresses the noise pixels into good pixels effectively ruining them. This renders a basically unusable video
hey man im sorry for the lack of footage my recording skill leave much to be desired but there has been a few others on the interwebs to put out footage i plan to put out some more this weekend
“Don’t just fuck with it to fuck with it.” Words to live by.
I love what y’all do man. Keep up the good work! Really helping the working man keep up!
How far can you see with this, any chance you can put up a video of in use? Love the work
Try Conformal Silicone Coating to waterproof your electronics.
Why don`t you use 18650 battery ? It is easier and has more capacity. Also for 3 position switch it may have been ir illumination.
The minor capacity difference is pretty negligible, the 18650 doesn’t output the required voltage so you would have to boost the voltage up. Which just adds complexity to an already complex design. Two cr123s in series gets the job done without the need for extra components
@@vonscherfarms925 Thanks, i used your bridge, but with 18650 and also i added ir. Whole setup cost me around 300$ , but performance much better. You can watch my footages.
@@vonscherfarms925 Thanks, i used your bridge, but i built whole setup by myself with ir ,18650 and my parts. It costs me around 300$. My aim was the best sensitivity.
Please help me I'm going to attempt to build one of these I need all info I can get
I got rid of my sionyx, the screen lag was ridiculous for anything other than a flat range. How do these compare?
These have no noticeable latency. There’s should be videos by a third party on RUclips comparing sionyx, analog and 69s
yeah, I’ve been watching videos cause I just figured out that I can build these for like 700 bucks right now that’s including the best display possible because I’m not trying to have any any failure with anything I want the best of the best especially for dig. And yeah, there is zero lag I mean there’s one guy on RUclips that does a video of him pulling out and in and there’s literally from real time to the NVG there’s no lag whatsoever.
is it possible to use a drone DVR with these or would that be kind of dumb?
It is and I have but the drone DVRs and not record in 400p and due to the video compression it compresses the noise pixels into good pixels effectively ruining them. This renders a basically unusable video
@@vonscherfarms925 good to know, I won't even bother then. Thank you
Got a discord? You selling units?
I was wondering the same thing
Love the content
Overall cost?
If you build it yourself under $600
Probably a stupid question but does the frame rate keep up pretty well with use ? Could I use these to hunt boar n shit ?
Yes the frame rate is usable for driving hunting CQB etc
@@vonscherfarms925mcdonalds here i come
Can you give some useful night vision footage? There's no telling what you're paying for
hey man im sorry for the lack of footage my recording skill leave much to be desired but there has been a few others on the interwebs to put out footage i plan to put out some more this weekend
Where did you get the parts printed in MJG, and would you recommend it?
A us based company jaws tech does good work