PVS-69 alpha build guide

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 47

  • @vonscherfarms925
    @vonscherfarms925  Год назад +20

    At the very end of the video you’ll see the MX-69s end up not working. I was able to figure out why! The camera doesn’t have enough clearance to be on the inside without some space between the MX-69 parts.

    • @ace4640
      @ace4640 Год назад

      Yeah dude, I felt the frustration on that! Glad you figured it out!!

    • @ace4640
      @ace4640 Год назад

      I have one question, would it be possible to use the fma bridge housing at all, to house the solderings etc?

    • @Opinion123-no-walls
      @Opinion123-no-walls 8 месяцев назад

      So how did you go about fixing the space problem?

    • @vonscherfarms925
      @vonscherfarms925  8 месяцев назад

      @@Opinion123-no-walls slight tweaks in the Mx-69.2 and a complete redesign in the mx69.3

  • @thebosscato
    @thebosscato Год назад +8

    Printing the setup as we speak 💪 thank you for all the hard work you put in to all this bro. Cant wait to get these running

  • @ace4640
    @ace4640 Год назад +4

    Awesome stream, thanks again for uploading this!!!*** happy to say I just ordered the kit!!! Can’t wait! 😊

  • @TheRiskyDingo
    @TheRiskyDingo Год назад +5

    Can you recommend a tool list as well? I havent done any sort of electronics work. (Plug and play PC build and worked on cars, never touched electrical)Might be a good quick video to make on going through all the tools you use to build your unit with links as well as a showcase of what you get per kit with a link to your website.

  • @shawnwillis7561
    @shawnwillis7561 Год назад +3

    Just started printing the gen 4 tubes. I have a Chromebook that's a pain in the ass for opening .3mf files, but I was able to upload the files to onshape and then download the individual files. Hopefully in a couple weeks I can get all the hardware off your site and the electronics off Amazon. I think I'm going to try casting the mx69 tubes in aluminum after I print them in polycast filament. I'm so fuckin jazzed to finally have the opportunity for some head mounted nvg's. Youre a brilliant madman to come up with this dude

  • @CultOfSpinningTriangles
    @CultOfSpinningTriangles Год назад +1

    Any chance your gonna bring back the aluminum mx69 housings? Looked all over your site and cant find them

    • @vonscherfarms925
      @vonscherfarms925  Год назад +1

      Not for a while, I’m a very low budget webstore so I have to prioritize what I keep in stock

  • @Gandalf_axtuL
    @Gandalf_axtuL Год назад +2

    How different is the wiring for the analog version, and is there somewhere I could get info on doing that? Total beginner to wiring electronics so anything helps.

    • @vonscherfarms925
      @vonscherfarms925  Год назад +1

      I think I explained in the first 2 minutes that’s they’re exactly the same housing

  • @johntom7237
    @johntom7237 Месяц назад

    Is there any way I can pay you to build the Pvs69 for me?

  • @Jack-ti5ro
    @Jack-ti5ro Год назад

    Could you flatten two edges of the cone washer to allow you to grab a hold of them with a crecent wrench or pliers? Not super important but might help

    • @vonscherfarms925
      @vonscherfarms925  Год назад +1

      Definitely could and if I remember correctly one member of the community made such a part

  • @rogerward8593
    @rogerward8593 10 месяцев назад

    What is the website that you can order the kit from and the plans?

  • @swirlypan4174
    @swirlypan4174 Год назад +1

    So can you use mx 10160 for the housing you build?

  • @carter8828
    @carter8828 11 месяцев назад

    Can you use the v-760 displays? And can you have them digital?

  • @Gooney_Tunes
    @Gooney_Tunes Год назад +1

    Will the aluminum digital tubes be available for purchase if I want to build one of these my self?

