How to install interior trim! Looks awesome!
HTML-код
- Опубликовано: 24 апр 2018
- In this video I'll be showing you how to install interior trim in my 2017 dodge challenger scatpack. I purchased the upgraded style of insert trim because the other style didn't have the black backing like this kind has and it makes the install not only cleaner, but it also makes the job easier!
Install should be fairly similar in all vehicles, but make sure you search for your specific vehicle when purchasing anything off amazon!
Feel free to browse the channel and subscribe if you like what you see! I'm doing a $300 Giveaway once I hit 7,000 followers on IG (Less than 300 away)
IG: DGProds Check it out!
Amazon Link
www.amazon.com/Electroplating...
Music Used in video.
• Video
For anyone that gets this... The instructions now say to cut at an angle so when you're putting them together it makes a cleaner finished look & don't have that little bump where the ends meet.
Did this to my challenger, you will run into thermal expansion and contraction. It will constantly pop out especially on the doors , also the instrument panel gap is to wide to hold this well, you may end up using an adhesive, actually a miniscule amount of clear flexible sealant works great it will hold it but also easily removable , the kind you put around a bathroom sink , not white ...clear
Thanks for the video. I was a little frustrated trying to install mine. When I get to my car tomorrow, I'll put mine in.
Thanks for the video man! Gonna apply the trim to my polo now.
Looks good - thanks for posting the vid!
Looks great thanks for sharing. Going out to trim my new GR86 now.
New to your channel and Dodge Family. I just bought my first Challenger last week in Destroyer Grey and I purchased the blue trim from your link. Love the videos. Keep posting! I’m learning much more about my car from them.
Joseph Oberzan welcome to the mopar family brother. Welcome....
Skullshots Thanks dude!!
Nice.. I'm definitely grabbing me a roll
Awesome video!
All the way from Britain... looks awesome. I'm thinking of blue trim. You made it look easy, was it ?? Saying that your car is pretty awesome too.
Thanks man! 👍
Loving the look of this. Probably going to do it to my car but I have no idea what colour to do...
Thx will buy it!!
Clean asf
Followed the link thanks. But did you get red or red1? 😂😂 curious
That looks sharp.
Appreciate it! I like the look! Might go to the LED lights though.
Destroyer Grey Productions I have seen another video with the LEDs it looked great if you can match the interior lights at night. Would love to see you post a video of that.
Thanks for the video I have the metallic purple trim for my knight challenger
Bro it’s a pain to get that in there. I have a challenger and the red trim just won’t seat as I’m installing
I tried this on my car not working for me keep falling out should I use a all purpose glue or double side tape
How much do you recommend getting I'm going to do my whole Vette inside I think
Great video. Spray bottle of dish soap and water makes it slide in easier. Keep wet and dry rags on hand.
That’s what _she_ said
Can you use the same strip for aircon vents ?
Cheers mate 👍🏾🦘🤎
its cool. ty..
It does look good but some car companies have much tighter tolerances. I bought this exact trim but it just doesn't wanna squeeze between the trim. Having a tea break then going to apply a little dishsoap to the rubber and try again.
Did that work for you? Having the same problem
@@c19xxc73 it did, but what helped a lot as well was parking my car in the sun for a little while or closing all the doors and turning the heating on full blast. The combination of a tiny bit of soap and the heat helped get it in. The heating will expand the gaps slightly. What I also found to help get it started was to cut a tail into the end so I can push the tail deep in then use the rest to catch it properly. I'll send pics or video to explain the tail thing further if needed. The tail thing helps with cars with tight tolerances.
I couldn’t find the background music so I’m not doing it
You should do your steering wheel
Do they glow at night?
They can come off easily over time.
looks insane man!!!!!! imma do it to mine now......... red racer car seats or red leather seats?
RT Jake red racing seats by Braum. Gonna be all red suede.
Thank you for the vid! Is it easy to take out and put another color?
It's super easy to take out but it's super heard to install if u have rlly tight crevices
Where can I order the trim?
I didn’t see you peeled off sticky strip cover like the one I did for my doors’ edges . Is this adhesive?
Its not
Cute
How is this holding up to hot interior temps and sunlight ?
I had the blue and it lasted about a month before all the blue faded to silverish.
fas window tint.
The interior of my car isn't black, it's badge and not leather so I don't know how itd look in my car
Is it easy to take back out? i have a lease so i wanna make sure i can take it out easily when i turn it back in
Super easy man! Just slide right out if needed and can reinstall it when you want! Thanks for the question!
Some areas of my interior went in just fine but others are being extremely difficult, any tips for the extra tight gaps?
Me too man
Wedge a trim removal tool slot it in, moving it along as you go down the trim
Might use 3m emblem glue, just got some, and i want to try using it to keep the trim in place
When I click on the link there is 2 different reds. What is the difference? I have a red dodge charger. So wanna make sure I get the one.
There are 2 different reds. One is pure red and the other has a bit of a metallic anodized look to it.
Shits the hardest thing on earth to install but worth it maybe
Tried to put it on my Kia Rio. There’s no gaps to put it anywhere but the head unit but it’s so damn tight it won’t go in 😓
had the same problem with my girlfriend
Where is the link? Looks awesome but
In the description of the video! Click it and go down to the link.
😂 I found it!
Looking good , but why not just put EL WIRE it woulda been more work but way better cause you can turn it on when dard for a even better look ... just my 2-cents .🍺
some EL wire looks far worse than this when non-lit but they pop when in the night.
Mine doesn't hold. I wish they just made a sticker
Red seatbelts belts on EBay for like $35.
Link
came looking for silver and found gold.
broooooo..... you collect garbage in yur cup holders....yuck. LOLz, good vid.
12 dollars ,what a rip off ..2 dollars in china ..same 5meters
Most everything is chinese made but you also “get what you pay for “
it matches the cheap Dodge look!
Jealous much ?
Jesus Christ loves you
so dodgy
Thanks for the Video but only on a Dodge it will go on so easy (Cheap Material) #Chevy
Congratulations you have just made a nice looking interior look cheap and nasty. Just my opinion.
Lol you have bad taste that’s all