Thank you very much! Some painters need fancy equipment. And it's not a diss to them but this is were you separate the boys from the men. This shit is in my blood. Probably literally 😂😂🫡💪🏼
I actually have one of those. Its like a deluxe premium style R500. With me doing mostly rust repairs now with panel painting, I'm using my turbine guns most days. Those are ultra-low fog! Seriously low low fog. Low psi, high volume of warm dry air. Zero water,moisture,oil contamination, no line filters no nuthin. And less paint used. Also been using fast dry production clear coats to lock out dust fast. Like mobile refinish clears from Speedokote. But it don't matter what I use. I still watch Trigger spray. Big compressor, small compressor, it's all sorayin'; Spray-on Trigger, Spray-on!!
Thank you Big Bear. Man I really need to try one of them turbines. Can you get a flat slick finish like out of a normal spray gun? You really have me curious. I need a company to send me one 🫠
@@thetriggerman954 you can get a nice finish with a 5 or 6 stage turbine and a good turbine gun. Its different. I spray clear wirh a 1.0 needle set. Sounds tiny, but with the fujispray t series gun, its not. Big fan. Really shines doing all kinds of base coat, pearl, chameleons, metallics. It works for me and my environment and situation.
That’s quite a difference on the overspray for sure Trig….In fact as a long time subscriber I would go so far to say it is better than most of the guns in that aspect! Realizing many of the guns you use do have larger spray patterns and put a lot more material on the work. Great video as usual !! Very helpful I’m sure to many.
I bought that gun based on one of your videos, also have an R500, and an Iwata for primer.Haven’t sprayed anything yet with them. I’m going to be painting a 66 El Camino. My younger brother was helping me get back into painting but he suddenly died two months ago. I taught him 40 years ago. Anyway I’m learning a lot from all your awesome videos and you are my #1 go to on RUclips. Keep up the good work teaching this old man how to do it.
@@thetriggerman954 Good morning, I sprayed yesterday in my "Shed". Seeing a ton of trash, any idea what the wed sand and recoat time is? Or just unmask and let it sit, bother me for a week? LOL Thanks man, videos are so helpful. Upol clear
I actually bought the Inkocraft gun a few weeks ago off Amazon. $109 shipped. Comes with 3 tips: 1.3, 1.5 and 1.7. Comes with a water separator , guage and cleaning parts. Looking forward to test it out. Hard to break the habit from using a Binks 19 siphon feed gun for years. Great gun too. Lays paint and clear very good. Look forward to trying out my new Inkocraft gun. It's called the Drizzle gun.
*_I own a SATA-Jet and an Iwata front and center among other top brands and I use them ALL occasionally but day in day out it's my bread and butter good old fashioned 175 dollar DeVilbiss ALL-Purpose Gun that pays the bills that dang thing will spray anything and everything very very well ... and it's fast too. As far as speed goes like in the production line its the fastest gun I own. Kinda funny I'm an American but use German Japanese and French Paint Pistols... hahaha LOL_*
Definitely helps, thanks. I have an A610 kit, basically an R500 with some extra nozzles, but it gets too foggy in my home garage when I'm spraying clear. This one would be great as a dedicated clear gun.
Just Got both the Mini gun and the Pro gun from Porphus....They are no joke. Excellent quality. IMO just as good as any pro line gun build. Cant wait to try them out. IMO if your doing work at your house you really NEED a 5 Hp 60 gallon compressor. Just to sand and grind.
It seems like a lot of guys are using electric or battery operated sanders then using the smaller compressor to spray with the LVLP. I personally would just have a larger compressor when I spray from home I had a seven horsepower 60 gallon devilbiss compressor. These guys nowadays are finding a way to make shit work with a little bit of nothing lol
@@thetriggerman954 yea your pretty old school like me. I think I got a few years on you though. yea Would LOVE a 7hp...but I have had my old 5hp for 40 years. compressor head went out and I put a HF 3hp unit on top. still puts out cfm so It aint broke.....you know the rest.
Yea I use a 1.5 hp makita silent compressor for spraying ATM surrounds. and a Mini gun. which uses way way less air. I cant wait to try the 1.0 mini. looked like a wider fan. I did them with a .8 but it took a while. No overspray was the key there. Only dust. 1.5 is the biggest compressor I can transport and run with a small inverter generator
Out here calling myself the paint man hahaha more like the trigger man’s apprentice and PROUD to say that brother taught me more then any tradesman I’ve ever worked with
@@The_paintman you're still the Paint Man. We all start somewhere. Keep trying to perfect your skill and every day you'll get better. I'm 28 years in and still learning things from some of you guys. Bless up brother 🙏🏼♥️💪🏼
Love the video brother and I've been getting the shop ready to set up for paint work this winter for us over here! Keep it going brother your blowing up.
Okay I think I'm finally going to do that. I've gotten about 20 requests on people asking about cleaning a spray gun. I was putting it off for a while because I don't think it'll get many views but I'm going to go ahead and make one for you guys. So I'll try to get one up next week. But no later than the following week. I got you 🫡
Good tip on running the pressure higher on the LVLP's. I did not know that. I used to use an LVLP base gun and an LVLP clear gun about 10 years go, because I had a smaller 30-gal compressor. It was a lot easier on the compressor. I used those guns until they fell apart. Bought the set at Costco for $99. They don't make the brand anymore. Haven't used one since, because I have the big 80-gal monster in my new shop. But I have been looking into getting one for the big shoots, so my compressor doesn't have to work as hard. PLUS, I still have a mobile 30-gal compressor that I can roll around the shop and use in other bays, when my paint booth has a car in it and I just need to do a quick panel. So this would be a GOOD gun to try out for that!
