Overpriced razer products? Terrible software? The return of everyones' favourite laptop coorel?! I swear to god if this video shows Dawid's famous unrivaled professionalism (particularly in regard to note-taking), I will enter a state of animalistic lust that i may never recover from
I have the exact cooler you showed at around 1:45. It's quiet, very quiet, even at highest settings and it really works. Oh, it cost me $29 US last year.
Off topic, but I really appreciate the gains you put on your audio. Too many channels turn them down. My ears are as old as the gum under the table at your local Denny's. It makes it easier to hear without turning my volume all the way up.
Back when i was going to lan party with my rog laptop, the trick was to put it on four soda can and play with an external keyboard and mouse. Never overheated.
Try those little rubber sticky pads on the legs. Should help with the slide and also the resonance. It sounds like a LOT of the noise on both is due to INTERNAL resonance though. It might be a pain, but it would be really interesting to see what's inside to see if you can add sound deadening.
I built such a cooler myself with a 3D-Printed stand and two 140mm Noctua fans at work to cool our Surface 7 notebooks. It works amazing there since in our production hall we have quite toasty temps in the summer and the chassis of the Surface is made from aluminium so you can get rid of a lot of additional heat that way. Having said that these Surface tablets are not made for automation software development because the internal cooling system is way to weak to support high load on the cpu over extended ammounts of time...
I am looking to buy one of these with my next paycheck since my laptop does get rather hot (and has massive vents bellow it so this should help), but going to watch this video first, great timing hah.
I have basically the same exact product, except I bought it like 3 years ago and it was some generic company. Same foam sealing surface, same large/high volume fan, even had manual fan speed control and extra USB ports. Think it cost like 45$.
I have the smaller version of the llano you shown and it works great on the asus tuf a16 with the 7845hx and 4070 dropped 10°c on the lowest setting and nvme temperature dropped by a few degrees aswell well worth it
I once connected the cpu and gpu with the underside of my razer, and then added a big heatsink with thermal paste and a laptop cooler. I was able to stop the thermal throtteling...
5:00 "This cooling is effective" As the shot shows the CPU throttling the entire time to stay cool. It's not the fans keeping it cool, it's the processor shooting itself in the foot XD Lame
I have quite a few Razer peripherals, and one thing is for certain. material, and build quality in their products has definitely gone way down hill. Case in point is my Blackwidow X tournament edition 80% that I bought a good 8 to 10 yrs ago, vs. the new Blackwidow V3 80%. The older Blackwidow X TE's chassis is made of aluminum, everything feels good and the lights were almost too bright. Fast forward to the V3, and the chassis is plastic, it's lighter, and the lights are way more dim. They cost roughly the same as well. You can plainly see, and feel the drop in quality. As a result I don't think I'll be buying anymore Razer products. They're just not worth it anymore.
i cant say much lol i spent 80 on a llano cooler.......but i can tell you that it freaking helps alot for my wifes Asus Strix 15.6 laptop...even on the lower 500 setting it makes a world of difference.
That looks like a bootleg version of a premium laptop cooler that RANDOMGAMINGINHD showed in his channel somet time ago. The one he showed had controls and shit and it actualy worked, albeit also expensive. EDIT: Oh i think it was actualy the 2nd one you got .. that looks nearly identical to the one RGIHD did use.
Yeeah, no, razer did no market research with this one. Fan tray solution i have costed me £20 (GBP), which is also foldable; once irl allowed me to move back to desktop, i shoved away into random crack between furniture and wall (cheaper, same results, way easier to store)
I’m happy you clarified how normal it is to be aroused by the level of professionalism 😮💨 I was worried while eating breakfast that having an egg burrito and watching Dawid does tech stuff, this might not be the appropriate time for a bone dog 👀. But luckily I seem to be in the majority so continue 💁♂️
LMAO jet turbine indeed, even on a tiny Zephyrus G14. Cooling is my top priority when laptop gaming, so I just ramp up fans to 100%. Noise cancelling headphones are my favorite investment. Sorry neighbor...