    • @Gooney_Tunes
      @Gooney_Tunes Год назад

      The aluminum pieces for the tubes*

    • @vonscherfarms925
      @vonscherfarms925  Год назад +3

      Potentially yes! They are quite a bit more expensive than MJF parts though

    • @Gooney_Tunes
      @Gooney_Tunes Год назад

      @@vonscherfarms925Dope

  • @dionesribeiro2363
    @dionesribeiro2363 8 месяцев назад

    Olá! Como consigo a lista e os links dos materiais? 🇧🇷✌🏻

  • @niko-g
    @niko-g Год назад +2

    You should sell the MX-69 DIIT

  • @the_steko
    @the_steko 7 месяцев назад +1

    So hear me out, I want to make it as afordable and simple as possible, so where can i get the housing that was broken, because i dont want to make MX-69 coz its just unnececary work for me, i will run only digital, adn its simpler to just not open everything and solider that much....

    • @vonscherfarms925
      @vonscherfarms925  7 месяцев назад

      Nah brother it’s simpler to build the new MX-69s video coming this weekend

    • @the_steko
      @the_steko 7 месяцев назад

      @@vonscherfarms925 rly..., but the fucking lenses are expenciveeeee

    • @the_steko
      @the_steko 7 месяцев назад

      @@vonscherfarms925 i just want to be cheap as possible

    • @vonscherfarms925
      @vonscherfarms925  7 месяцев назад

      @@the_steko you can make it work with the V760 lenses and the CS8mm lenses

    • @the_steko
      @the_steko 7 месяцев назад

      @@vonscherfarms925 how much are the CS8 lenses

  • @iDom215
    @iDom215 Год назад

    Can I buy a set from you?

  • @dustyink.c
    @dustyink.c Год назад +1

    Nice! I'll be making one soon

  • @kevinaweseom2866
    @kevinaweseom2866 6 месяцев назад

    So is the alpha 1.1 the most up to date?

    • @vonscherfarms925
      @vonscherfarms925  6 месяцев назад

      No

    • @kevinaweseom2866
      @kevinaweseom2866 6 месяцев назад

      @@vonscherfarms925 do you not have the alpha 2 download link yet? 🙂 I’m doing my best to grasp all the number

  • @johndaviddoesmith4504
    @johndaviddoesmith4504 Год назад +2

    Dropped you an email at you web site… trying to get in touch about you building me a pair

  • @1navycorpsman
    @1navycorpsman Год назад

    Lol 8 bro what happened that epoxy hards hot

  • @Windzz
    @Windzz Год назад +1

    I will literally pay for a set to be printing and build idc the price let’s get in contact.

  • @matthewravo125
    @matthewravo125 Год назад

    Don't use Vaseline to lube the orings use krytox lol

    • @vonscherfarms925
      @vonscherfarms925  Год назад +2

      Shitttt that stuffs expensive!

    • @zachsmith6928
      @zachsmith6928 Год назад

      Vaseline is fine. All your trying to do is keep the oring lubed until it's installed. This guy is an aircraft mechanic who gets all the expired stuff for free. If this was something that had regular movement you would want a grease other than Vaseline for longevity. But as an installation lube it's fine.

    • @matthewravo125
      @matthewravo125 Год назад +2

      @@zachsmith6928 I would still worry that Vaseline would shrink or dry out the o rings over time.. krytox is the right thing to use here why not use the intended lubricant?

    • @zachsmith6928
      @zachsmith6928 Год назад

      @@matthewravo125 Your not wrong but, your missing your mark if you think people who are trying to build a $500 set of night vision are going to spend $25-50 on a tube of Krytox. Most cheap o rings your going to get are nitrite which most manufacturers actually recommend using Petroleum grease (vasiline is cheap and everyone already has it.)

  • @crm82475
    @crm82475 2 месяца назад

    Don't do this project!! I'm fairly decent with tech stuff and my build never worked, both analog and digital. I ran into a few snags where I emailed him directly for help. He responded a few times then didn't respond after a few follow up questions. DON'T DO IT!

    • @vonscherfarms925
      @vonscherfarms925  2 месяца назад +1

      theres an entire discord server with thousands of members. and an entire forum section dediated to build help. go there