@@colorbosscustomautobody8140 that's smart. Use the LVLP even if you have the big boy compressor so it doesn't have to work so hard. Never really thought about it that way. Save the wear and tear and still get a good finish. Then the little mobile compressor for when a car is in the booth roll it to a different bay. Sounds like you're pretty efficient over there. 💪🏼💪🏼💪🏼
Dayum that sprays nice. I used to paint, I used the suction guns with the pot underneath, I could slam a solid color real well but metallics were tough to get right. Good job thanks
Chill out MC Eiht!! 😂 Keep doing these videos brother, I've been painting for 23 years and you are the ONLY painter I subscribed to. I UNSUBSCRIBED to other painters channels because at some point they lost me. Real talk, some techniques you do are different but at the end of the day if you can deliver a job without sanding and buffing, YOU GOOD!
I appreciate that !! Most painters paint different especially after they've been painting over 20 years like you and me. It's like you do it so long to were you just break out of that robot stiff spraying habit into your own natural flow. Thank you again Arthur 👊🏼♥️
Triggerman! Would be forever in debt to you if you might do another D1 video before spring (I'm in Canada so will be forced to hold off on spraying until winter) - If you came by a job where you had to do primer/sealer, a metallic, and clear I would appreciate if you could tell the audience what pressure you have set and what tip you are using for each process. I am trying to do the bodywork and paint on a factory five cobra. Currently doing initial work, rage gold, block out. Hoping to get some feather fill on it in September for my first block out, then need 1 more warm day or get the heat working in the garage to do a second feather fill and block Then sealer/primer. Going with a metallic blue, a light blue. All advice and future videos are appreciated.
@@thetriggerman954 I haven't purchased the gun yet so maybe one of these you're reviewing will be a better option. I need to shoot featherfill, hoping this month, and believe I need a throw away cheapo gun for that. My blow up paint booth arrived yesterday but I think I'm going to plastic off the garage for featehrfill and save the booth for sealer/base/clear. Watching a couple vids a day and leaving likes. Thanks for posting .
@@runningman00900 the DV1 would be great for that size compressor. And it also has the low over spray I personally think it's ideal for your needs. But I'll get more vids on it soon.
Hello, it looks like you may use a different adapter and cup system then then options given when purchasing this gun... is what you use easier or better or it's just what you have?... Thanks!
Gonna by a D1 to spray my project truck ....going try and use a 27 gallon fortress compressor....no metallics ....just some pearls added to clear ....but i am going to paint hood ...tailgate...grill ...front bumper and the bed each in seperate sprays or one at a time ....then just the roof of the truck .......then finish the cab ...probably take multiple days .....
This gun spray great wish it would of have a bigger fan only issue if you spray a hood with it and dont have a good technique it will leave tiggerstripes because of the small fan pattern but other than that it leaves a great finish with clearcoat
@thetriggerman954 yooo!! Trigerman thanks for replying learning a lot from you channel please!! If you have a chance to do a video with the drizzle and metallic paint on a hood that would be awesome !! Thanks for sharing your years of experience with us
@@alexrb4363 You are more than welcome man. And okay I'll try to get that up for you I have a video with the drizzle spring metallics but I don't think I have one on an actual hood but I'll get that going for you. Appreciate you
Cool tech! I could see the many uses of that. I have to spray a mini gun with almost no fluid and low pressure to try to not fog out the finish line, even with the filtered fan sucking it out… I feel bad but it’s what the managers want. That gun might work better.
@@thetriggerman954 I don’t pay for the tools at my work so I doubt they will won’t to switch even if finishers complain. 🤷🏻♂️ only reason sata is the brand used is because the old lead painter only wanted sata and now my boss thinks it’s the only gun brand we can use.
Hey Trigger, it must be Saturday as my man Trigger is back in the lab🧐the Honda came out looking mint as all your jobs do bro the D1 laid the base and clear flawlessly and as you said it's a true LVLF gun👌I tried putting the code "I forgot" in my paint scheme but it told me I was an Idiot🤦♂these AI driven programs are a bit cheeky😲😅John UK
Lmao my memory isn't just what it used to be John. 50 is around the corner for me 🫠🥹 hope you have a blessed weekend my man. Thank you for tuning in 💪🏼♥️
Nice! that looks like what i need. How does it do with primer or sealer? that red and black panel in your intro is interesting. How did you do it and how can i get a still picture of it?
@@Pallidus_Rider I don't prefer it out of almost 200 videos this is the second video that I sprayed like that. And it's basically to show the are many different ways to spray. It's not my default spray technique. Just like spraying panel by panel or walking the side It all gets the same results just different ways to get there.
@@Outlaw_kris no this one is the best for it amzn.to/3XIQVhM I have a few videos up on it. Awesome gun no fog and great results I used a small compressor in the videos.
@@thetriggerman954 I was just checking your links out to Amazon for the spray gun and respirator you used in the video. I will probably go with a 1.5 mm nozzle so I can spray single stage, and thinned out Rust-Oleum. Sure miss Dupont Centari acrylic enamel.
@@thetriggerman954with the porphus does it have less fog like the Drizzle? I have plenty of air for any gun, but no booth so I'm wanting a gun that has less overspray fog. I'm not really worried about the CFM or price....just that it lays out a nice finish and has reduced fog.
Thank you Triggerman. Another lesson learned. I m gonna try this gun . Good deal 3 tips on the deluxe setup. . Question. What compressor do you recommend CFM wise for professional use? Keep on triggering!!!