ive never had one of these cool any of my laptops. 200 dollars? youre better off getting a better laptiop and letting it be hot sometimes.. these newer laptops are starting to keep them a lot cooler nowadays anyway.. for that price i dont think this will sell
$100 -$200 for a laptop cool HARD PASS they look nice and RGB but pretty much ANY laptop cooler or object you can tuck under the back is good enough to get good enough cooling Just go to a local thrift store and pick up one for a few bucks call it a day! I have an old Lenovo that someone boot looped with a Win10 install and even though I revived it and the fan works there is NO fan control and no way to get the fans to 100% no matter how hot it gets but add a BASIC rando laptop cooler with A SINGLE small fan and it run great at healthy temps so all this over engineering at MASSIVE cost is just NOT worth it unless there is something SERIOUSLY wrong with your laptop IE dead fan or something and in that case the $200 might be better spent fixing it
Yes it is overpriced Razer Crap. But Dawid took their money so he will put the best spin on it he can. That Foam definitely WONT get all crusty and flaky and ruin the whole purpose of the device in 9 months or less. NO WAY. Razer updating mouse drivers more often than Microsoft offers me windows 11
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Overpriced razer products? Terrible software? The return of everyones' favourite laptop coorel?! I swear to god if this video shows Dawid's famous unrivaled professionalism (particularly in regard to note-taking), I will enter a state of animalistic lust that i may never recover from
This this is why I go to the comment section. I love the way you phrased it so much.
"It doesn't cost $150 to prop it up"
Speak for yourself, I prop up all my laptops with rare earth metal cubes.
I have the exact cooler you showed at around 1:45. It's quiet, very quiet, even at highest settings and it really works. Oh, it cost me $29 US last year.
2:14"If only it's fan could filter out razer's bloatware" LOL
as always the GOAT of descriptions
I use that same model of Legion laptop and I use a Klim cooler (with the silicone gasket). It fits like a glove and helps a ton with the thermals.
Writing things down, official this has become a science channel.
Coorel makes a comeback.
No matter how bad your day is, just remember you’re not my friend who bought one of these for his MacBook Air….
@9:49 this alone gives it the win over the razor one
Originally found this channel and kept watching for the ridiculous experiments. Now it's a legit hardware review channel. Good on ya
he will continue to do both, Dawid is just interested in all kinds of stuff.
Off topic, but I really appreciate the gains you put on your audio. Too many channels turn them down. My ears are as old as the gum under the table at your local Denny's. It makes it easier to hear without turning my volume all the way up.
I want this somehow built into the seat of my chair
so you want air being pushed into your lower parts? do not sit on a fan
Imagine cutting the cheese while sitting on a chair like that
Adding "Gaming" on stuff usually turns on gamers, like how adding "Military Grade" turns on weekend warriors.
It sells thing well.
you forgot the letters rgb in the front, it will sell double well
but it doesnt say ai anywhere, so it wont sell as well as other ai products :D
Both sound the same as shit with AI in the name for me, all valueless slop.
Its hilarious cause military grade means the cheapest we can make it and it still work... not made with professionals in mind lol
In the what if scenario: "Propped up version, but with a slight inclined Noctua fan under, I wonder what would be the results?"
Back when i was going to lan party with my rog laptop, the trick was to put it on four soda can and play with an external keyboard and mouse. Never overheated.
i bought one from aliexpress for $50 and made video on it too. it's the same as this razer cooler. droped temp by -20 degree c
I misread your comment the first time, i thought it dropped temp to -20 degrees celsius 😂
Is it the fl08. I have the same
Try those little rubber sticky pads on the legs. Should help with the slide and also the resonance. It sounds like a LOT of the noise on both is due to INTERNAL resonance though. It might be a pain, but it would be really interesting to see what's inside to see if you can add sound deadening.
I built such a cooler myself with a 3D-Printed stand and two 140mm Noctua fans at work to cool our Surface 7 notebooks. It works amazing there since in our production hall we have quite toasty temps in the summer and the chassis of the Surface is made from aluminium so you can get rid of a lot of additional heat that way. Having said that these Surface tablets are not made for automation software development because the internal cooling system is way to weak to support high load on the cpu over extended ammounts of time...
