BEST Mods For Your Toyota GR86

Shop Merch, Aftermarket Car Accessories and More! - shop.torquemotorsport.io/
Download Torque Drift 2 for free here - store.epicgames.com/en-US/p/t...
Today, Alex talks to you about the BEST mods you can add to your Toyota GR86. These simple but practical mods will change the way you not only see your car but the way you drive your car. We understand the GR86 doesn't have the most power but with this step by step guide you'll be able to squeeze every drop of horsepower out of your GR86 for the ultimate driving experience!
#drifting #gr86 #toyota
Do you want to see more of these videos? Let us know down below!
Stay tuned and don't forget to Like, Comment & Subscribe! :)
-----------------------------------------------------------------------------------------------------------------------
Instagram: torquemotor...
Twitter: / trqmotorsport
Facebook: search/top?q...
Discord: / discord
Shop: torquemotorsport.io/
-----------------------------------------------------------------------------------------------------------------------
Time Stamps
0:00 Intro
0:10 Torque Drift 2 Update
0:54 Angle Kits
1:51 Exhaust
2:15 Cold Air Intake
3:11 Coilovers
4:00 RTV Fix
4:44 Aero
5:06 Outro

[@ScottyBeMore]

Its not really the rtv, its the right hand turn oil pressure dip with that said, 1/2 pt. over fill seems to be the best fix atm

[@fendii.p]

i’m considering purchasing this car but i been watching many videos and a lot of ppl have been mentioning that. the rtv the oil pressure dip etc. however if i purchase this gr86 with the intention of just using it as a daily driver like going to work would i have this issue you think? like i have zero interest in taking it out to a track nor do i intend to purposely be trying to be driving fast yknow.

[@ScottyBeMore]

I do the 1/2 pt overfill cause it won't hurt nothing only helps and as a daily with some spirited driving you can't push the car hard enough to even come close to hurting it in any way @@fendii.p

[@zachariewinn1623]

@@fendii.p I own one and as long as you don’t track it, then it won’t be a problem

[@VinRZ]

Alex, you're a really entertaining youtube personal.
But for God sake, stay in the drifting scene. Your recommendations on track / autox are just purely comical.
No don't get more power, no don't just drop a set of Chinese coilovers in, no don't put aero kit on the car.
Get brake pads, brake fluid, and oil cooler into the car. Then, a few events later, you, yes, I mean you (alex), get some camber plates and rear upper control arms. This is all you need if you aren't looking to compete.
Tires and rims can come later.
Point is to maximize the stock setup. Spend as much money on seat time as possible.

[@PapiJadan]

Hey I’m from BOSTON MA My gr86 engine blew up with rtv it’s currently being fixed right now they just replaced the block now just awaiting for discharge papers

[@yeonboy1]

i dont think anybody who actually knows about cars would follow this mod list

[@CruiseControl1]

Best way is to protect this glass engine is treat like a nascar only turn left.

[@Pplwithnoname]

K&n intake and mtec clutch spring were really nice mods i cannot lie

[@Themis187]

the most important is the short shifter😅

[@kevind_53]

I gained an average of +3dB accross the mid to upper rpm range when I installed my k&n intake on my first gen BRZ wich is noticeable
🚗💥💨🔥

[@brandyoverly3485]

A mustang II COUP OR GHIA

[@arefinlabib4630]

but how do you get rid/fix that torque diipp??!!

[@cadkoon2247]

That was only on the 1st gen 86/brz not the 2nd gen

[@Carlos.Rivera]

Force induction or engine swap

[@jaron95]

@@cadkoon2247 It's still there on 2nd gen but it's much more mild. According to dyno graphs I've seen (@StratifiedAuto channel), swapping to unequal length headers will smooth out the torque dip even more.

[@burntbean566]

Didn’t say what to get to fix the rtv issue 🙃

[@jaron95]

The Room Temperature Vulcanizing silicone sealant is used in several places across the whole FA24 engine. The "fix" is to remove the oil pan and clean out any RTV stuck in the oil pickup tube once the engine has been broken in. Dassit. No extra parts needed.

[@user-ix9hl4uw5i]

Can you talk like a normal person???

[@christophe_george]

He does have that 'son of Scotty Kilmer' thing going.

[@robertotejeda1613]

He's fake af

[@literallyfiguratively]

+35 horsepower from a header and a tune 😂😂😂 how do I make it so this channel never shows up in my feed again?

[@subuguru3]

Welcome to BRZ/GR86 life. If you want a fast car get something else

[@itisallaboutspeed]

as a car content creator i approve this video

[@amaterasu_chan1]

I better put all Blitz parts