I personally like Ingersoll Rand air compressors. And you should be good with a 60 gallon. Something like this and you'll never have issues amzn.to/4cCHINK
Would that gun give off less fog than the black widow HTE? Or any other gun aorund that price. Need something that wont piss the neighbors off lol. Keep up the videos bro
@@clayp.6802 yes this gun gives off a fraction of the over spray as the black widow. Especially if you use the link in the description it's tuned up for even less overspray
I’ve sprayed with this gun for awhile maybe 200+ cars and after awhile just turned to garbage fan pattern would constantly change no matter what this and the a610 both terrible after some abuse. Kiawami 4 is the best budget gun by 1000% along with black widow 2.0
@@SpeedGasmEvo9 bottom of the barrel in my opinion. If it doesn't look good don't think it's you as a painter. That stuff is extremely cheap and harder to make it look good. Just my honest opinion
I have the r500 already and agree it is a fog machine lol. I already have good guns and I'm tempted to try this gun but you said it's a lvlf. The only innokraft d1 I see is a lvlp. Am I missing something?
Lol ok I just wanted to be sure. Now I'm gonna sit back and read some of the comments of all the painters you pissed off by not doing the R and I. Lmao. By the way I just want to thank you for being real on your videos. There are so many "painters" on RUclips that sound like a robot when they shoot their videos. It really bugs me, thank god you don't do it.
@@davekennedy-ex6qk Never, I've made several videos saying NOT to add reducer unless The manufacturer calls for it. If it says reducer is part of the mixing ratio then I'll add it.
Hi TriggerMan, How do you like the face mask respirator? I have the half mask but thinking about the full mask to cover my eyes. Those paint fumes are bad and I'm sure they are not good for ones eyes. Thanks.
I'm happy with it. I use a cheaper mask just be sure to get good 3M filters. Took a few weeks to get use to now It's easy breazy. Also be sure to get the replaceable lens sheets
@@snapfly7 The biggest difference is the amount of overspray they put off mostly everyone that commented backs up what I'm saying and they all said that it produces a lot of overspray / fog in the air The D1 does not produce nearly half as much as the r500. So there is a huge difference That dude doesn't know what he's talking about.
Everyone has been telling me it's dying back on them. I get tons of messages on here and private say they stop using it. And to be honest I don't want to create more work for myself if that stuff is not going to work. I've had at least 30 people tell me they are switching from it.
Hey trigger, I purchased the lt100 concours (Eastwood) lvlp. You think a 27 gal 5.1 cfm at 90 compressor would do ok spraying 1c8 paint code. I’m am a novice never sprayed before so anything advice you give is much appreciated.
@@fluorescentmug8333 Guess that should be fine with a 27 gallon compressor. That's pretty much the same gun as the r500 and I did nice size jobs with this 13 gallon compressor so you're a little over double than what I have so you should be fine.
@@michaelchaney3101 welcome to the channel. When you say blending two different colors you mean like blending two completely different paint codes into one? If so no I don't have anything like that on my channel. What would be something that you would use that for? Just curious
TRIGGERMAN... YO... TRIGGERMAN?!? NO freakin bullshit... NO David Copperfield effects... NO mi ni mo Yes Mam... just a wet garage, fresh well mixed paint, 13 gallon air pump, great preparation (85% of the work), right hand dancing valse with that "LVLGBT Q U NO FOG GUN" inoKRAFT... SMOOTH... SLICK... DOPE PAINT JOB! Keep them coming and just a note... envy green-trolls grey... Let those Shrecks bitching!!! Big shout out from the middle of the Atlantic!!!
@@thetriggerman954 It's crazy these LVLP guns run at such a high PSI. A lot of other vids I've seen on them run them under 20 PSI. All I know is I'm sick of orange peel in my clear! 🤣
That gun is the R500 but with a different body If you don't believe me, put the nozzles, needles and nozzle from one to the If you don't believe me, put the nozzles, needles and nozzle from one to the other😎
@@thetriggerman954 Check them out well, but that gun, the aeropro A610 la rongpeng And the Yuan tie yt160 are the R500 lvlp, I have all the only thing that changes are the manufacturing qualities
Your narration as you’re spraying is hilarious. Always puts a smile on my face. 😆👏
@@air_cooled_andy good to hear. I'm glad you enjoy it Andy ☺️
Silver is the best test EVER......no faking it!!!!
For real man. Can't hide shit with silver lol
Gotta love that low fog ... looks like it sprayed nice on that baby compressor ... great video as always ... stay safe Trigger ...
Thank you Joe yeah man it was a breeze on that little feller 😂👊🏼
This gun is exactly what I was looking for! I ordered it as soon as your video finished!! Thanks again for another great and informative video!!!
@@cacooke77 you got it Chris, you should be happy with the gun. Keep me posted, let me know how it works out for you ✊🏼
@@thetriggerman954 Will do. I'll be sure to let you know how it all works out.
"Paint code is...I forgot..." - love it!
@@kz6fittycent 😂😂
Great job as usual! Your results with equipment that others would turn their nose up at really showcases you painting ability.
Thank you very much! Some painters need fancy equipment. And it's not a diss to them but this is were you separate the boys from the men. This shit is in my blood. Probably literally 😂😂🫡💪🏼
I actually have one of those. Its like a deluxe premium style R500. With me doing mostly rust repairs now with panel painting, I'm using my turbine guns most days. Those are ultra-low fog! Seriously low low fog.
Low psi, high volume of warm dry air. Zero water,moisture,oil contamination, no line filters no nuthin. And less paint used.