That sounds expensive
When eating a jar of mayo with a fork?
Mayo taste like heaven🤤🤤
Just prop it up. Thanks for confirming it is the best value option!
Love your videos and your style of humor 💖
I found a nine dollar aluminum laptop stand on Amazon that gets the same results.
I used an old broken mouse to prop up my laptop and achieved similar results.
i doubt it, it doesnt have rgb
Doubtful, doesnt have rgb
I've always been an advocate for the underdog. Just because it doesn't have the big boy branding doesn't always mean it's crap
It may hav3 rgb but there are no hexagons
Gamer gons
0:44 goated intro music
I'm watching this on my Razer Edge for extra immersion
This is probably as close to "LINOOOOOOODE" as we're gonna get these days. :(
I am looking to buy one of these with my next paycheck since my laptop does get rather hot (and has massive vents bellow it so this should help), but going to watch this video first, great timing hah.
The Llano sounds more like a running fan to me (like an electrical motor buzz), while the Razer it's more of the sound of air blowing by.
Price to performance isn't anywhere close to just sticking something under to prop up the laptop 🤣
I have basically the same exact product, except I bought it like 3 years ago and it was some generic company. Same foam sealing surface, same large/high volume fan, even had manual fan speed control and extra USB ports. Think it cost like 45$.
it didn't have razer logo
I have the smaller version of the llano you shown and it works great on the asus tuf a16 with the 7845hx and 4070 dropped 10°c on the lowest setting and nvme temperature dropped by a few degrees aswell well worth it
You have yet to review the Lliano
Guys get the GT500-600 or the Llano coolers instead if people need one of these.
I once connected the cpu and gpu with the underside of my razer, and then added a big heatsink with thermal paste and a laptop cooler. I was able to stop the thermal throtteling...
This video couldn't be any coorel if he tried.
Omg edit, I'm watching the video on the same laptop the coorel is being tested on lol.
the coorel! its back!
weird episode of Delayed Input.
We need more laptop coorel tests
Surely "ICE COOREL" isn't them screwing up the L and R Hahahahah🤣🤣🤣🤣🤣
can you do a review on the new razer blade 16?
0:00 white goblin starts ranting
💀
LLANO one being not much worse is pretty interesting
I noticed your Lenovo didn't pass the "one hand open test" at 9:40 What's real anymore? How can I know?
I would have likes to see tests with the foam removed to see it it even has any real effect.
5:00
"This cooling is effective"
As the shot shows the CPU throttling the entire time to stay cool. It's not the fans keeping it cool, it's the processor shooting itself in the foot XD
Lame
I wonder how many times Dawid has set off the smoke detectors in his new studio...
I have quite a few Razer peripherals, and one thing is for certain. material, and build quality in their products has definitely gone way down hill. Case in point is my Blackwidow X tournament edition 80% that I bought a good 8 to 10 yrs ago, vs. the new Blackwidow V3 80%. The older Blackwidow X TE's chassis is made of aluminum, everything feels good and the lights were almost too bright. Fast forward to the V3, and the chassis is plastic, it's lighter, and the lights are way more dim. They cost roughly the same as well. You can plainly see, and feel the drop in quality. As a result I don't think I'll be buying anymore Razer products. They're just not worth it anymore.
7:47 but yk what else is massive?
Gen z kid
You'd think Razor would watch some of these videos before embarrassing themselves.
tbf the design is very human
coorel joke never dies
i cant say much lol i spent 80 on a llano cooler.......but i can tell you that it freaking helps alot for my wifes Asus Strix 15.6 laptop...even on the lower 500 setting it makes a world of difference.
Undervolt plus propping up it is then.
How long will that foam last?
I have an MSIGP65 Leopard laptop and it melted the plastic on my cheap laptop cooler
My gaming laptop is completely silent with superb temps before I switch it on.
That looks like a bootleg version of a premium laptop cooler that RANDOMGAMINGINHD showed in his channel somet time ago.