Also been using fast dry production clear coats to lock out dust fast. Like mobile refinish clears from Speedokote.
But it don't matter what I use. I still watch Trigger spray. Big compressor, small compressor, it's all sorayin'; Spray-on Trigger, Spray-on!!
Thank you Big Bear. Man I really need to try one of them turbines. Can you get a flat slick finish like out of a normal spray gun? You really have me curious. I need a company to send me one 🫠
@@thetriggerman954 you can get a nice finish with a 5 or 6 stage turbine and a good turbine gun. Its different. I spray clear wirh a 1.0 needle set. Sounds tiny, but with the fujispray t series gun, its not. Big fan. Really shines doing all kinds of base coat, pearl, chameleons, metallics.
It works for me and my environment and situation.
That’s quite a difference on the overspray for sure Trig….In fact as a long time subscriber I would go so far to say it is better than most of the guns in that aspect! Realizing many of the guns you use do have larger spray patterns and put a lot more material on the work. Great video as usual !!
Very helpful I’m sure to many.
@@poman8772 good to hear man. Glad it helps. Yeah man there was minimal spray in the air for sure.
I bought that gun based on one of your videos, also have an R500, and an Iwata for primer.Haven’t sprayed anything yet with them. I’m going to be painting a 66 El Camino. My younger brother was helping me get back into painting but he suddenly died two months ago. I taught him 40 years ago. Anyway I’m learning a lot from all your awesome videos and you are my #1 go to on RUclips. Keep up the good work teaching this old man how to do it.
Welcome back to the paint game. And I'm sorry for your loss. 🙏🏼♥️
@@thetriggerman954 Good morning, I sprayed yesterday in my "Shed". Seeing a ton of trash, any idea what the wed sand and recoat time is? Or just unmask and let it sit, bother me for a week? LOL Thanks man, videos are so helpful. Upol clear
@@movaughn20 Look on the paint brand spec sheet for the paint you are using. You using nason, axalta, omni, PPG?
Love it when you try out the diy guns and products. Thank you Trigger!
You got it man. Glad you enjoyed
I actually bought the Inkocraft gun a few weeks ago off Amazon. $109 shipped. Comes with 3 tips: 1.3, 1.5 and 1.7. Comes with a water separator , guage and cleaning parts. Looking forward to test it out. Hard to break the habit from using a Binks 19 siphon feed gun for years. Great gun too. Lays paint and clear very good. Look forward to trying out my new Inkocraft gun. It's called the Drizzle gun.
@@georgepetrillo7316 cool I'm sure it'll be an easy transition from the Binks 😎
Another awesome video. Still deciding which spray gun to try as my first one. Leaning towards this D1. Thank you Trigger Man
@@ailaz1 in think that's a great option for you.
*_I own a SATA-Jet and an Iwata front and center among other top brands and I use them ALL occasionally but day in day out it's my bread and butter good old fashioned 175 dollar DeVilbiss ALL-Purpose Gun that pays the bills that dang thing will spray anything and everything very very well ... and it's fast too. As far as speed goes like in the production line its the fastest gun I own. Kinda funny I'm an American but use German Japanese and French Paint Pistols... hahaha LOL_*
Definitely helps, thanks. I have an A610 kit, basically an R500 with some extra nozzles, but it gets too foggy in my home garage when I'm spraying clear. This one would be great as a dedicated clear gun.
The drizzle D1 is an LVLP that has waayyy less fog. Might want to give it a try
Not really a true lvlp looked on a lot of websites say 11.7cfm something like that
Just Got both the Mini gun and the Pro gun from Porphus....They are no joke. Excellent quality. IMO just as good as any pro line gun build. Cant wait to try them out. IMO if your doing work at your house you really NEED a 5 Hp 60 gallon compressor. Just to sand and grind.
It seems like a lot of guys are using electric or battery operated sanders then using the smaller compressor to spray with the LVLP. I personally would just have a larger compressor when I spray from home I had a seven horsepower 60 gallon devilbiss compressor. These guys nowadays are finding a way to make shit work with a little bit of nothing lol
@@thetriggerman954 yea your pretty old school like me. I think I got a few years on you though. yea Would LOVE a 7hp...but I have had my old 5hp for 40 years. compressor head went out and I put a HF 3hp unit on top. still puts out cfm so It aint broke.....you know the rest.
Yea I use a 1.5 hp makita silent compressor for spraying ATM surrounds. and a Mini gun. which uses way way less air. I cant wait to try the 1.0 mini. looked like a wider fan. I did them with a .8 but it took a while. No overspray was the key there. Only dust. 1.5 is the biggest compressor I can transport and run with a small inverter generator
Out here calling myself the paint man hahaha more like the trigger man’s apprentice and PROUD to say that brother taught me more then any tradesman I’ve ever worked with
@@The_paintman you're still the Paint Man. We all start somewhere. Keep trying to perfect your skill and every day you'll get better. I'm 28 years in and still learning things from some of you guys. Bless up brother 🙏🏼♥️💪🏼
Dam good Job Trigger Man....Wanna wish You and everyone a very Happy Holidays
Thank you chuck. Happy new year bro. Have a blessed one brother 🥳🍾
Love the video brother and I've been getting the shop ready to set up for paint work this winter for us over here! Keep it going brother your blowing up.
Awesome! Thank you!🤜🏼🤛🏼
Glad you did this video. I have this gun and I was wondering what it’s capable of. Let me go practice.
It's capable of putting down a nice finish. You'll be happy with it for sure.
In the future could you please make a video on cleaning a spray gun showing your tech tips. Thank you. Enjoy your weekend!
I agree Trigger Man! I have also been meaning to ask you to please do a gun cleaning video. Thank you in advance!
Okay I think I'm finally going to do that. I've gotten about 20 requests on people asking about cleaning a spray gun. I was putting it off for a while because I don't think it'll get many views but I'm going to go ahead and make one for you guys. So I'll try to get one up next week. But no later than the following week. I got you 🫡
I'm on it 🫡
You could do gun set up/ spray pattern also in the same video and call it trigger man's class of bad *as paint jobs 💪🏾
That would be nice to see thank you
Thanks again bro.
Like your honest an straight forward review.
More than welcome. Glad it helps
@@thetriggerman954 please don't forget to mention the PSI it does help the newbies to have a good starting point
@@jeanclaudecocks7292 gotcha . That was at 35 psi
@@thetriggerman954 thanks you
TRIGGA MAN!!! YOU ALWAYS BE BRINGIN' THE TECH! What up broughammmmm! I kain't WAIT to see this shizzzznit! I'm finna watch!
Lol @brohammm 🤣
Good tip on running the pressure higher on the LVLP's. I did not know that. I used to use an LVLP base gun and an LVLP clear gun about 10 years go, because I had a smaller 30-gal compressor. It was a lot easier on the compressor. I used those guns until they fell apart. Bought the set at Costco for $99. They don't make the brand anymore. Haven't used one since, because I have the big 80-gal monster in my new shop. But I have been looking into getting one for the big shoots, so my compressor doesn't have to work as hard. PLUS, I still have a mobile 30-gal compressor that I can roll around the shop and use in other bays, when my paint booth has a car in it and I just need to do a quick panel. So this would be a GOOD gun to try out for that!
@@colorbosscustomautobody8140 that's smart. Use the LVLP even if you have the big boy compressor so it doesn't have to work so hard. Never really thought about it that way. Save the wear and tear and still get a good finish. Then the little mobile compressor for when a car is in the booth roll it to a different bay. Sounds like you're pretty efficient over there. 💪🏼💪🏼💪🏼
Dayum that sprays nice. I used to paint, I used the suction guns with the pot underneath, I could slam a solid color real well but metallics were tough to get right. Good job thanks
@@freeplayfrank7736 thank you Frank. I had a siphon feed back in the 90's too. I'd probably screw up a car today if tried to paint with one 😂
Good video. I need to replace my HF Purple gun. Will be spraying my first vehicle soon. I have only done trailers in the past.
@@charlesloar3210 trailers are good practice for the real deal 💪🏼
Wonderful job as always!
Thank you Odessa appreciate your continued support ♥️
Chill out MC Eiht!! 😂 Keep doing these videos brother, I've been painting for 23 years and you are the ONLY painter I subscribed to. I UNSUBSCRIBED to other painters channels because at some point they lost me. Real talk, some techniques you do are different but at the end of the day if you can deliver a job without sanding and buffing, YOU GOOD!
I appreciate that !! Most painters paint different especially after they've been painting over 20 years like you and me. It's like you do it so long to were you just break out of that robot stiff spraying habit into your own natural flow. Thank you again Arthur 👊🏼♥️
Triggerman! Would be forever in debt to you if you might do another D1 video before spring (I'm in Canada so will be forced to hold off on spraying until winter)
- If you came by a job where you had to do primer/sealer, a metallic, and clear I would appreciate if you could tell the audience what pressure you have set and what tip you are using for each process.
I am trying to do the bodywork and paint on a factory five cobra. Currently doing initial work, rage gold, block out. Hoping to get some feather fill on it in September for my first block out, then need 1 more warm day or get the heat working in the garage to do a second feather fill and block
Then sealer/primer.
Going with a metallic blue, a light blue.
All advice and future videos are appreciated.
I'll see what I can do for you. I have 3 guns I was sent out that I have to do a few reviews on but I'll try to squeeze one in for you 💪🏼
@@thetriggerman954 I haven't purchased the gun yet so maybe one of these you're reviewing will be a better option. I need to shoot featherfill, hoping this month, and believe I need a throw away cheapo gun for that. My blow up paint booth arrived yesterday but I think I'm going to plastic off the garage for featehrfill and save the booth for sealer/base/clear.
Watching a couple vids a day and leaving likes.
Thanks for posting .
@@runningman00900 what size compressor do you have?
@@thetriggerman954 a 20 gallon but I have access to bigger ones if needed.
@@runningman00900 the DV1 would be great for that size compressor. And it also has the low over spray I personally think it's ideal for your needs. But I'll get more vids on it soon.
The triggerman gods gift to spray painting
♥️
Great job, Trigger that compressor is quite I like that
Very quiet. I was surprised when I get heard it. Not bad at all. Thank you for watching Nigel
Hello, it looks like you may use a different adapter and cup system then then options given when purchasing this gun... is what you use easier or better or it's just what you have?... Thanks!
@@josephb3147 I use the devilbiss d cup system it's much easier just twisting and twist off
Thank u TriggerMan we appreciate u 💪🏽💪🏽💪🏽💪🏽
You got it man 👊🏼
Tell em where the trolls can go Triggerman! Keep up the awesome work.
Straight to hell and tell em Trigg sent you 😉😂😂 thanks you my man
Gonna by a D1 to spray my project truck ....going try and use a 27 gallon fortress compressor....no metallics ....just some pearls added to clear ....but i am going to paint hood ...tailgate...grill ...front bumper and the bed each in seperate sprays or one at a time ....then just the roof of the truck .......then finish the cab ...probably take multiple days .....