The one he showed had controls and shit and it actualy worked, albeit also expensive.
EDIT: Oh i think it was actualy the 2nd one you got .. that looks nearly identical to the one RGIHD did use.
we replaced rgb with ai, this product is outdated already
Yeeah, no, razer did no market research with this one. Fan tray solution i have costed me £20 (GBP), which is also foldable; once irl allowed me to move back to desktop, i shoved away into random crack between furniture and wall (cheaper, same results, way easier to store)
i got a similar one, to ~50% of the leno, a AICHESON . it cools great. but the buttons are hard to press. i do fear; it will brake easily.
I’m happy you clarified how normal it is to be aroused by the level of professionalism 😮💨 I was worried while eating breakfast that having an egg burrito and watching Dawid does tech stuff, this might not be the appropriate time for a bone dog 👀. But luckily I seem to be in the majority so continue 💁♂️
When you say "cooling" i can feel some indian reviewer vibes. Ahahaha.
Its super weird hearing the music PokeRev uses, in this video lmao
well time to make something to prop up the laptop out of lego pieces in the house ..
NGL, I use Legos under my projector to get the angle right 👌
LMAO jet turbine indeed, even on a tiny Zephyrus G14. Cooling is my top priority when laptop gaming, so I just ramp up fans to 100%. Noise cancelling headphones are my favorite investment. Sorry neighbor...
I don't not miss gaming on a laptop
Effectivity? Is that a word? How about effectiveness?
Coor video!
non-removable usb cable is a crime
Dawid, where is the smoke coming from? I am worried for you!
Looks like the IETS GT500 but way more expensive
ive never had one of these cool any of my laptops. 200 dollars? youre better off getting a better laptiop and letting it be hot sometimes.. these newer laptops are starting to keep them a lot cooler nowadays anyway.. for that price i dont think this will sell
this is def not made by razer, i think they OEM since i saw the exact cooler (how its build etc.) on like alibaba for idk 9-15$?
hi dawid
on aliexpress same exact product i paid 35 bux
When are they not... and that's with me using a Razer Naga Mouse, the charging dock is ridiculously overpriced.
The design is almost good.
I got a cheap knock off cooler and it works fine. I think it was maybe 15 bucks.
Razer reduced to this, well given they couldnt make/contract scrollwheels or mouse switches to save their lives; good.
why he call it coorel
"Coorel"
$100 -$200 for a laptop cool HARD PASS they look nice and RGB but pretty much ANY laptop cooler or object you can tuck under the back is good enough to get good enough cooling Just go to a local thrift store and pick up one for a few bucks call it a day! I have an old Lenovo that someone boot looped with a Win10 install and even though I revived it and the fan works there is NO fan control and no way to get the fans to 100% no matter how hot it gets but add a BASIC rando laptop cooler with A SINGLE small fan and it run great at healthy temps so all this over engineering at MASSIVE cost is just NOT worth it unless there is something SERIOUSLY wrong with your laptop IE dead fan or something and in that case the $200 might be better spent fixing it
Hey
still waiting for a Razer toilet seat
They took this idea XD
Design*
Does it have AI in it?)
Will this not push your laptops fans faster than they’re rated for?
ErM acTuALly ThiS wAs DEsignEd For rAzEr ProdUcTS
Pen and Paper? So barbaric...
Llano should be pronounced with a Welsh accent.
It's just an exact copy of an already expensive laptop cooler on amazon and made slightly more expensive because Razer. 🤣🤣
I use a RTX 5090 to prop up my laptop... I think the Razer might be cheaper. 😁
It kinda look like a stove to me
Solution: Buy a desktop!
Another razer overpriced shit
supel dupel coolel
Don't talk to me or my coorel ever again 😭
RGB but not hexagons😭
Yes it is overpriced Razer Crap. But Dawid took their money so he will put the best spin on it he can. That Foam definitely WONT get all crusty and flaky and ruin the whole purpose of the device in 9 months or less. NO WAY. Razer updating mouse drivers more often than Microsoft offers me windows 11
best gaming machine is my 2005 pc 🗣️🔥🔥