@@donaldwilcoxjr.5212 with that game plan u won't have any issues 💪🏼
This gun spray great wish it would of have a bigger fan only issue if you spray a hood with it and dont have a good technique it will leave tiggerstripes because of the small fan pattern but other than that it leaves a great finish with clearcoat
@@alexrb4363 I'll have to spray a good and see how it works. It didn't seem to be that small to me. Some times those huge fans cause problems too.
@thetriggerman954 yooo!! Trigerman thanks for replying learning a lot from you channel please!! If you have a chance to do a video with the drizzle and metallic paint on a hood that would be awesome !! Thanks for sharing your years of experience with us
@@alexrb4363 You are more than welcome man. And okay I'll try to get that up for you I have a video with the drizzle spring metallics but I don't think I have one on an actual hood but I'll get that going for you. Appreciate you
You just need to make sure you overlap 50% on you base coat and do 75% overlap on you clear coat.
Beautiful. Like it never happened!
What settings did you use to spray this. Looks amazing. I'm looking into buying this spray gun.
@@enodohtem 35-37psi full fan and the fluid was 1 turn in from wide open.
Cool tech! I could see the many uses of that. I have to spray a mini gun with almost no fluid and low pressure to try to not fog out the finish line, even with the filtered fan sucking it out… I feel bad but it’s what the managers want. That gun might work better.
Might work for you. I'm sure it won't last as long as your Sata jet you use now. But they are cheap enough that you can replace it every year
@@thetriggerman954 I don’t pay for the tools at my work so I doubt they will won’t to switch even if finishers complain. 🤷🏻♂️ only reason sata is the brand used is because the old lead painter only wanted sata and now my boss thinks it’s the only gun brand we can use.
What's up triggerman..if you had to pick 1 lvlp gun for metallics, pearl and so on..which one would you go with?
This one here. The drizzle D1 for sure.
Hey Trigger, it must be Saturday as my man Trigger is back in the lab🧐the Honda came out looking mint as all your jobs do bro the D1 laid the base and clear flawlessly and as you said it's a true LVLF gun👌I tried putting the code "I forgot" in my paint scheme but it told me I was an Idiot🤦♂these AI driven programs are a bit cheeky😲😅John UK
Lmao my memory isn't just what it used to be John. 50 is around the corner for me 🫠🥹 hope you have a blessed weekend my man. Thank you for tuning in 💪🏼♥️
Nice! that looks like what i need. How does it do with primer or sealer?
that red and black panel in your intro is interesting. How did you do it and how can i get a still picture of it?
You can watch the full video then just pause and screenshot..it's the new Sagola spray gun video. That fender is on the thumbnail
Curious why you prefer vertical then horizontal spray pattern and not the X pattern for metallic 🤔💭
@@Pallidus_Rider I don't prefer it out of almost 200 videos this is the second video that I sprayed like that. And it's basically to show the are many different ways to spray. It's not my default spray technique. Just like spraying panel by panel or walking the side It all gets the same results just different ways to get there.
I was wondering about that handle ! Fine line tape faked me out . LMAO !
😂 I'm sure glad I don't have to mask these cars. I wouldn't have the patience. I'm only here to SPRAY 🫠🤦🏼♂️💪🏼
I’m wanting to know if this is the best gun available for the small
Compressors I’m almost ready for paint on my project
@@Outlaw_kris no this one is the best for it amzn.to/3XIQVhM
I have a few videos up on it. Awesome gun no fog and great results I used a small compressor in the videos.
@@thetriggerman954 thanks should I buy 2 one for clear one for base? Our is it fine to just clean it
@@Outlaw_kris it's fine to just clean it. Don't need 2 unless you are going to be priming. You don't want to prime or if the same gun
@@thetriggerman954 thanks man I have a primer gun. I really appreciate you taking the time to guide me the correct way.
@@Outlaw_kris anytime 💪🏼 good luck 🤞🏼 keep me posted
My old Binks #7 must be high volume, Extra-extra high fog. Looking to replace it with something that pumps out less over spray and saves paint.
@@dand3975 well here is your gun. I had that binks and I know what you mean. This will be 90% less fog
@@thetriggerman954 I was just checking your links out to Amazon for the spray gun and respirator you used in the video. I will probably go with a 1.5 mm nozzle so I can spray single stage, and thinned out Rust-Oleum. Sure miss Dupont Centari acrylic enamel.
😂😂😂😂 @2:21 I love the voice over it brings a twist to the video.
@@emmanuelhud1 thanks man glad you enjoy them. Stay tuned for more every week 💪🏼👊🏼♥️
Trigger back with the Micky mouse guns 😂, nice video as always
@@stipq076 🐭🐭🐭
Thanks for another awesome gun down review 🔥
You got it man. Glad you enjoyed. Thank you for watching 💪🏼🫡
Trigga, how do you not get any fish eyes with no water/oil separator? That was a nice result.
@@andrewbodey5025 I don't know man. I never have. Maybe you guys just have a dirty environment I'm not sure.
No with like 17 cfm is the porphus Better? it seemed to have low fog too.
Yes if you have enough CFM then the profit is definitely the way to go. But for these guys with those little compressors this Then kicks ass
@@thetriggerman954with the porphus does it have less fog like the Drizzle? I have plenty of air for any gun, but no booth so I'm wanting a gun that has less overspray fog. I'm not really worried about the CFM or price....just that it lays out a nice finish and has reduced fog.
@stephenwhite5444 yes definitely less dog similar to the deizzle
when you said higher pressure,do you remember exactly..i assume full fluid full fan
It was closer to 40 psi and yes full fan and fluid.
Looks good trigger.....nice job !
Right on thank you David 👊🏼
Thank you Triggerman. Another lesson learned. I m gonna try this gun . Good deal 3 tips on the deluxe setup. . Question. What compressor do you recommend CFM wise for professional use? Keep on triggering!!!
I personally like Ingersoll Rand air compressors. And you should be good with a 60 gallon. Something like this and you'll never have issues
amzn.to/4cCHINK
No drama nice work trigg 😊😊😊
@@deanbrown7643 peace my brother no drama ✌🏼🕊️
@@thetriggerman954 hope all is good across the pond bruh
Would that gun give off less fog than the black widow HTE? Or any other gun aorund that price. Need something that wont piss the neighbors off lol. Keep up the videos bro
@@clayp.6802 yes this gun gives off a fraction of the over spray as the black widow. Especially if you use the link in the description it's tuned up for even less overspray
@@thetriggerman954 bet thanks man 👍🏻
I’ve sprayed with this gun for awhile maybe 200+ cars and after awhile just turned to garbage fan pattern would constantly change no matter what this and the a610 both terrible after some abuse. Kiawami 4 is the best budget gun by 1000% along with black widow 2.0
You painted over 200 cars with a $70 gun. Sounds like a good gun. It paid for itself 10000 X
@ it definitely paid for itself and I know it’s not high end built but they to hyped up on RUclips
Are you using full pattern?
Good coverage and peel in the end?
Thank you.
Half of a turn in and yes good coverage and a good Factory peel
Thank you
If the pro bundle is bought with this gun it comes with a 1.3 and 1.7... is 1.7 too large for automotive paints or is is ok for high build primer only
@@josephb31471.7 is only for 2k primer
What tip on the Inkocraft gun good for primer, metallics and clear coat? Comes with three tips: 1.3, 1.5 and 1.7
@@georgepetrillo7316 1.7 for primer
@@thetriggerman954 The 1.3 would be suitable for the metallics and clear?
@@georgepetrillo7316 yes sir. That's standard
another very good video of information
Thank you! Glad you enjoyed it
Love this gun ..I got two of them . 😊
@@ericthomas7194 alright now dirty harry.
Yea I been using the hell out if it I bought it over a year ago 💯 the indocraft
@@2koolforyou88 Yes sir, it gets the job done for sure. Good to know that it's holding up
Any suggestions on a affordable base clear brand looking to buy jet black
Still ain’t no lph400 but great review as always sir.
Lol facts. Thank you
Just bought this gun will be my first LVLP gun. Is PPG omni a good paint to start with?
@@SpeedGasmEvo9 bottom of the barrel in my opinion. If it doesn't look good don't think it's you as a painter. That stuff is extremely cheap and harder to make it look good. Just my honest opinion
Great video!
Nice ima definitely try this gun out for sure 👍🏾 🔥🔥
Not a bad idea 💡 but you know what is a bad idea? Spitting on the customers car 😉😂😂😂😂😂😂😲😲
I have the r500 already and agree it is a fog machine lol. I already have good guns and I'm tempted to try this gun but you said it's a lvlf. The only innokraft d1 I see is a lvlp. Am I missing something?
@@FlakeBoss 🤦🏼♂️ it's an LVLP gun. The LVLF was me being funny saying Low Fog LF I said that in the video. I think you'd love the gun
Lol ok I just wanted to be sure. Now I'm gonna sit back and read some of the comments of all the painters you pissed off by not doing the R and I. Lmao. By the way I just want to thank you for being real on your videos. There are so many "painters" on RUclips that sound like a robot when they shoot their videos. It really bugs me, thank god you don't do it.
A quick question please TriggerMan. do you put thinners in your clear coat? thanks
@@davekennedy-ex6qk Never, I've made several videos saying NOT to add reducer unless The manufacturer calls for it. If it says reducer is part of the mixing ratio then I'll add it.
@@thetriggerman954 Thanks TriggerMan much appreciated
Sweet! I've only heard good things about this gun.
I Triggerman approve this message 💪🏼
Hi TriggerMan, How do you like the face mask respirator? I have the half mask but thinking about the full mask to cover my eyes. Those paint fumes are bad and I'm sure they are not good for ones eyes. Thanks.
I'm happy with it. I use a cheaper mask just be sure to get good 3M filters. Took a few weeks to get use to now It's easy breazy. Also be sure to get the replaceable lens sheets
We getting out the driveway with this one!
Ain't that the truth lol
HI TRIGGERMAN GOOD VIDEO THAT THANKS FOR SHARING THAT INFORMATION ARE YOU TRAINED UP ON GALSUITE 💯
have you tried Summit Racing 2 stage paint and clear?
@@calipirate7605 no I don't think I've ever heard of it
sic is this is a good gun for clear been wanting a clear gun in this style
This will get the job done for you. Link in the description and it comes with the triggerman tune on it already 😉👊🏼
I just bought this gun and waiting for it to come in. Do you like it better than the Aeropro A610?
10 x Better
@@thetriggerman954 now I’m really excited to get this gun and use it
what will happen if you use a different paint reducer with a with a different company paint reducer
@@Soul1AnimeAMVs nothing at all
Triggerman time 👍👍
Yes sir. Good Friday 😁
Whats the CFM? Is it lower then 4? The Eastwood concourse is 4.5
@@chrisdamonsworld I think it was like 8 or 9. Sprays 10 times better than th Eastwood I have both.
Hey, this spray gun looks the same as the aeropro a610, I have one
@@rafalcegiel6351 I tried that gun they do look similar but doe some reason this gun sprays better to me. I didn't care for the a610
No filteration? What do you so about water?
No filtration. I didn't see any water 🤷🏼♂️ lol
Hell ya. Need to get
Me an LVLF so my neighbors stop giving me the stank eye!! lol
@@jonnyditto4440 better a stink eye than a hit from a sling shot... Hey you're getting overspray all over my wife's car 🚗 💨💨
That 13 gallon vevor compressor is on my list.
@@silvercommander good for little quick stuff like this. No problems
Yo! Trigg, what type of filtration you got going with that set up. Got a 27 gallon comp from HF. And I'm stuck on what I need filtration wise.
I didn't put any thing on it. Lol just hose and gun. 🤞🏼
@@thetriggerman954 Mann. Nothing to it, but to do it, I guess! 🤞🏼thanks for the reply!
What pressure did you use for this gun? Since you said a bit higher than usually...
Sorry about that 35 psi
@@thetriggerman954 Thanks man!
Tell her trig tell her what’s up 🤣🤣🤣🤣
😉 hot momma aye 😁
The R500 and the D1 are licensed and made by several different names but are basically the exact same gun.
Well they spray much different. That's for sure.
What would you say the biggest differences are? I only use an r500 right now. Thanks! @thetriggerman954
@@snapfly7 The biggest difference is the amount of overspray they put off mostly everyone that commented backs up what I'm saying and they all said that it produces a lot of overspray / fog in the air The D1 does not produce nearly half as much as the r500. So there is a huge difference That dude doesn't know what he's talking about.
Bro I love fogging up my driveway hahah lol.
I'm sure your neighbors love you. Or maybe you're lucky enough not to have neighbors 😝
Still waiting on that Finish 1 clear review Trigger!
Everyone has been telling me it's dying back on them. I get tons of messages on here and private say they stop using it. And to be honest I don't want to create more work for myself if that stuff is not going to work. I've had at least 30 people tell me they are switching from it.
Hey trigger, I purchased the lt100 concours (Eastwood) lvlp. You think a 27 gal 5.1 cfm at 90 compressor would do ok spraying 1c8 paint code.
I’m am a novice never sprayed before so anything advice you give is much appreciated.
@@fluorescentmug8333 Guess that should be fine with a 27 gallon compressor. That's pretty much the same gun as the r500 and I did nice size jobs with this 13 gallon compressor so you're a little over double than what I have so you should be fine.
Been tempted to drive my car to you or fly you out to paint my car trigger, great content. Thank you
Hey bro can you make a video of spraying an entire car with a 13 gallon compressor .im sure alota followers would like to see if thats possible
I'm down to do risky but not clown stuff I do things that I know will work. And that shit won't work
@@thetriggerman954 how many gallons and what cfm would you need to spray entire car with this gun ?
@@secula1234 probably 25-30 gallon. And the gun requires Abt 5 CFM so really anything above that would be ideal
New to your channel. Do you have videos that go over blending two different colors by chance?
@@michaelchaney3101 welcome to the channel. When you say blending two different colors you mean like blending two completely different paint codes into one? If so no I don't have anything like that on my channel. What would be something that you would use that for? Just curious
@@thetriggerman954 my fault 🤦🏾♂️ I meant like fade into another color. Thank you for the quick response.
TRIGGERMAN... YO... TRIGGERMAN?!? NO freakin bullshit... NO David Copperfield effects... NO mi ni mo Yes Mam... just a wet garage, fresh well mixed paint, 13 gallon air pump, great preparation (85% of the work), right hand dancing valse with that "LVLGBT Q U NO FOG GUN" inoKRAFT... SMOOTH... SLICK... DOPE PAINT JOB! Keep them coming and just a note... envy green-trolls grey... Let those Shrecks bitching!!! Big shout out from the middle of the Atlantic!!!
@@mikefreitas1331 yoooo thanks brother. You said a mouth full on that one 🤣 I appreciate you Mike 👊🏼👊🏼
@@thetriggerman954 you're welcome Bro. Thanks for all the tips and videos.
What pressure you runnin from the gauge for clear my guy? I'm about to grab one of these. I already have the A610
35 psi, I tried the a610 and wasn't really impressed even though they are supposed to be similar. I really like this gun
@@thetriggerman954 It's crazy these LVLP guns run at such a high PSI. A lot of other vids I've seen on them run them under 20 PSI. All I know is I'm sick of orange peel in my clear! 🤣
What were your gun setting dr. trigger man?
35 psi full fan. 3 turns out from closed on the fluid.
what gun is that? All i heard was lcraft?
@@michaelmenard8913 inokraft D1 there is a link in the video description for the version I used.
Trigger can I paint my Harley Davison with this one ?
Hell yeah, perfect for that more than enough air and gun 🫡
@@thetriggerman954 keep pushing that 🔥 big love and much respect 🫡 from Richmond Va, checking in, tell the next one💪✌️
Is the the gun in your link? I was looking for LVLF but its showing LVLP
The gun in the link is the one in used in the video. With a special Triggerman tune up for anyone that uses my link
That gun is the R500 but with a different body If you don't believe me, put the nozzles, needles and nozzle from one to the If you don't believe me, put the nozzles, needles and nozzle from one to the other😎
So why does this one produce less than half of the over spray? 🤔
@@thetriggerman954 Check them out well, but that gun, the aeropro A610 la rongpeng And the Yuan tie yt160 are the R500 lvlp, I have all the only thing that changes are the manufacturing qualities
maybe i missed it but what tip trig?
@@alexhuevera939 1.3 tip 💪🏼